Total internal reflection causes light to be completely reflected across the boundary between the two media but not transmitted.
What is total internal reflection?The term total internal reflection occurs when light is moving from a denser to a less dense medium such as from glass to air. This phenomenon occurs at the interface between the two media.
There are two conditions necessary for total internal reflection and they are;
1) Light must travel from a denser to a less dense medium
2) The angle of incidence in the denser medium must be greater than the critical angle.
Total internal reflection causes light to be completely reflected across the boundary between the two media but not transmitted.
Learn more about total internal reflection:https://brainly.com/question/13088998
#SPJ1
How does the government involve in a child or young person’s upbringing in your
country?
The government are involved in a child or young person’s upbringing in my country by providing the right amenities and ensure the justice system is fair.
What is Upbringing?This is defined as the way an individual treated at a young age by older adults such as parents.
Providing amenities will ensure the upbringing of the child is easier and a fair justice system will help to control crime.
Read more about Upbringing here https://brainly.com/question/12397063
#SPJ1
According to Ohm’s law, which is stated as I = V ÷ R, which two sentences are true?
If the current increases, then the resistance increases. Assume voltage is constant.
If the resistance decreases, then the current increases. Assume voltage is constant.
If the voltage increases, then the resistance decreases. Assume current is constant.
If the voltage increases, then the current increases. Assume resistance is constant.
If the voltage increases, then the current decreases. Assume resistance is constant.
Answer:
2nd and 4th statements.
Explanation
If voltage is constant ( k ) and I = V / R,
Then I is inversely proportional to R so if I increases R decreases and vice versa, according to that the second statement is correct not the first.
if current is constant, then v is directly proportional to R and vice versa..the 3rd statement is wrong
if resistance is constant v is directly proportional to I, then only the 4th is correct not the 5th
What is the time required for an object starting from rest.
The electromagnet in a motor must rotate consistantly in just one direction to transfor. ectrical energy into mechanical energy. What causes this rotation?
The rotation of the electric motor in one direction is because the commutator frequently reverses the direction of the current in the loop of wire.
What is an electromagnet?An electromagnet is a device which works on the principle of electromagnetism.
Electromagnetism is the force produced due to an interaction of the electric and magnetic fields.
An example of an electromagnet is the electric motor.
In an electromagnet, the rotation of the motor in one direction is because the commutator frequently reverses the direction of the current in the loop of wire.
Learn more about electric motor at: https://brainly.com/question/1049516
#SPJ1
Electromagnet in a motor must rotate consistently in just one direction because of the movement of permanent magnet.
What causes the rotation?
A Lorentz force is generated by the current and the magnetic flux of the permanent magnet in the same direction when the movement of the permanent magnet occur.
So we can conclude that Electromagnet in a motor must rotate consistently in just one direction because of the movement of permanent magnet.
Learn more about magnet here: https://brainly.com/question/14997726
#SPJ1
Why is it making me do this
Answer:
I don't know.
Explanation:
I have no idea what you are referring to.
To fully complete this project, you will submit the following: complete the data table with values that you determine from the video and calculated. find the average wave speed as asked for in question 3. find the mathematical speed of sound as asked for in question 4. show your calculation. answer to question 5 in complete sentences.
Since no data table was provided, the wave speed be calculated by taking the mean of speed values.
Also, the mathematically derived speed of sound is 343 m/s at 20 °C.
What is speed of sound in air?Sound is an example of a mechanical wave and require a material medium for it's transmission.
The speed of sound in air has been determined to be about 343 m/s at 20 °C.
The average wave speed can be calculated using the formula:
Average wave speed = (initial speed + final speed)/2The formula relating speed of a wave, frequency, and wavelength is given below:
Speed = wavelength × frequency.It is important to note that in this question, no data table or video was provided.
Therefore, the wave speed be calculated by taking the mean of speed values obtained in the experiment as shown in the video.
Also, the mathematically derived speed of sound is 343 m/s at 20 °C.
Learn more about speed of waves at: https://brainly.com/question/2847127
#SPJ2
please help me with this
Answer: you got it duDee
Explanation:
Pls help me l will make it brainlest
Answer:
0.04 °C⁻¹
Explanation:
First, we need to calculate linear expansivity, then after finding that value, we can move on to finding the area expansivity.
