Answer: A. 25%
Explanation: Ap3x
How does a recessive allele “show up” to be seen?
Answer:
Recessive alleles only show their effect if the individual has two copies of the allele.
Explanation:
Dominant and Recessive Alleles If your allele pair is FF or Ff, you will have freckles. The only way you can escape a freckled face is to inherit the recessive gene from each parent, giving you the ff allele pair. In general, recessive alleles show up in your phenotype only if you have two of them.
Tom used 75 N of force to push a box 3 meters across the floor. How much work did he do?
0.12 J
25 J
1
78J
225 J
Answer:
It must be 225 J.
Explanation:
According to
Work done = Force × distance travelled
= 75 × 3
= 225 J
This answer is taken so since no angles are stated in the question.
Which material is a conductor?
A. chalk
B. lead
C. leather
D. paper
E. rubber
B. Lead is a conductor....
Two point charges of +20.0 μC and -8.00 μC are separated by a distance of 20.0 cm. What is the intensity of electric field E midway between these two charges?
Answer:
The intensity of the net electric field will:
[tex]E_{net}=E_{1}+E_{2}=2.52*10^{7}\: N/C[/tex]
Explanation:
Here we need first find the electric field due to the first charge at the midway point.
The electric field equation is given by:
[tex]|E_{1}|=k\frac{q_{1}}{d^{2}}[/tex]
Where:
k is Coulomb's constantq(1) is 20.00 μC or 20*10⁻⁶ Cd is the distance from q1 to the midpoint (d=10.0 cm)So, we will have:
[tex]|E_{1}|=(9*10^{9})\frac{20*10^{-6}}{0.1^{2}}[/tex]
[tex]|E_{1}|=1.8*10^{7}\: N/C[/tex]
The direction of E1 is to the right of the midpoint.
Now, the second electric field is:
[tex]|E_{2}|=k\frac{q_{2}}{d^{2}}[/tex]
[tex]|E_{2}|=(9*10^{9})\frac{8*10^{-6}}{0.1^{2}}[/tex]
[tex]|E_{2}|=7.2*10^{6}\: N/C[/tex]
The direction of E2 is to the right of the midpoint because the second charge is negative.
Finally, the intensity of the net electric field will:
[tex]E_{net}=E_{1}+E_{2}=2.52*10^{7}\: N/C[/tex]
I hope it helps you!
The net electric field midway between these two charges is 2.52 x 10⁷ N/C.
Electric field strengthThe electric field strength between two point charges is the force per unit charge.
Electric field strength due to +20.0 μC charge
[tex]E _1 = \frac{kq_1}{r^2} \\\\E_ 1 = \frac{9 \times 10^9 \times 20 \times 10^{-6}}{(0.1)^2} \\\\E _1 = 18 \times 10^6 \ N/C[/tex]
Electric field strength due to -8μC charge
[tex]E _2 = \frac{kq_2}{r^2} \\\\E_ 2 = \frac{9 \times 10^9 \times 8 \times 10^{-6}}{(0.1)^2} \\\\E _2 = 7.2 \times 10^6 \ N/C[/tex]
The net electric field midway between these two charges is calculated as follows;
[tex]E_{net} = 18 \times 10^6 \ + \ 7.2 \times 10^6\\\\E_{net} = 25.2 \times 10^6 \ N/C\\\\E_{net} = 2.52 \times 10^7 \ N/C[/tex]
Learn more about electric field here: https://brainly.com/question/14372859
Two trucks have the same mass. Which truck will have a greater amount of kinetic energy? b. The truck with less mass d. The trucks will have the same kinetic energy c. The truck with greater speed a. The truck with more mass
Answer:
c. The truck with greater speed
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}MV^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents speed or velocity measured in metres per seconds square.
From the above formula, we can deduce that the kinetic energy of an object is directly proportional to the square of the value of its velocity or speed.
Hence, the truck with greater speed would have a greater amount of kinetic energy.
Answer:
The trucks will have the same kinetic energy.
Explanation:
Both of the trucks have the same mass, so they have the same kinetic energy. Hope this helps!
