Answer:
Increases
Explanation:
The general effect we see as temperature increases is that rate of dissolution of a solid solute increases,
Therefore, we can say that :
Temperature ∝ Rate of dissolution
Based on Charles's law, which of the following statements is true for an ideal gas at a constant pressure and mole amount?
The number of collisions is independent of volume.
The number of collisions decreases with increase in volume.
Volume is directly proportional to absolute temperature.
Volume is inversely proportional to absolute temperature.
Answer:
the number of collisions is independent of Volume.
Based on Charles's law, an ideal gas at a constant pressure and mole amount is " the number of collisions is independent of volume."
What is Charles's law?Gases have a propensity to expand while heated, according to Charles' law, an innovative gas law.
What is collisions?A collision would be any situation in where two or even more bodies quickly number of factors on one another.
Based on Charles's law, an ideal gas at a constant pressure and mole amount is " the number of collisions is independent of volume."
Therefore, the correct answer will be option (A).
To know more about collisions and Charles's law
https://brainly.com/question/16927784
#SPJ3
Two chemicals react in an endothermic reaction. what can be known about this reaction? the new substance will need more energy to form its chemical bonds than the old substance will release. more energy will be released from the old substance than the new substance will need to form its chemical bonds. a precipitate will form as a result of the reaction. a gas will form as a result of the reaction.
The new substance will need more energy to form its chemical bonds than the old substance will release. Hence, option A is correct.
What is an endothermic reaction?Endothermic reactions are chemical reactions in which the reactants absorb heat energy from the surroundings to form products.
Endothermic reactions, in general, are those that absorb (or use) energy. In endothermic reactions, more energy is absorbed when bonds in the reactants are broken than is released when new bonds are formed in the products.
Normally, when a chemical bond is broken, energy is released in the process. The chemical bond formation also demands an energy input.
The energy that is supplied/released can come in varieties (such as heat, light, and electricity). The formation of chemical bonds following the absorption of heat from the environment characterizes endothermic processes.
When two chemicals react in an endothermic reaction the new substance will need more energy to form its chemical bonds than the old substance will release. Hence, option A is correct.
Learn more about the endothermic reaction here:
https://brainly.com/question/23184814
#SPJ1
20 ml of a mixture of C2H6 and C3H8 gases in X : Y mole ratio, is burnt completely by which 52 ml CO2 gas is evolved. If 20 ml of a mixture of CH4 and C4H10 gases in Y : X mole ratio is burnt completely then what is the volume (in ml) of CO2 gas evolved?
A) 40 B) 44 C) 50 D) 55
The volume of CO2 prodiced when 12 mL of CH4 and 8 mL of C4H10 is burnt is 56 mL.
What is the equation of the reaction?The equation of the combustion of C2H6, CH4, C4H10, and C3H8 gases are given below:
2 C2H6 + 7 O2 ---> 4 CO2 + 6 H20
C3H8 + 5 O2 ---> 3 CO2 + 4 H20
CH4 + 2 O2 ----> CO2 + 2 H2O
2 C4H10 + 13 O2 ---> 8 CO2 + 10 H2O
X moles of C2H6 will produce 2X moles of CO2
Y moles of C3H8 will produce 3Y moles of CO2
Thus;
X + Y = 20 mL
X =20 - Y ---(1)
2X + 3Y = 52 mL ---(2)
Solving for X by substituting in (2)
2 (20 - Y) + 3Y = 52
40 - 2Y + 3Y = 52
Y = 12 mL
Then X = 8 mL
Volume of CO2 produced when 12 mL of CH4 and 8 mL of C4H10 is burnt = (12 × 2 + 8 × 4) = 56 mL
Therefore, the volume of CO2 produced is 56 mL.
Learn more about moles of gas and volume at: https://brainly.com/question/23883946
#SPJ1
How many moles of na contain 7.88x1021 atoms of na
Answer:
the answer to the qustion is 0.013089701 na
Explanation:
n/a
Write the balanced equations for the following nuclear reactions.
ASAPPP
[tex]^{233}_{92}U\;\rightarrow\;^4_{2}He\;+\;^{229}_{90}Th[/tex] is the balanced equations for the following nuclear reactions.
