If you know that the period of a pendulum is 1.87 seconds, what is the length of that pendulum? (assume that we are on earth and that gravity is 9.81 meters/second². ) a. 0.87 centimeters b. 2.1 meters c. 1.6 meters d. 0.87 meters e. 8.3 meters

Answer:

B) Settling a dispute or disagreement

Explanation:

A conflict is a disagreement or argument between opposing parties.

A resolution is a solution to a problem.

Knowing both these definitions, the answer choice that makes the most sense would be B) Settling a dispute or disagreement.

Hope this helps!!

Answer:

T = 0.003 s

(Period is written as T)

Explanation:

Period = time it takes for one wave to pass (measured in seconds)

frequency = number of cycles that occur in 1 second

(measured in Hz / hertz / 1 second)

Period : T

frequency : f

So, if we know that the frequency of a wave is 300 Hz, we can find the period of the wave from the relation between frequency and period

T =  [tex]\frac{1}{f}[/tex]    f = [tex]\frac{1}{T}[/tex]

to find the period (T) of this wave, we need to plug in the frequency (f) of 300

T = [tex]\frac{1}{300}[/tex]

T = 0.00333333333

So, the period of a wave that has a frequency of 300 Hz is 0.003 s

[the period/T of this wave is 0.003 s]

The amount of heat energy that must still be removed by the cooling system is 1300 kJ.

The total energy before and after a transformation must be equal.

Based on this principle, the heat energy that must still be removed by the cooling system is calculated as follows;

Input heat energy = out put heat energy

E = h + w

2000 kJ = h + 700 kJ

1300 kJ = h

Thus, the amount of heat energy that must still be removed by the cooling system is 1300 kJ.

Learn more about heat energy here: https://brainly.com/question/7541718

#SPJ1

The multimeter setting should you use is between 11-12 volts. If the voltage is too high or too low, the power supply must be changed.

An instrument made to measure resistance, voltage, and electric current, often across a range of values.

You think your desktop computer's power supply is malfunctioning. To test the power supply, you should use a multimeter.

Between 11 and 12 volts should be seen on the multimeter. The power supply is failing and has to be replaced if it's too high or too low.

Hence, the multimeter setting should you use is between 11-12 volts.

To learn more about the multimeter refer:

https://brainly.com/question/5135212

#SPJ1

The statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).

Adaptation is an evolutionary process where a species fits certain environmental conditions.

Plant species are intrinsically vulnerable to climate change because they are adapted to certain climate (temperature) conditions.

In conclusion, the statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).

Learn more about adaptation here:

https://brainly.com/question/1213023

#SPJ1

Answer:

you will use the OTDR tool ti will very much so help

Explanation:

Answer:

[tex]46.482 cm[/tex]

Explanation:

[tex]Since 1 in = 2.54cm\\\\18.3 inches =(18.3 x 2.54) cm\\ =46.482cm[/tex]

Not sure what you mean by "breaks in the tension" but I suspect you mean the rope will come apart if the tension in the rope exceeds 1800 N.

In the free body diagram for the 500 N weight, we have a figure Y with the net force equations

• horizontal net force:

∑ F[hor] = T₁ cos(θ) - T₂ cos(θ) = 0

• vertical net force:

∑ F[ver] = T₁ sin(θ) + T₂ sin(θ) - 500 N = 0

From the first equation, it follows that T₁ = T₂, so I'll denote their magnitude by T alone. From the second equation, we have

2 T sin(θ) = 500 N

and if the maximum permissible tension is T = 1800 N, it follows that

sin(θ) = (500 N) / (3600 N)   ⇒   θ = arcsin(5/36) ≈ 7.9°

is the smallest angle the rope can make with the horizontal.

Nuclear fusion and fission involve changes in the nucleus of atom, but nuclear fission is  most  in employed nuclear power plants around the world whereas fusion occurs on the sun.

Nuclear fission is a reaction in which the nucleus of large atoms are split into nuclei of two or more smaller atoms.

Nuclear fusion is a reaction in which nuclei of two or more smaller atoms are combined to give an atom of larger nucleus.

Large amounts of energy are involved in both reactions.

The Sun produces energy by nuclear fusion.

However, the most commonly employed method in nuclear power plants is nuclear fission because the necessary conditions required for nuclear fusion have not being developed currently.

Therefore, nuclear fusion and fission involve changes in the nucleus of atom, but nuclear fission is  most  in employed nuclear power plants around the world whereas fusion occurs on the sun.

Learn more about nuclear fusion and fission at: https://brainly.com/question/3992688

#SPJ1

Smaller stars, like our sun, die by ejecting their outer layers of gas into space, resulting in the formation of a planetary nebula.

A planetary nebula is formed when a red giant ejects its outer atmosphere. A white dwarf is the carbon core of a star that has lost its photosphere.

This results in a one-of-a-kind and breathtaking creation known as a planetary nebula.

Smaller stars, like our sun, die by ejecting their outer layers of gas into space over a 10,000-year period, leaving behind the star's heated core.

Radiation from the white dwarf causes the gas to shine, resulting in a one-of-a-kind and stunning creation known as a planetary nebula.

The carbon core of a red giant that has evacuated its photosphere as a planetary nebula is a white dwarf.

Hence, Smaller stars, like our sun, die by ejecting their outer layers of gas into space type of star will form a planetary nebula

To learn more about the planetary nebula refer to:

https://brainly.com/question/1162533

#SPJ1

Answer:

In the hearts of stars:

Theory tells us the elements heavier than iron are created by novas

that is when a star explodes, and any heavier elements were once created when a star exploded.

Answer:

  94 kg

Explanation:

The mass registered by the scale is based on the assumption that the force applied is due entirely to gravity. If the force is greater, then the indicated mass will be greater.

__

As a fraction of the acceleration of gravity, the elevator's acceleration is ...

  (1.2 m/s²)/(9.8 m/s²) ≈ 6/49

The force required to produce a given acceleration is found by the formula ...

  F = ma . . . . . . . force on mass m to produce acceleration 'a'

When the man is stationary on the scale, the upward force it supplies is balanced by the downward force on the man due to gravity. The force and the mass are proportional, and the constant of proportionality (the acceleration due to gravity) is used to calibrate the scale. More force is thus translated to a higher mass reading.

Since the man's net acceleration is upward at the rate of 6/49×g, the total force applied by the scale is (1 +6/49) = 55/49 times as great as when the man is stationary. This greater force gets translated to a greater mass reading.

The force is equivalent to what would be required to support a stationary man with a mass of ...

  (84 kg)(55/49) = 94 2/7 kg

The scale would read about 94 kg during the upward acceleration period.

Metals tend to readily lose electrons and form cations. Most of them react with atmospheric oxygen to form metal oxides. However, different metals have different reactivities towards oxygen (unreactive metals such as gold and platinum do not readily form oxides when exposed to air

For sodium

For Magnesium

For potassium

Answer:

55 kg

Explanation:

Formula :

Force = mass × acceleration

=========================================================

Given :

⇒ Force = 220 N

⇒ acceleration = 4 m/s²

===========================================================

Solving :

⇒ 220 N = mass × 4 m/s²

⇒ mass = 220/4

⇒ mass = 55 kg

An audience member covers her ears during a loud concert shows evidence that matter can reflect waves.

An audience member covers her ears during a loud concert is an event that provides evidence that matter can reflect waves because a sound is heard again and again due to the reflection of waves. This repetition of sound is due to the property of reflection of sound waves.

So we can conclude that an audience member covers her ears during a loud concert shows evidence that matter can reflect waves.

Learn more about wave here: https://brainly.com/question/15663649

#SPJ1

Answer:

A laser beam bounces off a series of mirrors

Explanation:

The total distance covered by the locomotive (toy) during the first and second journey is 10500 meters.

D) The answer is not given in the Options.

Note that: Speed/velocity is distance traveled per unit time.

