Any molecule can be represented by a formula that lists all the atoms in that molecule. Each element is represented by its atomic symbol in the Periodic Table – e.g. H for hydrogen, Ca for calcium. If more than one atom of a particular element is present, then it’s indicated by a number in subscript after the atomic symbol — for example, H2O means there are 2 atoms of hydrogen and one of oxygen.
If there is more than one of whole groups of atoms, then that’s shown with a bracket around them. For example, calcium hydroxide has one calcium (Ca) for every two hydroxides (OH), so is written as Ca(OH)2.
If a charge is present, it’s indicated in superscript, with a sign (+/-) and a number if more than one charge is present. For example, calcium ions have two positive charges so are written Ca2+.
Sometimes a formula can be written in a way that gives an indication of the structure. A chemical equation shows a reaction taking place. On the left-hand side are the reactants, the molecules that take part in the reaction. On the right-hand side are the products, the molecules that are created in the reaction. Each side must contain the same number of each kind of atom. An arrow between them indicates the direction the reaction is expected to occur:
Ca + Cl2 → CaCl2
Calcium + chlorine → Calcium chloride
If there are two or more of any molecules, that’s indicated with a number in front of the molecule:
CH4 + 2O2 → CO2 + 2H2O
One methane molecule + two oxygen molecules → one carbon dioxide molecule and two water molecules
An equation may sometimes specify which phase each molecule is in – whether it’s solid, liquid, or gas, or if it’s dissolved. This is written in brackets after the molecule – (s) for solid, (l) for liquid, (g) for gas, and (aq) for ‘aqueous’, meaning dissolved in water. For example, solid calcium carbonate reacts with carbonic acid in water to form calcium bicarbonate, which is much more soluble so becomes dissolved in water:
CaCO3 (s) + H2CO3 (aq) → Ca(HCO3)2 (aq)
Solid calcium carbonate + dissolved carbonic acid → dissolved calcium bicarbonate
All chemical reactions can actually proceed in either direction. Most of the time, one direction is expected to take place more strongly, so the arrow is written in that direction. However, many common reactions happen in both directions simultaneously, creating an equilibrium where the reactions are taking place but there is no net change in concentration from one side to the other. This is indicated with the symbol ⇌.
For example, carbonic acid in water is continually breaking down into bicarbonate and hydrogen ions – but the ions are also continually joining back together.
H2CO3 ⇌ HCO3– + H+
Carbonic acid ⇌ bicarbonate + hydrogen ions
Why are scientists using acoustic surveys to learn about rainforest diversity
Answer:
Acoustic survey data can help inform scientists about the locations of the rainforest with the highest biodiversity. ... By working with these companies, The Nature Conservancy can help inform them of where they might try to create wildlife corridors or connected habitats on their lands
Identify the limiting reactant when 2.20 g of calcium reacts with 4.5 g of chlorine gas to produce calcium chloride. Write a balanced equation before starting.
I"LL GIVE YOU 30 POINTS AND NAME YOU BRAINLIEST IF YOU ANSWER THIS FOR MEEEEE PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ ITS FOR MY STUDY GUIDE!!!!!!
Answer:
2.20*4.5=?? you have to solve the multiplication ok, or its not learning
Explanation:
20. Which of the following is the correct name for N205?
O nitrate oxide
O dinitrogen pentoxide
O nitrous oxide
O nitrogen dioxide
Answer:
B!
Explanation:
Di stnds for 2 (N2)
pent = 5 (05)
Create a visual model of an ionic substance (salt) dissolving in water and a covalent substance (sugar) dissolving in water.
Answer:
see image
Explanation:
let me know if you have any questions
Convert 4.1x10^-4 moles of carbon into atoms.
Answer:
2.5×10^20atoms
Explanation:
number of moles= number of particles/Avogadro's constant
number of particles=Avogadro's constant × number of moles
number of particles=(6.02×10^23) × (4.1×10^-4)
number of particles=2.5×10^20
When you mix water and salt you get a.
How many joules of heat are needed to raise the temperature of 30.0 g of aluminum from 22°C to 80°C, if the specific heat of aluminum is 0.90 J/g°C?
Answer: There are 1566 joules of heat needed to raise the temperature of 30.0 g of aluminum from 22°C to 80°C, if the specific heat of aluminum is 0.90 J/g°C.
Explanation:
Given: Mass = 30.0 g
Specific heat = [tex]0.90 J/g^{o}C[/tex]
[tex]T_{1} = 22^{o}C[/tex]
[tex]T_{2} = 80^{o}C[/tex]
Formula used to calculate the heat energy requires is as follows.
[tex]q = m \times C \times (T_{2} - T_{1})[/tex]
where,
q = heat energy
m = mass of substance
C = specific heat capacity of substance
[tex]T_{1}[/tex] = initial temperature
[tex]T_{2}[/tex] = final temperature
Substitute the values into above formula as follows.
[tex]q = m \times C \times (T_{2} - T_{1})\\= 30.0 g \times 0.90 J/g^{o}C \times (80 - 22)^{o}C\\= 1566 J[/tex]
Thus, we can conclude that there are 1566 joules of heat needed to raise the temperature of 30.0 g of aluminum from 22°C to 80°C, if the specific heat of aluminum is 0.90 J/g°C.
. Which of these types of electromagnetic radiation has the lowest energy?
a. Radio waves
b. Visible light
c. Gamma rays
What are the only types of metals that be magnetized?
Calculate the number of moles found in 3.045x1024 atoms of helium.
PLS HELP
Explanation:
so for this u have to use this equation where
Moles = number of particle/6.02×10^23
= 3.045 × 10^24/6.02×10^23
= 5.0581
write it to 3 S.F so 5.06 moles
why should Asus be stores only in the glass containers please answer this
Answer:
Do you mean acids?
Due to chemical reaction
Explanation:
Acids are only stored in glass containers because glass containers rarely react with any substance.They dont react with acids and prevent chemical reaction so the acids can be kept. If acids were kept in metal containers it would react .
What is the name of this hydrocarbon?
Answer:
2,3-dimetylpentane
Explanation:
.....................
which is the country to use paper currency
Answer:
the first country that uses paper currency is china
the first use of paper currency can be traced back to the year 806 AD in China where they were used as flying currency
What is an example of Chemical energy to thermal energy to electrical current?
Answer:
Coal is burned at power plant.
Explanation:
the chemical Energy is released as coal changes
have a good day
Calculate the density of the baseball. Use the formula
D= m/V
where D is the density, m is the mass, and V is the
volume.
Determine whether the density of baseball is within the
legitimate range for an official baseball.
Record your answers in Table C of your Student Guide.
What is the density of the baseball?
g/cm3
The acceptable density range of official baseballs is
between 0.70 g/cm3 and 0.80 g/cm3. Is the
questionable ball in this range of acceptable density?
Answer:
0.73 and yes
Explanation:
The answers are 0.73 and yes! <3 ^-^
what are some examples of long term environmental changes???
Answer: A long-term environmental change is... ice age, deforestation, urbanization, Earth's orbit, Sun's intensity, global Warming, radioactive waste/pollution. Extinction of species could happen to anyone of the food webs in a long term change.
Explanation:
Older stars get smaller and cooler and are called white dwarfs.
True
Answer:
si
Explanation:
trye
teen
ieksnaal
kaisksd
If 10.5 g of iron, at 25°C, absorbs 128 J of heat, what will be the final temperature of metal? (The specific heat of iron is 0.449 J g-1 °C-1)
Answer:
27.5°C = Final Temperature of the metal
Explanation:
The change in temperature using the specific heat of a material could be obtained using the formula:
Q = m*S*ΔT
Where Q is heat absorbed in Joules = 128J in the problem
m is the mass of the substance = 10.5g
S is Specific Heat of the substance = 0.449J/g°C for Iron
ΔT is change in temperature = Final T - Initial T
Replacing:
128J = 10.5g*0.449J/g°C*ΔT
2.5°C = ΔT
2.5°C = Final T - 25°C
27.5°C = Final Temperature of the metal
Una muestra de 0,830 g de MgCl2 se disuelve en 350 g de agua. Si la densidad de la disolución es 1,09 g/mL
Answer:
NMIKCORQW
J3WEFONCIONV WEJFQOMS;DX
A2 Could you remove the iron from the iron sulfide using
magnet?
Explain your answer.
how to balance _h2s+ _o2 = _h2o+ _s
Answer:
2H₂S + 1O₂ → 2H₂O + 2S
Explanation:
SOLUTION :-
Balance it by using 'hit & trial' method , and you'll get the answer :-
2H₂S + 1O₂ → 2H₂O + 2S
VERIFICATION :-
In reactant side of equation :-
Number of atoms in H = 2×2 = 4Number of atoms in S = 2×1 = 2Number of atoms in O = 1×2 = 2In product side of equation :-
Number of atoms in H = 2×2 = 4Number of atoms in O = 2×1 = 2Number of atoms in S = 2×1 = 2Number of atoms of each element is equal in both reactant & product side of equation. Hence , the equation is balanced.
How many electrons does GeH4 have
Calculate the molar solubility of aluminum hydroxide (AlOH)3) in a 0.027M solution of aluminum nitrate (Al(NO3)3). The Ksp of AlOH)3 is 2.0x10-32.
Answer:
s = 5.22x10⁻⁹ M
Explanation:
Let's write the equilibrium reaction for this compound:
Al(OH)₃ <-------> Al³⁺ + 3OH⁻ Ksp = 2x10⁻³²
To get the solubility, we need to write the equilibrium expression:
Ksp = [Al³⁺] [OH⁻]³
Al(OH)₃ does not contribute to the equilibrium expression, because is a solid compound. Now, according to this, we have the following:
Al(OH)₃ <-------> Al³⁺ + 3OH⁻
I. 0 0
E. s 3s
Replacing into the Ksp expression:
2x10⁻³² = (s) (3s)³
2x10⁻³² = s * 27s³
2x10⁻³² = 27s⁴
s = ⁴√2x10⁻³² / 27
s = 5.22x10⁻⁹ MThis would be the solubility of the compound.
Hope this helps
Which of the following is most helpful for identifying an organism using a dichotomous key?
Its average lifespan
Its sources of food
Its habitat
Its physical structures
Answer:
Its physical structure
Explanation:
Biodiversity can be altered by __________.
Select one:
All of these
a fire in the ecosystem
unexpected changes in the climate of an ecosystem
a flood in the ecosystem
The tetrahedral arrangement of bonds formed by carbon and its relevance In the interaction of biomolecules
Answer:
Due to the presence of 4 valence electrons.
Explanation:
The tetrahedral arrangement of bonds formed by carbon and its relevance In the interaction of biomolecules occurs because the carbon atom has four electrons in their outermost shell and the four hydrogens has one electron each which result is a total of eight electrons distributed in four bonding orbitals making the structure of tetrahedral and the bond angles between these carbon atoms is approximately 109.5 degree.
2A1 (s) + 3C12 (g) --> 2AlCl3 (s) (balanced)
When 72 grams of aluminum react, the actual yield is 125.5 grams, what is the percent yield?
i got a few mins left
Answer:
32.3%
Explanation:
Percent yield is defined as:
Actual yield (125.5g) / Theoretical Yield * 100
To find theoretical yield we have to find the moles of aluminium. As 2 moles of Al produce 2 moles of AlCl3, the moles of Al = Moles AlCl3.
With these moles we can find the mass assuming a 100% of yield (Theoretical Yield) as follows:
Moles Al = Moles AlCl3 (Molar mass Al = 26.98g/mol)
72g Al * (1mol / 26.98g) = 2.67 moles AlCl3
Mass AlCl3 (Molar mass: 133.34g/mol)
2.67 moles AlCl3 * (133.34g / mol) = 355.8g AlCl3
Percent Yield = 125.5g / 355.8g * 100 =
32.3% (Quick pls!! Just the answer, no links) Which scenario is an example of a scientific way of thinking?
A. A researcher reviews images of lunar eclipses taken by
professional photographers and then ranks them in order of which
are the most beautiful
B. A researcher writes to a government representative to convince
the representative to encourage public participation in eclipse
watching
C. A researcher analyzes data on the motions of the Moon and Earth
and then makes a prediction about when the next lunar eclipse will
ocour
D. A researcher reade several different articles on the beat way to
enjoy a lunar eclipse and then decides which method is beat
Explanation:
The right answer is C
Hope i could be helpful
Scientist introducing a gene to the DNA of these fish that cause the fish to glow an example of which application of biotechnology?
A. Artificial selection
B. Genetic Engineering
C. cloning
D. Artificial intelligence
Answer:
The correct answer is B
Explanation:
Genetic engineering is an example of which application of because the genes are changed to get the desired features in an organism.
What is genetic engineering?Genetic engineering is the process in which we alter the genetic makeup of an organism to produce desired characterictics in that organism.
So we can conclude that Genetic engineering is an example of which application of because the genes are changed to get the desired features in an organism.
Learn more about here Genetic engineering: https://brainly.com/question/2780091
what is the name of this molecule?
A. 2-pentyne
B. cis-2-pentene
C. 3-methylpentane
D. Pentane
As the compound has alkyne as the functional group the correct option is A.
Functional group is defined as a substituent or a group of atoms or an atom due to which chemical reactions are carried out. Each functional group will react in the same way regardless to the parent carbon chain to which it is attached.This helps in prediction of chemical reactions.
The reactivity of functional group is increased by making modifications in the functional group .Atoms that are present in functional groups are linked to each other by means of covalent bonds.They are named along with the organic compounds according to IUPAC nomenclature.
As the compound has alkyne as the functional group the correct option is A.
Learn more about functional group,here:
https://brainly.com/question/33836452
#SPJ4