If two speeds are in exact opposite directions, the combined speed is the difference in the speeds.

A. True
B. False

Answer:

I would say d I had the same question yesterday and I got it correct so hope that helps

102 m

Explanation:

The time 0.6 sec is the time it took for the sound to travel from the bat to the moth and back. So it took 0.3 sec for the sound to reach the moth. From the definition of speed, the distance of the moth d to the bat is given by

v = d/t ---> d = vt = (340 m/s)(0.3 sec) = 102 m

Answer:

The tension in string will be "3.62 N".

Explanation:

The given values are:

Length of string:

l = 3 ft

or,

 = 0.9144 m

frequency,

f = 60 Hz

Weight,

= 0.096 lb

or,

= 0.0435 kgm/s²

Now,

The mass will be:

= [tex]\frac{0.0435}{9.8}[/tex]

= [tex]0.0044 \ kg[/tex]

As we know,

⇒  [tex]\lambda=\frac{2L}{n}[/tex]

On substituting the values, we get

⇒     [tex]=\frac{2\times 0.9144}{4}[/tex]

⇒     [tex]=0.4572 \ m[/tex]

or,

⇒  [tex]v=f \lambda[/tex]

⇒      [tex]=0.4572\times 60[/tex]

⇒      [tex]=27.432 \ m/s[/tex]

Now,

⇒  [tex]v=\sqrt{\frac{T}{\mu} }[/tex]

or,

⇒  [tex]T=\frac{m}{l}\times v^2[/tex]

On putting the above given values, we get

⇒      [tex]=\frac{0.0044}{0.9144}\times (27.432)^2[/tex]

⇒      [tex]=\frac{752.51\times 0.0044}{0.9144}[/tex]

⇒      [tex]=3.62 \ N[/tex]

2 bar magnets top to bottom with their long axes vertical, the top one with red S on top and blue N on bottom and the bottom magnet with red S on top and blue N on bottom. this diagram shows magnets that will attract each other. Hence option D is correct.

A permanent magnet is an item constructed of magnetised material that generates its own persistent magnetic field. A refrigerator magnet, for example, is commonly used to hold notes on a refrigerator door. Ferromagnetic (or ferrimagnetic) materials are those that can be magnetised and are strongly attracted to a magnet. These include the elements iron, nickel, and cobalt, as well as their alloys, some rare-earth metal alloys, and naturally occurring minerals such as lodestone. Although ferromagnetic (and ferrimagnetic) materials are the only ones that are strongly attracted to a magnet and are widely thought to be magnetic, all other substances respond weakly to a magnetic field via one of many different forms of magnetism.

Hence option D is correct.

To know more about magnet :

https://brainly.com/question/21974887

#SPJ3.

Answer:

it is d, just did the quiz. all this came from the amazing com mentor who said a was wrong and it is d, thank you.

Explanation:

This splitting of the big atomic nucleus into smaller nuclei is known as nuclear fission, and further discussion is as follows:

The neutron collides with a uranium atom that splits during the fission of nuclear, producing a tremendous quantity of energy in the form of heat produced. If a uranium atom splits, additional neutrons are extricated.

Therefore, the final answer is "Option D".

Find out more about the nuclear fission here:

brainly.com/question/913303

Answer:

Percentage:

Rr = 50% because it's 2/4 (for both or 25% each since you have them separate)

rr = also 50%, because it's also 2/4.

Phenotype:

Rr = heterozygous

rr = "hozygous" recessive

In addition, RR is "hozygous" dominant

Explanation:

They said the hozygous is a swearword LOL.

Answer:

θ₁ = 0.5 revolution

Explanation:

We will use the conservation of angular momentum as follows:

[tex]L_1=L_2\\I_1\omega_1=I_2\omega_2[/tex]

where,

I₁ = initial moment of inertia = 18 kg.m²

I₂ = Final moment of inertia = 3.6 kg.m²

ω₁ = initial angular velocity = ?

ω₂ = Final Angular velocity = [tex]\frac{\theta_2}{t_2} = \frac{2\ rev}{1.2\ s}[/tex] = 1.67 rev/s

Therefore,

[tex](18\ kg.m^2)\omega_1 = (3.6\ kg.m^2)(1.67\ rev/s)\\\\\omega_1 = \frac{(3.6\ kg.m^2)(1.67\ rev/s)}{(18\ kg.m^2)}\\\\\omega_1 = \frac{\theta_1}{t_1} = 0.333\ rev/s\\\\\theta_1 = (0.333\ rev/s)t_1[/tex]

where,

θ₁ = revolutions if she had not tucked at all = ?

t₁ = time = 1.5 s

Therefore,

[tex]\theta_1 = (0.333\ rev/s)(1.5\ s)\\[/tex]

θ₁ = 0.5 revolution

Answer:

The work done by you on the two cart system is 2 N-m

Explanation:

Work done is the product of force and displacement.

W = F * D

Substituting the given values we get -

W =

[tex]4 * (0.17+0.33)\\= 2[/tex]

The work done by you on the two cart system is 2 N-m

Answer:

Material that allow the electrons to move freely in order to produce a current

Please mark as brainliest if answer is right

Have a great day, be safe and healthy  

Thank u  

XD  

Answer: [tex]7.96\ \mu C[/tex]

Explanation:

Given

The dimension of the plate is [tex]1\ cm\times 6\ cm[/tex]

The gap between the plate is [tex]0.001\ cm[/tex]

Voltage applied [tex]V=15,000\ V[/tex]

The capacitance of the capacitor is

[tex]C=\dfrac{\epsilon_o A}{d}\\\\C=\dfrac{8.85\times 10^{-12}\times 1\times 6\times 10^{-4}}{10^{-5}}\\\\C=53.1\times 10^{-11}\ F[/tex]

Charge acquired by the capacitor

[tex]\Rightarrow Q=CV\\\Rightarrow Q=53.1\times 10^{-11}\times 15,000\\\Rightarrow Q=796.5\times 10^{-8}\\\Rightarrow Q=7.96\times 10^{-6}\ C[/tex]

Answer:

Frequency = 1,550Hz

Explanation:

To solve this we can use the equation: [tex]f=\frac{v}{\lambda}[/tex]

(frequency = velocity/wavelength).

We are given the information that the wavelength is 22cm and the speed is 340m/s. The first step is to make sure everything is in the correct units (SI units), and to convert them if needed. The SI Units for velocity and wavelength are m/s and m respectively. This means we need to convert 22cm into meters, which we can do by dividing by 100, (as there are 100cm in a meter). 22/100 = 0.22m

Now we can substitute these values into the formula and calculate to solve:

[tex]f=\frac{340}{0.22} \\\\f=1545.454...[/tex]

Simplify to 3 significant figures:

f = 1,550Hz

(Which I believe is just below a G6 if you were interested)

Hope this helped!

Answer:

A.

Explanation:

A po sa tingin ko

sana po makatulong

Answer:

The answer is A

Explanation:

An insulator doesn't have to be a metal

<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3

Answer:

a substance which does not readily allow the passage of heat or sound.

<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3<3

Answer:

0.5 m/s

Explanation:

acceleration= force times mass

Given the amount of force applied on the sled as well as its mass, the acceleration of the sled is 0.5m/s².

A force is simply referred to as either a push or pull of an object resulting from the object's interaction with another object.

From Newton's Second Law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration

Given the data in the question;

F = m × a

10kgm/s² = 20kg × a

a = 10kgm/s² ÷ 20kg

a = 0.5m/s²

Given the amount of force applied on the sled as well as its mass, the acceleration of the sled is 0.5m/s².

Learn more about force here: brainly.com/question/27196358

#SPJ2

Answer: 5

Explanation: B is for sure 60°, c* cosB = 10*1/2 =5

Pedro needs to control the variables such as volume of water and temperature during his experiment. So, option C.

The amount of water vapor in the air is known as humidity. The humidity will be high if there is a lot of water vapour in the atmosphere.

Water can evaporate even at very low temperatures, but as the temperature rises, the rate of evaporation increases.

More surface molecules per unit of volume may be able to escape from a substance with a larger surface area, so it will evaporate more quickly.

The control variables in an experiment are the variables that the experimenter intends to keep constant always so as to limit their effect on the measurements of the relationship between the dependent and the independent variable.

Therefore, in order to have a proper measurement of the effect of humidity on evaporation rate, other variables such as temperature, and the volume of the water in the experiment investigations which affect evaporation rate by the provision of heat, (temperature) and their heat capacity, the volume, etc. should be controlled.

Hence,

Pedro needs to control the variables such as volume of water and temperature during his experiment. So, option C.

To learn more about humidity, click:

https://brainly.com/question/22069910

#SPJ7

Answer:

6.8 N.m

Explanation:

The computation of the magnitude of the magnetic torque on the coil is given below:

Given that

n = 400

d =  6.0 cm

Current  is I = 7.0 A

Angle is [tex]\theta[/tex] = 30 degree

Now

We know that

the magnitude of the magnetic torque is

= nIABsin[tex]\theta[/tex]

= (400) (7.0) π ÷ 4 (0.06m)^2 sin(90° - 30°)

As

[tex]\theta[/tex] = (90° - Ф)

=  (400) (7.0) π ÷ 4 (0.06m)^2 sin 60°

= 6.8 N.m

Answer:

[tex]56.5\ \text{s}[/tex]

[tex]21.13\ \text{m/s}[/tex]

Explanation:

v = Final velocity

u = Initial velocity

a = Acceleration

t = Time

s = Displacement

Here the kinematic equations of motion are used

[tex]v=u+at\\\Rightarrow t=\dfrac{v-u}{a}\\\Rightarrow t=\dfrac{25-0}{2}\\\Rightarrow t=12.5\ \text{s}[/tex]

Time the car is at constant velocity is 39 s

Time the car is decelerating is 5 s

Total time the car is in motion is [tex]12.5+39+5=56.5\ \text{s}[/tex]

Distance traveled

[tex]v^2-u^2=2as\\\Rightarrow s=\dfrac{v^2-u^2}{2a}\\\Rightarrow s=\dfrac{25^2-0}{2\times 2}\\\Rightarrow s=156.25\ \text{m}[/tex]

[tex]s=vt\\\Rightarrow s=25\times 39\\\Rightarrow s=975\ \text{m}[/tex]

[tex]v=u+at\\\Rightarrow a=\dfrac{v-u}{t}\\\Rightarrow a=\dfrac{0-25}{5}\\\Rightarrow a=-5\ \text{m/s}^2[/tex]

[tex]s=\dfrac{v^2-u^2}{2a}\\\Rightarrow s=\dfrac{0-25^2}{2\times -5}\\\Rightarrow s=62.5\ \text{m}[/tex]

The total displacement of the car is [tex]156.25+975+62.5=1193.75\ \text{m}[/tex]

Average velocity is given by

[tex]\dfrac{\text{Total displacement}}{\text{Total time}}=\dfrac{1193.75}{56.5}=21.13\ \text{m/s}[/tex]

The average velocity of the car is [tex]21.13\ \text{m/s}[/tex].

Answer:

ΔT = 4.058 10²⁰ [tex]\frac{S_o^2}{r^2 \ c_e}[/tex]

Explanation:

In this experiment the system can be approximated as a tube with one end open and the other closed.

The open end is where the ultrasound emitter is and the closed end where the limit between the tissue and the bone is, the length of the tube is L = 0.55 cm = 5.5 10⁻³ m

a node is formed at the closed end and a belly at the open end, so the resonance has the form

             λ = 4L                    1st harmonic

             λ = 4/3 L                third harmonic

             λ = 4/5 L                fifth harmonic

             λ = 4L / (2n + 1)     n = 0, 1, 2, (2n + 1)

This wave is a standing wave therefore energy density remains in place

                P = 1/2 ρ v (w S₀)²

angular velocity is related to frequency

               w = 2π f

we substitute

                E = P = 2π² ρ v f² S₀²

if this energy per unit area is transformed into heat

                E = m c_e DT

let's use the concept of density

                ρ = m / V

                m = ρ V

if there are no losses in the system

       ½ π² ρ v f² S₀² = ρ V c_e ΔT

       ΔT = [tex]\frac{\pi ^2 \ v \f^2 S_o^2}{2V \ c_e}[/tex]

When analyzing this expression the temperature increase is

* quadratic at the frequency and maximum amplitude of the wave

* proportional to the speed of the wave in the tissue

* inversely proportional to tissue volume

we can approximate the volume of the tissue to the volume of a cylinder tube

            V = π r² L

           ΔT = [tex]\frac{\pi \ v \ f^2 S_o^2 }{r^2 \ L \ c_e}[/tex]

we calculate

            ΔT = π 1450 (0.7 10⁶)² S₀² /( r² 5.5 10-3 c_e)

            ΔT = 4.058 10²⁰ [tex]\frac{S_o^2}{r^2 \ c_e}[/tex]

Answer:

this pattern to occur there must be coherence in the light beams.

you use a flashlight, the rays are incoherent so diffraction patterns cannot occur.

Explanation:

The point pattern that appears in the wall is the result of the interference and diffraction processes through each space of the mesh, for this pattern to occur there must be coherence in the light beams.

The coherence process is that all the rays have the same constant and phase, before the appearance of the lasers, the light is stopped by a small opening and this ray is the one that passes through the slits, with the appearance of the laser this it is consistent from its production process, so opening is not necessary, with this there is much greater intensity and the measurement process is simplified.

When you use a flashlight, the rays are incoherent so diffraction patterns cannot occur.

Polarization has no effect on diffraction patterns so it does not matter if it is vertical or horizontal.

Answer:

Fc = 123 Newton

Explanation:

Net force can be defined as the vector sum of all the forces acting on a body or an object i.e the sum of all forces acting simultaneously on a body or an object.

Mathematically, net force is given by the formula;

[tex] Fnet = Fapp + Fg[/tex]

Where;

Fnet is the net force.

Fapp is the applied force.

Fg is the force due to gravitation.

Given the following data;

Normal force = 25N

Mass = 10kg

To find the centripetal force;

From the net force, we have the following formula;

Fc = N + mg

Where;

Fc is the centripetal force.

N is the normal force.

mg is the the weight of the object.

Substituting into the formula, we have;

Fc = 25 + 10(9.8)

Fc = 25 + 98

Fc = 123 Newton

Answer:

.0000004

Explanation:

The mass of a brick with a volume of 0.0006 m³ and a density of 1600 kg/m³ is 0.96kg.

The mass of a substance can be calculated by multiplying the density of the substance by its volume. That is;

Mass = density × volume

According to this question, the density of brick is 1,600 kg/m3 and it has a volume of 0.0006m³. The mass is calculated as follows:

Mass = 0.0006 × 1600

Mass = 0.96kg

Therefore, the mass of a brick with a volume of 0.0006m³ and a density of 1600 kg/m³ is 0.96kg.

Learn more about mass at: https://brainly.com/question/19694949

[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]

Giants.

Explanation:

giants are those stars that are not so hot but give a lot of light