Answer:
air
Explanation:
water is a liquid and can be refracted.
glass is a solid which can also be refracted.
however,
air you can't see just see mainly.
air is the answer.
hope this helps :)
When silver nitrate and beryllium chloride react, silver chloride and beryllium nitrate form. What are the coefficients in this equation? (Note: Be sure to keep the reactants and products in the same order that they appear in the question.)
A. 2,1,1,2
B. 1,2,2,1
C. 1,2,1,2
D. 2,1,2,1
Answer:
D. 2,1,2,1
Explanation:
The equation of the reaction is; 2AgNO3 + BeCl2 + ---------》2AgCl + Be(NO3)2
The rule applied in balancing chemical reaction equation is that the number of atoms of each element on the reactants side must be the same as the number of atoms of the same element on the products sides.
If this rule is properly applied to the reaction between silver nitrate and beryllium chloride to form silver chloride and beryllium nitrate , the coefficients in the equation are; 2,1,2,1
Hello guys sana ok lng kau
sssssssssssss
Explanation:
Answer:
hello how are you
have a great day
Which of the following is an example
of a measure of the
mass of an object?
A. 65 centimeters
B. 65 grams
C. 65 light-years
D. 65 feet
Answer:
Grams
Explanation:
Because that is the definition
Answer:
65 grams
Explanation:
A spacecraft is moving past the earth at a constant speed of 0.60 times the speed of light. The astronaut measures the time interval between ticks of the spacecraft clock to be 3.2 s. What is the time interval (in seconds) that an earth observer measures
Answer:
the time interval that an earth observer measures is 4 seconds
Explanation:
Given the data in the question;
speed of the spacecraft as it moves past the is 0.6 times the speed of light
we know that speed of light c = 3 × 10⁸ m/s
so speed of spacecraft v = 0.6 × c = 0.6c
time interval between ticks of the spacecraft clock Δt₀ = 3.2 seconds
Now, from time dilation;
t = Δt₀ / √( 1 - ( v² / c² ) )
t = Δt₀ / √( 1 - ( v/c )² )
we substitute
t = 3.2 / √( 1 - ( 0.6c / c )² )
t = 3.2 / √( 1 - ( 0.6 )² )
t = 3.2 / √( 1 - 0.36 )
t = 3.2 / √0.64
t = 3.2 / 0.8
t = 4 seconds
Therefore, the time interval that an earth observer measures is 4 seconds
Which term refers to how often a person works out?
Answer: Frequency
Explanation: Frequency is term which best describes how often a person exercises.
Answer:
frequency
Explanation:
I took the. test
13. For an object to appear transparent, what interaction must occur between light waves and the object they hit?
A. They are refracted.
C. They are diffracted
B. They are absorbed.
D. They are transmitted
Answer:
The answer is B
Explanation:
The absorption happens when photons from light hit atoms and molecules, and they vibrate because of that specific interaction. Then the heat ejects from the object in the format of thermal energy.
For an object to appear transparent, light waves must be transmitted through the object. Option D is correct.
What are light waves?Light waves are a type of electromagnetic radiation that can be perceived by the human eye.
Here,
For an object to appear transparent, light waves must be transmitted through the object. Therefore, the correct answer is D. When light waves are transmitted, they pass through the object without being absorbed or reflected, allowing us to see through the object. The degree to which light is transmitted through an object is related to the object's optical properties, such as its refractive index, which determines how much the light is bent as it passes through the object.
Learn more about light waves here:
https://brainly.com/question/23460034
#SPJ6
wegut.
c) A body weighs 1.2N on the moon and 120N on
the earth. Calculate the density of the moon,
taking acceleration of free fall as 10ms on the
earth surface and gravitational constant as
6.67 x 10Nm’kg. The radius of the moon is
2740 km.
We/Wm = ge/gm = 120N/1.2N
or
gm = ge/100 = 0.1 m/s^2
density = mass/volume = 3M/(4pir^3)
Re-arranging this equation, we get
M/r^2 = (4/3)×pi×(density)×r
From Newton's universal law of gravitation, the acceleration due to gravity on the moon gm is
gm = G(M/r^2) = G×(4/3)×pi×(density)×r
Solving for density, we get the expression
density = 3gm/(4×pi×G×r)
= 3(0.1)/(4×3.14×6.67×10^-11×2.74×10^6)
= 130.6 kg/m^3
¿Cuál es la frecuencia de rotación en la tierra?
Answer:
frequency is approximately 11.5 µHz, or more exactly, 11.5740740e-6 Hz
Explanation:
A record is spinning on a turntable. A record is a uniform disk of mass 1.00 kg and a radius of 0.13 m that spins around an axis through its center. The record is initially spinning at 10 rad/s. Then the motor is turned off and the record slows to a stop with constant angular acceleration. As the record is slowing down it spins through 6.37 revolutions. What is the magnitude of the net torque acting on the record as it slows down
Answer:
T = 0.01 Nm
Explanation:
First, we will calculate the angular acceleration of the disk:
[tex]2\theta\alpha = \omega_f^2-\omega_i^2[/tex]
where,
θ = angular displacement = (6.37 rev)(2π rad/1 rev) = 40.02 rad/s
α = angular acceleration = ?
ωi = initial angular speed = 10 rad/s
ωf = final angular speed = 0 rad/s
Therefore,
[tex](2)(40.02\ rad/s)\alpha = (0\ rad/s)^2-(10\ rad/s)^2[/tex]
α = -1.25 rad/s²
negative sign shows deceleration
α = 1.25 rad/s²
Now, we will calculate the moment of inertia of disk:
[tex]I = \frac{1}{2}mr^2[/tex]
where,
I = Moment of Inertia = ?
m = mass of disk = 1 kg
r = radius of disk = 0.13 m
Therefore,
[tex]I = \frac{1}{2} (1\ kg)(0.13\ m)^2[/tex]
I = 0.00845 kg.m²
Now, the torque can be given as:
T = Iα
T = (0.00845 kg.m²)(1.25 rad/s²)
T = 0.01 Nm
What is the light speed formula?
If ' c ' is the speed of light, then the formula for it is . . .
c = 299,792,458 meters per second
The velocity of a particle is given by v=25t2 -80t-200, where velocity is meter per second and time is seconds. Determine the velocity for the first six seconds when acceleration is zero.
Answer:
v = 220 m / s
Explanation:
This is a kinematics exercise, the expression for velocity is
v = 25 t² - 80 t - 200
asks the velocity for time t = 6 s.
let's calculate
v = 25 6² - 80 6 - 200
v = 220 m / s
The velocity for the first six seconds when acceleration is zero is -44 m/s.
What is velocity?
The velocity of an object is the rate of change displacement with time.
The velocity of the object for the first six seconds when the acceleration is zero is calculated as follows;
[tex]a = \frac{dv}{dt} \\\\a = 50t - 80\\\\0 = 50t - 80\\\\50t = 80\\\\t = 1.6 \ s[/tex]
Velocity when time = 1.6 s
[tex]v(1.6) = 25(1.6)^2 - 80(1.6) - 200\\\\v(1.6) = -264 \ m/s[/tex]
The velocity for the first six seconds when acceleration is zero.
[tex]v = v_{a =0} + v_6\\\\v = - 264 \ + 25(6)^2 - 80(6) - 200\\\\v = -44 \ m/s[/tex]
Learn more about velocity here: https://brainly.com/question/6504879
If 84 J of work are exerted to pull a wagon, how much force does it take to pull the wagon 7.0 m? Round your answer to the nearest whole number.
Answer: It takes 12 N of force to pull the wagon.
Explanation:
A 16.2-g bullet with an initial speed of 850 m/s embeds itself in a 40.0-kg block, which is attached to a horizontal spring with a force constant of 1000 N/m. What is the maximum compression of the spring
The maximum compression in the spring is 0.06883 meters.
Given to us,
mass of bullet, [tex]m= 16.2\ grams[/tex]
velocity of bullet, [tex]v= 850\ meter/second[/tex]
mass of the block, [tex]m_2= 40\ kilograms[/tex]
velocity of block, [tex]v_2= 0\ meter/second[/tex]
spring constant, [tex]k = 1000\ Newton/meter[/tex]
Combined mass after collision,
[tex]\begin{aligned}M&= m_1+m_2\\&= 40.0162\ Kilograms\end{aligned}[/tex]
Using the momentum conservation equation, to find out final velocity of the system(bullet and block combined)
[tex]m_1v_1+m_2v_2= MV\\[/tex]
[tex]0.0162\times 850+40\times 0 = 40.0162\times V\\V= 0.3441 meter/sec[/tex]
Now using the Conservation of Energy (Kinetic energy of the system will be equal to potential energy in the spring), to find out the displacement of the spring [tex](x)[/tex]
[tex]\frac{1}{2}kx^2 = \frac{1}{2}MV^2\\\\\frac{1}{2}\times 1000\times x^2= \frac{1}{2} \times40.0162\times0.3441^2\\\\x^2= 0.004738\\\\x= 0.06883\ meters[/tex]
Hence, the maximum compression in the spring is 0.06883 meters.
To know more visit:
https://brainly.com/question/2001019
what type of signal is utilized by the GP's satellite ?
Answer:
Hi how are you doing today Jasmine
Answer:
The answer is B
Explanation:
I did the USA test prep
what's the temperature 32°F in degrees Celsius
Answer:
0 degrees Celsius
Explanation:
Drag the tiles to the correct boxes. Not all tiles will be used.
Match the molecular shapes to the correct Lewis structures.
trigonal pyramidal
trigonal planar
bent
tetrahedral
linear
Answer
1) AlH3= trigonal planar
2) CH2F2= tetrahedral
3) PH3= trigonal pyramidal
4) O3= bent
Explanation:
I took the test
NO LINKS: Which of the following best demonstrates Newton's Third Law?
Gravity is a force pulling down on you.
The ahrder you hit a volleyball the faster it will get over the net
Air resistance slows down a parachutist
Your foot pushing on the floor and the floor pushing back
The best demonstration that applies to Newton's Third Law of motion would be D) When you walk your foot pushes down on the ground while the ground pushes back on your foot.
------------------
Newton's Third Law states that for every action, there is an equal and opposite reaction. This is actually explains that forces come in pairs and forces are an interaction between two objects. As per the correct option given in the question explains Newton’s Third Law.
------------------
When you walk your foot (say object A) pushes down on the ground while the ground (say object Q) pushes back on your foot with the same force but in the opposite direction.
What are
the main differences between cell
walls and cell membranes?
Answer:
Cell membrane helps to enclose the cell organelles and cytosol inside a cell. A cell wall is a ridgid, protective layer and it covers the cell membrane
Explanation:
Polarizing windows, filters, etc. are often used to reduce the amount of light that enters the lens of a camera or into a room or a car. A library atrium has an overhead skylight that lets in too much light during the day which heats up the interior of the library far too much. The building engineer installs new double paned polarizing sky lights to reduce the intensity. If sunlight, which is unpolarized, has an average intensity of 1366 W/m2 what angle should the polarizing axis of the second pane of the window make with the polarizing axis of the first pane of the window in order to reduce the intensity of the sunlight to 33% of the original value
Answer:
θ = 35.7º
Explanation:
For this exercise we must use the law of Malus
I = I₀ cos² θ
where the angle is between the two polarizers.
When the unpolarized light from the sun reaches the first polarizer, only the light polarized in the direction manages to be transmitted, which is why
I₁ = I₀ /2
this light reaches the second polarizer
I₂ = I₁ cos² θ
I₂ = I₀/2 cos² θ
cos² θ = 2 I₂ / Io
indicate that the transmitted light is 33% = 0.33 I₀
cos² θ = 2 0.33
cos θ = √0.66
θ = cos⁻¹ 0.8124
θ = 35.7º
At what speed is the kinetic energy of a particle twice its Newtonian value?
