Answer: it’s actually umbrella
Explanation: because
A light pointer is stuck to the rubber sheet so that it pivots about a point P near the
rim of the glass, as shown (enlarged) below.
This arrangement acts as a simple thermometer.
State two disadvantages of such a thermometer.
What is the direction of a vector that has the following components: x = -44 m y = -59 m
The direction of a vector that has the following components is 233°.
What is direction of a vector?
The direction of a vector is where its endpoint points. However, when at least one of the characteristics mentioned above is different, we say that the vectors are different.
In this case, this calculus will be:
[tex]tan\theta= \frac{59}{44} \\\theta= tan^{-1}(\frac{59}{44})\\ \theta= 233\°[/tex]
See more about vectors at brainly.com/question/13322477
#SPJ1
The vector with components x = -44 m and y = -59 m has a direction of approximately 52.16 degrees counterclockwise from the positive x-axis.
The direction of a vector with components x = -44 m and y = -59 m can be determined using trigonometry. In this case, we have:
x-component (x) = -44 m
y-component (y) = -59 m
We can use the inverse tangent function to find the angle.
The direction angle (θ) can be calculated as:
θ = arctan(y / x)
θ = arctan((-59 m) / (-44 m))
Calculating this expression:
θ ≈ arctan(1.341)
To find the actual angle, we can use a calculator or table to determine the inverse tangent of 1.341.
θ ≈ 52.16 degrees
Therefore, the direction of the vector is approximately 52.16 degrees in the counterclockwise direction from the positive x-axis.
The vector with components x = -44 m and y = -59 m has a direction of approximately 52.16 degrees counterclockwise from the positive x-axis.
To know more about Direction, visit
brainly.com/question/30817683
#SPJ11
5.
A device known as the nMRI, or nuclear magnetic resonance imager, often called an MRI for simplicity, is used for what purpose?
A to generate electricity
B to apply lasers to precision measurements of the nucleus
C to create an image of objects inside other objects
D to measure geologic pressures deep underground in volcanically active regions
Answer:
C. to apply lasers to precision measurements of the nucleus
Explanation:
Magnetic resonance imaging (MRI) is based on the principles of nuclear magnetic resonance (NMR), a spectroscopic technique used to obtain microscopic chemical and physical information about molecules.
a waddling armadillo of mass 500kg moves at 5 m/s. how much kinetic energy does it have?
Answer:
K=6.250 J
Explanation:
m=500kg
v=m/s
Kinetic energy= ½mv²=½(500×25) J= 6.250 J
a tape is weighed and found to weigh 1.95 lb. the overall length of the 100-ft tape (end to end) is 102.00 ft. the specific weight of steel is 490 lb/ft?. what is the cross-sectional area of the tape?
The cross-sectional area of the tape is determined as 3.9 x 10⁻⁵ ft².
Volume of the tape
The volume of the tape is calculated as follows;
volume = mass/density
volume = (1.95 lb)/(490 lb/ft³)
volume = 3.98 x 10⁻³ ft³
Area of the tapeV = AL
A = V/L
A = 3.98 x 10⁻³ ft³/102 ft
A = 3.9 x 10⁻⁵ ft²
Thus, the cross-sectional area of the tape is determined as 3.9 x 10⁻⁵ ft².
Learn more about area here: https://brainly.com/question/3948796
#SPJ1
What is the net force needed to lift a full grocery sack (weighing 210 N) uniformly? What is the net force
needed to accelerate the grocery sack upward at 1.5 m/s2 ?
The net force needed to lift a full grocery sack uniformly is 32.115 N.
What is Net force?When two or more forces are acting on the system of objects, then the to attain equilibrium, net force must be zero.
Given the weight of sack W = 210N and the acceleration a = 1.5m/s².
The mass of the sack will be
m = Weight / acceleration due to gravity
m = 210 N/9.81 m/s²
m = 21.41 kg
Using Newton's second law, the net force will be
F = mass x acceleration
F= 21.41 x 1.5
F = 32.115 N
Thus, the net force is 32.115 N.
Learn more about net force.
https://brainly.com/question/18031889
#SPJ1
3. why is the sum of the maximum voltages across each element in a series r l c circuit usually greater than the maximum applied voltage? doesn't that inequality violate kirchhoff's loop rule?
The sum of the maximum voltages across each element in a series RLC circuit is usually greater than the maximum applied voltage because voltages are added by vector addition.
What is the Kichoff's loop rule?Kirchhoff's loop rule states that the algebraic sum of potential differences, as well as the voltage supplied by the voltage sources and resistances, in any loop must be equal to zero.
In a series RLCcircuit, the voltages are not added by scalar addition but by vector addition.
Kirchhoff's loop rule is not violated since the voltages across different elements in the circuit are not at their maximum values.
Therefore, the sum of the maximum voltages across each element in a series RLC circuit is usually greater than the maximum applied voltage because voltages are added by vector addition.
Learn more about Kichoff's loop rule at: https://brainly.in/question/35360816
#SPJ1
What happens to the light in a
concave lens?
a. the light diverges when it passes
through the lens.
b. the light diverges before it enters the
lens.
c. the light converges when it enters the
lens.
Answer:
a. the light diverges when it passes through the lens.
Explanation:
All the light rays after passing through the concave lens diverge and when produced backwards appear to meet at a point on the principal axis of the lens. This point is known as principal focus of a concave lens.
BRAINLIEST + 19 pts what does a capacitor do in a circuit?
A. it reduces current.
B. It increases voltage
C. It stores and releases charge.
D. it overcomes resistance
answer: c
explanation: it's job is to store and release charge
Answer:
C- It stores and releases charge
PLease help with this this is pretty hard for me i kinda get it but not fully
Explanation:
Force = mass x acceleration
F= ma (formula)
15N = o.5kg x a
Divide both sides by o.5
a = 30 (greater acceleration)
15N = 4.5kg x a
Divide both sides by 4.5
a= 3.33 (great acceleration)
15N = 0.05kg x a
Divide both sides by 0.05
a = 300 (greatest acceleration)
A 1050 w electric toaster operates on a household circuit of 120 v. what is the resistance of the wire that makes up the heating element of the toaster
The Resistance of the wire that makes up the heating element of the toaster is 13.75Ω.
What is Resistance?
Resistance is the measure of the opposition to current flow in an electrical circuit.
S.I. Unit of resistance is ohms, symbolized by the Greek letter omega (Ω)
Also from Ohm's Law,[tex]R=\frac{V}{I}[/tex]
From power-current relation
P=VI
Also, [tex]I=\frac{P}{V}[/tex]
[tex]I = \frac{1050}{120}[/tex]
I = 8.75 A
From Ohm's Law,[tex]R=\frac{V}{I}[/tex]
[tex]R = \frac{120}{8.75}[/tex]
R = 13.75 Ω
The Resistance of the wire is 13.75 Ω
For more resistance questions visit
https://brainly.com/question/14547003
#SPJ1
Which of the following is a common use of infrared light?
O remote control
Otanning lamp
Omicrowave oven
Ostreet light
remote control
Explanation:
A remote control uses light waves just beyond the visible spectrum of light—infrared light waves—to change channels on your TV.
3) A photon is emitted as the electron in a hydrogen
atom drops from the n = 5 energy level directly to
the n = 3 energy level. What is the energy of the
emitted photon?
(1) 0.85 eV
(2) 0.97 eV
(3) 1.51 eV
(4) 2.05 eV
From the information provided and the calculations, the energy of the drop is 1.51 eV
What is the Rydberg formula?The Rydberg formula is used to obtain the energy of a photon or the wavelength of a photon.
Thus;
1/λ = 1.097 * 10^7 (1/3^2 - 1/5^2)
1/λ = 1.097 * 10^7(0.11 - 0.04)
λ = 1.3 * 10^-6 m
Since;
E = hc/λ
E = 6.6 * 10^-34 * 3 * 10^8/1.3 * 10^-6
E = 1.51 * 10^-19 J or 1.51 eV
Learn more about photon:https://brainly.com/question/20912241
#SPJ1
Answer:
0.97eV
Explanation:
The energy emitted during n=5 is 0.54 eV
The energy emitted during n=3 is 1.51 eV
(This information is on the Physics Reference Table 2006 edition)
We find the change in the energy level which is:
1.51eV-0.54eV = 0.97eV
Therefore the energy emitted by the photon is 0.97eV.
A 5000kva 230/13. 8kv single phase power transformer has a resistance of 0. 38 ohms and reactance of 1. 9 ohms
The reactance of the circuit will be 5.233×10⁻⁴ ohm. Inductive reactance is the product of 2 times π frequency and the coil inductance.
What is reactance?
When alternating electricity passes through pure reactance, it causes a voltage drop that is 90 degrees out of phase with the current.
The letter “X” is used to represent reactance in mathematics, and it is measured in ohms.
The inductive reactance of a coil is calculated using the following formula:
Inductive reactance, or XL, is the product of 2 times p (pi), and the frequency of the ac current in hertz, and the coil inductance in henries.
XL= 2πfL
Where,
f {frequency)
L (Inductance)
The reactance of the circuit is found as;
[tex]\rm R_{new}=0.38[{(\frac{1}{60} )^2][/tex]
[tex]\rm R_{new}=1.055 \times 10^{-4} \ ohm[/tex]
The inductance of the circuit is;
[tex]\rm X_{new}=1.9(\frac{1}{60} )^2\\\\X_{new}= 5.233 \times 10^{-4}\ ohm[/tex]
Hence, the reactance of the circuit will be 5.233×10⁻⁴ ohm.
To learn more about the reactance, refer to the link;
https://brainly.com/question/17129912
#SPJ4
5. Calculate the volume of a cube with the following measurements.
Length= 5 cm
Height = 10 cm
Width = 16 cm
O 31 cubic cm
50 cubic cm
O 800 cubic cm
O400 cubic cm
Estimate how long a 2500 W electric kettle would take to boil away 1.5 Kg of water . The specific latent heat of vaporization of water is 4000000 J / Kg .
The time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds
How to calculate the timeUse the formula:
Power × time = mass × specific heat
Given mass = 1. 5kg
Specific latent heat of vaporization = 4000000 J/ Kg
Power = 2500 W
Substitute the values into the formula
Power × time = mass × specific heat
2500 × time = 1. 5 × 4000000
Make 'time' the subject
time = 1. 5 × 4000000 ÷ 2500 = 6000000 ÷ 2500 = 2400 seconds
Therefore, the time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds.
Learn more about specific latent heat of vaporization:
https://brainly.in/question/1580957
#SPJ1
According to the graph of displacement vs. time, what is the object's velocity at a displacement of 0.2 meters?
According to the graph of displacement vs. time, the object's velocity is 0.02 m/s
What is displacement?The displacement is the shortest distance travelled by the particle. It is the vector quantity which re[presents both the magnitude and direction.
Velocity is the time rate of change of displacement with time.
Given is the displacement 0.2 m and time taken is 10s. So, the velocity is
v = 0.2/10
v = 0.02 m/s
Thus, the object's velocity is 0.02 m/s
Learn more about displacement.
https://brainly.com/question/11934397
#SPJ1
A metal sign for a car dealership is a thin, uniform right triangle with base length b and height h. the sign has mass m.
required:
a. what is the moment of inertia of the sign for rotation about the side of length h?
b. if m = 4.40 kg ,b = 1.30 m and h = 1.30 m , what is the kinetic energy of the sign when it is rotating about an axis along the 1.30-m side at 2.40 rev/s ?
(a) The moment of inertia of the sign for rotation about the side of length h is 1.24 kgm².
(b) The kinetic energy of the sign when it is rotating about an axis is 141.37 J.
Moment of inertia of the triangular sign
The moment of inertia of the sign for rotation about the side of length h is calculated as follows;
I = 2 x ¹/₃M(b/2)²
I = 2 x ¹/₃Mb² x ¹/₄
I = ¹/₆Mb²
I = ¹/₆ x 4.4 x 1.3²
I = 1.24 kgm²
Rotational kinetic energy of the ballK.E(rot) = ¹/₂Iω²
where;
ω is angular speed = 2.4 rev/s = 2.4 x (2π rad)/s = 15.1 rad/sK.E(rot) = ¹/₂(1.24)(15.1)²
K.E(rot) = 141.37 J
Learn more about rotational kinetic energy here: https://brainly.com/question/25803184
#SPJ1
How far must a 2.0-cm-diameter piston be pushed down into one cylinder of a hydraulic lift to raise an 9-cm-diameter piston by 30 cm
The distance the 2.0-cm-diameter piston must be pushed down to raise 9 cm diameter is 607.5 cm.
Distance the piston must be pushed down
The distance the piston must be pushed down is calculated as follows;
A₁d₁ = A₂d₂
πr₁²d₁ = πr₂²d₂
r₁²d₁ = r₂²d₂
(1)²(d₁) = (4.5)²30
d₁ = 607.5 cm
Thus, the distance the 2.0-cm-diameter piston must be pushed down to raise 9 cm diameter is 607.5 cm.
Learn more about piston here: https://brainly.com/question/25870707
#SPJ1
if line segment g f = 3.2 ft, which is a possible measure of line segment t s? 1.6 ft 3.0 ft 3.2 ft 4.0 ft\
By applying the relationship of side lengths to interior angles in a triangle, a possible measure of line segment TS is 4.0 ft.
The relationship of sides to interior angles in a triangle.In Geometry, the relationship of side lengths to interior angles in a triangle include the following:
The shortest side length is always opposite of the smallest interior angle.The longest side length is always opposite of the largest interior angle.Based on the above theory, we can logically deduce that angle GF < TS or TS > GF because 42° is greater than 56°.
TS > 3.2 ft.
Therefore, a possible measure of line segment TS is 4.0 ft.
Read more on interior angle here: https://brainly.com/question/14379552
#SPJ1
Complete Question:
In the triangles, TR = GE and SR = FE. If Line segment G F = 3.2 ft, which is a possible measure of Line segment TS? 1.6 ft 3.0 ft 3.2 ft 4.0 ft.
it is a routine composed of yells and cheers gymnastic skill and dance
Cheer dance is a routine composed of yells and cheers gymnastic skill and dance.
What is cheer dance?Cheer dance or cheerleading is a group activity used to entertain fans at athletic events and inspire louder, more enthusiastic cheering. It combines dancing and acrobatic aspects with shouted phrases.
A never-ending range of diverse stunts, jumps, pyramids, dances, and chants that integrate a variety of different movements can be included in the immensely complex sport of cheerleading. Base, partner, and spotter are the three primary cheerleading roles. These roles are all a part of cheerleading stunts, which pose the greatest risk of harm to participants.
It is a competitive sport and leisure activity made up of a set routine with necessary performance components, much like in gymnastics and dance. Additionally, it hopes to get the crowds to cheer in team sports event.
Learn more about cheer dance, refer the link:
https://brainly.com/question/29788167
#SPJ2
Your question is incomplete, but most probably your full question was:
1. It is a routine composed of yells and cheers, gymnastic skills and dance.
A. Contemporary dance
B. Hip-hop dance
C. Street dance
D. Cheer dance
What is the focal length of a lens? what is the focal point?.
Answer:
The focal length of a lens is the distance from the lens to the focal point.
For a convex lens the focal point is that point at which parallel rays will be focused after passing thru the lens.
Note: For a concave lens the rays will diverge after passing thru the lens and will appear to come from a point on the same side of the lens from which the parallel rays strike the lens,
An electromagnetic wave has a wavelength of 10 nm. Calculate its frequency and identify to which part of the electromagnetic spectrum the wave belongs.
The frequency of an electromagnetic wave with wavelength of 10nm will be 3 × 10∧7 Hz and would belong to the X-ray or ultraviolet part of the electromagnetic spectrum due to its wavelength
What is frequency?
Frequency is defined as the number of oscillations of a wave per unit time and is measured in hertz(Hz).
It is also inversely proportional to the wavelength.
How to calculate the frequency
The frequency of an electromagnetic wave can be calculated using the formula;
frequency = velocity of light divided by the wavelength
f = v ÷ λ
Note that the velocity of light = 3 × 10 ∧8 m/s
Wavelength = 10nm
Frequency, f = 3 × 10∧8 ÷ 10 = 3 × 10∧7 Hz
Hence, the frequency of an electromagnetic wave with wavelength of 10nm will be 3 × 10∧7 Hz and would belong to the X-ray or ultraviolet part of the electromagnetic spectrum due to its wavelength.
Learn more about electromagnetic spectrum here:
https://brainly.com/question/13803241
#SPJ1
Which quantity is a vector quantity?
A.
displacement
B.
distance
C.
mass
D.
temperature
E.
volume
Answer:
Displacement...
Explanation:
Displacement is a vector quantity as it have both magnitude and direction...
[tex]...[/tex]
a. displacement is the correct answer
Displacement is a vector quantity
EXPLANATIONDisplacement is a vector quantity because it has both magnitude and direction.
Three objects have velocities that vary with time
#21
initial velocity=u=5m/sTime=t=2sAcceleration=a=1.3m/s²According to first equation of kinematics
v=u+atv=5+1.3(2)v=5+2.6v=7.6m/s#22
#a
v1=2+3(3)=2+9=11m/sv2=-8-4(3)=-20m/sv3=1-5(3)=-14m/sThe order is
v2<V3<v1#b
for speed find absolute velocity
S1=|11|=11m/sS2=|-20|=20m/sS3=|-14|=14m/sSo order is
S1<S3<S2
Answer:
See below ~
Explanation:
Question 21 :
⇒ v = u + at
⇒ v = 5 + 1.3 (2)
⇒ v = 5 + 2.6
⇒ v = 7.6 m/s
=============================================================
Question 22 : At t = 3
Subpart (a)
⇒ Object 1 : v = 2 + 3(3) = 11 m/s
⇒ Object 2 : v = -8 - 4(3) = -20 m/s
⇒ Object 3 : v = 1 - 5(3) = -14 m/s
⇒ Hence, their velocities are in the order : Object 2 < Object 3 < Object 1
Subpart (b)
⇒ Object 1 : v = | 2 + 3(3) | = 11 m/s
⇒ Object 2 : v = | -8 - 4(3) | = 20 m/s
⇒ Object 3 : v = | 1 - 5(3) | = 14 m/s
⇒ Hence, their speeds are in the order : Object 1 < Object 3 < Object 2
Can you have curly hair even though your hair is short and soft? (Women)
Cool air tends to...
A. Be less dense and flow over warm air.
B. Be lifted up by more dense warm air.
C. Be more dense and flow under warm air.
D. Mix easily with warm air masses.
Answer: C. Be more dense and flow under warm air.
Explanation:
think of a supermarket selling dairy products and when you open the fridge to get the milk, outside the supermarket is hot and inside the fridge is cold ice.
Why can we see the moon at
night?
a. the moon is luminous and produces its own
light.
b. light from the earth is reflected back to us off
of the moon.
c. light from the sun is reflected back to us off
the moon
d. light from the sun is absorbed by the moon.
Answer:
c. light from the sun is reflected back to us off the moon
Explanation:
the moon does not produce its own light
After travelling 4.0 km, the train reaches its maximum speed. it continues at this constant speed on the next section of the track where the track follows a curve which is part of a circle.
state the direction of the resultant force on the train as it follows the curved path.
Answer:
toward the center of the circular curve
Explanation:
An object will follow a circular path at constant speed if and only if its net acceleration is constant and directed toward the center of the curved path.
__
The result force is directed toward the center of the circle.
_____
Additional comment
If any part of the result force is in the direction of motion, the speed will not be constant. If the center-directed force is not constant, the path will not be circular.
If a lever has an input arm of 80 cm and an output arm of 20 cm, what is its ideal mechanical advantage?
Answer:
16
Explanation: