Can you plz help me!!!!!!!!!!!!!!!!!!!!!!!

Given:

Consider the line segment YZ with endpoints Y(-3,-6) and Z(7,4).

To find:

The y-coordinate of the midpoint of line segment YZ.

Solution:

Midpoint formula:

[tex]Midpoint=\left(\dfrac{x_1+x_2}{2},\dfrac{y_1+y_2}{2}\right)[/tex]

The endpoints of the line segment YZ are Y(-3,-6) and Z(7,4). So, the midpoint of YZ is:

[tex]Midpoint=\left(\dfrac{-3+7}{2},\dfrac{-6+4}{2}\right)[/tex]

[tex]Midpoint=\left(\dfrac{4}{2},\dfrac{-2}{2}\right)[/tex]

[tex]Midpoint=\left(2,-1\right)[/tex]

Therefore, the y-coordinate of the midpoint of line segment YZ is -1.

Step-by-step explanation:

It is Graph B. We can do this by checking the points. The equation given is d = 5t^2, where d technically is the y-coordinate and t is the x-coordinate. On Graph B, two obvious points are (1, 5) and (2, 20). We can check these points to see if they fit the equation.

(1,5): d = 5t^2

5 = 5(1)^2

5 = 5*1

5 = 5, so this point is correct.

(2, 20): = d = 5t^2

20 = 5(2)^2

20 = 5*4

20 = 20, so this point is correct.

We know that Graph A is incorrect because it doesn't follow the equation. The line goes through (1, 5), which we already know is correct, (2, 10), (3, 15), and (4, 20). We already figured out that (2, 20) is correct so (2,10) can't be correct. (3, 15) and (4, 20) are also incorrect but in this case, we only need to find one incorrect coordinate to validate our answer. Thus, as Graph A is wrong, Graph B is right.

The volume (V) of the given cylinder with the height 10 mm and the diameter 14 mm is 1538.6 cubic millimeter.

From the given figure, diameter of a cylinder = 14 mm and height = 10 mm.

Here, radius = [tex]\frac{14}{2}[/tex]

= 7 mm

Volume is the measure of the capacity that an object holds.

Formula to find the volume of the object is Volume = Area of a base × Height.

We know that, the formula to find the volume of a cylinder is [tex]\pi r^2h[/tex].

Here, the volume of a cylinder = 3.14×7²×10

= 3.14×49×10

= 1538.6 cubic millimeter

Therefore, the volume (V) of the given cylinder with the height 10 mm and the diameter 14 mm is 1538.6 cubic millimeter.

To learn more about the volume visit:

https://brainly.com/question/13338592.

#SPJ4

Answer:

4√6

Step-by-step explanation:

cot60➜4√2/t

➜1/√3=4√2/t

➜t=4√2√3

➜t=4√6

Answer:

[tex]2\sqrt{2}[/tex] = t

Step-by-step explanation:

Sin(30) = t / [tex]4\sqrt{2}[/tex]

Sin(30) * [tex]4\sqrt{2}[/tex] = t

[tex]2\sqrt{2}[/tex] = t

Hope this helps!

we know that

1 ft--------> is equals to 12 in

the ramp is 12 inches tall----------> 1 ft tall

A ramp measures------------------>  6 ft long

applying the Pythagorean theorem

c²=a²+b²

where

c-----> 6 ft long

a----> horizontal distance

b-----> 1 ft tall

a²=c²-b²------> a²=6²-1²-----> a²=35------> a=√35------> a=5.92 ft

the answer is

5.92 ft

Answer:

6.08 or so

Step-by-step explanation:

The height is 1 foot, while the length is 6 feet.

You can use the Pythagorean Theorum to solve this, as you plug in the values.

The theorum states that A squared plus B squared = C squared, where A is  the length, and B is the width. (It doesn't matter if A is the width and B is the length either.)

So if we plug in the values:

1 squared plus 6 squared = C squared.

1 + 36 = 37

Since it is C squared, we can find the square root of 37, which is something like 6.0827625302982196889996842452021.

So usually we round to the hundredths place, so we can use 6.08.

Answer:

92.736

Step-by-step explanation:

A = L* W

A = 4.8 * 19.32

A = 92.736

Answer:

T = -3

Step-by-step explanation:

No explanation needed ...

Answer:

10 / 26

Step-by-step explanation:

cos <Z = adjacent / hypotenuse

= YZ / XZ

= 10 / 26

Answer:

Cos of an angle by definition of its ratio is side adjacent/hypotenuse.  The side adjacent to angle Z cannot be the hypotenuse, so it has to be 10. he hypotenuse is 26.  Therefore, cosZ= 10/26 = 5/13

Step-by-step explanation:

MRK ME BRAINLIEST PLZZZZZZZZZZZZz

Answer:

77777

is correct answers

The coordinates of the point on the unit circle at the given angle 180 degrees is (-1, 0).

A unit circle is just a circle that has a radius with a length of 1. A unit circle can be used to define right triangle relationships known as sine, cosine and tangent. These relationships describe how angles and sides of a right triangle relate to one another.

The given drawing is the graph of the unit circle on the X – Y Coordinate Axis.

It can be seen from the graph, that the unit circle is defined as having a Radius ( r ) = 1.

Going from Quadrant I to Quadrant IV, counter clockwise, the Coordinate points on the axis of the unit circle are:

(1, 0), (0, 1), (-1, 0), and (0, -1)

This is important to remember when we define the X and Y Coordinates around the unit circle. The Unit Circle has 360°. In the given graph, the Unit Circle is divided into 4 Quadrants that split the unit circle into 4 equal pieces. Each piece is exactly 90°.

From the diagram we can clearly say that the coordinates of the point on the unit circle at the given angle 180 degrees is (-1, 0).

Find out more information about unit circle here

https://brainly.com/question/11987349

#SPJ2

Answer:

d supplementary angle is s answer to me

Answer:

Venmo mee

Step-by-step explanation:

Answer:95

Step-by-step explanation:

Answer:

The measure of the angle is 120 degrees

Step-by-step explanation:

Here, we want to find the measure of the angle

Mathematically, the sum of angles at a point ( the center of the circle in this case) is equal to 360 degrees

We have the measures 150 degrees and 90 degrees; by adding this two and subtracting from 360, we will have the measure of the the marked angle

Thus, we have this as;

360 - (150 + 90)

= 360-240

= 120

Answer:

a) 0.3.

b) 1.117287138  to  9 dec. places.

d)3.

Step-by-step explanation:

a and d: the powers 1/3 and 0.333... is  the cube root.

c: 0.5 = the square root.

b is found using a calculator

Answer:

Step-by-step explanation: Since the given problem states that the two angles, angle 1 and angle 2 form a linear pair, this means that they form a 180° line, so that:

measure angle 1 + measure angle 2 = 180°

Since measure of angle 2 is six more than twice the measure of angle 1, therefore:

measure angle 2 = 2 (measure angle 1) + 6

hence, substituting this into the first equation:

measure angle 1 + 2 (measure angle 1) + 6 = 180

3 (measure angle 1) = 174

measure angle 1 = 58°

Therefore,

measure angle 2 = 2 (measure angle 1) + 6

measure angle 2 = 2 (58°) + 6

measure angle 2 = 122*

Option (A) 1 foot by 2 feet and option (C)  2 feet by 1 foot satisfy the perimeter given. Thus options A and C are correct.

"A Rectangle is a four sided-polygon, having all the internal angles equal to 90 degrees. The two sides at each corner or vertex, meet at right angles".

For the above situation,

The length of the rectangle be 'l'

The breadth of the rectangle be 'b'

Perimeter of the rectangle, P = 2(l+b)

Option A : 1 foot by 2 feet

Here, l = 1 feet and b = 2 feet

⇒ [tex]P=2(l+b)[/tex]

⇒ [tex]P=2(1+2)\\[/tex]

⇒ [tex]P=6[/tex]

This perimeter is equal to the perimeter of the rectangle. Thus option A is correct.

Option B : 1 foot by 5 feet

Here, l = 1 and b = 5 feet

⇒ [tex]P=2(1+5)[/tex]

⇒ [tex]P=12[/tex]

This perimeter is not equal to the perimeter of the rectangle. Thus option B is not correct.

Option C :  2 feet by 1 foot

Here, l = 2 and b = 1 feet

⇒ [tex]P=2(2+1)[/tex]

⇒ [tex]P=6[/tex]

This perimeter is equal to the perimeter of the rectangle. Thus option C is correct.

Option D : 2 feet by 4 foot

Here, l = 2 and b = 4 feet

⇒ [tex]P=2(2+4)[/tex]

⇒ [tex]P=12[/tex]

This perimeter is not equal to the perimeter of the rectangle. Thus option D is not correct.

Option E :  3 feet by 3 feet

Here, l = 3 and b = 3 feet

⇒ [tex]P=2(3+3)[/tex]

⇒ [tex]P=12[/tex]

This perimeter is not equal to the perimeter of the rectangle. Thus option E is not correct.

Option F : 4 feet by 2 feet

Here, l = 4 and b = 2 feet

⇒ [tex]P=2(4+2)[/tex]

⇒ [tex]P=12[/tex]

This perimeter is not equal to the perimeter of the rectangle. Thus option F is not correct.

Option G : 5 feet by 1 foot

Here, l = 5 and b = 1 feet

⇒ [tex]P=2(5+1)[/tex]

⇒ [tex]P=12[/tex]

This perimeter is not equal to the perimeter of the rectangle. Thus option G is not correct.

Hence we can conclude that option (A) 1 foot by 2 feet and option (C)  2 feet by 1 foot satisfies the perimeter given. Thus options A and C are correct.

Learn more about the rectangle here

https://brainly.com/question/4074407

#SPJ2

Answer: There is a total of 36 slices of pizza.

Answer:

X=4, y=5

Step-by-step explanation:

5x + 4y =40 equation 1

6x + 4y =44 equation 2

-1(5x + 4y)=-1(40) multiply equation 1 by -1 so equation will eliminate y

-5x - 4y=-40 modif equation 1

6x + 4y= 44  equation 2

         x=4.     Add above 2 equations

solve for y:

5x + 4y =40

5(4)+4y=40

20+4y =40

4y=20

y=5

check solution ;

6x+4y=44

6(4) + 4(5)=44

24 + 20=44

44=44

Answer:

x = 12 degrees

Step-by-step explanation:

m < LNM = (70+136)/2

= 206 / 2

= 103 degrees

So 7x + 19 = 103

7x = 103 - 19 = 84

x = 84/7

x = 12.

Answer:

22x^2+21x+10

brainliest?

Step-by-step explanation:

Answer:

The 4the bubble

Step-by-step explanation:

It is pretty much combining like terms. 22x² is alone since there is no other variable that has an x², so it will be left alone. However, there is 14x and -7x, they both have an x, so that makes them like terms. Combine those and you get 14x minus 7x which is 7x. The number 10 has no other like term to combine with so it can be left alone as well, so just put them all together in the end (simplify). Which would be 22x² + 7x + 10

Answer:

  -63a+14a+56-3a

= -52a+56

Here we need to use algebraic properties to simplify an expression, we will get:

[tex]7\cdot (-9\cdot a + 2\cdot a + 8) - 3\cdot a = -52\cdot a + 56[/tex]

The mathematical property we need to use is the distributive property.

[tex]A\cdot (B + C) = A\cdot B + A \cdot C[/tex]

So we start with the expression:

[tex]7\cdot (-9\cdot a + 2\cdot a + 8) - 3\cdot a[/tex]

First, we use the distributive property in the first term so we get:

[tex]7\cdot (-9\cdot a + 2\cdot a + 8) - 3\cdot a \\\\= 7\cdot (-9)\cdot a + 7\cdot 2 \cdot a + 7 \cdot8 - 3\cdot a\\\\= -63 \cdot a + 14\cdot a + 56 - 3\cdot a[/tex]

Now we use the distributive property in the other way, we take "a" as a common factor:

[tex]-63 \cdot a + 14\cdot a + 56 - 3\cdot a\\\\= (-63 + 14 - 3)\cdot a + 56\\\\= -52\cdot a + 56[/tex]

Here we got the simplified expression.

If you want to learn more, you can read:

https://brainly.com/question/403991

Answer:

b² =  13.2

Step-by-step explanation:

5.8²+b²=14.4²

33.64+b²=207.36

-33.64       -33.65

b²= √173.71

b² = 13.1799089526

b² =  13.2

Answer:

[tex](-9.5,2.63)[/tex]

Step-by-step explanation:

In essence, this problem asks one to find the vertex of the given equation. An easy way to find the vertex of a quadratic equation in standard form is to complete the square.

Completeting the square involves grouping the quadratic and linear term, then factoring out the coefficient of the quadratic term. After doing so, one will add a term to make the grouped terms a perfect square trinomial and then balance the equation. Finally, one will simplify the equation and get the quadratic equation in vertex form. From there, finding vertex is quite easy, the x-coordinate is the additive inverse of the quadratic term, and the y-coordinate is the constant.

Once a quadratic equation in standard form has been converted to vertex form by the process of completing the square, its equation is amongst the lines of the following,

[tex]a(x-k)^2+h[/tex]

(k, h) is the vertex of the parabola.

The quadratic equation in standard form,

[tex]2x^2+19x+42.5[/tex]

Group the quadratic and linear terms,

[tex](2x^2+19x)+42.5[/tex]

Factor out the coefficient of the quadratic term,

[tex]2(x^2+9.5x)+42.5[/tex]

Add a term to make the grouped part a perfect square trinomial, then balance the equation,

[tex]2(x^2+9.5x+22.5625)+42.5-2(22.5625)[/tex]

Simplify,

[tex]2(x^2+9.5x+22.5626)+42.5-45.125[/tex]

[tex]2(x+9.5)^2+2.625[/tex]

The vertex of the equation is the following,

[tex](-9.5,2.625)[/tex]

Rounded,

[tex](-9.5,2.63)[/tex]