=============================================================
Finding Linear Expansivity :
⇒ α = Final length - Original length / (Original length × ΔT)
⇒ α = 9 - 4 / (4 × 70 - 20)
⇒ α = 5 / 5 × 50
⇒ α = 0.02
============================================================
Finding Area Expansivity :
⇒ Area Expansivity = 2 × Linear Expansivity
⇒ β = 2 × α
⇒ β = 2 × 0.02
⇒ β = 0.04 °C⁻¹
Calculate the value of the area expansion of a steel rod of lenght 4cm at 20°c after heating attains another length of 9cm at 70°c.
Area = 0.02
Area Expansity = [tex]0.0 {4}^{ - 1} [/tex]
Rearrange the equation = KE
-1
2
- my? to solve for v. Show your work.
Answer:
See below
Explanation:
KE = 1/2 m v^2 multiply both sides by 2
2 (KE) = mv^2 divide both sides by m
2(KE) / m = v^2 sqrt both sides
√ [(2KE)/m ] = v
Which is one factor that contributes to the formation of polar, temperate, and tropical zones?
the angle of the Sun’s rays
the direction of seasonal winds
the presence of prevailing winds
the movement of wind near a mountain
help im timed
Answer:
The angle of the Sun's rays:
At about June 21 the sun is directly overhead at about 23 deg north of the equator
On about Dec 21 the sun is directly overhead at about 23 deg south of the equator
It is this tilt 23 deg to the ecliptic (path of earth about sun) that causes the major temperature changes on earth
Which piece of furniture will have the most inertia and give the furniture movers the most difficulty in moving?
a 50kg couch
a 5kg dining chair
a 75kg dining table
an 10kg end table
Answer:75 kg
Explanation:
I took the test edge
4. if the experiment had been repeated with frequencies 10 times lower than those in table 5.2,
what effect would that have on the experiment? (1)
If the experiment had been repeated with frequencies 10 times lower than those in table 5.2, then Vc will increase 10 times to the values given in the table.
What is frequency?It is the number of oscillations per second of the sinusoidal wave.
Vc is the voltage across the capacitor and Xc is the capacitive reactance.
Xc = - 1/2πfC
where f is the frequency and C is the capacitance of the capacitor.
If the frequency is lowered, the potential difference will increase because frequency is inversely proportional to the voltage.
Thus, Vc will increase by lowering the frequency by 10 times.
Learn more about frequency.
https://brainly.com/question/13758580
#SPJ1
Write a 150-200 word response. your class requires you to use a program that you must download on your computer you have waited until day 5 of the week to download the program and you need it for an assignment that is due in 2 days now you are having issues with the program how do you approach solving this problem who would you contact first and why what are the resources available to support you when obstacles arise and why is effective communication important in linking you to these resources
A person would contact his fellow students and his friends inquiring whether they have encountered the same issue as it is with him.
What is program?The program is a system software which helps students to learn or accomplish any projects.
The class requires a student to use a program that you must download on his computer. He have waited until day 5 of the week to download the program and need it for an assignment that is due in 2 days now. He is having issues with the program.
He must contact his fellow friends and students whether they are facing the same error in starting the program. There are many resources to be used in place of that software. He can also use the internet to find out the troubleshooting methods. He can also contact the software developer and discuss the problems regarding software.
The effective communication can resolve the issues. If no communication is there, no problem is being solved. The person will never understand what other person is facing until and unless he doesn't speak.
Therefore, proper communication and complete details must be shared in order to solve any issue. Any critical problem can be solved even by just discussing.
Learn more about program.
https://brainly.com/question/11023419
#SPJ1
The water in this pot is in the process of changing from a liquid to a gas. Thermal energy is still being added to the water as it vaporizes, but its temperature and the motion of its particles are not increasing. What do you think is happening to the extra energy?
The extra energy allows the molecules to convert states of molecules.
What is heating?When the temperature is increased , the body or particle is said to be heating.
The water in this pot is in the process of changing from a liquid to a gas. Thermal energy is still being added to the water as it vaporizes, but its temperature and the motion of its particles are not increasing.
When the liquid is converted to gas, the temperature reaches the boiling point of water. After boiling, the heat added up will only make the particles to convert its phase and go away in then atmosphere.
Thus, extra energy added helps molecules of water to change its state from liquid to solid.
Learn more about heating.
https://brainly.com/question/1429452
#SPJ1
On Earth's surface at sea level, what is the weight of an object with a mass of 180 kg?
860 newtons
1764 newtons
400 newtons
200 pounds
Considering the definition of weight, on Earth's surface at sea level, the weight of an object with a mass of 180 kg is 1764 N.
What is weightMass is the amount of matter that a body contains and weight is the action exerted by the force of gravity on the body.
The mass of an object will always be the same, no matter where it is located. Instead, the weight of the object will vary according to the force of gravity acting on it.
The weight is calculated as the product of the mass of the object and the value of the gravitational acceleration or gravity:
Weight= mass× gravity
The value of the acceleration constant on Earth is 9.8 m/s². The weight is proportional to the mass of the object. The unit of weight is expressed in Newton (N).
Weight of the object in this caseIn this case, you know:
mass= 180 kggravity= 9.8 m/s²Replacing on the definition of weight:
Weight= 180 kg× 9.8 m/s²
Solving:
Weight= 1764 N
Finally, on Earth's surface at sea level, the weight of an object with a mass of 180 kg is 1764 N.
Learn more about weight:
https://brainly.com/question/17490356
#SPJ1
A airplane that is flying level needs to accelerate from a speed of 100 m/s to a speed of 260 m/s while it flies a distance of 2000 m. What must the acceleration of the plane be
The flag in front of Century High School is attached to a pully. The upward tension on the rope is 15 newtons and the downward tension on the rope is 18 newtons. What is the magnitude and direction of the net force?
3 newtons upward
3 newtons downward
From the statement in the question, the resultant force is 3N downward.
What is the resultant force?The term resultant force refers to a single force that will an effect tat is the same as that of the system of forces acting together.
Thus, if the upward force is 15 N and the downward force is 18 N, the resultant force will be; 18 N - 15 N = 3N downward.
Learn more about resultant force:https://brainly.com/question/16380983
#SPJ1
Which best explains how gravity contributes to the formation of layers in protoplanets?.
The following statement best describes how gravity helps protoplanets create layers in that gravity pulls materials and generates compaction, which produces heat and causes materials to melt, sink, and rise. Option A is correct.
What is gravity?Gravitation is a natural law by which all things with all matter are attracted towards one another. gravity causes weight to all matter and the gravity of the moon causes the ocean tides.
The force that draws massed bodies toward one another is known as gravity. Gravitatithus
According to the alternatives, gravity pulls things together and causes compaction, which generates heat and causes things to melt,
Thus, we may draw the conclusion that gravity draws materials and creates compaction, which generates heat and causes materials to melt, sink, and rise.
Hence option A is correct,
To learn more about gravity refer to the link;
https://brainly.com/question/1479537
#SPJ1
Answer:
its A
Explanation:
The diagram shows a simple circuit. Which change would cause the light-bulb to get brighter?
A) Increase the length of the wire between the switch and the battery.
B) Decrease the length of the wire between the switch and the battery.
C) Reverse the direction of the battery.
D) Swap the positions of the lightbulb and the switch.
The correct option is B. Decrease the length of the wire between the switch and the battery.
Resistivity of wire
The resistivity of a wire is the measure of the opposition to the flow of current offered by the wire.
ρ = RA/L
RA = ρL
R = ρL/A
where;
ρ is resistivity of the wireR is resistance of the wireL is lengthA is areaDecrease in length of the wire will cause a decrease in the resistance of the wire, and it will increase the current flowing in the wire, causing the bulb to glow brighter.
Learn more about resistance of wire here: https://brainly.com/question/2908881
#SPJ1
What is a car’s acceleration if it increases its speed from 5 m/s to 20 m/s in 3 s? 10 m/s2 –15 m/s2 15 m/s2 5 m/s2
Answer:
5 m/s²
Explanation:
Acceleration = change in speed/time taken
20-5=15
15/3= 5 m/s²
A 0.3Kg mass of liquid is heated from 20°C to 53°C. The specific heat capacity of the
liquid is 22001/Kg C. How much energy is transferred to the liquid?
The total energy is transferred to the liquid is = 217809.9 J
Given:-It is given in the question that—
weight of the liquid= 0.3kg
specific heat capacity=22001/kg C
temperature changes between 20°C to 53°C
Solution:-we can easily solve this problem by using the formula of the calorimetry principle.
The formula is —
Q= m×s×t [Q=total energy is transferred, m= mass of the substance, s= specific heat, t= final temperature - initial temperature]
by putting the value on what is given in this question —
Q= 0.3×22001×(53-20)
= 217809.9 J
So energy transferred to the liquid is=217809.9 J
what is the most similar to the Sun in luminosity and temperature
Explanation:
At a distance of 4.25 light years, Proxima is the closest-known star to our solar system. Science of the Alpha Centauri system. The two stars that make up Alpha Centauri, Rigil Kentaurus and Toliman, are quite similar to our sun
45 V =
2.0 Ω
www
6.0 Ω
3.0 Ω
>4.0 Ω
What is the equivalent resistance in this circuit?
Ω
What is the current in this circuit?
A
Answer:
Current = 22.5A
Explanation:
By using ohm's law [tex]i = \frac{v}{q} [/tex]45/2 = 22.5A forces of 5 N accelerates an object. The object’s mass is 50 g. What is the acceleration of the object? (Formula: F=ma)
Answer:
100 m / s^
F =ma from this divided F and ma by m to get acceleration
a = F / m
a = ?
F = 5 N
m = 50 g = 0. 0 5 kg ; if 1 kg = 1000g how much kg of 50 g by criss cross method we get 0.05 kg
so; 5N / 0. 05 kg = 5kg m / s^ / 0.05 kg
kg cancel by kg
the result is 100 m/ s^
Answer
A)
B
C
please
Answer:
a is b is c isExplanation:
brash this so hard
The student notices that the electronic balance has a zero error, so it shows
mass readings that are all slightly too small.
This means that the density value is
A)incorrect and slightly too large
B)incorrect and slightly too small
C)correct because the student used three significant figures
D)correct because the mass of the block is more than zero
The student notices that the electronic balance has a zero error, so it shows mass readings that are all slightly too small. This means that the density value is incorrect and slightly too small. The correct option is B.
The density is the ratio of the mass and the volume of the object. It is denoted by ρ.
ρ = mass/Volume = m/V
The student notices that the electronic balance has a zero error, so it shows mass readings that are all slightly too small.
As mass is directly proportional to density. The density will also be slight small when mass reading are all slightly small.
Thus, the correct option is B.
Learn more about density.
https://brainly.com/question/9215083
#SPJ1
sandra is riding a bice at 10.0 meters/second. she slows down to 2.0 meters/second in 10 seconds. her acceleration is blank meters/seconds^2
Explanation:
[tex]a = \frac{v - v _{i} }{t} [/tex]
Her intial velocity is 10
Her final velocity is 2
Time is 10 seconds.
[tex]a = \frac{2 - 10}{10} [/tex]
[tex]a = - \frac{4}{5} [/tex]
PLANETARY MOTION: When the masses of two objects are doubled, which of the following would happen to the gravitational force between the two objects?
Answer:
So as the mass of either object increases, the force of gravitational attraction between them also increases. If the mass of one of the objects is doubled, then the force of gravity between them is doubled.
Explanation:
Welcome
A stunt pilot in an air show performs a loop-the-loop in a vertical circle of radius 3.80 103 m. During this performance the pilot whose weight is 623 N, maintains a constant speed of 2.10 102 m/s. (a) When the pilot is at the highest point of the loop determine his apparent weight in N. N (b) At what speed, in m/s, will the pilot experience weightlessness
The apparent weight of the pilot would be 619.48 N and the speed he would experience at weightlessness is 192. 97 m/s
What is apparent weight?
Apparent weight is a property of object that co-relates to the heaviness of the object.
It differs from the weight of an object as a result of the in-balance between the force acting on the object and an equal but opposite force
How to calculate the apparent weight
Formula:
Apparent weight = Real weight (mg) - m v∧2 ÷ r
Where m = mass
g = acceleration due to gravity = 9.8 m/s²
v = constant velocity = 2. 10 × 10∧2 m/s
r = radius = 3.80 × 10∧3 m
Note that weight = mg
m = weight ÷ g = 623 ÷ 9.8 = 63. 57 kg
a. Apparent wieight = 623 - (63. 57 × 2.10 × 10∧2 × 2.10 × 10∧2) ÷ 3.80 × 10∧3)
= 623 - (63.57 × 210) ÷ 3800
= 623 - 13377 ÷ 3800
= 623 - 3. 52
= 619.48 N
b. At weightless, weight = 0
Speed, V = √g× r = √ 9.8 × 3800 = √37,240 = 192. 97 m/s
Hence, The apparent weight of the pilot would be 619.48 N and the speed he would experience at weightlessness is 192. 97 m/s
Read more on apparent weight here:
https://brainly.com/question/11180653
#SPJ1
what term refers to the limited air transfer that takes place once the station has been launched?
A: closed environment
B: exposed environment
C: secure environment
D: open environment
Closed environment refers to the limited air transfer that takes place once the station has been launched.
What is a Closed environment?
This is an environment which has little or no interference with the atmosphere.
Launching of station in a closed environment will help prevent damages done as a result of exposure to radiations etc.
Read more about Environment here https://brainly.com/question/17413226
#SPJ1