What are balanced equations?A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products
Uranium-233 is produced by the neutron irradiation of thorium-232. When thorium-232 absorbs a neutron, it becomes thorium-233, which has a half-life of only 22 minutes.
Hence, [tex]^{233}_{92}U\;\rightarrow\;^4_{2}He\;+\;^{229}_{90}Th[/tex] is the balanced equations for the following nuclear reactions.
Learn more about the balanced equations here:
https://brainly.com/question/12192253
#SPJ1
Select the correct answer from each drop-down menu. a 126.1-gram block of granite at 92.6°c is dropped into a tub of water at 24.7°c in an isolated system. the final temperature of both the granite and the water is 51.9°c. the specific heat capacity of granite is 0.795 joules/gram degree celsius, and the specific heat capacity of water is 4.186 joules/gram degree celsius. the granite block transferred of energy, and the mass of the water is .
Taking into account the definition of calorimetry, the mass of water is 35.70 grams.
What is calorimetryCalorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
So, the equation that allows to calculate heat exchanges is:
Q = c× m× ΔT
where:
Q is the heat exchanged by a body of mass m.c is the specific heat substance c. ΔT is the temperature variation.Mass of water in this caseIn this case, you know:
For granite:
Mass of granite= 126.1 gInitial temperature of granite= 92.6 °CFinal temperature of granite= 51.9 ºCSpecific heat of granite = 0.795 [tex]\frac{J}{gC}[/tex]For water:
Mass of water = ?Initial temperature of water= 24.7 ºCFinal temperature of water= 51.9 ºCSpecific heat of water = 4.186 [tex]\frac{J}{gC}[/tex]Replacing in the expression to calculate heat exchanges:
For gold: Qgranite= 0.795 [tex]\frac{J}{gC}[/tex] × 126.1 g× (51.9 °C - 92.6 °C)
For water: Qwater= 4.186 [tex]\frac{J}{gC}[/tex]× mass of water× (51.9 °C - 24.7 °C)
If two isolated bodies or systems exchange energy in the form of heat, the quantity received by one of them is equal to the quantity transferred by the other body. That is, the total energy exchanged remains constant, it is conserved.
Then, the heat that the gold gives up will be equal to the heat that the water receives. Therefore:
- Qgranite = + Qwater
- 0.795 [tex]\frac{J}{gC}[/tex] × 126.1 g× (51.9 °C - 92.6 °C)= 4.186 [tex]\frac{J}{gC}[/tex]× mass of water× (51.9 °C - 24.7 °C)
Solving:
4,080.15465 J= 4.186 [tex]\frac{J}{gC}[/tex]× mass of water× 27.3 °C
4,080.15465 J= 114.2778 [tex]\frac{J}{g}[/tex]× mass of water
mass of water= (4,080.15465 J)÷ 114.2778 [tex]\frac{J}{g}[/tex]
mass of water= 35.70 grams
Finally, the mass of water is 35.70 grams.
Learn more about calorimetry:
brainly.com/question/11586486
brainly.com/question/24724338
brainly.com/question/14057615
brainly.com/question/24988785
#SPJ1
Having problems figuring out molar mass in general. steps would be most appreciated.
Answer:
The periodic table
Explanation:
As you can see in the screenshot. Each element on the periodic table has an atomic number and a mass number. The atomic numbers are arranged in numerical order from right to left in the periodic table. The second number there is the atomic mass.
When doing stoichiometric ratios, you need to use the atomic mass of each element to determine the molecular/molar mass.
example. Find the molar mass of
H₂SO₄
Hydrogen (2) + sulphur (1) +oxygen (4)
= atomic mass of H(2)+ atomic mass S(1)+ atomic mass oxygen(4)
=1(2) + 32(1)+16(4)
=2+32+64
=98
N.B We do not use the co-efficient when looking for molar mass, we only use the atom and subscript
How does engineering affect the amount of human labor needed to harvest rice?
Answer:
Yes
Explanation:
The first step of harvesting is draining the paddy. Next, farmers cut the plants -- with a scythe or sickle if by hand -- and transport them elsewhere to be laid out and dried for two or three days. Rice can be cut by hand or machine. In the developed world, harvesting by hand is still very common.
A solution of potassium nitrate is made when potassium nitrate dissolves in water.
Describe a method you could use to obtain crystals of potassium nitrate from
potassium nitrate solution.
You should include an explanation of the process by which the crystals are produced
from the solution.
[6 marks]
Answer:
Boil the water and stir in potassium nitrate. If it doesn't all dissolve, you can cook it on the stove or microwave it until the water boils again. Remove the solution from heat, but let it cool slowly for the best crystal formation.
The diagram below shows three kettles with their powers and the time they take to boil 500cm3 of water. How much energy is transferred (in kilojoules, kJ) by the 1.4kW kettle while it boils the water?
The energy transferred is given as the product of power and time. The 1.4 kW kettle with boiled water produces 378 kJ of energy.
What is energy?Energy is the quantitative property that determines the work done by the body in the form of heat and light.
The image showing the kettles with time and power is attached below.
Given,
Power of the kettle = 1.4 kW
Time taken = 4.5 minutes
If power = energy ÷ time
Then, energy = power × time
= 1.4 × 0.075
= 0.105 KWh
Therefore, 0.105 kWh or 378KJ is the energy transferred.
Learn more about energy here:
https://brainly.com/question/16948772
#SPJ1
if energy can neither be created nor destroyed, into what kinds of energy have these resources been transformed?
Answer:
Heat, Sound
Explanation:
I am pretty sure you are addressing mechanical energy and machine efficiency. So you are probably aware a machine can't achieve 100% efficiency because of the first and second laws of thermodynamics. This energy is lost to friction and air resistance. They convert some gravitational potential energy to heat and sound energy rather than all to kinetic energy, and vice versa.
Compare the temperature change for cold sand and cold water when the same amount of hot water was added. what do you discover?
When the same amount of heat is added to cold sand and cold water, the temperature change of sand will be higher because of its lower specific heat capacity.
What is specific heat capacity?Specific heat capacity is the quantity of heat required to raise a unit mass of a substance by 1 kelvin.
Specific heat capacity of water and sandWater, c = 4,200 J/kg⁰C
Sand, c = 830 J/kg⁰C
Q = mcΔθ
where;
Δθ is temperature changeQ is quantity of heat addedΔθ = Q/mc
Thus, for an equal mass of water and sand, when the same amount of heat is added to cold sand and cold water, the temperature change of sand will be higher because of its lower specific heat capacity.
Learn more about specific heat capacity here: https://brainly.com/question/21406849
#SPJ1
Answer:t
Explanation:
A gas cylinder contains exactly 1 mole of oxygen gas (O2). How many molecules of oxygen are in the cylinder?
The number of molecules of oxygen in the cylinder is 6.02×1023 molecules
Data obtained from the question
Number of mole of oxygen = 1 mole
Number of molecule of oxygen =?
From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×1023 molecules. This implies that 1 mole of oxygen contains 6.02×1023 molecules.
Since the cylinder contains 1 mole of oxygen, then the number of molecules of oxygen present in the cylinder is 6.02×1023 molecules.
PLS I WILL GIVE BRAINLY How do the number of violence electrons of the light metals compared to those heavier than boron
The valence electron of the light metals are all in the range of 1 to 3.
What are Valence electron ?Valence Electron is the number of electrons in the outer shell of an atom which participate in bond formation.
Number of Valence Electron in Boron is 3 and other light metals lighter than Boron have 1 , 2 of Lithium and Beryllium respectively,
The valence electron of the light metals are all in the range of 1 to 3.
To know more about Valence Electron
https://brainly.com/question/12717954
#SPJ1
Identify the solutions among the following mixtures
Soil, Sea water, Air, Coal, Soda water
Answer:
Out of the above mixtures, seawater, air, and soda water are solutions.
hope this helps :3
Check Your Learning
What mass of CO is required to react with 25.13 g of Fe2O3
according to the equation Fe₂O3 + 3 CO2 Fe + 3CO₂?
Answer:
convert the 25.13 g of Fe2O3 into moles by dividing by its molar mass (159.69) to get that. When looking at the stoichiometric coefficients, we can see that for every 1 mole of Fe2O3, there needs to be 3 moles of CO.
Explanation:
Describe the method you could use to investigate the volume of hydrogen produced during the electrolysis of sodium chloride.
Answer:
Gas tests include:
hydrogen - lighted splint goes out with a squeaky pop.
Explanation:
Name all these please I need help. Write the names of the fallowing accoring to the IUPAC rules.
#1
You used red pen highlight which made things messier
The correct name should be.
9-methyl dec-1,2-dieneAs a methyl group attached with 9th carbon
#2
methyl group at 4
double bond at 2
4-Methyl Pent-2-ene#3
Three methyl groups are present
Double bond at 2
2,5,5-Trimethyl Hex-2-ene#4
2,5-Dimethyl Hept-3,5-diene#5
2,5-Dimethyl Hex-3-ene
which compund do not exist in independant molecular form
Answer:
Ionic compounds do not exist in independent molecular form
-Lexi
A company is announcing the construction of a new skyscraper to the public. Which model will give the best idea of how the new building will change the city skyline?
A.
a drawing showing the interior of the building
B.
a full scale, three-dimensional model of the building
C.
a rough sketch of the building's shape
D.
a drawing showing both the new and old buildings
Answer:
D.
Explanation:
This is because this option would allow one to see the sorroundings of the new building. The others only give perpectives on what the new building looks like, isolated from its sorroundings.
(i) Give the two dyes that are mixed to make brown hair dye.
Answer:
green n yellow and white and black and white sq
what is the specific heat capacity of propan-1-ol
Answer:
14
Explanation:
sun normal persentage is 14
a student used a vernier magnetic field sensor to measure the strength of the magnetic field generated by a bar magnet. at which position is the
strength of the magnetic field strongest point a or point b?
The position is the strength of the magnetic field strongest is is the place where the magnetic field leaves, being point A.
What generates a magnetic field?When an electrically charged particle moves, it creates a magnetic field. According to the laws of electromagnetism, this magnetic field originates from the variation of the electric field strength.
In the region of the poles we see that the lines of magnetic induction are closer to each other, therefore, we consider that close to the poles the magnetic field is more intense.
See more about magentic field at brainly.com/question/14848188
#SPJ1
What differences do you notice when you heat up the brick and the iron at same temperature?
After heating the brick and the iron, it is observed that the brick heats up quicker and the brick releases energy quicker.
What is thermal energy?Thermal energy (also called heat energy) is produced when a rise in temperature causes atoms and molecules to move faster and collide with each other.
The iron has more energy than the brick even though it is at the same temperature. That means that the iron must have more particles than the brick.
Iron and brick are both solids and have the same volume, so the difference in total energy must be due to atomic composition.
Learn more about thermal energy here:
https://brainly.com/question/14506133
#SPJ1
How do you know which element the little number (subscript) goes with?
Answer:
you will not
Explanation:
the little subscript number just indicates how many of a certain atom is in a molecule... example H₂O... that little ₂ means that there are 2 hydrogen atoms in the water molecule.
there is an invisible ₁ on the O as well. H₂O₁ shows there is one oxygen atom in the water molecule, but we do not show the 1
Answer:
The little number you see to the right of the symbol for an element is called a subscript. That number indicates the number of atoms of that element present in the compound. When balancing an equation, you can change the coefficients but not the subscripts.
What kind of scientist would study how mistletoe harms trees
Answer:
A Dendrologist! They are the type of Scientist that studie trees.
pls help me with this chem question
Answer:
B
Explanation:
i just know
Answer:
B
Explanation:
Hydrocarbons are with hydrogen and carbon only, so therefore you can immediately eliminate C and D. Therefore, we are left with A and B. Unsaturated hydrocarbons have double bonds or more, so B would be our answer (Double bond between carbon 1 and 2)
In the chemical equation below, name the reactant(s) and product(s).
CH4 (g) + O2 (g) → CO2 (g) + H₂O (g)
Answer:Methane(CH4) and dioxygen(O2) are the reactants
Carbon dioxide(CO2) and water(H2O) are the products
Explanation:
Identify a cation. An atom that has gained a proton. An atom that has lost an electron. An atom that has gained an electron. An atom that has lost a proton.
the answer would be B an atom that has lost an electron
density is ______ to pressure
Answer:
When pressure increases, density increases.
When the pressure decreases, density decreases.
When density increases, pressure increases.
When density decreases, the pressure decreases.
Explanation: