0.630 moles of sodium chloride are how many grams (with calculation)
Answer:
Heyaa!! Im Pinky and Im here to inform you that your answer is...
Explanation:
!!! 36.8189451 Grams !!!
Have an amazing day!!!
~Pinky~!!
2
A chart with the densities of four metals is shown.
Metal
Density (gicm')
Titanium
4.5
Zinc
7.1
Nickel
88
Silver
10.5
Students were given a sample of an unknown metal and told to determine
its density. They measured its mass as 26.4 g and its volume as 3.0 cm?
Use the chart to determine which metal the students were given.
Answer:
mass(m)=26.4g
volume (v)=3.0cm²
we have
density =m/v=26.4/3=8.8g/cm³
since it is equal to density of nickel.
Option C nickel is a required answer.
Answer:
[tex]\huge\boxed{\fcolorbox{green}{yellow}{option \: \: c}}[/tex]
Hikers have noticed that a sealed bag of potato chips puffs up when taken to the top of a mountain. Suppose that at the valley floor below, the air pressure is 1.0 atm, temperature is 25°C, and the volume of the chip bag is 0.985 L. At the top of the mountain, the temperature is 22°C and the chip bag has puffed up to 1.030 L.
What is the air pressure on top of the mountain?
__ atm
Answer:
0.95
Explanation:
trust
Which of these is a polar molecule?
1. SH2
2. CO2
3. F2
What can be different between the products and reactants in a balanced chemical equation ? A)Total mass
B)Total moles of individual elements
C)Number of molecules D)Types of atoms
In a chemical reaction, the very same atoms were present both in the reactants and products, but they are reorganised as a result of the reaction.
How do reactions take place?Opposition against an influence, force, or movement. preference for an antiquated political, social, and policy system, in particular. a response to a certain process, situation, or stimulus. She was shocked by the information. Substances are made up of chemical compounds and chemical constituents.
What does the word "force" mean?Due to forces, an item will either be in rest or moving. Consider a football that is motionless and resting just on ground as an example.
To know more about reaction visit :
brainly.com/question/28984750
#SPJ1
Will lithium become a cation or anion?
Answer:
Lithium Cation is a monovalent cation that is metabolized much like sodium and is important in many cellular functions inside or on the surface of cells. lithium has a single valence electron that is easily given up to form a cation. Because of this, lithium is a good conductor of heat and electricity as well as a highly reactive element, though it is the least reactive of the alkali metals
a concentrated solution of sulfuric acid, H2SO4, has a concentration of 18.0 M. How many mL of the concentrated acid would be required to make 250. mL of a 1.00 MH2SO4 solution?
Answer: A 13.88 mL of the concentrated acid would be required to make 250. mL of a 1.00 M [tex]H_{2}SO_{4}[/tex] solution.
Explanation:
Given: [tex]M_{1}[/tex] = 18.0 M, [tex]V_{1}[/tex] = ?
[tex]M_{2}[/tex] = 1.00 M, [tex]V_{2}[/tex] = 250 mL
Formula used to calculate the volume of concentrated acid is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\18.0 M \times V_{1} = 1.00 M \times 250 mL\\V_{1} = \frac{1.00 M \times 250 mL}{18.0 M}\\= 13.88 mL[/tex]
Thus, we can conclude that 13.88 mL of the concentrated acid would be required to make 250. mL of a 1.00 M [tex]H_{2}SO_{4}[/tex] solution.
Consider the reaction.
2HF(g) +
H2(g) + F2(g)
At equilibrium at 600 K, the concentrations are as follows.
[HF] = 5.82 x 10-2 M
[H2] = 8.4 x 10-3M
[F2] = 8.4 x 10-3M
What is the value of Kea for the reaction expressed in scientific notation?
O 2.1 x 10-2
102.1 x 102
1.2 x 103
0 1.2 x 10-3
Answer:
0.021
Explanation:
Step 1: Write the balanced equation
2 HF(g) ⇄ H₂(g) + F₂(g)
Step 2: Calculate the value of the concentration equilibrium constant
The concentration equilibrium constant (K) is equal to the product of the concentrations of the products raised to their stoichiometric coefficients divided by the product of the concentrations of the reactants raised to their stoichiometric coefficients.
K for this reaction is:
K = [H₂] × [F₂] / [HF]²
K = (8.4 × 10⁻³) × (8.4 × 10⁻³) / (5.82 × 10⁻²)² = 0.021
Would an alkali metal make a good replacement for tin in a tin can? Explain.
Answer:
No
Explanation:
If tin is heated, it can react with alkalis' with the release of hydrogen.
Tin is a great metal that is used for packaging purposes.
It does not react with any acid that may be present in the food material stored inside the tin can which makes it a useful metal. It keeps the food safe.However, if the tin in the tin can is replaced with alkali metals then they will readily react with the acid present in the food materials stored inside, thereby rendering the food unsafe.
https://brainly.com/question/18153051
HELPPPP ASAPP 10 POINTS
How are the electron structures of carbon (C) and oxygen (O) similar? PLEASE HELP
Answer:
Carbon and oxygen are similar in a few ways. They are both elements, which are the fundamental building blocks of all matter. This means that they both have protons and electrons. They also both have neutrons
List ways on how to lessen human impacts in the environment
Answer:
Explanation:
Completely turn off equipment like televisions and stereos when you're not using them.
Choose energy-efficient appliances and light bulbs.
Save water.
Lower your shades or close your curtains on hot days, to keep the house cool and reduce the use of electric fans or air-conditioning.
Let clothes dry naturally.
Keep lids on pans when cooking to conserve energy.
Use rechargeable batteries.
Don’t use “throw away” products like paper plates and napkins, or plastic knives, forks and cups.
Send electronic greetings over email, instead of paper cards.
If a book has a weight of 23.2 N on Earth, what is its mass?
Answer: Mass is 2,37 kg
Explanation: Weight G = mg, and g = 9.81 m/s² on Earth.
m = W/g = 23.2 N / 9.81 m/s²
Awnser all of them if you can its really EASY im feelin generous today 30 pts
Answer: 1. Synthetic Substance or Synthetic compound 2. Oil 3. Biofuels 4. Salt and Sugar 5. medicine 6. Synthetic 7. Background Knowledge and Visualizing
Explanation: Hope this helps! Good luck!
Answer:
1= synthetic substance
2= natural gas
3= alcohol
4=artificial musks
5= medicine
6= synthetic
7=Questioning the Text
Explanation: If my answers are correct please mark me as a brainlist.
Collisions only result in a reaction if the particles collide with a certain maximum energy called the activation energy of the reaction.
Answer: The statement collisions only result in a reaction if the particles collide with a certain maximum energy called the activation energy of the reaction, is false.
Explanation:
Activation energy is the minimum amount of energy required to initiate a chemical reaction.
So, when activation energy for a reaction is lower then molecules with lower energy can also participate in the reaction. As a result, more number of collisions will take place due to which an increase in the rate of reaction will takes place.
When activation energy for a reaction is larger then molecules with higher energy will not be able to participate in the reaction. As a result, less number of collisions will take place due to which a decrease in rate of reaction will occur.
Therefore, we can conclude that the statement collisions only result in a reaction if the particles collide with a certain maximum energy called the activation energy of the reaction, is false.
Answer:
true
Explanation:
particularly must collide with energy equal to or greater the
During a combustion reaction, 9.00 grams of oxygen reacted with 3.00 grams of CH4.
What is the amount of the leftover reactant?
0.74 grams of methane
0.89 grams of methane
1.22 grams of oxygen
1.45 grams of oxygen
Answer:
0.74
Explanation:
this is the correct answer. I followed a correct answer that had the same probelm with different values, swithxed it with mine, and got 0.75. So its basically 0.74
3. a. How many moles of NaCl are dissolved in 152 mL of a solution if the concentration of the solution is 0.364 M?
Answer:
Good luck man
Explanation:
Good luck man
no links pls it’s very unhelpful
answer : i don’t knowww :)
Right spelling:
Answer: I don’t know. :)
PLSSS HELP WITH THIS ASAP
Answer:
the property of air shown in the figure describe A.mass
M
Mass can be measured in local units like dharni pau eto. Discuss the advantages of using
standard units of mass over the local units of mass. (Any two points)
N2 Points)
soup answer
Answer:
1.They are reliable.
2.They dont vary from person to person
What are the three parts of modern cell theory. Choose all that apply.
A.) The cell is the smallest living unit in organisms
B.) All cells come from other pre-existing cells
C.) All living things are made of cells
D.) All organisms are multicellular
Answer:
a,b,c
Explanation:
Answer:
C
...................
How many moles are in 2.8x10^24 atoms of silicon?
Answer:
4.6 mol Si
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
[Given] 2.8 × 10²⁴ atoms Si
[Solve] moles Si
Step 2: Identify Conversions
Avogadro's Number
Step 3: Convert
[DA] Set up: [tex]\displaystyle 2.8 \cdot 10^{24} \ atoms \ Si(\frac{1 \ mol \ Si}{6.022 \cdot 10^{23} \ atoms \ Si})[/tex][DA] Divide [Cancel like units]: [tex]\displaystyle 4.64962 \ mol \ Si[/tex]Step 4: Check
Follow sig fig rules and round. We are given 2 sig figs.
4.64962 mol Si ≈ 4.6 mol Si
A 125.0-g sample of a metal heated to 100.0 ∘C and placed in a calorimeter that contains 250.0 g of water. The temperature rises from 24.3 ∘C to 27.2 ∘C. What is the specific heat capacity of the metal? Ignore the calorimeter in your analysis. Group of answer choices
Answer:
0.333J/g°C is the specific heat of the metal
Explanation:
The heat that the metaal gives is equal to the heat that water is absorbing. The equation is:
S(metal)*ΔT(metal)*Mass(metal) = S(H2O)*ΔT(H2O)*Mass(H2O)
Where S is specific heat, ΔT is change in temperature and mass the mass in grams of the metal and water.
Replacing:
S(metal)*(100.0°C-27.2°C)*125.0g = 4.184J/g°C*(27.2°C-24.3°C)*250.0g
S(metal) = 4.184J/g°C*(27.2°C-24.3°C)*250.0g / (100.0°C-27.2°C)*125.0g
S(metal) = 0.333J/g°C is the specific heat of the metal
calculate the ph of the solution [oh-] = 1x 10-11 m
a. 11.0
b. 12.0
c. 2.7
d. 3.0
Answer:
d. 3.0
Explanation:
First we calculate the pOH of the solution, using the following formula:
pOH = -log[OH⁻]pOH = -log[1x10⁻¹¹ M]pOH = 11.0Using the pOH we can calculate the pH of the solution, keeping in mind the relationship between pH and pOH:
pH = 14.0 - pOHpH = 14.0 - 11.0pH = 3.0The answer is option d.
If a blender is plugged into a 128 V outlet that supplies 7.9 A of current, what amount
of power is used by the blender?
Power (P) = Current (1) times Voltage (V)
P = (0) (V)
P=?
1 =7.9A
V=128V
100 W
01011.2 w
267 W
Answer:
Power = 1011.2 Watts
Explanation:
Given the following data;
Voltage = 128 Volts
Current = 7.9 Amperes
To find the power rating;
Mathematically, the power rating of an electrical device is given by the formula;
Power = current * voltage
Power = 128 * 7.9
Power = 1011.2 Watts
Name the sub atomic particles in part Z of a boron atom give the relative charges of these sub atomic particles
Answer:
Neutrons and protons
Explanation:
There are three fundamental subatomic particles, these are;neutrons protons and electrons.
Ernest Rutherford successfully showed that every atom does possess a central core that contain positively charged particles (protons) called the nucleus. Chadwick later discovered the existence of neutrons.
Both protons and neutrons are found in the nucleus. Z represents the nucleus of the boron atom and houses the neutrons and protons of the boron atom.
The best way to increase the amount of a solid solute dissolved in a saturated solution would be to
Answer:
The solubility of a saturated solution can be increased by increasing the temperature.
Explanation:
Temperature -- Generally, an increase in the temperature of the solution increases the solubility of a solid solute. For example, a greater amount of sugar will dissolve in warm water than in cold water. A few solid solutes, however, are less soluble in warmer solutions.
Which best describes the purpose of a fever?
Answer:
when you have a fever your body is trying to fight off a virus or some other kind of bad Bacteria
Explanation:
I think this because everyone has at least had a fever when they were sick and when you are sick you are likely to have a fever because your body is fighting off a bad bacteria
how many moles in 200 grams of Br
Balance the following equations.
Answer:
A) Mg + H2SO4 → MgSO4 + H2
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
C) CaO + H2O → Ca(OH)2
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
Explanation:
A) Mg + H2SO4 → MgSO4 + H2
The equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
This equation is balanced by putting 2 in front of HCl on the left hand side to balance the elements on the right hand side.
C) CaO + H2O → Ca(OH)2
Thus equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
This equation is balanced by putting 3 in front of Ag and 4 in front of HNO3 on the left hand side while we put 3 in front of AgNO3 on the right side to balance the elements on the right hand side.