According to the law of reflection, what is the angle of incidence?
It is the angle the incident ray makes with a line drawn perpendicular to the viewer.
It is the angle the incident ray makes with a line drawn perpendicular to the reflecting surface.
It is the angle the incident ray makes with a line drawn parallel to the reflecting surface.
the angle of incidence is always equal to the angle of reflection,
Explanation:
Important Information. When light is reflected from a surface, the angle of incidence is always equal to the angle of reflection, where both angles are measured from the path of the light to the normal to the surface at the point at which light strikes the surface. This equality is known as the law of reflection.
Answer:
It is the angle the incident ray makes with a line drawn perpendicular to the reflecting surface
What is rising temperatures
Answer:
i don't know but have a good day
A marble is dropped into a graduated cylinder that is filled with water. Use the words
from the word bank to describe the speed and forces. Words may be used more than
once.
Point A: Speed
force
A
Point B: Speed
force
ml
Point C: Speed
force
30
B
20
is constant
increases
decreases
balanced
unbalanced
C
Answer:
v_t = [tex]\frac{2 g \ ( \rho_b - \rho_l ) r^2 }{9 \ \eta }[/tex]
Explanation:
Let's describe the motion and forces on the marble when it falls into the graduated cylinder filled with water.
Initially, the marble in the air falls under the influence of its weight (gravity force), when it enters the water, a friction force appears that INCREASES with SPEED and opposes the movement, this force is called Stokes force.
Fr = 6π R η v
where η is the viscosity of water
also because of this in a liquid it has an upward thrust, given by Archimedes' law, this thrust is CONSTANT
B = ρ_l g V_l
in that case the volume of liquid(V_l) is equal to the volume of the marble.
Constant force of gravity
W = mg
using the concept of density
ρ_body = m / V
W = ρ_body g V_body
we apply Newton's second law
Fr + B - W = ma
the friction force increases and the other two are constant, so acceleration decreases until reaching zero, at this point the forces are in BALANCE
Fr + B - W = 0
and the speed remains constant, being called TERMINAL SPEED
v_t = [tex]\frac{2 g \ ( \rho_b - \rho_l ) r^2 }{9 \ \eta }[/tex]
from this point on, the displacement is proportional to the time
A mother has the genotype Bb for brother green eyes, the months did heterozygous hair, what is the genotype of the father ?
Assuming brown hair (B) color is completely dominant over blond hair (b), then the father's genotype must be bb.
The Universal Space Agency wants to know the results of your Sim investigation. Write your report to the lead chemist, explaining why the staff can smell the chocolate bar. Use evidence from your investigation in your explanation.
Answer:
Condensation can also produce water droplets on the outside of soda cans or glasses of cold water. When warm air hits the cold surface, it reaches its dew point and condenses. This leaves droplets of water on the glass or can. When a pocket of air becomes full of water vapor, clouds form.
Explanation:
consider the circuit. find the equivalent resistance
Answer: 18 5.0 012
Explanation:
which type of star cluster forms from tightly packed groups or older stars ?
binary
eclipse
globular
open
Globular star clusters form from tightly packed groups and/or older ancient stars.
What are globular star clusters?Globular star clusters can be defined as ancient stars packed in a spherical and/or symmetrical shape.
Globular star clusters represent the most common types of groups (i.e., clusters) of ancient stars.
These groups of stars (globular) are characterized to be densest in the center of the cluster.
In conclusion, globular star clusters form from tightly packed groups and/or older ancient stars.
Learn more about globular star clusters here:
https://brainly.com/question/21379923
Oil is used in industrial hydraulic systems, because
A.) It naturally plugs any leaks in the system.
B.) It can be vented to the atmosphere.
C.) It is environmentally safe.
D.) It does not compress.
Oil is used in industrial hydraulic systems, because It is environmentally safe. Option C is correct.
What is hydraulic systems?Hydraulic systems work and accomplish tasks by utilizing a pressured fluid. Another way to say it is that the pressurized fluid makes everything operate.
Because of the tremendous power of liquid fuel in hydraulics, hydraulics are often utilized in heavy machinery.
Oil is used in industrial hydraulic systems, because It is environmentally safe.
Hence,option C is correct.
To learn more about hydraulic systems, refer:
https://brainly.com/question/9439349
#SPJ2
An electric circuit consists of light bulb with resistance of 10.0 ohm is connected to a
voltage source. The source provides a current of 2.00 mA in the bulb. What is the power
of the light bulb?
Answer:
P=I²R
Explanation:
P=2*10^-3 square times 10
4 times ten raise to power minus 5
which of the following best describes the function of a resistor in an electrical circuit?
Answer:
It controls the amount of current.
Explanation:
A resistor helps control and maintain the circuit which is it's main function.
Three dogs scout sparky and dusty are playing with a teddy bear. Scout and sparky are pullung the teddy bear to the left
Answer:
To the left side.
Explanation:
The teddy bear will move towards the left side because more force is applied by scout and sparky than dusty. The reason for this movement of teddy bear to the left is due to more force is applied by the two dogs present at the left side of the teddy bear while on the other hand, one dog is present at the right side of teddy bear which applied less force so that's why we can say that the teddy bear moves to the left side rather than to the right side.
The voltage in a battery is 9 volts. The resistance is 3 ohms. What is the current? USE CORRECT UNITS!
Answer: Lol “USE CORRECT UNITS!” I GOT YOU BABES: 9/3=3 current is 3 amperes.
Explanation:
5. What structure did Friedrich Kekule discover that allowed carbon atoms can bond
with up to four other atoms at the same time?
PLEASE HELP THIS IS BIG. ITS 2ND GRADE WORK BTW. HELP FOR CROWN AND POINTS!!!!
What did Ben Franklin show with his famous kite experiment?
that lightning is electricity
how sounds could be recorded
that electromagnetic waves could be found and turned into sound energy
how to create a battery
Answer:
your answer is A
Explanation:
brainliest plzzzz
Answer:
c is the correct answer
The gravitational force is 2336 N for an object that is 4.15 x 10^6 m above the surface of the Earth? The radius of the Earth is 6.378 x 10^6 m. (Earth's mass is 5.97 x 10^24 kg) What is the mass of the object above earth?
Answer:
34kg
Explanation:
A sled is at rest at the top of a slope 2 m high. The sled has a mass of 45 kg. What is the sled's potential energy?
(Formula: PE = mgh)
Answer:
PE = 882 J
Explanation:
Through the International System we know that the gravity of the earth is 9.8 m/s², so...
Data:
m = 45 kgg = 9.8 m/s²h = 2 mPE = ?Formula:
[tex]\boxed{\bold{PE=m*g*h}}[/tex]Replace and solve:
[tex]\boxed{\bold{PE=45\ kg*\ 9.8\frac{m}{s^{2}}*2\ m}}[/tex][tex]\boxed{\boxed{\bold{PE=882\ J}}}[/tex]The potential energy of the sled is 882 Joules.
Greetings.
RESPIRATION the exchange of gases between your body and your environment.
TRUE OR FALSE
true
Explanation:
because in physiology, respiration is the movement of oxygen from the outside environment to the cells within tissues, and the removal of carbon dioxide in the opposite direction.
4. When a key on piano is pressed, a sound is heard. What produces this sound?
A. the vibrating key of the piano
B.
The Vibrating String Of Piano
C. the finger pressing the piano key
D. the air molecules inside the piano
Answer:
D
Explanation:
since we press the key , air molecules ate presented and sound wave is formed what we hear.
Answer:
B
Explanation:
the vibrating string of pianoYou should set a reward for yourself for achieving a goal. A. True B. False
Answer:
A
Explanation:
Answer:
true
Explanation:
sup
A Normal force of 16N is distributed uniformly on top surface of a cube of edge 6cm. The
pressure on this surface is Rx104Pa. Find the value of R
Answer:
approx. 0.43
Explanation:
Area of the side of the cube is 36 cm or 0.36 m, P= F/A, so R*104=16/0.36, R*104≅44.44, R≅0.43
Match each concept to the scientist who supported it.
