Help help help help help

Answer:

      k = [tex]\frac{g \ m_1}{L}[/tex]

Explanation:

In this exercise the two cases presented are a simple harmonic motion, with angular velocity

spring - mass                                      w² = k / m₁

simple pendulum (string- mass m₂)  w² = g / L

angular velocity and period are related

              w = 2π/ T

since they indicate that the two periods are equal, the angular velocities are also equal, therefore we can equal the two equations

             [tex]\frac{k}{m1} = \frac{g}{L}[/tex]

             k = [tex]\frac{g \ m_1}{L}[/tex]

Answer:

-2.27

Explanation:

Got it right on Acellus

Answer:

-2.27

Explanation:

Acellus

Answer:

Current = 0.33 Amperes

Explanation:

Given the following data:

Resistance = 12 ohm

Voltage = 4 v

To find the current;

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

Voltage = current * resistance

Substituting into the formula, we have;

4 = current * 12

Current = 4/12

Current = 0.33 Amperes

Answer: you ever get the awnser?

Explanation:

Answer: 0.12 g

Explanation: I got it right on the quiz.

Answer:

When a polythene rod is rubbed with a duster, the friction causes electrons to gain energy. Electrons gain enough energy to leave the atom and 'rub off' onto the polythene rod. The polythene rod has gained electrons, giving it a negative charge.

Explanation:

Hope it helps

Answer:

Answer:

A

Explanation:

Answer:

Solid objects will deform when adequate loads are applied to them; if the material is elastic, the object will return to its initial shape and size after removal. This is in contrast to plasticity, in which the object fails to do so and instead remains in its deformed state.

Explanation:

Answer:

It is false

Explanation:

because when it like a rolling ball it can deform no matter what unlesss you throw it at the ground really hard then it breaks but a soft or sometimes metal yeah it can deform but not all things solid deform.

Answer:

The voltage across light bulb 1 and light bulb 2 is the the same i.e V

Explanation:

In a parallel circuit, the Voltage is same across all the components of the circuit and the current flowing through each component is added to get the total current across the circuit.

Let us say, the voltage across the circuit is V. The voltage across light bulb 1 and light bulb 2 is the the same i.e V

Explanation:

this is the ans hope it works

Answer:

Forces make things speed up (or accelerate). When a force pushes or pulls the object, the object will move in the direction of the force. The bigger the force, and the lighter the object, the greater the acceleration.

Explanation:

The action from a force can cause an object to move or speed up (accelerate), to slow down (decelerate), to stop, or to change direction. Since any change in velocity is considered acceleration, it can be said that a force on an object results in the acceleration of an object.

A simple mathematical relationship exists between the mass of an object (m), the net force on the object (f) and its acceleration (a). The acceleration of an object is directly proportional to the net force and indirectly proportional to the object’s mass (a = f/m).

Answer:

it depends on a person's own weight

Answer:

The gravity is roughly the same. The inverse square law applies to gravity and that means that being 60 miles above Earth is about the same as being on Earth. The thing is, they are going really fast in an orbit and thus falling around the Earth. The weightlessness comes from a sort of cancellation of gravity pulling them down and their going perpendicular to that force. The forces are cancelling and making them relatively “weightless”. It’s not really weightlessness but just an equilibrium reached between the two accelerations of gravity and their motion against the pull of the Earth.

Explanation:

Answer:Shape

I took the quiz

Answer:shape

Explanation:

I took the quiz

Answer:

b

Explanation:

Machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.

The term mechanical advantage is the ratio of the radius of wheel to the radius of the axle for a wheel and axle system.

The true statement about the two machines that were compared; 1 and 2 is that, machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.

Learn more about mechanical advantage:https://brainly.com/question/16617083

#SPJ2

Answer:

A battery is a device that stores chemical energy and converts it to electrical energy. The chemical reactions in a battery involve the flow of electrons from one material (electrode) to another, through an external circuit. The flow of electrons provides an electric current that can be used to do work.

Answer:

Due to wind and waves of water.

Explanation:

They wonder that the ball will float back to the beach because of the wind and the waves of the water. The wind blows towards the beach which moves the water in the form of waves towards the beach so if the ball lands in the water, it will floats on the surface of water and move towards the beach with the help of wind and waves of the sea. The ball floats on the water due to its lighter weight and lower density as compared to water.

Answer:

R = 0.2 Ω

Explanation:

Para aplicar el concepto de resistencia de un conductor electrico, consideramos la siguiente formula:

R = ρ . l / S

Donde l es la longitud del conductor

S la superficie

y ρ el coeficiente de resistividad

Primero necestiamos hacer ciertas conversiones:

ρ = 0.10 ×10⁻⁶ (Ω . m²/m)

S = 2 mm² → 2 ×10⁻⁶ m²

R = 0.10 ×10⁻⁶ (Ω . m²/m) . 4m / 2 ×10⁻⁶ m²

Dentro de la formula simplificamos las unidades, los metros de ρ con la longitud y ambos m². De esa forma la unidad de R queda en Ω (ohmios).

Resolvemos:

R = 0.10 ×10⁻⁶ Ω . 4 / 2 ×10⁻⁶

R = 0.2 Ω

Answer:

Explanation:

2) From F=ma

Force =15×40=600N or kgm/s2

3)From the same equation making acceleration the subject of the formula will give

a=f÷m

=24÷4=6m/s2

4)m=f÷a

=45÷15=3kg

Answer:

hope it is helpful to you ☺️☺️✌️

Answer:

W = 439998 J = 439.99 KJ

Explanation:

First, we will calculate the acceleration of the car by using the first equation of motion:

[tex]v_f = v_i + at\\\\a = \frac{v_f-v_i}{t}[/tex]

where,

a = acceleration = ?

vf = final speed = [tex]108(\frac{km}{h})(\frac{1000\ m}{1\ km})(\frac{1\ h}{3600\ s})[/tex] = 30 m/s

vi = initial speed = [tex]36(\frac{km}{h})(\frac{1000\ m}{1\ km})(\frac{1\ h}{3600\ s})[/tex] = 10 m/s

t = time = 30 s

Therefore,

[tex]a = \frac{30\ m/s - 10\ m/s}{30\ s}[/tex]

a = 0.67 m/s²

Now, we will calculate the force applied by the engine:

F = ma

where,

F = force = ?

m = mass = 1100 kg

Therefore,

F = (1100 kg)(0.67 m/s²)

F = 733.3 N

Now, we will calculate the distance covered by the car by using the second equation of motion:

[tex]s = v_it+\frac{1}{2}at^2\\\\s = (10\ m/s)(30\ s)+\frac{1}{2} (0.67\ m/s^2)(30\ s)^2[/tex]

s = 600 m

Now, the work done (W) by engine can be calculated as follows:

W = Fs

W = (733.3 N)(600 m)

W = 439998 J = 439.99 KJ

Answer: I believe that the answer is D.

Explanation:

Hope this helps and have a great day! :)

Answer:

D) all of the above

Explanation:

Answer:

            T = reading (cm) time base (s / cm)

            f = 1 / T

Explanation:

An oscilloscope is a piece of equipment that allows you to visualize and measure a wave that reaches you, in the case of having a sonometer this transforms the sound wave into an electrical signal to be introduced through one of the voltage channels of the equipment, on the screen we will see the oscillating alternating signal, if it is fixed we can make the reading, if it is moving the time base and the trigger must be adjusted to stop it.

In the oscilloscope we can read the period of the signal, this is the time it takes for the signal to repeat itself with this value, we can calculate the frequency with the formula, for the reading of the period the distance is measured on the labeled screen and multiplied by the time base

            T = reading (cm) time base (s / cm)

            f = 1 / T

Answer:

A light-year is the distance light travels in one year. How far is that? Multiply the number of seconds in one year by the number of miles or kilometers that light travels in one second, and there you have it: one light-year. It's about 5.88 trillion miles (9.5 trillion km).

Explanation:

Answer:

v_f = -7.5 m / s

Explanation:

Let's analyze this exercise a little, two forces that act on a body for different time intervals are indicated, each force creates an impulse and since this is a vector quantity we must add in the form of vectors. The net momentum is

we assume that the direction to the right is positive

             I = I₁ + I₂

             I = F₁ Δt₁ - F₂ Δt₂

             I = 3  1.5 - 4  3

             I = -7.5   N s

now let's use the relationship between momentum and momentum, suppose the object starts from rest (vo = 0)

             I = Δp

             I = m (v_f - v₀)

             v_f = I / m

              v_f = -7.5 / m

to finish the calculation we must assume a mass m = 1 kg

              v_f = -7.5 m / s

the negative sign in the body is moving to the left

Answer:

conductor

Does not easily transfer electricity

Answer:

option one

Explanation:

equilibrium is used to describe the point in which something meets in this case the temperature of an object

Answer:X-ray diffraction (XRD) is the technique most heavily relied on in soil mineralogical analysis. X-ray diffraction is a technique that provides detailed information about the atomic structure of crystalline substances. It is a powerful tool in the identification of minerals in rocks and soils.

Explanation:

XRD is used to identify the minerals composing clay-rich, hydrothermally altered rocks that occur on several Cascade volcanoes. Such rocks are believed to play an important role in the generation of large landslides and mudflows. XRD is used to analyze saline minerals, including borates.

Answer:

(i) Please find attached the required velocity time graphs plotted with MS Excel

(ii) The velocity of vehicle A at the 18th second = 20 m/s

The velocity of vehicle B at the 18th second = 0 m/s

(iii) The distance between the two vehicles at the moment in (ii) above is 60 meters

Explanation:

The given parameters of the motion of vehicles A and B are;

The acceleration of vehicles A and B = Uniform acceleration starting from rest

The maximum velocity attained by vehicle A = 30 m/s

The time it takes vehicle A to attain maximum velocity = 10 s

The maximum velocity attained by vehicle B = 30 m/s

The time it takes vehicle B to attain maximum velocity = The time it takes vehicle A to attain maximum velocity = 10 s

The time duration vehicle A maintains its maximum velocity = 6 s

The time duration vehicle B maintains its maximum velocity = 4 s

(i) From the question, we get the following table;

[tex]\begin{array}{ccc}Time &V_A&V_B\\0&0&0\\10&30&40\\14&30&40\\16&30&20\\18&20&0\\22&0&\end{array}[/tex]

From the above table the velocity time graphs of vehicles A and B is created with MS Excel and can included here

(ii) The velocity of vehicle A at the start = 0 m/s

After accelerating for 10 seconds, the velocity of vehicle A = The maximum velocity of vehicle A = 30 m/s

The maximum velocity is maintained for 6 seconds which gives;

At 10 s + 6 s = 16 s, the velocity of vehicle A = 30 m/s

The time it takes vehicle A to decelerate to rest = 6 s

The deceleration of vehicle A, [tex]a_A[/tex] = (30 m/s - 0 m/s)/(6 s) = 5 m/s²

Therefore, we get;

v = u - [tex]a_A[/tex]·t

At the 18th second, the deceleration time, t = 18 s - 16 s = 2 s

u = 30 m/s

∴ v₁₈ = 30 - 5 × 2 = 20

The velocity of vehicle A at the 18th second, [tex]V_{18A}[/tex] = 20 m/s

For vehicle B, we have;

At the 14th second, the velocity of vehicle B = 40 m/s

Vehicle B decelerates to rest in, t = 4 s

The deceleration of vehicle B, [tex]a_B[/tex] = (40 m/s - 0 m/s)/(4 s) = 10 m/s²

For vehicle B, at the 18th second, t = 18 s - 14 s = 4 s

∴ [tex]v_{18B}[/tex] = 40 m/s - 10 m/s² × 4 s = 0 m/s

The velocity of the vehicle B at 18th second, [tex]v_{18B}[/tex] = 0 m/s

(iii) The distance covered by vehicle A up to the 18th second is given by the area under the velocity-time graph as follows;

The area triangle A₁ = (1/2) × 10 × 30 = 150

Area of rectangle, A₂ = 6 × 30 = 180

Area of trapezoid, A₃ = (1/2) × (30 + 20) × 2 = 50

The distance covered in the 18th second by vehicle [tex]S_A[/tex] = A₁ + A₂ + A₃

∴ [tex]S_A[/tex] = 150 + 180 + 50 = 380

The distance covered in the 18th second by vehicle [tex]S_A[/tex] = 380 m

The distance covered by the vehicle B in the 18th second is given by the area under the velocity time graph of vehicle B as follows;

Area of trapezoid, A₅ = (1/2) × (18 + 4) × 40 = 440

The distance covered by the trapezoid, [tex]S_B[/tex] = 440 m

The distance of the two vehicles apart at the 18t second, [tex]S_{AB}[/tex] = [tex]S_B[/tex] - [tex]S_A[/tex]

∴ [tex]S_{AB}[/tex] = 440 m - 380 m = 60 m

The distance of the two vehicles from one another at the 18th second, [tex]S_{AB}[/tex] = 60 m.