Speed = Distance ÷ time

Distance = velocity × time

Given that;

For the first journey,

For the second journey,

Distance covered in the first journey

Distance = velocity × time

Distance = 25m/s × 300s

Distance = 7500m

Distance covered in the second journey

Distance = velocity × time

Distance = 10m/s × 300s

Distance = 3000m

Total distance covered will be;

Total Distance = Distance covered in the first journey + Distance covered in the second journey

Total Distance = 7500m + 3000m

Total Distance = 10500m

Therefore, the total distance covered by the locomotive (toy) during the first and second journey is 10500 meters.

D) The answer is not given in the Options.

Learn more about speed here: brainly.com/question/7359669

#SPJ1

The statement that describes the magnetic field inside a bar magnet is as follows: it points from north to south.

A bar magnet is a permanent magnet of rectangular shape.

A magnet generally possess a magnetic field, which is a condition in the space around a magnet which there is a detectable magnetic force and the presence of two magnetic poles.

A bar magnet like every other magnet possesses a magnetic field that points from the north pole to the south pole.

Learn more about magnets at: https://brainly.com/question/13026686

#SPJ1

Answer:

The answer is B

Explanation:

When inflation increases, the cost of goods increases. The correct option is B.

Generally speaking, inflation raises the price of products sold. The price of producing and purchasing those things rises together with the prices of goods and services owing to inflation.

This can be attributable to elements like escalating manufacturing costs, rising input costs, and shifting dynamics of supply and demand.

As a result, companies might need to modify their pricing plans to take inflation-related cost increases into account, the cost of goods typically increases when inflation occurs.

Thus, the correct option is B.

For more details regarding inflation, visit:

https://brainly.com/question/33537821

#SPJ6

Answer:

a totally absorbing surface feels radiation pressure

Explanation:

When electromagnetic radiation strikes perpendicular to a flat surface, a totally absorbing surface feels radiation pressure

Answer:

0.56 Watt

Explanation:

Work done = 8 kJ = 8000J

Time = 4 hours = 4*60*60s = 14400sec

Power = ?

Formula of Power is,

Power = Work done / Time

Power = 8000/14400

Power = 0.56 Watt

Hence, Power of person is 0.56Watt.

[tex]\text{Power,}~ P = \dfrac{\text{Work done}}{\text{Time}}\\\\\\~~~~~~~~~~~~~=\dfrac{8 \times 1000~J}{4 \times 3600~ s}\\\\\\~~~~~~~~~~~~~~=\dfrac{80}{144}\\\\\\~~~~~~~~~~~~~~=0.56~ W[/tex]

Answer:

Explanation:

Energy used is power multiplied by time.

Power is energy used divided by time

8 kj is 8000 j

4 hours is 240 minutes

240 minutes is 14400 seconds

8000j divided by 14400 is 0.55 recurring, measured in watts

The mass of a rollercoaster car moving at a velocity of 30 meters/second and has a momentum of 2.5 × 104 kilogram meters/second is 8.3 × 10²kg.

The mass of the roller coaster car can be calculated using the following formula:

P = m × v

Where;

m = 2.5 × 10⁴ ÷ 30

m = 8.3 × 10²kg

Therefore, the mass of a rollercoaster car moving at a velocity of 30 meters/second and has a momentum of 2.5 × 104 kilogram meters/second is 8.3 × 10²kg.

Learn more about mass at: https://brainly.com/question/19694949

#SPJ1

The likely outcome when a magnetically soft material is placed in a strong magnetic field is that it will become a temporary magnet because the domains will easily realign.

A magnet is a material whose magnetic domains are properly aligned. These materials are able to attract other materials that are magnetizable.

Hence, the likely outcome when a magnetically soft material is placed in a strong magnetic field is that it will become a temporary magnet because the domains will easily realign.

Missing parts:

A magnetically soft material is placed in a strong magnetic field. What is the most likely outcome?

a. It will become a permanent magnet because the domains will remain aligned.

b. It will become a temporary magnet because the domains will remain aligned.

c. It will become a permanent magnet because the domains will easily realign.

d. It will become a temporary magnet because the domains will easily realign.

Learn more about magnets:https://brainly.com/question/14301573

#SPJ1

Answer: D or It will become a temporary magnet because the domains will easily realign.

Explanation: Taking the quiz!

If the kinetic energy of the train decreases from 314 J to 250 J, the gravitational potential energy of the system It increases from 2 J to 66 J.

The principle of conservation of mechanical energy states that the total mechanical energy of a system is always constant. This means that the sum of the potential and the kinetic energy does not change.

Thus, if the kinetic energy of the train decreases from 314 J to 250 J, the gravitational potential energy of the system It increases from 2 J to 66 J.

Learn more about mechanical energy:https://brainly.com/question/13552918

#SPJ1

Answer:

False

Explanation:

Scientific models are not always built to scale and may not be fully accurate

I really hope this is true. also pay no attention to this answer I'm doing it to finish my account

Answer:

True

Explanation:

See picture.

The minimum initial velocity that the ball must have for it to reach the top of the hill is 21 m/s. The correct option is D.

The mechanical energy is the sum of kinetic energy and the potential energy of an object at any instant of time.

M.E = KE +PE

A boy is trying to roll a bowling ball up a hill. The friction is ignored.  The ball must have to reach the top of the hill with a velocity. The acceleration due to gravity, g = 9.8 m/s²

The conservation of energy principle states that total mechanical energy remains conserved in all situations where there is no external force acting on the system.

M.E bottom of hill = M.E on top of hill

Kinetic energy + Potential energy = Kinetic energy  + Potential energy

1/2 mu² + 0 =  0 + mgh

At the top of hill, the velocity will become zero. So, final kinetic energy is zero.

Substituting the values, we have

1/2 x u² = 9.8 x 22.5

u = sqrt [2 x9.8 x 22.5 ]

u= 21 m/s

Thus, the minimum initial velocity that the ball must have for it to reach the top of the hill is 21 m/s.

Learn more about mechanical energy.

https://brainly.com/question/13552918

#SPJ1

27. The energy , in electronvolts, of an emitted photon when an electron transition from n=3 to n = 2 is  -1.89 eV.

28. The energy of this emitted photon in joules is -3.0278 x 10⁻¹⁹ Joules.

29. The frequency of the emitted photon is 4.572 x 10¹⁴ Hz.

30. The color of light associated with this photon is Red.

It is the number of oscillations per second of the sinusoidal wave.

Given is the Great Nebula in the constellation Orion consists primarily of excited hydrogen gas.

The electrons in the atoms of excited hydrogen have been raised to higher energy levels. When these atoms release energy, a frequent electron transition is from the excited n = 3 energy level to the n = 2 energy level, which gives the nebula one of its characteristic colors.

27. The energy of transition between n = 3 to n = 2 is

E = R h e (1/n₁² - 1/n₂²)    

where R = Rydberg constant and h = Planck's constant.

Substitute the values, we get

E = 1.0974 x 10⁻⁷ x 6.626 x 10⁻³⁴ x 1.6 x 10⁻¹⁹ (1/3² - 1 /2²)

E = -1.89 eV

28. Energy in joules can be obtained by multiplying  1.6 x 10⁻¹⁹ . So we have

E =  -1.89 eV x   1.6 x 10⁻¹⁹ J/eV

E =  -3.0278 x 10⁻¹⁹ Joules

29. Wavelength associated with the photon emitted is

1/λ = R (1/n₂² - 1/n₁² )

Substitute the values, we get

1/ λ  = 1.524 x 10⁶ /m

The frequency is related to the wavelength as

f = c/λ   where c = speed of light

f = 3 x 10⁸ x  1.524 x 10⁶

f = 4.572 x 10¹⁴ Hz

30. The color of light associated with the photon of calculated frequency is Red.

Learn more about frequency.

https://brainly.com/question/13758580

#SPJ1