Thomas Young
Light is a wave that has similar properties
as radio waves
Christiaan Huygens
Light is a wave made of electric and
magnetic fields.
James Clerk Maxwell
Light is a wave because this property can
explain interference.
Heinrich Hertz
Light is a wave because it bends when it
hits barriers and openings.
Isaac Newton
Light is made of particles because it travels
only in straight paths.
Answer:
1. Heinrich Hertz.
2. James Clerk Maxwell.
3. Thomas Young.
4. Christiaan Huygens.
5. Isaac Newton.
Explanation:
Light wave can be defined as an electromagnetic wave that do not require a medium of propagation for it to travel through a vacuum of space where no particles exist.
However, the various definitions of light according to early scientists include the following;
1. Heinrich Hertz: Light is a wave that has similar properties as radio waves. Heinrich Rudolf Hertz was a German physicist born on the 22nd of February, 1857 in Hamburg, Germany. The unit of frequency ("Hertz") of an electromagnetic wave was named after him.
2. James Clerk Maxwell: Light is a wave made of electric and magnetic fields. James Clerk Maxwell was a Scottish physicist born on the 13th of June, 1831 in Edinburgh, United Kingdom. He was famously known for his work in the formulation of the classical theory of electromagnetic radiation.
3. Thomas Young: Light is a wave because this property can explain interference.
4. Christiaan Huygens: Light is a wave because it bends when it hits barriers and openings.
5. Isaac Newton: Light is made of particles because it travels only in straight paths.
Answer:
See image
Explanation:
Light wave can be defined as an electromagnetic wave that do not require a medium of propagation for it to travel through a vacuum of space where no particles exist.
However, the various definitions of light according to early scientists include the following;
1. Heinrich Hertz: Light is a wave that has similar properties as radio waves. Heinrich Rudolf Hertz was a German physicist born on the 22nd of February, 1857 in Hamburg, Germany. The unit of frequency ("Hertz") of an electromagnetic wave was named after him.
2. James Clerk Maxwell: Light is a wave made of electric and magnetic fields. James Clerk Maxwell was a Scottish physicist born on the 13th of June, 1831 in Edinburgh, United Kingdom. He was famously known for his work in the formulation of the classical theory of electromagnetic radiation.
3. Thomas Young: Light is a wave because this property can explain interference.
4. Christiaan Huygens: Light is a wave because it bends when it hits barriers and openings.
5. Isaac Newton: Light is made of particles because it travels only in straight paths.
How many valence electrons does the hydrogen and oxygen have in the following picture?
Answer:
can u make the picture less blurry pls
Explanation:
How do the nuclei of covalently bonded atoms help keep the bond together?
Neutral particles in the nucleus provide enough mass that the force of gravity holds the atoms together.
Neutral particles in the nucleus can become positive or negative in order to balance the charges.
Positive particles in the nucleus change into negative particles that enter electron shells.
Positive particles in the nucleus are attracted to shared electrons, so the atoms stay close together.
Answer: D.
Explanation:
Answer: The answer is D
Explanation: I got it right on my test
que es el periodo de un pendulo
Answer:
what
Explanation:
Answer:
El periodo del péndulo simple, para oscilaciones de poca amplitud, viene determinado por la longitud del mismo y la gravedad.
Explanation:
No influye la masa del cuerpo que oscila ni la amplitud de la oscilación. Donde: T: Periodo del péndulo.
I really need help
John's mass is 55kg when he is standing on the edge of a diving
board 24m high. a. Find his mechanical energy.
What is it?
Answer:
E = 12.9 kJ
Explanation:
Given that,
Mass of John, m = 55 kg
It is standing on the edge of a diving board which is at a height of 24 m.
We need to find his mechanical energy. The mechanical energy of John is equal to its potential energy such that,
E = mgh
E = 55 kg × 9.8 m/s² × 24
E = 12936 J
or
E = 12.9 kJ
So, his mechanical energy is equal to 12.9 kJ.