PLEASE HELP WITH THIS ONE QUESTION
Which of the following must be true for a current to be induced in a wire passing through a magnetic field?
A) the magnetic field and the direction of motion must be perpendicular
B) the magnetic field and direction of motion must be parallel
Answer:
A) the magnetic field and the direction of motion must be perpendicular
For a current to be induced in a wire passing through a magnetic field, the magnetic field and the direction of motion must be perpendicular. The correct option is A.
What is magnetic field?The magnetic field is the region of space where another object experiences magnetic force and the current is induced in it.
According to the Fleming's right hand rule, the direction of motion, magnetic force and magnetic field are mutually perpendicular.
Thus, the correct option is A.
Learn more about magnetic field.
https://brainly.com/question/14848188
#SPJ2
Can anybody help meh :(
A total charge of 9.0 mC passes through a cross-sectional area of a nichrome wire in 3.6s. The number of electrons passing through the cross-sectional area in 10s is
Answer:
[tex]n=1.56\times 10^{17}[/tex] electrons
Explanation:
Given that,
Total charge = 9 mC = 0.009 C
0.009 C of charge passes through a wire in 3.6 s.
Let q' is the charge that passes through it in 10 s.
So,
[tex]\dfrac{0.009 }{3.6}=\dfrac{q'}{10}\\\\q'=\dfrac{0.009 \times 10}{3.6}\\\\q'=0.025\ C[/tex]
We know that,
q = ne
Where
n is the number of electrons
So,
[tex]n=\dfrac{q}{e}\\\\n=\dfrac{0.025}{1.6\times 10^{-19}}\\\\n=1.56\times 10^{17}[/tex]
So, [tex]1.56\times 10^{17}[/tex]electrons must pass through the cross-sectional area.
You are asked to design a spring that will give a 1070 kg satellite a speed of 3.75 m/s relative to an orbiting space shuttle. Your spring is to give the satellite a maximum acceleration of 5.00g. The spring's mass, the recoil kinetic energy of the shuttle, and changes in gravitational potential energy will all be negligible.
(a) What must the force constant of the spring be?
(b) What distance must the spring be compressed?
Answer:
[tex]380697.33\ \text{N/m}[/tex]
[tex]0.138\ \text{m}[/tex]
Explanation:
m = Mass rocket = 1070 kg
v = Velocity of rocket = 3.75 m/s
a = Acceleration of rocket = 5g
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
The energy balance of the system is given by
[tex]\dfrac{1}{2}kx^2=\dfrac{1}{2}mv^2\\\Rightarrow kx=\dfrac{mv^2}{x}\\\Rightarrow kx=\dfrac{1070\times 3.75^2}{x}\\\Rightarrow kx=\dfrac{7250}{x}[/tex]
The force balance of the system is given by
[tex]ma=kx\\\Rightarrow m5g=\dfrac{7250}{x}\\\Rightarrow x=\dfrac{7250}{1070\times 5\times 9.81}\\\Rightarrow x=0.138\ \text{m}[/tex]
The distance the spring must be compressed is [tex]0.138\ \text{m}[/tex]
[tex]k=\dfrac{7250}{x^2}\\\Rightarrow k=\dfrac{7250}{0.138^2}\\\Rightarrow k=380697.33\ \text{N/m}[/tex]
The force constant of the spring is [tex]380697.33\ \text{N/m}[/tex].
A plane is heading south with a velocity of 150 kilometers/hour. It experiences a tallwind with a velocity of 20 kilometers/hour. Find the resultant
velocity of the plane.
A.120 kilometers/hour to the south
B.148 kilometers/hour to the north
C.170 kilometers/hour to the south
D.130 kilometers/hour to the north
E.150 kilometers/hour to the south
Answer: 170km/hr to the South
Explanation:
The resultant velocity of the plane ilwill be gotten by adding the value of the velocities of the plane with the tallwind. It should be noted that the direction of the wind is.takwn into consideration.
Therefore, the resultant velocity of the plane will be:
= 20km/hr + 150km/hr
= 170km/hr to the South
Answer:
Resultant Velocity = 20 km/h + 150 km/h = 170 km/h
Explanation:
Two creatures sit on a horizontal frictional rotating platform. The platform rotates at a constant speed. The creatures do not slip off as it rotates.
ASSUME:
Red has a mass of 5 kg
Red is 1.5 m from the center
Red has a speed of 9 m/s
Blue has a mass of 25 kg
Blue has a speed of 1.8 m/s
The force of friction on Red is EQUAL to the force of friction on Blue
DETERMINE:
How far from the center is Blue
Answer:
M v^2 / R = centripetal force
For Red: M v^2 / R = 5 * 9^2 / 1.5 = 270
For Blue M v^2 / R = 270 = 25 * 1.8^2 / Rb
So Rb = 25 * 1.8^2 / 270 = .3 m
An atom has two more electrons than protons. What is the charge of the atom?
Answer:
If it has more electrons than protons it has a net negative charge and is known as an anion.
11. A candle is placed in front of a plane mirror. The calculated value of m,
the lateral magnification, is positive. What does the positive sign indicate
about the image?
O The image is enlarged.
The image is on the same side of the mirror as the object.
The image distance is greater than the object distance.
The image is upright.
Answer: If the magnification is positive, the image is upright compared to the object; if m is negative, the image is inverted compared to the object.
(I think, I was also stuck on this question for a bit)
The positive sign indicate about the image that
b) The image is on the same side of the mirror as the object.
d) The image is upright.
What is magnification ?
Magnification is a quantification of comparing the size of the image with respect to the size of the object. It gives us information about the image in terms of how large or small is the image formed.
magnification = height of image / height of object
since , height of object is always positive as it is always kept upright hence , in order to make m positive , height of image need to be positive
also magnification = -(v/u )
v = image distance
u = object distance
u is always positive hence , in order to make m positive , v needs to be negative , which implies on the same side of the mirror as the object
correct option
b) The image is on the same side of the mirror as the object.
d) The image is upright.
learn more about magnification
https://brainly.com/question/3851549?referrer=searchResults
#SPJ2
Please please help me please please help please please
Answer:
Refraction
The rainbow is created because the index of refraction of water droplets changes as a function of wavelength. So, when the light enters the water droplet different colors will bend at different angles thus producing a dispersive effect known as a rainbow.
Answer:
D: Refraction
Explanation:
Refraction is the spitting of the electromagnetic spectrum, or the disembling of colours. For example, white is a mixture of all the colours.
The botanist from the nursery is planning to develop a large number of new spider plants with larger flowers. Identify the type of reproduction the botanist should use to develop the new spider plants and explain why this type of reproduction is preferable.
Answer:
Sexual reproduction.
Explanation:
Reproduction can be defined as a biological process which typically involves living organisms producing an offspring.
Basically, there are two (2) methods of reproduction and these are;
I. Asexual reproduction: it involves the cloning of a living organism to produce an offspring because there is only a single parent.
II. Sexual reproduction: it involves the combination of the genome (gamete) of a male and female living organism during fertilization.
In this scenario, the botanist from the nursery plans to develop a large number of new spider plants that has larger flowers. Thus, the type of reproduction the botanist should use to develop the new spider plants is sexual reproduction because it would help the parent plant reproduce offsprings with different traits such as spider plants with large flowers. Also, the botanist should use sexual reproduction rather than asexual reproduction because asexual reproduction will only make the parent plant reproduce that have the same type of traits as themselves.
a space probe with a mass of 4000 kg expels 3,500 of its mass at a velocity of 2000 m/s. what is the velocity of the remaining 500 kg of the probe
Answer:
4.16×103 m/s
Explanation: