Explanation:
20÷250 =12.5 and do it by using fourmulaes
You are working with an existing fiber optic installation in your building. you want to know the length of each cable that runs through the walls.which tool should you use
Answer:
you will use the OTDR tool ti will very much so help
Explanation:
What is the period of a wave that has a frequency of 300 hz?
Answer:
T = 0.003 s
(Period is written as T)
Explanation:
Period = time it takes for one wave to pass (measured in seconds)
frequency = number of cycles that occur in 1 second
(measured in Hz / hertz / 1 second)
Period : T
frequency : f
So, if we know that the frequency of a wave is 300 Hz, we can find the period of the wave from the relation between frequency and period
T = [tex]\frac{1}{f}[/tex] f = [tex]\frac{1}{T}[/tex]
to find the period (T) of this wave, we need to plug in the frequency (f) of 300
T = [tex]\frac{1}{300}[/tex]
T = 0.00333333333
So, the period of a wave that has a frequency of 300 Hz is 0.003 s
[the period/T of this wave is 0.003 s]
The diagram shows two sets of vectors that result in a
single vector.
50 m
200 m
100 m
R
250 m
What are the first two steps for finding the magnitude
of the resultant vector?
find the square of the first horizontal vector and the
square root of the first vertical vector
find the square root of the first horizontal vector and
the square root of the second horizontal vector
find the sum of the two horizontal vectors and the
sum of the two vertical vectors
find the difference between the two horizontal
vectors and the difference between the two vertical
vectors
The first two steps for finding the magnitude of the resultant vector is find the sum of the two horizontal vectors and the sum of the two vertical vectors.
Resultant of two vectorsThe resultant of two vectors is determined from Pythagoras theorem is as shown below.
R² = a² + b²
First two steps of finding a resultant vectorsfind the sum of the two horizontal vectors and the sum of the two vertical vectors.Thus, the first two steps for finding the magnitude of the resultant vector is find the sum of the two horizontal vectors and the sum of the two vertical vectors.
Learn more about resultant vectors here: https://brainly.com/question/110151
#SPJ1
You suspect that the power supply in your desktop pc is failing. you want to use a multimeter to test the power supply. which multimeter setting should you use
The multimeter setting should you use is between 11-12 volts. If the voltage is too high or too low, the power supply must be changed.
What is a multimeter?An instrument made to measure resistance, voltage, and electric current, often across a range of values.
You think your desktop computer's power supply is malfunctioning. To test the power supply, you should use a multimeter.
Between 11 and 12 volts should be seen on the multimeter. The power supply is failing and has to be replaced if it's too high or too low.
Hence, the multimeter setting should you use is between 11-12 volts.
To learn more about the multimeter refer:
https://brainly.com/question/5135212
#SPJ1
Explain how fusion and fission are similar to and different from each other at the atomic level. Explain which
process is currently used at most nuclear power plants around the world and which process occurs on the sun.
Please helpp
Nuclear fusion and fission involve changes in the nucleus of atom, but nuclear fission is most in employed nuclear power plants around the world whereas fusion occurs on the sun.
What are nuclear fission and fusion reactions?
Nuclear fission is a reaction in which the nucleus of large atoms are split into nuclei of two or more smaller atoms.
Nuclear fusion is a reaction in which nuclei of two or more smaller atoms are combined to give an atom of larger nucleus.
Large amounts of energy are involved in both reactions.
The Sun produces energy by nuclear fusion.
However, the most commonly employed method in nuclear power plants is nuclear fission because the necessary conditions required for nuclear fusion have not being developed currently.
Therefore, nuclear fusion and fission involve changes in the nucleus of atom, but nuclear fission is most in employed nuclear power plants around the world whereas fusion occurs on the sun.
Learn more about nuclear fusion and fission at: https://brainly.com/question/3992688
#SPJ1
What can you infer about the changes in the environment over time at the mystery fossil dig site? Record your inferences in the spaces provided.
Describe the environment in Egypt before the mystery fossil organism emerged.
the fossil informed us about the climatic and geographical changes that occurs in the environment over time.
What the mystery fossil dig site informed us about environment?We can infer about the climate and geographical changes in the environment over time at the mystery fossil dig site because the fossil provides us information about the climatic condition as well as the geography of land when this fossil organism were alive.
So we can conclude that the fossil informed us about the climatic and geographical changes that occurs in the environment over time.
Learn more about fossil here: https://brainly.com/question/11829803
#SPJ1
What happens to the cost of goods when inflation increases?
OA. The cost of goods decreases.
B. The cost of goods increases.
OC. The cost of goods stays the same.
OD. The cost of goods varies.
Answer:
The answer is B
Explanation:
Generally speaking, a company selling goods during periods of inflation will see an increase in its cost of goods sold.When inflation increases, the cost of goods increases. The correct option is B.
Generally speaking, inflation raises the price of products sold. The price of producing and purchasing those things rises together with the prices of goods and services owing to inflation.
This can be attributable to elements like escalating manufacturing costs, rising input costs, and shifting dynamics of supply and demand.
As a result, companies might need to modify their pricing plans to take inflation-related cost increases into account, the cost of goods typically increases when inflation occurs.
Thus, the correct option is B.
For more details regarding inflation, visit:
https://brainly.com/question/33537821
#SPJ6
A boy is trying to roll a bowling ball up a hill, as shown in the image below. If
friction is ignored, what is the minimum initial velocity that the ball must have
for it to reach the top of the hill? (Recall that g = 9.8 m/s²)
22.5 m
O A. 28 m/s
O B. 7 m/s
OC. 14 m/s
OD. 21 m/s
The minimum initial velocity that the ball must have for it to reach the top of the hill is 21 m/s. The correct option is D.
What is mechanical energy?The mechanical energy is the sum of kinetic energy and the potential energy of an object at any instant of time.
M.E = KE +PE
A boy is trying to roll a bowling ball up a hill. The friction is ignored. The ball must have to reach the top of the hill with a velocity. The acceleration due to gravity, g = 9.8 m/s²
The conservation of energy principle states that total mechanical energy remains conserved in all situations where there is no external force acting on the system.
M.E bottom of hill = M.E on top of hill
Kinetic energy + Potential energy = Kinetic energy + Potential energy
1/2 mu² + 0 = 0 + mgh
At the top of hill, the velocity will become zero. So, final kinetic energy is zero.
Substituting the values, we have
1/2 x u² = 9.8 x 22.5
u = sqrt [2 x9.8 x 22.5 ]
u= 21 m/s
Thus, the minimum initial velocity that the ball must have for it to reach the top of the hill is 21 m/s.
Learn more about mechanical energy.
https://brainly.com/question/13552918
#SPJ1
What is conflict resolution?
A.) committing to fair play
B.) settling a dispute or disagreement
C.) working toward a common goal
D.)trying your best to win
Answer:
B) Settling a dispute or disagreement
Explanation:
A conflict is a disagreement or argument between opposing parties.
A resolution is a solution to a problem.
Knowing both these definitions, the answer choice that makes the most sense would be B) Settling a dispute or disagreement.
Hope this helps!!
True or false: Scientific models are always built to scale, and are fully functional representations of the product they are testing.
Answer:
False
Explanation:
Scientific models are not always built to scale and may not be fully accurate
Decide whether the following statement is true (T) or false (F).
Original seat belt designs were 2-point or lap belts
1. True
or
2. False
I really hope this is true. also pay no attention to this answer I'm doing it to finish my account
Answer:
True
Explanation:
See picture.
If i apply mascara on a roller coaster, will my eyelashes fly off or get ruined?
Where are heavier elements, like iron or gold made?
*
1 point
In space, between the stars
in the black holes at the centers of galaxies
In the hearts of stars
They were made as part of the big bang
Answer:
In the hearts of stars:
Theory tells us the elements heavier than iron are created by novas
that is when a star explodes, and any heavier elements were once created when a star exploded.
Hello people ~
A current passes through a resistor. If K₁ and K₂ represent the average kinetic energy of the conduction electrons and the metal ions respectively then
(a) K₁ < K₂
(b) K₁ = K₂
(c) K₁> K₂
(d) any of these three may occur
Answer:
K1>K2
Explanation:
The main reason behind this is law of conservation of momentum
Momentum can neither be created nor endorsed.But
the factor drift velocity affects the scenario.
Drift velocities of electrons is way more than velocities of ions so
K1 is greater than K2Option C
(42)What is the speed of sound in air at a temperature of 15°C?
Answer:
340 m/s
At the temperature of 15 degrees Celsius, the velocity of sound is about 340 m/s in air.
Sound waves move the most quickly through which materiel?
A. Water
B. Iron
C. Milk
D. Air
L 6.3.2 Test (CST): Applications of Waves Question 5 of 10 Which event provides evidence that matter can reflect waves? O A. An audience member covers her ears during a loud concert. B. A laser beam bounces off a series of mirrors. C. A performer makes shadow puppets on a wall. D. The light from a fireworks show is seen miles away.
An audience member covers her ears during a loud concert shows evidence that matter can reflect waves.
Which event provides evidence that matter can reflect waves?An audience member covers her ears during a loud concert is an event that provides evidence that matter can reflect waves because a sound is heard again and again due to the reflection of waves. This repetition of sound is due to the property of reflection of sound waves.
So we can conclude that an audience member covers her ears during a loud concert shows evidence that matter can reflect waves.
Learn more about wave here: https://brainly.com/question/15663649
#SPJ1
Answer:
A laser beam bounces off a series of mirrors
Explanation:
Question 1 of 10
What is the wavelength of a wave with a frequency of 262 Hz and a speed of
343 m/s?
O A. 1.3 m
OB. 89,866 m
O C. 1.11 x 10-5 m
O D. 0.76 m
SUBMIT
Answer:
V = λ f (wavelength * frequency)
λ = V / f = 343 m/s / 262 / s = 1.3 m
Diverse crops can become vulnerable to pests, disease, and climate change. Which part of this statement is false?
The statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).
What is adaptation?Adaptation is an evolutionary process where a species fits certain environmental conditions.
Plant species are intrinsically vulnerable to climate change because they are adapted to certain climate (temperature) conditions.
In conclusion, the statement 'diverse crops can become vulnerable to pests, disease, and climate change' is considered false regarding this last point (climate change).
Learn more about adaptation here:
https://brainly.com/question/1213023
#SPJ1
To help you rank the reactivity of the three metals you will be creating atomic charge models for each of the elements. You may use the periodic table as a model to help you complete these individual models.
1. Complete the atomic charge models to show the charged substructure of sodium, magnesium and potassium.
Metals tend to readily lose electrons and form cations. Most of them react with atmospheric oxygen to form metal oxides. However, different metals have different reactivities towards oxygen (unreactive metals such as gold and platinum do not readily form oxides when exposed to air
For sodium
Nucleus =11+Core electrons=10-Valence electrons=1-For Magnesium
Nucleus=12+Core electrons=10-Valence electrons=2-For potassium
Nucleus=19+Core electrons=18-Valence electrons=1-Base your answers to questions 27 through 30 on the information below and on your knowledge of physics.
The Great Nebula in the constellation Orion consists primarily of excited hydrogen gas.
The electrons in the atoms of excited hydrogen have been raised to higher energy levels. When these atoms release energy, a frequent electron transition is from the excited n = 3 energy level to the n = 2 energy level, which gives the nebula one of its characteristic colors.
27 Determine the energy, in electronvolts, of an emitted photon when an electron transition from n=3 to n = 2
occurs.
28 Determine the energy of this emitted photon in joules.
29 Calculate the frequency of the emitted photon. [Show all work, including the equation and substitution with units.]
30 Identify the color of light associated with this photon.
27. The energy , in electronvolts, of an emitted photon when an electron transition from n=3 to n = 2 is -1.89 eV.
28. The energy of this emitted photon in joules is -3.0278 x 10⁻¹⁹ Joules.
29. The frequency of the emitted photon is 4.572 x 10¹⁴ Hz.
30. The color of light associated with this photon is Red.
What is frequency?It is the number of oscillations per second of the sinusoidal wave.
Given is the Great Nebula in the constellation Orion consists primarily of excited hydrogen gas.
The electrons in the atoms of excited hydrogen have been raised to higher energy levels. When these atoms release energy, a frequent electron transition is from the excited n = 3 energy level to the n = 2 energy level, which gives the nebula one of its characteristic colors.
27. The energy of transition between n = 3 to n = 2 is
E = R h e (1/n₁² - 1/n₂²)
where R = Rydberg constant and h = Planck's constant.
Substitute the values, we get
E = 1.0974 x 10⁻⁷ x 6.626 x 10⁻³⁴ x 1.6 x 10⁻¹⁹ (1/3² - 1 /2²)
E = -1.89 eV
28. Energy in joules can be obtained by multiplying 1.6 x 10⁻¹⁹ . So we have
E = -1.89 eV x 1.6 x 10⁻¹⁹ J/eV
E = -3.0278 x 10⁻¹⁹ Joules
29. Wavelength associated with the photon emitted is
1/λ = R (1/n₂² - 1/n₁² )
Substitute the values, we get
1/ λ = 1.524 x 10⁶ /m
The frequency is related to the wavelength as
f = c/λ where c = speed of light
f = 3 x 10⁸ x 1.524 x 10⁶
f = 4.572 x 10¹⁴ Hz
30. The color of light associated with the photon of calculated frequency is Red.
Learn more about frequency.
https://brainly.com/question/13758580
#SPJ1
Calculate the power of a person that does 8kJ of work in 4 hours
Answer:
0.56 Watt
Explanation:
Work done = 8 kJ = 8000J
Time = 4 hours = 4*60*60s = 14400sec
Power = ?
Formula of Power is,
Power = Work done / Time
Power = 8000/14400
Power = 0.56 Watt
Hence, Power of person is 0.56Watt.
On a hot day, the deck of a small ship reaches a temperature of 48
17.0°C seawater on the deck to cool it down. During the cooling, 3,710,000 J are transferred to the
seawater from the deck. Assume no energy or mass is lost from the system. Use c = 3,930 J/kg°C for
seawater.
Calculate the final temperature of the seawater-deck system.
Write your answer rounding to the nearest tenth.
The final temperature of the seawater-deck system is 990°C.
What is heat?The increment in temperature adds up the thermal energy into the object. This energy is Heat energy.
The deck of a small ship reaches a temperature Ti= 48.17°C seawater on the deck to cool it down. During the cooling, heat Q =3,710,000 J are transferred to the seawater from the deck. Specific heat of seawater= 3,930 J/kg°C.
Suppose for 1 kg of sea water, the heat transferred from the system is given by
3,710,000 = 1 x 3,930 x (T - 48.17)
T = 990°C to the nearest tenth.
The final temperature of the seawater-deck system is 990°C.
Learn more about heat.
https://brainly.com/question/13860901
#SPJ1
17.
_______ energy is energy that is stored or waiting to be used.
Mechanical
Kinetic
Electrical
Potential
Which optical device can focus light to a point through reflection?
Answer:
A
Explanation:
did the quiz
Answer:
A
Explanation:
Planetary Nebula/White Dwarf Stars - Little Ghost Nebula. Some red giant stars develop into planetary nebulas as their cores continue to contract, to increase in temperature, and to burn and vent the remaining gases into interstellar space. Eventually, the core collapses to the point where it is hot enough to ionize the vented gases, forming a relatively short-lived (~10,000-20,000 years) planetary nebula. The remaining core collapses into a white dwarf star. The vented materials from the planetary nebula play an important role in enriching the universe in elements with atomic weights less than 26 (forming the basis for carbon-based life like ourselves!). Which type of star will form a planetary nebula
Smaller stars, like our sun, die by ejecting their outer layers of gas into space, resulting in the formation of a planetary nebula.
How planetary nebula formed?A planetary nebula is formed when a red giant ejects its outer atmosphere. A white dwarf is the carbon core of a star that has lost its photosphere.
This results in a one-of-a-kind and breathtaking creation known as a planetary nebula.
Smaller stars, like our sun, die by ejecting their outer layers of gas into space over a 10,000-year period, leaving behind the star's heated core.
Radiation from the white dwarf causes the gas to shine, resulting in a one-of-a-kind and stunning creation known as a planetary nebula.
The carbon core of a red giant that has evacuated its photosphere as a planetary nebula is a white dwarf.
Hence, Smaller stars, like our sun, die by ejecting their outer layers of gas into space type of star will form a planetary nebula
To learn more about the planetary nebula refer to:
https://brainly.com/question/1162533
#SPJ1
A roller coaster car moving at a velocity of 30 meters/second has a momentum of 2.5 × 104 kilogram meters/second. what is its mass? a. 85 kilograms b. 8.3 × 102 kilograms c. 7.6 × 102kilograms d. 7.6 × 103 kilograms e. 7.6 × 104 kilograms
The mass of a rollercoaster car moving at a velocity of 30 meters/second and has a momentum of 2.5 × 104 kilogram meters/second is 8.3 × 10²kg.
How to calculate mass?The mass of the roller coaster car can be calculated using the following formula:
P = m × v
Where;
P = momentumm = massv = velocitym = 2.5 × 10⁴ ÷ 30
m = 8.3 × 10²kg
Therefore, the mass of a rollercoaster car moving at a velocity of 30 meters/second and has a momentum of 2.5 × 104 kilogram meters/second is 8.3 × 10²kg.
Learn more about mass at: https://brainly.com/question/19694949
#SPJ1
Calculate the power of a person that does 8kJ of work in 4 hours
[tex]\text{Power,}~ P = \dfrac{\text{Work done}}{\text{Time}}\\\\\\~~~~~~~~~~~~~=\dfrac{8 \times 1000~J}{4 \times 3600~ s}\\\\\\~~~~~~~~~~~~~~=\dfrac{80}{144}\\\\\\~~~~~~~~~~~~~~=0.56~ W[/tex]
Answer:
Explanation:
Energy used is power multiplied by time.
Power is energy used divided by time
8 kj is 8000 j
4 hours is 240 minutes
240 minutes is 14400 seconds
8000j divided by 14400 is 0.55 recurring, measured in watts
a metallic surface is illuminated with light of wavelength 400 nm. if the work function for this metal is 2.4 eV. what is the maximum kinetic energy of the ejected electrons, in electron volts?
Assume that
1 eV = 1.6 * 10^-19
c = 3 * 10^8
h = 6.626 * 10^-34
I already got the answer before and I know that the max kinetic energy is 0.71 eV but when I tried to solve it again, I forgot what to do.
I tried getting the cut off wave lengths and using that combined with the wavelength provided to get the K.E max but it didn't work
The maximum kinetic energy of the ejected electrons will be 0.71 eV.
What is the kinetic energy of electrons?The kinetic energy (KE) of electrons is defined as the product of one-half of the mass of the electron to the square of the velocity at which electrons spin in orbit.
Given data;
λ(Wavelength)= 400 × 10⁻⁹ m
Φ(Work function)=2.4 eV
c(Speed of light)= 3 ×10⁸ m/sec
h(Constant) = 6.626 * 10^-34
[tex]\rm \phi = 2.4 eV = 2.4 \times 1.6 \times 10^{-19} \\\\ \rm \phi =3.84 \times 10^{-19} \ J[/tex]
The maximum kinetic energy is found as;
[tex]\rm KE= \frac{hc}{\lambda} - \phi \\\\ KE= \frac{6.64 \times 10^{-34}}{400 \times 10^{-9}} -3.84 \times 10^{-19} \\\\ KE=1.14\times 10^{-19} \ J[/tex]
Unit conversion:
1 eV = 1.6 * 10⁻¹⁹ j
1 J=1/( 1.6 * 10⁻¹⁹) ev
KE=0.71 eV
Hence, the maximum kinetic energy of the ejected electrons will be 0.71 eV.
To learn more about the kinetic energy of electrons refers to:
https://brainly.com/question/13145345
#SPJ1
When electromagnetic radiation strikes perpendicular to a flat surface
Answer:
a totally absorbing surface feels radiation pressure
Explanation:
When electromagnetic radiation strikes perpendicular to a flat surface, a totally absorbing surface feels radiation pressure