Answer:
50k is the km for this is the first send
Calculate the total distance travelled by the motorcyclist over 0-60
A 6kg block starts from rest against a spring with a spring constant of 500N/m that is compressed by a distance of 2m. The ground is frictionless. What will be the velocity of the block leaving the spring?
The velocity of the block leaving the spring is determined as 18.26 m/s.
Velocity of the block
The velocity of the block leaving the spring is calculated from the principle of conservation of energy.
K.E = Ux
¹/₂mv² = ¹/₂kx²
v² = kx²/m
v² = (500 x 2²)/6
v² = 333.33
v = √333.33
v = 18.26 m/s
Thus, the velocity of the block leaving the spring is determined as 18.26 m/s.
Learn more about velocity here: https://brainly.com/question/4931057
#SPJ1
A massless rod is attached to the ceiling by a string. Two weights are hung from the rod: a 0.4-lb weight at its left end and a 1.2-lb weight at its right end. The length of the rod is L and a string is attached (3L/4 from its left end) so that the rod (with attached weights) is horizontal. What is the tension in the string supporting the rod and the attached weights
The tension in the string supporting the rod and the attached weights is 7.11 N.
Tension in the string supporting the rodThe tension in the string supporting the rod and the attached weights is the sum of the weights supported by the strings.
T = (m1 + m2)g
where;
m1 and m2 are the two masses supported0.4lb + 1.2lb = 1.6lb = 0.725 kg
T = 0.725 x 9.8
T = 7.11 N
Learn more about tension here: https://brainly.com/question/918617
#SPJ1
Suppose a=3i-2j+k b=-i-4j+3k and c is avector lying along positive x axis with the property that a(b+c)=0 then find c?
The value of the c will be (0 i+0 j+0 k). c is a vector that is along the positive x-axis and has the condition a(b+c)=0.
What is a vector?A vector is a quantity or phenomena with magnitude and direction that are independent of one another. The phrase also refers to a quantity's mathematical or geometrical representation.
Given ;
a=3i-2j+k
b=-i-4j+3k
Given property:
a(b+c)=0
-i-4j+3k ((-i-4j+3k)+c)=0
(3+8+3)(-i-4j+3k)c=0
14(-i-4j+3k)c=0
c=0 i+0 j+0 k
Hence, the value of the c will be (0 i+0 j+0 k).
To learn more about the vector refer to the link;
https://brainly.com/question/13322477
#SPJ1
Hello people ~
A current passes through a resistor. If K₁ and K₂ represent the average kinetic energy of the conduction electrons and the metal ions respectively then
(a) K₁ < K₂
(b) K₁ = K₂
(c) K₁> K₂
(d) any of these three may occur
Answer:
K1>K2
Explanation:
The main reason behind this is law of conservation of momentum
Momentum can neither be created nor endorsed.But
the factor drift velocity affects the scenario.
Drift velocities of electrons is way more than velocities of ions so
K1 is greater than K2Option C
What can be described as a technology that uses high-frequency sound waves to create images
Answer:
Ultrasound imaging.
Explanation:
It uses high-frequency sound waves to view inside the body.
A crate is moved across a frictionless floor by a rope THAT is inclined 30 degrees above horizontal. The tension in the rope is 50 N. How much work is done in moving the crate 10 meters?
Only the horizontal component of the tension force is performing work on the crate. This component has magnitude (50 N) cos(30°) = 25√3 N, so the work done is
(25√3 N) (10 m) = 250√3 N•m ≈ 433 J
Three resistors of 100 W, 3900 W, and 1000 W are connected in series across a 200-V battery. What is the voltage drop across the resistor of value 1000 W?
Answer:
40 V
Explanation:
I will assume that the resistors are
100 and 3900 and 1000 OHMS <=====(NOT W)
In series , the resistances add together 100 + 3900 + 1000 = 5000 ohms total
V = IR
I = V / R so the total current will be 200 v / 5000 ohms = .04 amps
this is the current through all of the resistors
so for the 1000 ohm resistor V = IR .04 (1000) = 40 V
A 4 kg block is pushed 2m at an acceleration of 0.2 meter per second square up a vertical wall by constant force f applied at an angle of 37 degree with the horizontal if the coefficient of kinetic friction between the block and the wall is 0.30 find the work done by the applied force the frictional force
The work done by the applied force on the block against the frictional force is 15.75 J.
What is work done?Work done is equal to product of force applied and distance moved.
Work = Force x Distance
Given is a 4 kg block is pushed 2m at an acceleration of 0.2 meter per second square up a vertical wall by constant force f applied at an angle of 37 degree with the horizontal if the coefficient of kinetic friction, μ between the block and the wall is 0.30.
From the equilibrium of forces acting on the block, we have
F - f = ma
where, F is applied force, f is frictional force, m is the mass and a is the acceleration.
Frictional force f = μmgsinθ
Substitute the values, we get
Fcos(37) - μmgsin(37) = ma
Fcos(37) - (0.3)(4)(9.8)sin(37) = 4(0.2)
0.799F - 7.077 = 0.8
F = 9.86 N
Work done by the applied force is
W = Fdcosθ
W = 9.86 x 2 x cos(37)
W = 15.75 J
Thus, the work done by the applied force on the block against the frictional force is 15.75 J.
Learn more about Work done
brainly.com/question/13662169
#SPJ1
Read the scenario below and answer the question that follows.
Jean has been increasingly hyperactive, staying up all night, and finishing her work assignments in record time during the past few weeks. She feels it is a big improvement from how she felt before, when she was worried about losing her job, had trouble concentrating, and felt extremely irritable.
Jean is most likely suffering from __________ disorder.
A.
major depressive
B.
bipolar
C.
phobic
D.
generalized anxiety
Try to solve this question:
Explanation:
w = mg
on earth
w = mg
w = 60 × 9.8 = 588 N
on moon
w = mg
w = 60 × 1.6 = 96 N
on Mars
w = mg
w = 60 × 3.7 = 222 N
In this question,we solve it using the formulae below:
W=mg.
So to find the weight of the object in 1.Earth.Enter the given data on formula:
W=mg
W=60×9.8
W= 588N.2.Weight on the moon.
W=mg
W=60×1.6
W=96N3.Weight on Mars.
W=mg
W=60×3.7
W=222N.Which optical device can focus light to a point through reflection?
Answer:
A
Explanation:
did the quiz
Answer:
A
Explanation:
The magnitude of the angular momentum of the two-satellite system is best represented by
The magnitude of the angular momentum of the two-satellite system is best represented as, L=m₁v₁r₁-m₂v₂r₂.
What is angular momentum.?The rotational analog of linear momentum is angular momentum also known as moment of momentum or rotational momentum.
It is significant in physics because it is a conserved quantity. the total angular momentum of a closed system remains constant. Both the direction and magnitude of angular momentum are conserved.
The magnitude of the angular momentum of the two-satellite system is best represented as;
L=∑mvr
L=m₁v₁r₁-m₂v₂r₂
Hence, the magnitude of the angular momentum of the two-satellite system is best represented as, L=m₁v₁r₁-m₂v₂r₂.
To learn more about the angular momentum, refer to the link;
https://brainly.com/question/15104254
#SPJ4
Ben walks 500 meters from his house to the corner store. He then walks back toward his house, but continues 200 meters past his house to talk to a neighbor. It takes Ben 17 minutes from the time he leaves his house until he stops to talk to his neighbor.
Considering the definition of velocity, the average velocity of Ben is 0.3 [tex]\frac{meters}{second}[/tex].
Definition of velocityVelocity is a physical magnitude that relates the displacement of an object, the time it takes to make this change in position and direction.
Because the speed also considers the direction in which the displacement of an object occurs, it is considered a vector magnitude.
So, the velocity can be defined as the amount of space traveled per unit of time with which a body moves, considering the direction, and can be calculated using the expression:
[tex]velocity=\frac{distancetraveled}{time}[/tex]
Velocity has units of [tex]\frac{distance}{time}[/tex], such as [tex]\frac{meters}{second}[/tex] or [tex]\frac{meters}{minute}[/tex], and includes direction of travel.
SummaryBen walks 500 meters from his house to the corner store. He then walks back toward his house, but continues 200 meters past his house to talk to a neighbor.
So, you know:
Distance traveled= distance from the start-point to the end-point= 500 - 200= 300 meters from Ben's house to the neighbor.Time= 17 minutes= 1020 seconds (being 1 minute= 60 seconds).Replacing in the definition of velocity:
[tex]velocity=\frac{300 meters}{1020 seconds}[/tex]
Solving:
velocity= 0.3 [tex]\frac{meters}{second}[/tex]
Finally, the average velocity of Ben is 0.3 [tex]\frac{meters}{second}[/tex].
Learn more about velocity:
brainly.com/question/4418301
brainly.com/question/24990123
brainly.com/question/14244558
brainly.com/question/25288184
#SPJ1
When object 1 came into contact with object 2, object 2 got warmer. what can be concluded about the objects before they came into contact with each other? object 2 did not have thermal energy. object 1 had faster-moving particles. object 1 had less thermal energy. object 2 had fewer particles.
The statement that is true regarding the objects is that object 1 had faster-moving particles, which is option 2. Details about matter can be found below.
What is matter?Matter can be defined as any particle that has weight and occupies space.
Certain particles are present in the different states of matter. According to this question, when object 1 came into contact with object 2, object 2 got warmer.
This suggests that the particles in the object 1 is moving faster due to an increase in temperature.
Learn more about matter at: https://brainly.com/question/4513444
#SPJ1
Answer: b
Explanation: i took the quiz
On a hot day, the deck of a small ship reaches a temperature of 48
17.0°C seawater on the deck to cool it down. During the cooling, 3,710,000 J are transferred to the
seawater from the deck. Assume no energy or mass is lost from the system. Use c = 3,930 J/kg°C for
seawater.
Calculate the final temperature of the seawater-deck system.
Write your answer rounding to the nearest tenth.
The final temperature of the seawater-deck system is 990°C.
What is heat?The increment in temperature adds up the thermal energy into the object. This energy is Heat energy.
The deck of a small ship reaches a temperature Ti= 48.17°C seawater on the deck to cool it down. During the cooling, heat Q =3,710,000 J are transferred to the seawater from the deck. Specific heat of seawater= 3,930 J/kg°C.
Suppose for 1 kg of sea water, the heat transferred from the system is given by
3,710,000 = 1 x 3,930 x (T - 48.17)
T = 990°C to the nearest tenth.
The final temperature of the seawater-deck system is 990°C.
Learn more about heat.
https://brainly.com/question/13860901
#SPJ1
a metal block increases in tempreture from 15 digree to 60 digree when supplied with 13500 j of heat energy
By finding the specific heat, we can expect that the material of the block is copper or silver (or a mix).
Of which type of metal is the block made?We know that we give 13,500 joules of energy to the metal block (which we assume has a mass of 1kg) and the temperature increases from 15°C to 60°C.
Then the increase is:
60°C - 15°C = 45°C
Then this metal has a specific heat of:
H = 13,500j/(45°C*1 kg) = 300 J/°C*kg
So it could be copper, which has a specific heat of 380J/°C*kg or Silver, which has a specific heat of 240 J/°C*kg (or a mix of these two).
If you want to learn more about specific heat:
https://brainly.com/question/6198647
#SPJ1
please help
a piece of wood of mass 40g and uniform cross-sectional area of 2cm^2 floats upright in water. calculate the length of the immersed part of the wood
The length of the immersed part of the wood is 0.2m.
What is density?The density is the ratio of the mass and the volume of the object. It is denoted by ρ.
ρ = mass/Volume = m/V
Volume = Area of cross-section A x height h
Given is a piece of wood of mass 40g =0.04kg and uniform cross-sectional area A= 2cm² =2x10⁻⁴ m² floats upright in water.
The density of water ,ρ = 1000 kg/m³
The density related to length of part immersed is
1000 = 0.04/ (2x10⁻⁴ x h)
h = 0.2m
Thus, the length of the immersed part of the wood is 0.2m.
Learn more about density.
https://brainly.com/question/9215083
#SPJ1
Sound waves move the most quickly through which materiel?
A. Water
B. Iron
C. Milk
D. Air
Question 1 of 10
What is the wavelength of a wave with a frequency of 262 Hz and a speed of
343 m/s?
O A. 1.3 m
OB. 89,866 m
O C. 1.11 x 10-5 m
O D. 0.76 m
SUBMIT
Answer:
V = λ f (wavelength * frequency)
λ = V / f = 343 m/s / 262 / s = 1.3 m
The diagram shows two sets of vectors that result in a
single vector.
50 m
200 m
100 m
R
250 m
What are the first two steps for finding the magnitude
of the resultant vector?
find the square of the first horizontal vector and the
square root of the first vertical vector
find the square root of the first horizontal vector and
the square root of the second horizontal vector
find the sum of the two horizontal vectors and the
sum of the two vertical vectors
find the difference between the two horizontal
vectors and the difference between the two vertical
vectors
The first two steps for finding the magnitude of the resultant vector is find the sum of the two horizontal vectors and the sum of the two vertical vectors.
Resultant of two vectorsThe resultant of two vectors is determined from Pythagoras theorem is as shown below.
R² = a² + b²
First two steps of finding a resultant vectorsfind the sum of the two horizontal vectors and the sum of the two vertical vectors.Thus, the first two steps for finding the magnitude of the resultant vector is find the sum of the two horizontal vectors and the sum of the two vertical vectors.
Learn more about resultant vectors here: https://brainly.com/question/110151
#SPJ1
Question 1 of 32
Evaluate sin(55°).
From the four figure table, the value of sin(55°) to 4 dp is 0.8192.
What are trigonometric ratios?The term trigonometric ratios are those ratios that are obtained using the sides of a right angled triangle and they are sine, cosine and tangent.
If we have the value sin(55°), upon evaluation, we realize that the value of sin(55°) to 4 dp is 0.8192.
Learn more about trigonometric ratios:https://brainly.com/question/1201366
#SPJ1
it is seen that in a balloon filled with air,if we press one side of the balloon the other side bulges out.why is it so???
When we apply pressure on the one side of balloon the other side bulges out due to the movement of gas to other side.
What happen when we press one side of the balloon?If we press one side of the balloon, the other side bulges out because the gas that present on one side moves to the other side where there is no pressure. The body of balloon is elastic so when we apply pressure the other side bulges out.
So we can conclude that when we apply pressure on the one side of balloon the other side bulges out due to the movement of gas to other side.
Learn more about pressure here: https://brainly.com/question/25736513
#SPJ1
If i apply mascara on a roller coaster, will my eyelashes fly off or get ruined?
A uniform cylindrical rod is 0.63m long and it has cross sectional area of 0.1m. calculate the depth of immersion
The depth of immersion of the uniform cylindrical rod is 0.63m.
What is Depth of immersion?This is defined as the distance in which a body reaches when it is submerged.
Depth of immersion = Volume/Cross-sectional area
Volume = Cross-sectional area × length
= 0.1m² × 0.63m = 0.063m³
Depth of immersion = 0.063m³ / 0.1m²
= 0.63m
Read more about Depth of immersion here https://brainly.com/question/13554650
#SPJ4
what is the direction of the magnetic force on the charge
Answer: A
Explanation:
Six students each make an electromagnet for an investigation. Each student wraps copper wire around a nail and attaches each end of the wire to a 9-volt battery. The students use their electromagnets to pick up paper clips. The table shows the number of paper clips each student picks up with their electromagnet.
a) Write one question about how the electromagnets were made that the students could answer that would help explain the differences in the numbers of paper clips picked up by the electromagnets. Explain your reasoning.
b) Identify one factor, other than how the electromagnets were made, that would affect the number of paper clips picked up by the electromagnet. Explain your reasoning.
The question on how electromagnets are produced that students may answer to help explain the disparities in the quantity of paper clips taken up by the electromagnets "What is the strength of electromagnet”
What is static electricity?The imbalance of electric charges within or on the surface of a substance, or between materials, is known as static electricity.
Static electricity is generated by Van de Graaff generators. Static does not include acceleration, implying that it is stationary, which pertains to the formation of electric charges.
a)The question on how electromagnets are produced that students may answer to help explain the disparities in the quantity of paper clips taken up by the electromagnets "What is the strength of electromagnet”
b)The one factor, other than how the electromagnets were manufactured, that influences the quantity of paper clips the electromagnet picks up will be electrostatics.
Hence,the whole activity is about the electromagnets.
To learn more about static electricity refer:
https://brainly.com/question/12791045
#SPJ1
Q2
Radioactive waste from nuclear power stations is a man-made source of background
radiation.
(a) Give one other man-made source of background radiation
Answer:
the clock hand of watch which have radium-226 for luminance
After three half-lives have elapsed, the amount of an 8.0 g sample of a radionuclide that
(hint: pizza slices)
a. remains undecayed is 1.0 g
b. has decayed is 7.09
c. remains undecayed is one-third the original amount
d. more than one correct response
e. no correct responsel
After three half-lives have elapsed, the amount of an 8.0 g sample of a radionuclide that remains undecayed is 1.0 g.
What is Half-Life?Half-Life refers to the time it takes for half the amount of a substance to disappear or change.
The nucleus of the atoms of radioactive elements disintegrate to half their starting amounts after every Half-Life.
After three half-lives one-eight of the original atoms remain.
Therefore, after three half-lives have elapsed, the amount of an 8.0 g sample of a radionuclide that remains undecayed is 1.0 g.
Learn more about Half-Life at: https://brainly.com/question/26689704
#SPJ1
The sun produces visible light with different wavelengths. As wavelengths become longer,which of the following properties of the waves decreases?
Answer:
As wavelengths increase, the frequency of waves decreases.
Explanation:
As wavelengths increase, the frequency of waves decreases.
When there are longer waves, you could think of them as taking up more time to pass. For example, if there are really long waves (not talking about amplitude) at a beach, you could watch one up-and-down wave for a long time. If there are really short waves, you could watch many waves go by in a short time frame.