Answer:
56.52 units
Explanation:
hope that helps :)
12. A. 2 g of ferrous sulphate crystals 5 points
are heated in a dry boiling tube. a)
Name and define the type of reaction
that has taken place. b) Write
balanced chemical equation for the
above reaction. c) List two main
observations of this reaction. B. A
shining metal 'M'on burning gives a
dazzling white flame and changes to
a white powder ‘N’. a) Identify ‘M'and
'N'. b) Name the type of reaction
taking place and write the balanced
chemical equation.
Answer:
A) Decomposition reaction.
Decomposition reaction is defined as a chemical reaction whereby a compound is broken down into 2 or more simpler substances.
B) 2FeSO4 + Heat > Fe2O3 + SO2 + SO3
C) - Gas evolution because a gas is part of the product
- Upon heating its colour gradually changes from pale green to reddish brown which implies a change in state
Explanation:
A) Name of the reaction is; Decomposition reaction.
Decomposition reaction is defined as a chemical reaction whereby a compound is broken down into 2 or more simpler substances.
B) The balanced chemical equation is;
2FeSO4 + Heat > Fe2O3 + SO2 + SO3
C) From experience, the 2 main observations of this reaction are;
- Gas evolution because a gas is part of the product
- Upon heating its colour gradually changes from pale green to reddish brown which implies a change in state.
En una botella hay 2x10 25 moléculas de vinagre puro ¿Cuántos mol y cuántos gramos de esta sustancia habrá en la botella?
Answer:
33.2 moles y 1994 gramos.
Explanation:
¡Hola!
En este caso, dado que es posible para nosotros relacionar moles con gramos por medio de la masa molar y moléculas con moles por medio del número de Avogadro, resulta factible para nosotros primero calcular las moles en las moléculas dadas y de esta manera luego calcular los gramos, teniendo en cuenta una masa molar de 60.05 g/mol ya que el vinagre se puede estudiar como ácido acético (CH3COOH):
[tex]2x10^{23}molec*\frac{1mol}{6.022x10^{23}molec}=33.2mol[/tex]
Seguidamente, calculamos los gramos:
[tex]33.2mol*\frac{60.05g}{1mol}=1994g[/tex]
¡Saludos!
2 H2(g) + O2 (g) --> 2 H20 (1)
How many moles of hydrogen gas do you need to make 2 moles of liquid water?
Answer:
4moles of hydrogen atoms
Explanation:
The second conversion factor reflects the number of atoms contained within each molecule. Two water molecules contain 4 hydrogen atoms and 2 oxygen atoms. A mole of water molecules contains 2 moles of hydrogen atoms and 1 mole of oxygen atoms.
(reporting links) brainly
Amebic dysentery is a disease caused by organisms that live in dirty water. Which is most likely to prevent an epidemic of amebic dysentery?
A. vaccination of the population
B. purification of drinking water
C.public education on the importance of washing hands
D.restriction on travel to places with amebic dysentery
Answer:
The answer would have to be public education on the importance of washing hands.
Explanation: Washing hands is always one of the best ways to prevent a contagious disease.
Describe the process used to dilute a stock solution?
Answer:
Heyaa!! I'm *✧･ﾟ:*Pinky!! *:･✧ And i'm here to inform you that you're answer is...
Explanation:
✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:✧*:✧✧･ﾟ:*✧･ﾟ:*✧･ﾟ:
*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:✧*:✧*:･ﾟ･ﾟ
*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧ !!!!! Answer: add more solvent to decrease the concentration. A stock solution is a concentrated form of a particular chemical. To make a solution from the stock solution, a required amount of the stock solution has to be taken out and this will be diluted with pre-calculated amount of the correct solvent !!!! *:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧
✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:✧*:✧✧･ﾟ:*✧･ﾟ:*✧･ﾟ:
*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:･ﾟ✧*:･ﾟ*:･ﾟ✧✧･ﾟ: *✧･ﾟ:**:✧*:✧*:･ﾟ･ﾟ
Have An Amazingly Good Day!!
~Pinky~
If a system is left to change spontaneously, in what state will it end?
A. The state with the lowest possible energy consistent with the state of maximum disorder
B. the state with lowest possible energy
C. The same state in which it began
D. The state with the maximum disorder
Answer:
The state with the lowest possible energy consistent with the state of maximum disorder
so letter A
If a system is left to change spontaneously then, the state with the lowest possible energy is consistent with the state of maximum disorder. option A is correct.
what is spontaneous change?A spontaneous change may be so fast or rapid or in a fraction of time that it is essentially instantaneous or fast or so slow that it cannot be observed over any practical time of period.
A is the spontaneous change is one in which the system happening into which the A an increase or boost in internal energy B lowering decline in entropy C lowering in energy D no energy change Medium.
The time-evolution or change of a system in which it releases free energy and it moves to a lower, or decreased more thermodynamically stable energy state, closer to attend the thermodynamic equilibrium.
Therefore, the system is left to change spontaneously then, and the state with the lowest possible energy is consistent with the state of maximum disorder. option A is correct.
Learn more about spontaneous change, here :
https://brainly.com/question/14437673
#SPJ2
An electric kettle uses electrical energy to boil water. Energy from the electricity is transferred to the water, heating it up. An electric ice maker also uses electrical energy, but it freezes water to form ice. Since energy can’t be created or destroyed, and water loses potential energy when it freezes to form ice, what happens to the energy put into the ice maker and the energy released by the water?
Answer:
Since energy can’t be created or destroyed, and water loses potential energy when it freezes to form ice. The energy remains electrical but then changes to kinetic when Enough energy is released.
Explanation:
Answer:
Explanation:
The overabundance of electrical energy acquired by water during the ice framing process is taken out as likely energy to keep up with the law of energy conservation. The electrical energy given to the ice generator pivots the engine inside the blower (compressor). The coolant available inside the blower is compressed and this pressure is accomplished alongside the creation of heat energy. The heat energy is delivered into the external encompassing air of the ice generator. This prompts a drop in the temperature of the coolant.
This coolant courses inside the ice generator and soaks heat energy (heat stream from the heater to the colder area) from the water as it gets once again to the blower, Thus prompting cooling of water and development of ice.
Please help this is due today! 5-11-2021
Observe the chemical reaction below, and identify if the equation is balanced or not. If it is not balanced, then what coefficient should you place for the reactants and products? Justify with scientific reasoning.
Mg + O2---------> MgO
Make sure to include the following details in your answer in complete sentences:
- Is the chemical reaction balanced?
- Is it following the law of conservation of mass, why is not following?
- What can you do to make sure that the equation becomes balanced and follow the law?
Answer:
- The chemical reaction is not balanced. There is two oxygens on the reactant's side while there's only one oxygen on the products side.
- I would not say it's following the law of conservation of mass as it's not a balanced equation.
- To balance this equation, you would need to add the coefficient of '2' to Magnesium (Mg) on the reactants side, and add the coefficient of '2' to the products side. This would make it so that there's 2 Mg's and 2 O's on both the reactant's side and products side.
edit: I hope this helped you in some way. ^^
Which of the following has the most energy?
heat
ultraviolet rays
the color blue
radio waves
Answer:
C
Explanation:
In order to tell the difference between microwaves and visible light in the blue range, which of the following measurements should be made?
Answer:
microwaves should be made
Answer:
answer choices plzzzzz
ima edit my answer wht are the choices
Explanation:
mrk mE BRAINLIEST PLZZZZZZZZZZZz
give an example for multi cellular fungi
a sac fungi, eomycota, zygomycota and chytrids are all examples :3
If an atom has 8 electrons and 8 protons and 9 neutrons then what is it's net charge?"
choices:
0
1+
1-
2-
When 0.875 g. of magnesium was heated in air, 1.25 g. of magnesium oxide
(MgO) was produced. How much oxygen must be added?
Answer:
1. What is the coefficient for calcium in the balanced equation?
2 Ca + 5 NaOH → 4 Na + 2 Ca(OH)2
2. The burning of 20.0 g of acetylene (C2H2) produces what mass of carbon dioxide? You must
write the equation, balance it and solve the mass-mass problem.
a. Balanced equation:
2 C2H2 + 5 O2 4 CO2 + 2 H2O
Explanation:
what is the molarity of a solution prepared dissolving 317 g of CaCl2 into enough water to make 2.50 L of solution?
Answer:
1.14 M
Explanation:
Step 1: Calculate the moles corresponding to 317 g of calcium chloride (solute)
The molar mass of calcium chloride is 110.98 g/mol.
317 g CaCl₂ × 1 mol CaCl₂/110.98 g CaCl₂ = 2.86 mol CaCl₂
Step 2: Calculate the molarity of the solution
Molarity is equal to the moles of solute divided by the liters of solution.
M = moles of solute / liters of solution
M = 2.86 mol / 2.50 L = 1.14 mol/L = 1.14 M
How many protons, neutrons, and electrons are found in a neutral atom of hydrogen-333?
Answer:
Explanation:
A hydrogen atom has an atomic number of 1.
So it's proton number will always be 1.
A neutral hydrogen atom does not have any charge.
So it has the same amount of electrons as protons, which turns out to be also 1.
A neutral hydrogen atom has an atomic mass of ≈
1.00794 amu ≈ 1 amu.
To find the amount of neutrons, we take the proton number and subtract it from the mass number.
1 − 1 = 0
So a neutral hydrogen atom has no neutrons.
In summary,
A hydrogen atom has
1 proton
1 electron
0 neutrons
I hope that helps!
How many grams of H2 are needed to completely react within 50g of N2?
Answer: 10.7 grams
Therefore, 10.7 grams of Hydrogen are necessary to fully react with 50.0 grams of Nitrogen.
Is everything correct?
_Ch7H16+_O2=_CO2+_H2O balancing the equation
Answer:
0,11,7,8
Explanation: hope this helps!
is zinc an example of a element or compound?
Answer:
Zinc is an element.
Explanation:
Compounds are composed of two or more elements
Answer:
element
Explanation:
zinc is an element with atomic number 30
what is the use of connective tissue
Answer:
Explanation:
Major functions of connective tissue include: 1) binding and supporting, 2) protecting, 3) insulating, 4) storing reserve fuel, and 5) transporting substances within the body. Connective tissues can have various levels of vascularity.
Answer:
Connective tissues can have various levels of vascularity.
Explanation:
A nebula is often made up of hydrogen and helium gases.
True
False
Answer:
Nebulae are made of dust and gases—mostly hydrogen and helium. ... Eventually, the clump of dust and gas gets so big that it collapses from its own gravity. The collapse causes the material at the center of the cloud to heat up-and this hot core is the beginning of a star.
Explanation:
Hope this helps
PLESE HELP WILL GIVE BRAINLYESTY
Imagine that you are Andreas Vesalius. Write a short autobiographical statement that talks about who you are, where you’re from, and some of your important contributions.
Answer:
My name is Andreas Vesalius and I'm a 16th-century Flemish anatomist, physician, and author of one of the most influential books on human anatomy, De Humani Corporis Fabrica Libri Septem. I am often referred to as the founder of modern human anatomy. I was born in Brussels, December 31, 1514 which was then part of the Habsburg Netherlands. I was a Flemish doctor who was notable for my contribution to the science of anatomy of the human body. I was the first to perform public dissection on a human corpse, a practice that was unusual in the Middle Ages due to spiritual beliefs.
Explanation:
positivities and negativity of computer creativity
answerrr BRAINLIEST PLS FAST
Explanation:
Some of the positive effects are faster communication, an organization of data and information, computerization of tasks, and easier access to the information. Some of the negative effects of computers are human's break their social interact with friends and families, cause back problem, depression, and poor health.Answer:
Creativity is a phenomenon whereby something somehow new and somehow valuable is formed. The created item may be intangible (such as an idea, a scientific theory, a musical composition, or a joke) or a physical object (such as an invention, a printed literary work, or a painting).
Scholarly interest in creativity is found in a number of disciplines, primarily psychology, business studies, and cognitive science, but also education, the humanities, technology, engineering, philosophy (particularly philosophy of science), theology, sociology, linguistics, the arts, economics, and mathematics, covering the relations between creativity and general intelligence, personality type, mental and neural processes, mental health, or artificial intelligence; the potential for fostering creativity through education and training; the fostering of creativity for national economic benefit, and the application of creative resources to improve the effectiveness of teaching and learning.

A picture of a lightbulb is associated with someone having an idea, an example of creativity.
How does increased exhalation of CO2 at the lungs (pulmonary regulation) restore the correct pH range?
Answer:
When CO2 levels become excessive, a condition known as acidosis occurs. This is defined as the pH of the
blood becoming less than 7.35. The body maintains the balance mainly by using bicarbonate ions in the
blood. As the body responds to neutralize this condition, an electrolyte imbalance – an increase of plasma
chloride, potassium, calcium and sodium, can occur.
On the bottom beam of the triple beam balance, each small division stands for
A.) one centimeter
B.) one milliliter
C.) one gram
D.) one-tenth of a gram
Answer:
Hello There!!
Explanation:
I believe the answer is D.) one-tenth of a gram.
hope this helps,have a great day!!
~Pinky~
[tex]\huge{\textbf{\textsf{{\color{navy}{An}}{\purple{sw}}{\pink{er}} {\color{pink}{:}}}}}[/tex]
D.) one-tenth of a gram
Thanks.Hope it helps.Which of the following factors affects the amount of heat absorbed by a substance?
A. Boiling point of the substance
B. Specific heat capacity of the substance
C. Melting point of the substance
D. Shape of the substance
Answer:
The correct answer is B, "Specific heat capacity of the substance."
Explanation:
I just took the test. I hope this helps!
Heat absorbed changes the bonds of the molecules or the compounds to alter their state. The specific heat capacity affects the amount of heat absorbed. Thus, option B is correct.
What is specific heat capacity?Specific heat capacity is defined as the amount of heat or energy absorbed by the kilogram of the solid reactant when the system experiences a rise in temperature. It is measured in J/(kg K) or J/(kg °C).
The specific heat capacity, the mass of the substance, temperature, and the phase of the substance affects the absorption of the heat from the surrounding. The specific heat affects absorption as it tells about the substance's ability to take the heat energy.
Therefore, specific heat capacity affects heat absorption.
Learn more about specific heat capacity here:
https://brainly.com/question/2530523
#SPJ5
How do ecosystems change overtime
Answer:
Ecosystems, the interactive system of living and nonliving organisms in a specific location, change slowly over time. When new plants and animals arrive in an area, they either thrive or struggle. Thriving species sometimes displace native species. When this happens, the system as a whole begins to change.
An endothermic dissolution process a. absorbs energy as heat and has positive enthalpy of solution. b. releases energy as heat and has positive enthalpy of solution. c. absorbs energy as heat and has negative enthalpy of solution. d. releases energy as heat and has negative enthalpy of solution.An endothermic dissolution process a. absorbs energy as heat and has positive enthalpy of solution. b. releases energy as heat and has positive enthalpy of solution. c. absorbs energy as heat and has negative enthalpy of solution. d. releases energy as heat and has negative enthalpy of solution.
Answer:
a. absorbs energy as heat and has positive enthalpy of solution.
Explanation:
A reaction can either be exothermic or endothermic. An endothermic reaction, as the dissolution described in the question, is that which absorbs heat energy from the surroundings in order to start the reaction.
Because an endothermic reaction makes heat lost from the surroundings, the enthalpy (∆H) of the solution will be positive (+). ∆H is got by finding the difference between the enthalpy of the reactants and products and since the enthalpy of a product in endothermic reaction is more, the enthalpy change (∆T) will be positive.
Consider the following reaction:
4FeS2 + 11O2 → 2Fe2O3 + 8SO2
When 28.42 grams of FeS2 reacts with 5.44 grams of O2, how many grams of SO2 are formed?
What is the limiting reactant?
What is the excess reactant?
I'm begging
2C2H6 + 8O2 = 4CO2 + 6H2O
My teacher wants to know how many moles are required, how many moles oaf carbon dioxide are produced and how many moles of water are produced. Can somebody please help me?
Answer:
4 moles of carbon
6 moles of water
Explanation:
I think as there no data given u have to is the numbers infront of the equation e.g 4CO2 so 4.
hope this helps :)