The position is the strength of the magnetic field strongest is is the place where the magnetic field leaves, being point A.
What generates a magnetic field?When an electrically charged particle moves, it creates a magnetic field. According to the laws of electromagnetism, this magnetic field originates from the variation of the electric field strength.
In the region of the poles we see that the lines of magnetic induction are closer to each other, therefore, we consider that close to the poles the magnetic field is more intense.
See more about magentic field at brainly.com/question/14848188
#SPJ1
In industrialized states every tenth adult suffers daily, and every third occasionally, from heartburn. In Germany almost ten million people are affected by this disease. Helpful medicines against heartburn are the so-called ‘antacids’.
Antacids bound acids against an over-acidification of the stomach. The stomach acid contains hydrochloric acid (HCl, dissolved in water), which reacts with the antacid to form water, carbon dioxide and the corresponding salt. Generally, antacids are carbonates. Very common is ‘Bullrichs salt’, which uses sodium hydrogen carbonate as active ingredient. A single dose of an antacid is to be chosen in a way that it will react with two grams of hydrochloric acid. You are to formulate the instruction leaflet for a pharmaceutical company, which sells calcium carbonate (CaCO3) as an antacid. The dosing instruction says that in case of heartburn, one tablet with sufficient water is to be ingested.
But the specification, how many grams of calcium carbonate one tablet contains, is still missing…
Answer:
Antacids are medicines that counteract (neutralise) the acid in your stomach to relieve indigestion and heartburn. They come as a liquid or chewable tablets and can be bought from pharmacies and shops without a prescription.
(i) Give the two dyes that are mixed to make brown hair dye.
Answer:
green n yellow and white and black and white sq
What differences do you notice when you heat up the brick and the iron at same temperature?
After heating the brick and the iron, it is observed that the brick heats up quicker and the brick releases energy quicker.
What is thermal energy?Thermal energy (also called heat energy) is produced when a rise in temperature causes atoms and molecules to move faster and collide with each other.
The iron has more energy than the brick even though it is at the same temperature. That means that the iron must have more particles than the brick.
Iron and brick are both solids and have the same volume, so the difference in total energy must be due to atomic composition.
Learn more about thermal energy here:
https://brainly.com/question/14506133
#SPJ1
PLS I WILL GIVE BRAINLY How do the number of violence electrons of the light metals compared to those heavier than boron
The valence electron of the light metals are all in the range of 1 to 3.
What are Valence electron ?Valence Electron is the number of electrons in the outer shell of an atom which participate in bond formation.
Number of Valence Electron in Boron is 3 and other light metals lighter than Boron have 1 , 2 of Lithium and Beryllium respectively,
The valence electron of the light metals are all in the range of 1 to 3.
To know more about Valence Electron
https://brainly.com/question/12717954
#SPJ1
Can anyone help me figure this out
Answer:
go with the fourth one because I did that one
density is ______ to pressure
Answer:
When pressure increases, density increases.
When the pressure decreases, density decreases.
When density increases, pressure increases.
When density decreases, the pressure decreases.
Explanation:
compare molecular & covalent network crystal solid?
Answer:
Molecular solids and covalent network solids are two types of solid compounds. The key difference between molecular solid and covalent network solid is that molecular solid forms due to the action of Van der Waal forces where as covalent network solid forms due to the action of covalent chemical bonds.
hope this helps
Two chemicals react in an endothermic reaction. what can be known about this reaction? the new substance will need more energy to form its chemical bonds than the old substance will release. more energy will be released from the old substance than the new substance will need to form its chemical bonds. a precipitate will form as a result of the reaction. a gas will form as a result of the reaction.
The new substance will need more energy to form its chemical bonds than the old substance will release. Hence, option A is correct.
What is an endothermic reaction?Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
Endothermic reactions, in general, are those that absorb (or use) energy. In endothermic reactions, more energy is absorbed when bonds in the reactants are broken than is released when new bonds are formed in the products.
Normally, when a chemical bond is broken, energy is released in the process. The chemical bond formation also demands an energy input.
The energy that is supplied/released can come in varieties (such as heat, light, and electricity). The formation of chemical bonds following the absorption of heat from the environment characterizes endothermic processes.
When two chemicals react in an endothermic reaction the new substance will need more energy to form its chemical bonds than the old substance will release. Hence, option A is correct.
Learn more about the endothermic reaction here:
https://brainly.com/question/23184814
#SPJ1
which compund do not exist in independant molecular form
Answer:
Ionic compounds do not exist in independent molecular form
-Lexi
For which process would the pictured cell be used?
Producing electricity
Splitting a compound into its elements
Purifying a metal
Coating a material with metal
Answer:
Coating a material with metal
(SInce the glasses will be coated with gold.)
At what temperature would 0.46 moles of a gas occupy 13.3 L if the pressure is 734 mm Hg?
Answer: 339.84 K
Explanation:
[tex]$$We are given: \\$\mathrm{n}=0.46$ moles \\$V=13.3 \mathrm{~L}$\\$\mathrm{P}=734 \mathrm{~mm} \mathrm{Hg}=0.965 \mathrm{~atm}$\\Putting these values in ideal gas equation we get:\\$0.965$ batm * $13.3 \mathrm{~L}=0.46 \mathrm{~mol} * 0.0821 \frac{\mathrm{atmL}}{\mathrm{molK}} * \mathrm{~T}$\\$\mathrm{T}=\frac{0.965 * 13.3}{0.46 * 0.0821} \mathrm{~K}$$$\mathrm{T}=339.84 \mathrm{~K}$$[/tex]
20 ml of a mixture of C2H6 and C3H8 gases in X : Y mole ratio, is burnt completely by which 52 ml CO2 gas is evolved. If 20 ml of a mixture of CH4 and C4H10 gases in Y : X mole ratio is burnt completely then what is the volume (in ml) of CO2 gas evolved?
A) 40 B) 44 C) 50 D) 55
The volume of CO2 prodiced when 12 mL of CH4 and 8 mL of C4H10 is burnt is 56 mL.
What is the equation of the reaction?The equation of the combustion of C2H6, CH4, C4H10, and C3H8 gases are given below:
2 C2H6 + 7 O2 ---> 4 CO2 + 6 H20
C3H8 + 5 O2 ---> 3 CO2 + 4 H20
CH4 + 2 O2 ----> CO2 + 2 H2O
2 C4H10 + 13 O2 ---> 8 CO2 + 10 H2O
X moles of C2H6 will produce 2X moles of CO2
Y moles of C3H8 will produce 3Y moles of CO2
Thus;
X + Y = 20 mL
X =20 - Y ---(1)
2X + 3Y = 52 mL ---(2)
Solving for X by substituting in (2)
2 (20 - Y) + 3Y = 52
40 - 2Y + 3Y = 52
Y = 12 mL
Then X = 8 mL
Volume of CO2 produced when 12 mL of CH4 and 8 mL of C4H10 is burnt = (12 × 2 + 8 × 4) = 56 mL
Therefore, the volume of CO2 produced is 56 mL.
Learn more about moles of gas and volume at: https://brainly.com/question/23883946
#SPJ1
Select the correct answer from each drop-down menu. a 126.1-gram block of granite at 92.6°c is dropped into a tub of water at 24.7°c in an isolated system. the final temperature of both the granite and the water is 51.9°c. the specific heat capacity of granite is 0.795 joules/gram degree celsius, and the specific heat capacity of water is 4.186 joules/gram degree celsius. the granite block transferred of energy, and the mass of the water is .
Taking into account the definition of calorimetry, the mass of water is 35.70 grams.
What is calorimetryCalorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where:
Q is the heat exchanged by a body of mass m.c is the specific heat substance c. ΔT is the temperature variation.Mass of water in this caseIn this case, you know:
For granite:
Mass of granite= 126.1 gInitial temperature of granite= 92.6 °CFinal temperature of granite= 51.9 ºCSpecific heat of granite = 0.795 [tex]\frac{J}{gC}[/tex]For water:
Mass of water = ?Initial temperature of water= 24.7 ºCFinal temperature of water= 51.9 ºCSpecific heat of water = 4.186 [tex]\frac{J}{gC}[/tex]Replacing in the expression to calculate heat exchanges:
For gold: Qgranite= 0.795 [tex]\frac{J}{gC}[/tex] × 126.1 g× (51.9 °C - 92.6 °C)
For water: Qwater= 4.186 [tex]\frac{J}{gC}[/tex]× mass of water× (51.9 °C - 24.7 °C)
If two isolated bodies or systems exchange energy in the form of heat, the quantity received by one of them is equal to the quantity transferred by the other body. That is, the total energy exchanged remains constant, it is conserved.
Then, the heat that the gold gives up will be equal to the heat that the water receives. Therefore:
- Qgranite = + Qwater
- 0.795 [tex]\frac{J}{gC}[/tex] × 126.1 g× (51.9 °C - 92.6 °C)= 4.186 [tex]\frac{J}{gC}[/tex]× mass of water× (51.9 °C - 24.7 °C)
Solving:
4,080.15465 J= 4.186 [tex]\frac{J}{gC}[/tex]× mass of water× 27.3 °C
4,080.15465 J= 114.2778 [tex]\frac{J}{g}[/tex]× mass of water
mass of water= (4,080.15465 J)÷ 114.2778 [tex]\frac{J}{g}[/tex]
mass of water= 35.70 grams
Finally, the mass of water is 35.70 grams.
Learn more about calorimetry:
brainly.com/question/11586486
brainly.com/question/24724338
brainly.com/question/14057615
brainly.com/question/24988785
#SPJ1
How do you know which element the little number (subscript) goes with?
Answer:
you will not
Explanation:
the little subscript number just indicates how many of a certain atom is in a molecule... example H₂O... that little ₂ means that there are 2 hydrogen atoms in the water molecule.
there is an invisible ₁ on the O as well. H₂O₁ shows there is one oxygen atom in the water molecule, but we do not show the 1
Answer:
The little number you see to the right of the symbol for an element is called a subscript. That number indicates the number of atoms of that element present in the compound. When balancing an equation, you can change the coefficients but not the subscripts.
a person who eats three servings of the cereal without milk will consume__ calories__ grams of carbohydrates
A person who eats three servings of the cereal without milk will consume about 117 percent of calories.
What is Calorie?This is defined as a unit of energy and is commonly used in the body system.
One serving of cereal without milk will contain 39 percent of calories while three servings will be 117 percent.
Read more about Calorie here https://brainly.com/question/1178789
#SPJ1
Identify a cation. An atom that has gained a proton. An atom that has lost an electron. An atom that has gained an electron. An atom that has lost a proton.
the answer would be B an atom that has lost an electron
An atom has eight protons and nine neutrons. draw the atomic structure of the atom
An atom has eight protons and nine neutrons. The atomic structure of the atom is attached below in image.
What is an atomic structure ?The term "atomic structure" describes the structure of an atom, which has a nucleus that contains both protons and neutrons . The centre of the nucleus is circled by the negatively charged electrons.
The smallest piece of ordinary matter within an element is called an atom. Protons, neutrons, and electrons are the three subatomic particle types that make up an atom.
An isotope's number is equal to the sum of its protons plus neutrons since their masses are almost identical. Oxygen 16 therefore has 8 protons and 8 neutrons, followed by oxygen 17 with 8 protons and 9 neutrons, and oxygen 18 with 8 protons and 10 neutrons.
To learn more about an atomic structure, follow the link;
https://brainly.com/question/14156701
#SPJ2
What kind of scientist would study how mistletoe harms trees
Answer:
A Dendrologist! They are the type of Scientist that studie trees.
Based on Charles's law, which of the following statements is true for an ideal gas at a constant pressure and mole amount?
The number of collisions is independent of volume.
The number of collisions decreases with increase in volume.
Volume is directly proportional to absolute temperature.
Volume is inversely proportional to absolute temperature.
Answer:
the number of collisions is independent of Volume.
Based on Charles's law, an ideal gas at a constant pressure and mole amount is " the number of collisions is independent of volume."
What is Charles's law?Gases have a propensity to expand while heated, according to Charles' law, an innovative gas law.
What is collisions?A collision would be any situation in where two or even more bodies quickly number of factors on one another.
Based on Charles's law, an ideal gas at a constant pressure and mole amount is " the number of collisions is independent of volume."
Therefore, the correct answer will be option (A).
To know more about collisions and Charles's law
https://brainly.com/question/16927784
#SPJ3
question -What happens to the energy of a wave if the amplitude of the wave is doubled?
The energy carried by the waves depends on the amplitude of the wave. If the amplitude is doubled then the energy gets increased by four times.
What is amplitude?The amplitude of a wave is the distance from the center line to the trough or the crest of the wave. The energy of the wave is directly proportional to the square of the amplitude.
E ∝ A²
So if the amplitude is doubled then E = 4. Hence, the energy gets increased quadruples times. The energy is related to the frequency and the wavelength of the wave that travels.
Therefore, the energy gets increased by four times if the amplitude is doubled.
Learn more about amplitude here:
https://brainly.com/question/27141337
#SPJ1
Identify the examples of experiences. Select three options.
Connie has good hearing ability.
Daryl has visited many other countries.
Alfonso has developed many strong friendships
Thelma has decided to audition for a role in a television show.
Sherry has set a goal of reading fifty books in a year.
Marion has worked at jobs that improved his time-management skills.
i need help!!!
Experience refers to something that happens in a person's life that leaves an indelible mark on the person.
What is an experience?The term experience refers to something that happens in a person's life that leaves an indelible mark on the person.
The following are experiences;
Daryl has visited many other countries.Alfonso has developed many strong friendshipsMarion has worked at jobs that improved his time-management skills.Learn more about experiences:https://brainly.com/question/11256472
#SPJ1
Answer:
Experience refers to something that happens in a person's life that leaves an indelible mark on the person.
What is an experience?
The term experience refers to something that happens in a person's life that leaves an indelible mark on the person.
The following are experiences;
Daryl has visited many other countries.
Alfonso has developed many strong friendships
Marion has worked at jobs that improved his time-management skills.
Explanation:
Having problems figuring out molar mass in general. steps would be most appreciated.
Answer:
The periodic table
Explanation:
As you can see in the screenshot. Each element on the periodic table has an atomic number and a mass number. The atomic numbers are arranged in numerical order from right to left in the periodic table. The second number there is the atomic mass.
When doing stoichiometric ratios, you need to use the atomic mass of each element to determine the molecular/molar mass.
example. Find the molar mass of
H₂SO₄
Hydrogen (2) + sulphur (1) +oxygen (4)
= atomic mass of H(2)+ atomic mass S(1)+ atomic mass oxygen(4)
=1(2) + 32(1)+16(4)
=2+32+64
=98
N.B We do not use the co-efficient when looking for molar mass, we only use the atom and subscript
If 0.094 moles of magnesium react with excess oxygen, how many moles of magnesium oxide would be formed?
The equation for this reaction is
[tex]\text{Mg}+\text{O} \longrightarrow \text{MgO}[/tex]
This means that for every mole of magnesium consumed, 1 mole of magnesium oxide is produced.
So, the answer is 0.094 moles.
Which type of scientist would most likely study how electricity could be
produced more efficiently?
Electrical engineers are the scientists that study the production of electricity more efficient.
Which type of scientist would study how electricity could be produced more efficiently?
Electrical engineers are the type of scientist that would most likely study how electricity could be produced more efficiently because they produced new technologies which are cost efficient as well as produce high amount of electricity.
So we can conclude that electrical engineers are the scientists that study the production of electricity more efficient.
Learn more about electricity here: https://brainly.com/question/776932
#SPJ1
Which of the following atoms require the greatest amount of ionization energy? Cu, Ag, or Au
Ionization energy is the periodic property of an element. The copper atom has the highest ionization energy among gold and silver atom.
What is ionization energy?Ionization energy is the amount of energy required for the removal of the loosely bounded electron from an atom. The ionization energy can be first, second, and third based on the number of electrons.
Ionization energy down the group decreases from top to bottom as the atomic radii of the element increase. So, the ionization energy for the given elements is Cu > Au > Ag.
Therefore, copper has the highest ionization energy.
Learn more about ionization energy here:
https://brainly.com/question/14141553
#SPJ1
A company is announcing the construction of a new skyscraper to the public. Which model will give the best idea of how the new building will change the city skyline?
A.
a drawing showing the interior of the building
B.
a full scale, three-dimensional model of the building
C.
a rough sketch of the building's shape
D.
a drawing showing both the new and old buildings
Answer:
D.
Explanation:
This is because this option would allow one to see the sorroundings of the new building. The others only give perpectives on what the new building looks like, isolated from its sorroundings.
what is the specific heat capacity of propan-1-ol
Answer:
14
Explanation:
sun normal persentage is 14
V2 = (P1 × V1 × T2) (P2 × T1) A gas with a beginning pressure of 2 atm at a temperature of 300 K has a volume of 20 ml. What will be the new volume if the pressure increases to 4 atm and the temperature is lowered to 200 K?
6.6ml will be the new volume if the pressure increases to 4 atm and the temperature are lowered to 200 K.
What is an ideal gas equation?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
Given data:
[tex]V_1=20 ml[/tex]
[tex]T_1=3[/tex]
[tex]P_1=2 atm[/tex]
[tex]T_2=200 K[/tex]
[tex]P_2=4 atm[/tex]
[tex]V_2=?[/tex]
Using equation:
[tex]V_2 =[/tex] [tex]\frac{P_1 X V_1 XT_2}{P_2 X T_1}[/tex]
[tex]V_2 =[/tex][tex]\frac{2 atm X 20 ml X200 K}{4 atm X 300 K}[/tex]
[tex]V_2 = 6.6 ml[/tex]
Hence, 6.6ml will be the new volume if the pressure increases to 4 atm and the temperature are lowered to 200 K.
Learn more about the ideal gas equation here:
#SPJ1
if energy can neither be created nor destroyed, into what kinds of energy have these resources been transformed?
Answer:
Heat, Sound
Explanation:
I am pretty sure you are addressing mechanical energy and machine efficiency. So you are probably aware a machine can't achieve 100% efficiency because of the first and second laws of thermodynamics. This energy is lost to friction and air resistance. They convert some gravitational potential energy to heat and sound energy rather than all to kinetic energy, and vice versa.
Which two phase changes occur when you increase the heat?
Answer:
Heat going into a substance changes it from a solid to a liquid or a liquid to a gas. Removing heat from a substance changes a gas to a liquid or a liquid to a solid.
Liquid → Gas:
VaporizationGas → Liquid:
CondensationSolid → Liquid:
Melting or fusion
Solid → Gas: Sublimation
Explanation: