Answer:
in this situation we have given a car note engine whose efficiency is 40%. Now it is told that it is desired to have an efficiency of 60%. Then we have to find the thing temperature force him intact temperature as we know that efficiency is given by that is neat is equal to this is one minus the lower temperature upon t higher temperature here lower temperature is the temperature of think and higher temperature is the temperature of source. So we can say that in the first case we are given the efficiency that is 40%. So this is 4100 is equal to, this is one minus deal upon, this is 500 From here we can find the value of lower 10%. This will comes out to be 300 Calvin. No, we have given that the efficiencies 60%. So we can the lower temperature remains him that is 300 Calvin. And we have to find the higher temperature. So we can say that this is 60 upon 100 is equal to this is one minus 300 upon th from here we can find the value of higher temperatures. So this is 300 upon th is equal to disease 40 by 100. Or we can say yes, you'll come out to be 7 50 Calvin. So this is the temperature and this is our answer for this. Given to shin. So we can say for that option, B is the correct choice. Thank you
Explanation:
the yacht shown below has a mass of 8300kg. determine its weight in air [ Acceleration due to gravity, g = 10 N kg¹
[tex]w = mg [/tex]
Answer:
83000kg
Explanation:
mass=8300kg
g=10
w=mg
8300×10=83000kg
The diagram shows an incomplete scale drawing to find the resultant of two 10N forces acting at a point in the direction shown
The resultant of the two 10N forces acting at a point in the given direction is the single force which will have the same effect as all the forces acting at that point.
What is the resultant of forces?The resultant of two or more forces is that single force which will have the same effect as all the forces acting at that point in a given direction.
Since forces are vector quantities, the resultant force is obtained by vector addition.
The direction of the forces are also obtained.
Therefore, the resultant of the two 10N forces acting at a point in the given direction is the single force which will have the same effect as all the forces acting at that point.
Learn more about resultant force at: https://brainly.com/question/8119756
#SPJ1
If you had to choose a theory that best represents your own view of development, would you choose a single theory or would you select components of several different theories? what aspect of your chosen theory (or theories) make it more attractive than others
I would select components of several different theories and the aspect which will be more attractive will be the one which has similarities and accurate.
What is a Theory?This is defined as a proposed explanation for a particular phenomenon or occurrence.
Components of several different theories will bring different dimensions and factors to the occurrence which will help in its thorough analysis.
Read more about Theory here https://brainly.com/question/11555274
#SPJ1
Which SI units are used to describe energy
Answer:
The SI units used to describe energy is Joule (J)
What would happen if the atmosphere consisted of pure oxygen.
Answer:
Then our fires would become massive.
Explanation:
Hope this helps
Which of the following desribes a displacement vs. time graph that looks like
this?
Time
A. constant non-zero acceleration
B. increasing velocity
C. constant velocity
D. decreasing acceleration
When a wire with an electric current i is placed in a magnetic field of strength b it experiences a magnetic force f. What is the direction of f?
The direction of force, when electric current and magnetic field direction given is at 90° to the plane containing current I and Magnetic field B.
What is magnetic force?The force of attraction or repulsion experienced by a magnetic material when it enters the magnetic field.
When a wire with an electric current I is placed in a magnetic field of strength B it experiences a magnetic force F.
According to the Fleming's right hand rule, the direction can be determined by knowing any two parameter's direction.
Thus, The direction of force is at 90° to the plane containing current I and Magnetic field B.
Learn more about magnetic force.
https://brainly.com/question/10353944
#SPJ4
If it takes you 10 seconds to move a chair 5 meters across the floor, using a force of 2 Newtons, how much power did you put out?
20 joules per second
100 joules per second
O 1 joules per second
4 joules per second
Answer:
power=work done÷time taken
2×5=10
10÷10=1
ans 1J per second
The law of conservation of momentum states that, if left alone, what happens to the total momentum of two interacting objects that make up a system?
Answer:
The momentum of the colliding bodies before and after the collision remains constant.
Explanation:
The momentum is constant.
i need help with this!!
Answer:
183
Explanation:
Ohm's Law states that Resistance = Voltage / Current, so:
220/1.2 = 183.333
How fast would you (70kg) need to run in order to have the same momentum as a car (750kg) driving at 5 km/hr?
From the calculations and the data provided, the speed is obtained as 15 m/s
What is momentum?The term momentum refers to the product of mass and velocity. Given that we can now proceed with the answer.
Since;
p = mv
m = 750kg
v = 5 km/hr or 1.4 m/s
p = 750kg * 1.4 m/s
p = 1050 kgm/s
If the mass of the body is 70kg, the speed is
v = p/m
v = 1050 kgm/s/70 Kg
= 15 m/s
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
4) An electron in a mercury atom changes from
energy level b to level e. This energy-level
change occurs as the atom.
(1) absorbs a 2.03-eV photon
(2) absorbs a 5.74-eV photon
(3) emits a 2.03-eV photon
(4) emits a 5.74-eV photon
The energy-level change occurs as the atom is absorbs a 2.03-eV photon.
Energy change of the mercury atom
The energy change of the mercury atom is calculated as follows;
Energy emitted by a photon when it falls from level b to energy level e is calculated as follows;
ΔE = -3.71 eV - (-5.74 eV)
ΔE = -3.71 eV + 5.74 eV
ΔE = 2.03 eV
When electron jumps from lower energy level to higher energy level, energy is absorbed, thus, the energy-level change occurs as the atom is absorbs a 2.03-eV photon.
Learn more about energy level here: https://brainly.com/question/14287666
#SPJ1
Maria throws two stones from the top edge of a building with a speed of 20 m/s. She throws one straight down and the other straight up. The first one hits the street in a time t1. How much later is it before the second stone hits
Maria throws two stones from the top edge of a building at a speed of 20 m/s, The time is mathematically given as
t=4.5 sec.
How much later is it before the second stone hits?Generally, the equation for speed is mathematically given as
V = u+at
Therefore
0 = 22-9.8xt.
t = 22 /9.8 sec
t = 2.24489.
The same time will be taken from max^m height to point O
The extra time is taken
t=4.49 sec.
t=4.5 sec.
Read more about Time
https://brainly.com/question/4931057
#SPJ1
The source of all magnetic fields is:
- moving charges
- the earth's gravity
- the aurora borealis
- solar fields
Answer:
Moving charges
Explanation:
The source of all magnetic fields is moving electric charge: whether it is current in a wire, unpaired electrons in an atomic orbital, convection currents in the earth's liquid nickle /iron core, plasma in the sun, etc. moving electric charge is the source of all magnetic fields.
How does gravity influence our solar system? Claim Evidence Reasoning
Answer:
Gravity is what holds the planets in orbit around the sun and what keeps the moon in orbit around Earth. The gravitational pull of the moon pulls the seas towards it, causing the ocean tides. Gravity creates stars and planets by pulling together the material from which they are made.
Explanation: Hope it helps you :))))
Have a good day
the speed of all electromagnetic waves in emoty space is 3.0x10^8 m/s .calculate the wavelength for radio waves with frequency 100.0 mhz
Taking into account the definition of wavelength, frecuency and propagation speed, the wavelength for radio waves with a frequency of 100 MHz is 3 m.
Definition of wavelength, frecuency and propagation speedFirst of all, wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration. It is expressed in units of length (m).
On the other side, frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
Finally, the propagation speed is the speed with which the wave propagates in the medium, that is, it is the magnitude that measures the speed at which the wave disturbance propagates along its displacement.
The propagation speed relate the wavelength (λ) and the frequency (f) inversely proportional using the following equation:
v = f×λ
All electromagnetic waves propagate in a vacuum at a constant speed of 3×10⁸ m/s, the speed of light.
Wavelength for radio wavesIn this case, you know:
v= 3×10⁸ m/sf= 100 MHz= 100,000,000 Hz (being 1 MHz = 1,000,000 Hz)λ= ?Replacing in the definition of propagation speed:
3×10⁸ m/s = 100,000,000 Hz× λ
Solving:
λ= 3×10⁸ m/s ÷ 100,000,000 Hz
λ= 3 m
In summary, the wavelength for radio waves with a frequency of 100 MHz is 3 m.
Learn more about wavelength, frecuency and propagation speed:
brainly.com/question/2232652
brainly.com/question/7321084
brainly.com/question/14946166
#SPJ1
a carmboard 4ft x 4ft Square has the queen at the centre the queen is hit by the striker moves to the front edge, rebounds and goes inta hole behind the striking line. find the magnitude of displacement of queen a) from the centre to front edge b) from the front end edge to hole (c) from centre to hole.
Diagonal of cardboard=displacement to hole
√4²+4²4√2So displacement till edge
4√2/22√2Total distance
4√2+2√26√2ftFrom centre to hole displacement
2√2if water completely boils in 7 minutes, how long does it take to evaporate
Answer: 20 minutes
Explanation: omm its 20 minutes
Which best describes deena’s error? the line for constant velocity is not horizontal; it is diagonal and slopes downward. the area of the rectangle and the triangle under the line should be added together for constant acceleration find acceleration by finding the area of the rectangle above the line. find velocity by calculating the slope of the line.
The statement best describes deena's error is: Find acceleration by finding the area of the rectangle above the line.
What is acceleration?Acceleration is given by the ratio of Resultant or total force acting on any object and the its mass.
Deena made a chart to summarize features of a velocity vs. time graph for objects with constant acceleration and objects with constant velocity.
In the velocity time graph, the area under the curve shows the displacement of the object and the slope represents the acceleration.
Thus, the deena's error is Find acceleration by finding the area of the rectangle above the line.
Learn more about acceleration.
https://brainly.com/question/12550364
#SPJ1
Answer:
What the other dude said
Explanation:
Gina is burning different fuels label the diagram
The answer for the missing labeling as (i) and (ii) will be (i)thermometer and (ii)condenser.
What is a burner?A burner is a device intended to guarantee that the flame is stabilized.
By creating a proper flow field to cause the initial temperature rise, a The fuel/air combination is heated from within the flame to the ignition temperature.
When the flame or heat is created in fuel-burning or heat-generating equipment.
Wood, coal, kerosene, LPG, petrol, and diesel are a few of the often utilized fuels. In order to cook, heat, power vehicles, and create electricity, we utilize fuels.
The barrel, collar, air holes, gas intake, gas valve, and base are the different pieces of a Bunsen burner. Each component is essential to the process of creating a flame.
Hence, the answers for the missing labeling will be (i) thermometer and (ii) condenser.
To learn more about the burner refer;
https://brainly.com/question/1477483
#SPJ1
During a certain chemical reaction, energy is transferred from the reaction system to its surroundings. Which statement is true in this situation? OA. The particles differ in potential energy instead of kinetic energy. B. The particles in the reaction system have more kinetic energy. C. The particles in the surroundings have more kinetic energy. OD. The kinetic energy of the particles in the system and its surroundings are the same.
The particles in the reaction system have more kinetic energy than the surroundings.
What is exothermic reaction?Exothermic reaction is a type of reaction in which energy is lost to the environment.
Internal energy (E) = kinetic energy (K.E) + potential energy (P.E)
Change in internal energy (ΔE) = K.E (particles) - K.E (surroundings)
Since energy is lost to the environment, we can conclude that the particles in the reaction system have more kinetic energy than the surroundings.
Learn more about exothermic reaction here: https://brainly.com/question/6357350
#SPJ1
Under water, Zachary can hear waves that travel with frequencies up to 15,000 Hz. What is the velocity of sound in water if a wave with this frequency has a wavelength of 1.2 m?
Answer:
18 000 m/ s
Explanation:
speed = wavelength * frequency
speed = 1.2 * 15 000 = 18 000 m/s
Gravitation always does negative work. question 48 options: true false
The statement indicating that 'Gravitation always does negative work' is FALSE.
What is Gravitation?Gravitation is a fundamental physical force that makes objects attract each other in the Universe.
This force (Gravitation) is required to maintain both constant positions and movement of objects.
In conclusion, the statement indicating that 'Gravitation always does negative work' is FALSE.
Learn more about Gravitation here:
https://brainly.com/question/557206
#SPJ1
Answer:false
Explanation:
-1 A 4m long wire of cross-sectional area 2.5 X 10 m² has a resistance of 5. The conductivity of the wire is (a) 2.5 X 10' m (b) 4.0 X 10' m (c) 2.5 X 10'' m¹ -1 -1 (d) 4.0 X 10''m'
Answer:
3.2 [tex]10^{-2} ohm^{-1} m^{-1}[/tex]
Explanation:
Resistance=5 ohm
Length=4m
Cross sectional area=2.5 x 10
Conductivity = 1/ resistivity
=[tex]\frac{length}{resistance x cross sectional area}[/tex]
Conductivity=4 /5 x 2.5 x 10
Conductivity=4/125
Conductivity=3.2x[tex]10^{-2}[/tex][tex]ohm^{-1} m^{-1}[/tex]
Two astronauts are taking a spacewalk outside the International Space Station. The first astronaut has a mass of 85.2 kg. The second has a mass of 65.4 kg. Initially, both astronauts have zero velocity relative to each other. Then, the astronauts push against each other, giving the first astronaut a final velocity of 1.2 m/s to the left. If the momentum of the system is conserved, what is the final velocity of the second person?
A. 1.3 m/s to the left
B. 1.6 m/s to the right
C. 1.6 m/s to the left
D. 1.3 m/s to the right
The final velocity of the second person after the collision is determined as 1.6 m/s to the right.
Final velocity of the second person
The final velocity of the second person is determined by applying the principle of conservation of linear momentum.
m1u1 + m2u2 = m1v1 + m2v2
85.2(0) + 65.4(0) = 85.2(-1.2) + 65.4(v2)
0 = -102.24 + 65.4v2
65.4v2 = 102.24
v2 = 1.56 m/s to the right
Thus, the final velocity of the second person after the collision is determined as 1.6 m/s to the right.
Learn more about linear momentum here: https://brainly.com/question/7538238
#SPJ1
explain the law of conservation of energy in your own words
Answer:
The law of conservation of mass states that the total energy of an isolated system remains constant over time.
Explanation: Hope it helps you :))))
Have a good day
Emmett is lifting a box vertically. Which forces are necessary for calculating the total force?
Fp, Ff, and Fg
Fp and FN
Fp, FN, and Ff
Fp and Fg
The forces necessary for calculating the total force are Fp and Fg. The correct option is d.
What is gravity?The force of attraction felt by a person at the center of a planet or Earth is called as the gravity.
The gravitational force, Fg is the attractive force exerted by the Earth on the object that is equal to the mass of the object times the gravitational acceleration.
Emmett is lifting a box vertically. There are only vertical forces acting on the box.
The vertical force must counteract the weight of the object, is the upward force applied on the object.
Thus, the forces necessary for calculating the total force is Fp - Fg.
Learn more about gravity.
brainly.com/question/4014727
#SPJ1
label the diagram Please
The earth tilt about 23 degrees which leads to the formation of seasons on earth.
At what degree the earth tilt?This is tilted at 23 degrees from the vertical. The northern hemisphere is in the winter season.
This is the path as the earth revolves around the sun. It takes 1 year to complete this path.
This is the path as the earth rotates around its.
So we can conclude that the earth tilt about 23 degrees which leads to the formation of seasons on earth.
Learn more about season here: https://brainly.com/question/25870256
#SPJ1
Sheila weighs 60 kg and is riding a bike. Her momentum on the bike is 340 kg • m/s. The bike hits a rock, which stops it completely and throws Sheila forward onto the pavement.
If there is no net force on the system, what is Sheila’s velocity immediately after she is thrown from the bike?
1.8 m/s
2.0 m/s
5.0 m/s
5.7 m/s
From the calculation, Sheila’s velocity immediately after she is thrown from the bike is 5.7 m/s.
What is momentum?Momentum is the product of mass and velocity. We know that the momentum before collision is equal to the momentum after collision.
Hence;
Momentum before collision = 340 kg • m/s.
Momentum after collision = 60v
Thus;
340 kg • m/s = 60v kg • m/s
v = 340 kg • m/s/60 Kg
v = 5.7 m/s
Learn more about momentum:https://brainly.com/question/24030570
#SPJ1
How does gravity relate to potential energy?
Answer:
the potential energy a massive object has in relation to another massive object due to gravity
Answer:
PE uses the acceleration of gravity in its calculation definition
Explanation:
Potential Energy = mass * acceleration of gravity * height