Answer:
Neutral
Explanation:
NaCl aqueous solution is formed by NaOH and HCl.
NaOH is a base and HCl is an acid, so they go through neutralization process forming a neutral salt and water.
Question 2
2C4H10 + 1302 -> 8CO2 + 10H₂O
If 2.46 g H₂O are produced by a reaction, how many moles of C4H10 were used?
Answer:
2 mole of C4H10 were used in this reaction.
determine the number of gram of gas produced when 4.66 mole of water produced from the complete combustion of butane
.we can read the chemical preparation of the reaction as: "4 g of hydrogen react with 32 g of oxygen to give 36 g of water". :)
3) The following reaction produces chlorine molecules:
Energy + HCl (g) + CINO3 (8) Cl₂ (8) + HNO3 (8)
a) Describe 4 ways you could increase the concentration of chlorine molecules.
b) How would cooling shift the equilibrium of this reaction?
The 4 ways to increase the concentration of chlorine molecules is listed below and the reaction will go into reverse if cooled.
What is Le Châtelier’s principle ?
Le Châtelier's principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium shifts to counteract the change to reestablish an equilibrium.
Energy + HCl (g) + ClNO₃ ⇄ Cl₂ + HNO₃
a. So in this reaction when at equilibrium , To increase the concentration of Chlorine molecules
1. An increase in Temperature will favour the formation of Chlorine molecules.
2. Decrease in concentration of Chlorine , or partial removal of Chlorine will result the equation to go in forward direction.
3.An Increase in the concentration of HCl will favour formation of Chlorine molecules.
4.An Increase in the concentration of CINO₃ will also favour formation of Chlorine molecules.
b. The cooling would shift the reaction into backward direction as it is an endothermic reaction in forward state.
To know about reaction Le Châtelier’s principle
https://brainly.com/question/12099569
#SPJ1
An atom of an element is shown by the model.
How is the model useful
Answer:
I believe it is useful as it shows how electrons are distributed in the shells (energy levels) of an iron atom. An atom is the smallest particle of an element that can take part in a chemical reaction. It contains the nucleus and the shells (energy levels). the nucleus contains protons and neutrons while the shells contain electrons.
Explanation:
the density of 190mg of a liquid is 0.0076g/cm calculate the volume in ml
[tex]\\ \rm\Rrightarrow Density=\dfrac{Mass}{Volume}[/tex]
[tex]\\ \rm\Rrightarrow Volume=\dfrac{Mass}{Density}[/tex]
[tex]\\ \rm\Rrightarrow Volume=\dfrac{0.19}{0.0076}[/tex]
[tex]\\ \rm\Rrightarrow Volume=25cm³[/tex]
[tex]\\ \rm\Rrightarrow Volume=25mL[/tex]
Convert 26.02 x 1023 molecules of C2H8 to grams. Round your answer to the hundredths place.
No of molecules=26.02×10²³molecules
No of moles
26.02×10²³/6.023×10²³4.3molMolar mass
C2H82(12)+8(1)24+832g/molMass
Moles×Molar mass32(4.3)137.6g[tex]\\ \tt{:}\longrightarrow No\:of\:moles=\dfrac{Molecules}{Avagadro\:no}[/tex]
[tex]\\ \tt{:}\longrightarrow No\:of\:moles=\dfrac{26.02\times 10^{23}}{6.023\times 10^{23}}[/tex]
[tex]\\ \tt{:}\longrightarrow No\:of\:moles=4.32mol[/tex]
Molar mass of Ethane=32g/molWe need the mass
[tex]\\ \tt{:}\longrightarrow No\:of\:moles\times molar\:mass[/tex]
[tex]\\ \tt{:}\longrightarrow 32(4.32)[/tex]
[tex]\\ \tt{:}\longrightarrow 138.24g[/tex]
HCl + Fe + ____ + H²
Simple Way.
Hydrochloric acid + iron --> ______ + hydrogen gas.
• Answer this question, only if you know.
• Misuse of points will cost a report.
Answer:
This is a correct answer. 2HCL + Fe = FeCl2 + H2
What volume of 12M HCI is needed to prepare 250
of 0.20M HCI?
Answer: 4.2
Explanation:
[tex]M_{A}V_{A}=M_{B}V_{B}\\(12)V_{A}=(250)(0.20)\\V_{A}=\frac{(250)(0.20)}{12}=\boxed{4.2}[/tex]
Which two nuclides are isotopes of the same element
Answer:
1940K and 1939K Isotopes are two forms of the same element that have different numbers of neutrons in the nucleus. This means same symbol, and same atomic number (subscript), but different mass number (superscript).
Consider the following reversible reaction:
2 CO(g) + O₂(g) 2CO₂(g). Describe a way to increase the CO concentration at equilibrium. Explain your reasoning.
The given equilibrium reaction indicates the reaction between carbon monoxide and the oxygen and forms carbon dioxide. In this reaction, by increasing the concentration of the carbon monoxide, the equilibrium shifts towards the right. Since, the reactant concentration increases, the equilibrium stress decreases the concentration of the reactants and therefore, the equilibrium shift towards the right side of the equation.
reaction indicates that carbon monoxide reacts with oxygen and forms carbon dioxide gas.
By increasing the concentration of carbon monoxide image, the equilibrium in the reaction shifts towards the right.
The effect of change of pressure, concentration and temperature on the state of equilibrium can be predicted with the help of a principle known as Le Chatelier's principle. Here by increasing the concentration of CO₂, the amount of CO formation can increase.
What is Le Chatelier's principle?If a system in equilibrium is subjected to a change in concentration, pressure or temperature, the equilibrium shifts in the direction that tends to reduce or to counteract the effect of change. When the concentration of any substance in equilibrium is increased, the equilibrium shifts in the direction which decreases the concentration of that substance.
On other hand, increasing the concentration of any of the products results in shifting the equilibrium in the backward reaction forming more products. So here increasing the amount of CO₂, shifts equilibrium in the backward direction and forms more amount of CO.
To know more about Le Chatelier's principle, visit;
https://brainly.com/question/31664161
#SPJ2
How many moles of a gas can be contained in a 1600-cm° flask at 25°C and 75 kPa?
Volume=1600cm³=1.6dm³=1.6L
Temperature=25°C=273+25=298K
Pressure=75000Pa
Now
Apply ideal gas equation
PV=nRTn=PV/RTn=75000(1.6)/8.314(298)n=48.43molThe number of moles needed is
n=48.43mol.
Calculations
Given the values of the volume and temperature, we would convert them to the required units.
Volume=1600cm³=1.6dm³=1.6L
Temperature=25°C=273+25=298K
Pressure=75000Pa
We would use the ideal gas equation
PV=nRT
n=PV/RT
n=75000(1.6)/8.314(298)
n=48.43mol
Which factors affect heat transfer between a warm and a cool substance?
the time it took to heat the substance, the area of contact, and the specific heats of the substances
O the amount of time of contact, the area of contact, and the specific heats of the substances
O the time it took to heat the substance, the area of the substances, and the specific heats of the substa
O the amount of time of contact, the area of the substances, and the specific heats of the substances
The amount of time of contact, the area of contact, and the specific heats of the substances. Hence, option A is correct.
What are specific heats?The heat in calories is required to raise the temperature of one gram of a substance one degree Celsius.
Factors that affect the rate of heat flow include the conductivity of the material, the temperature difference across the material, the thickness of the material, and the area of the material.
Different materials have greater or lesser resistance to heat transfer, making them better insulators or better conductors.
The amount of time of contact, the area of contact, and the specific heats of the substances.
Hence, option A is correct.
Learn more about the specific heats here:
https://brainly.com/question/11297584
#SPJ1
Answer: The answer is C and D
B: If a substance undergoes a physical change, then it will retain most of its original properties because no new substance is formed.
C: If a substance undergoes a chemical change, then it will not retain its original properties because a new substance is formed.
Explanation: I took the test on edg
What reaction is 2KCLO3 2KCI + 3O2
Answer: Decomposition
Explanation:
A lead ball is added to a graduated cylinder containing 50.6 ml of water, causing the level of the water to increase to 93.0 mL. What is the volume in milliliters of the lead ball, Vieras? Viead =
42.4 ml is the volume in milliliters of the lead ball if a lead ball is added to a graduated cylinder containing 50.6 ml of water.
What is a graduated cylinder?A tall narrow container with a volume scale is used especially for measuring liquids.
The graduated cylinder contains water
mL is a volume unit.
Water volume = 50.6 ml
The lead ball caused an increase in volume from 50.6 ml to 93.0 mL.
The new volume is the lead ball volume plus the original water volume :
Final volume = Vlead ball+ Water original volume
[tex]93.0 mL= V_(lead ball) +50.6 ml[/tex]
[tex]V_(lead ball) = 93.0 mL - 50.6 ml[/tex]
[tex]V_(lead ball) = 42.4 ml[/tex]
Hence, 42.4 ml is the volume in milliliters of the lead ball.
Learn more about the graduated cylinder here:
https://brainly.com/question/13386106
#SPJ1
A gas cylinder contains 5.0 kg of propane. How many propane molecules are in the cylinder? The Avogadro constant, L = 6.022 x 1023 mol^-1
A 6.8 × 10^22
B 7.2 x 10^22
C 6.8 × 10^25
D 7.2 x 10^25
[1 mark]
Answer:
Here's your answer.
M(C3H8) = 44 g/mol
n(C3H8) = 5000 (g)/44 (g/mol) = 113,6 mol
[tex] N = n \times N_{a} = 113,6 \times 6,02 \times {10}^{23} \\ \\ = 684,1 \times 10 ^{23} \sf{molecules} [/tex]
Hope it helps you from my sideCalculate 5.1234 + 0.033÷ 1.650 and report to the correct number of significant figures.
5.1434 contains 5 significant figures and 4 decimals.
What is a significant figure?All zeros that occur between any two non-zero digits are significant. For example, 108.0097 contains seven significant digits.
Calculation:
5.1234 + 0.033÷ 1.650 = 5.1434
5.1434 contains 5 significant figures and 4 decimals. 5.1434 rounded to 4 sig figs is 5.143, to 3 sig figs is 5.14, and to 2 sig figs is 5.1.
Learn more about the significant figure here:
https://brainly.com/question/14359464?
#SPJ1
0.58 mol of Mg contains how many atoms? please show work
The number of atoms present in 0.58 mole of magnesium, Mg is 3.49×10²³ atoms
Avogadro's hypothesis1 mole of Mg = 6.02×10²³ atoms
How to determine the atoms in 0.58 mole of Mg1 mole of Mg = 6.02×10²³ atoms
Therefore,
0.58 mole of Mg = 0.58 × 6.02×10²³
0.58 mole of Mg = 3.49×10²³ atoms
Thus, 3.49×10²³ atoms are present in 0.58 mole of Mg
Learn more about Avogadro's number:
https://brainly.com/question/26141731
#SPJ1
Part E
Tsunami evacuation plans often consider the elevation of the community and its distance from the shoreline when
deciding which towns to evacuate. How could this data help in building new homes and communities along coastal areas
that are prone to tsunamis?
Answer:
make the house elevated
Name one similarity and one difference between visible light and sound.
Answer:
Light and sound both are waves, but sound requires a material medium to travel, and hence cannot travel in empty space while light can travel through vacuum but not through opaque materials. Both undergo refraction, diffraction and interference.
Explanation:
URGENT!!! Based on the following reaction, how much water is produced when oxygen react with 1 mole of C₂H8?
C₂H8 (g) + 40₂ (g) →2CO2 (g) + 4H₂O(g)
Answer:
4 moles
Explanation:
For every mole of deuteriomethane consumed, 4 moles of water are produced.
So, the answer is 4 moles
Why we use cotton cloth to mop the floor?
Answer:
because cotton have a good absorbing quality and can absorb water more which is used to mop the floor
Explanation:
Monosaccharides and disaccharides are what kind of molecules?
Answer:
They are small molecules
Explanation: Hope this helps
Answer: C) Carbohydrates
Explanation:
A) Lipids
B) Nucleic acids
C) Carbohydrates
D) Proteins
apex
Which of these is a benefit of including comments in your code
makes the app run faster
O helps other programmers understand your code
O improves the user interface
O makes your app more user friendly
A benefit of including comments in your code is that it helps other programmers understand your code.
What is a Code?These are numbers and letters which are used to identify a particular thing at a point in time.
Comments can be put in a code so as to enable others know and understand real intentions about it etc.
Read more about Code here https://brainly.com/question/2217700
#SPJ1
Answer: O helps other programmers understand your code
Explanation: got it right on edgen
Atoms are spherical in shape. Therefore, the Pt atoms in the cube cannot fill all the available space. If only 74.0 percent of the space inside the cube is taken up by Pt atoms, calculate the radius in picometers of a Pt atom. The mass of a single Pt atom is 3.240 × 10−22 g. [The volume of a sphere of radius r is (4/3) πr3. The volume of a cube is l3, where l is the length of a side. Avogadro's number is 6.022 × 1023.]
Answer:
Answer:
A)6.6×10^22atoms of Pt in the cube
B)1.4×10^-8m
Explanation:
(a) Calculate the number of Pt atoms in the cube.
an edge length of platinum (Pt) = 1.0 cm.
Then Volume= 1.0 cm×1.0 cm×1.0 cm=1cm^3
Then we have volume of the cube as 1cm^3
Given:
The density Pt = 21.45 g/cm3
the mass of a single Pt atom =3.240 x 10^-22 g
Then with 1atom of the platinum element, we can calculate the number of Pt atoms in the cube as
Density of pt/mass of a single Pt atom
=(21.45 /=3.240 x 10^-22)
=6.6×10^22atoms of Pt in the cube
B)Volume of cube V=4/3πr^3
V= 4/3 ×π×r^3
V= 4.19067r^3
r^3= V/4.19067
But volume is not total volume but just 74% of it, then With 74% of the space inside the cube is taken up by Pt atoms, then we need to find 74% of volume of the cube which is 1cm^3
74/100 ×1= 0.74cm^3
Then our new volume V is 0.74cm^3
r^3=0.74/4.19067×6.620 x 10^22
r^3=2.6674×10^-24
r= 3√2.6674×10^-24
r=1.4×10^-8m
does hot ice have to be cold or hot?
Answer:
hot
Explanation:
You'll need to boil the solution, though, to reduce the amount of water so that it is concentrated enough to form crystals. Cook your solution over low to medium heat for about an hour. You want to reduce it down to 1 cup or less.
FLAG A nurse is preparing to administer morphine 0.05 mg/kg intermittent IV bolus to a newborn who weighs 3 kg. Available is morphine 0.5 mg/mL injection. How many mL should the nurse administer? (Round the answer to the nearest tenth. Use a leading zero if it applies. Do not use a trailing zero.)
The quantity of morphine, the nurse should administer is 0.3 ml.
What is morphine?Morphine is a drug which comes under the pain relieving drugs.
The quantity of morphine is 0.05 mg/kg
The weight of the baby is 3 kg.
Available morphine is 0.5 mg/mL.
0.05 x 3 = 0.15 mg
then, 0.15 mg / 0.5 = 0.3
Thus, the quantity of morphine, the nurse should administer is 0.3 ml.
Learn more about morphine
https://brainly.com/question/10665765
#SPJ1
ASAP 100 POINTS Which molecules carries instructions for inherited traits
A.DNA
B CARbohydrate
C.Protein
D.Lipid
Answer:
A.DNA
Explanation:
Ahaa Its gona be right
Answer:
D.N.A.
Explanation:
Hi student! Let me help you out on this question.
D.N.A. is the molecule which carries instructions for inherited traits.
[tex]\therefore,Option\quad A \quad is \quad correct[/tex]
Hope that this helped! have a good day ahead.
You have now identified whether crabs are able to see plankton they eat near the ocean floor. Based on your answer, explain how this information can be used to help the Australian Institute of Marine Biology further to understand the environment of the ocean floor (what other organisms live at the bottom? How are these able to see their food/ attract food to survive?
They are able to find out more organisms which are present at the bottom of the sea due to their accomplishment.
How this information can be used to help to understand the environment of the ocean floor?This information can be used to help the Australian Institute of Marine Biology further to understand the environment of the ocean floor because they are able to see the seas floor and can find out other creatures as well.
So we can conclude that they are able to find out more organisms which are present at the bottom of the sea due to their accomplishment.
Learn more about crabs here: https://brainly.com/question/1120881
#SPJ1
Could really use a few pointers on this question!
From the calculations, we can see that the theoretical yiled of NO2 is 100L of NO2
What is the theoretical yield?The theoretical yield is that calculated from the stoichiometry of the reaction.
We can see that 1 mole of O2 produced 2 moles of NO2. Thus;
2.23 moles of O2 will produce 4.46 moles of NO2
Since 1 mole of NO2 occupies 22.4 L
4.46 moles of NO2 occupies 100L of NO2
Learn more about theoretical yield:https://brainly.com/question/14966377
#SPJ1
How many grams do 6.534e+24 molecules of phosphoric acid weigh?
Answer:
1,063 grams H₃PO₄
Explanation:
To find the mass of phosphoric acid (H₃PO₄), you should (1) convert molecules to moles (via Avogadro's number) and then (2) convert moles to grams (via molar mass from periodic table).
Molar Mass (H₃PO₄): 3(1.008 g/mol) + 30.974 g/mol + 4(15.998 g/mol)
Molar Mas (H₃PO₄): 97.99 g/mol
6.534 x 10²⁴ molecules H₃PO₄ 1 mole 97.99 g
--------------------------------------------- x ------------------------------------- x --------------
6.022 x 10²³ molecules 1 mole
= 1,063 grams H₃PO₄