Explanation:
Mass (m)=0.3 kg
height(h)=2.6 m
acceleration due to gravity (g)=10m/s^2
Potential energy= MGH
=0.3×10×2.6
7.8 J
Give brainliest if u can
give me the type of reactions ___ CuCO3 → ___ CuO + ___ CO2
2.14g of sodium sulfide react with excess hydrochloric acid to form sodium chloride and dihydrogen sulfide.
BALANCE IT TO AN EQUATION
Answer:
2.14 Na2S + 1.99 HCl ----> 3.20 NaCl + 0.935 H2S
Explanation:
The Balanced equation is
Na2S + 2HCl = 2NaCl + H2S
As we can see -
78.0452 g/mol of sodium sulfide reacts with 2 mole of HCl.
Mass of one mole of HCl = 36.458 g/mol
So, 78.0452 g/mol of sodium sulfide reacts with 2* 36.458 g/mol of HCL to produce 2* 58.44 g of NaCl and 34.1 g/mol of H2S
Thus,
2.14g of sodium sulfide will react with (2* 36.458/78.0452)* 2.14 of HCl
2.14g of sodium sulfide will react with 1.99 g of HCl
2.14 Na2S + 1.99 HCl ----> (2* 58.44/78.0452) *2.14 NaCl + (34.1/78.0452) * 2.14 H2S
2.14 Na2S + 1.99 HCl ----> 3.20 NaCl + 0.935 H2S
The balanced chemical equation for the reaction between sodium chloride and silver nitrate is:
NaCl ( aq ) + AgNO3 ( aq ) AgCl ( s ) + NaNO3 ( aq )
We can interpret this to mean:
1 mole of sodium chloride and mole(s) of silver nitrate
React to produce:
mole(s) of silver chloride and mole(s) of sodium nitrate
Answer:
We can Interprete it as 1mole of Sodium Chloride and 1mole of Silver Nitrate React to Produce
1Mole of Silver Chloride and 1Mole of Sodium Nitrate
Answer:NaCL
Explanation:Edg
Mention any two uses of oxygen gas.
Answer:
steel, plastics
Explanation:Hope it helps!
what is tyndall effect
The scattering of the particles of the light in suspension and colloid is the Tyndall effect or scattering.
What are colloidal solutions?Colloidal and suspension are the types of solution that contains the mixture of the solute in the solvent. The colloidal solution includes the insoluble solute dispersed in the medium.
The light directed towards the colloidal solution gets scattered by the solute particles present in the solution and hence is used to prove true solutions apart from the colloidal and suspension.
Therefore, the Tyndall effect is the light scattering by colloidal solution.
Learn more about the Tyndall effect here:
https://brainly.com/question/14431922
#SPJ1
How much energy is required to raise the temperature of a 300.0
gram block of lead from 22.3°C to 59.9°C? The specific heat of lead is
0.129 J/gºC.
Answer:
Q = 1455.12 Joules.
Explanation:
Given the following data;
Mass = 300 grams
Initial temperature = 22.3
Final temperature = 59.9°C
Specific heat capacity = 0.129 J/gºC.
To find the quantity of energy;
[tex] Q = mcdt[/tex]
Where,
Q represents the heat capacity.
m represents the mass of an object.
c represents the specific heat capacity of water.
dt represents the change in temperature.
dt represents the change in temperature.
dt = T2 - T1
dt = 59.9 - 22.3
dt = 37.6°C
Substituting the values into the equation, we have;
[tex] Q = 300*0.129*37.6 [/tex]
Q = 1455.12 Joules.
bacterial cells.
Which label belongs in the area marked animal?
nucleus
DNA
cell wall
ribosomes
Answer:
I believe it would be (nucleus)
select all that are heterogeneous mixtures.
A) soil
B) steel
C) concrete
D) kool-aid
E) open can of soda
PLEASE HELP.
What does the atomic number of an element tell us?
A) the number of neutrons in an atom of an element
B) the number of protons in an atom of an element
C) the number of protons, electrons, and neutrons in an element
I really need help please someone help me?!.
Those are all the questions.
Answer:
question two is most likely you can describe the shape as a twisted ladder, thats what I learned in school.
Explanation:
YW
Which are three ways water reaches the atmosphere?
A. sublimation, condensation, transpiration
B. evaporation, radiation, and condensation
C. transpiration, evaporation, and sublimation
Answer:
C. Transpiration, evaporation, and sublimation.
Explanation:
thank you to the internet.
Describe one way in which advances in space technology have improved our understanding of objects in space.
Answer:
Technology helps us in many ways.
Explanation:
We can now research the world even more effectively and at a higher level of sophistication thanks to technological advancements. Telescopes, on the other hand, enable us to peer into the far corners of the universe and detect very large objects such as stars. Electron microscope enable us to see smaller objects such as cells and organisms.
What is the final volume of gas that initially occupies 2.50 L at 298 K and is subsequently heated to 321 K?
Answer: [tex]2.69\ L[/tex]
Explanation:
Given
The initial volume [tex]V_1=2.5\ L[/tex]
Temperature [tex]T_1=298\ K[/tex]
Final temperature [tex]T_2=321\ K[/tex]
Suppose pressure is constant for this process
[tex]\therefore \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
Insert the values
[tex]\Rightarrow \dfrac{2.5}{298}=\dfrac{V_2}{321}\\\\\Rightarrow V_2=\dfrac{321}{298}\times 2.5\\\\\Rightarrow V_2=2.69\ L[/tex]
7. Which type of electromagnetic radiation can be dangerous to living things?
a. Radio waves
b. Visible light
c. Gamma rays
A certain element has a half-life of three years.
If you currently have a 10g sample of that element and you know that it has undergone five half-life decays, how many grams of the element were in the sample originally?
A
150g
B
160g
C
320g
D
50g
(C) 320 g
Explanation:
A = A02^(-t/hl)
where hl = half-life
A0 = original amount
A = present amount
t = elapsed time = 5 half-lives
10g = A02^(-5) = A0/32
A0 = 32×(10 g) = 320 g
True or False?
When it is summer in the Northern Hemisphere, it is summer all around the word
Find the molality of a solution of 58.5 g NaCl dissolved in 0.556 kg of water
Answer:lmk
Explanation:
5. A sample of an unknown metal has a mass of 120.4 g. As the sample cools from 90.5°C to 25.7°C, it releases 7020. J of energy. What is the specific heat of the sample? Identify the metal among those in the data table below. Finally, is this endothermic or exothermic?
Answer: The specific heat capacity of the sample is [tex]0.899 J/g^{o}C[/tex] and as heat is released in this reaction so it is exothermic in nature.
Explanation:
Given: Mass = 120.4 g
Heat energy released = -7020 J
Initial temperature = [tex]90.5^{o}C[/tex]
Final temperature = [tex]25.7^{o}C[/tex]
Formula used is as follows.
[tex]q = m \times C \times (T_{2} - T_{1})[/tex]
where,
q = heat energy
m = mass of substance
C = specific heat capacity
[tex]T_{1}[/tex] = initial temperature
[tex]T_{2}[/tex] = final temperature
Substitute the values into above formula as follows.
[tex]q = m \times C \times (T_{2} - T_{1})\\-7020 J = 120.4 g \times C \times (90.5 - 25.7)^{o}C\\C = \frac{-7020 J}{120.4 \times (-64.8^{o}C)}\\= \frac{7020 J}{7801.92} J/g^{o}C\\= 0.899 J/g^{o}C[/tex]
When heat is released in a process or reaction then it means it is exothermic in nature.
Thus, we can conclude that the specific heat capacity of the sample is [tex]0.899 J/g^{o}C[/tex] and as heat is released in this reaction so it is exothermic in nature.
Please help me!! And please no links!!!!
Write a clear scientific explanation of how and why the water ended up on the mirror and not in the tub. Be sure to include scientific vocabulary (including any phase changes that occurred and the role of kinetic energy).
Vocabulary words-
Condensation
Gas
Heat
Kinetic energy
Liquid
Steam
Vaporization
Water vapor
Answer:
The water was hot it turned into steam then turned to water vapor and the got attached to the glass and as the gas got attached the glass and it built up then became water again. As the vaporization was happening the gas was moving hence the energy building up.
Explanation:
what are binory compounds
Answer:
You meant binary compounds ryt?
Then,
Binary compounds are chemical compounds comprising of two distinct elements
How many pairs of electrons are shared by adjacent carbon atoms in an alkane?
Answer:
one
Explanation:
At a high concentration do you have more or less particles per unit volume
Answer:
More particles per unit volume
Explanation:
Concentration means the amount of solute in a solution. Now, the amount of solute also means the number of particles of solute present in a solution.
Hence, when we use the term "high concentration", we imply that the amount of solute present or the number of particles present in a solution is high.
Thus, at high concentration, there are more solute particles than solvent particles in a solution.
write in the chart which molecule is the acid,base, conjugate base,conjugate acid from the equation and watching the H+ movement
1 H2CO3 + H2O--- H3O+ +HCO3-
2 H3PO4 + H2O--- H2PO- +H3O+
3. HCO3- + H2O---H2CO3 +OH-
4 HNO3 +H2O---NO3- +H3O+
Answer:
When H2O acts as a base, it gains one H, which forms its conjugate acid, H30. ... Write the formula for the conjugate base for each of the following acids: a. ... H3PO4(aq) + H2O(l) 7 H2PO4 (aq) + H3O+(aq) ... CO32-(aq) + H2O(1) 2 HCO3 (aq) + OH(aq) ... balanced equation for the reaction of the ammonium ion with water.
The shape of the methane molecule(ch4) is called
Answer:
Tetrahedral
Explanation:
How many grams would be in 1.752 x10^26 formula units of Ca(No3)2
Answer:
47730 grams.
Explanation:
First we convert 1.752x10²⁶ formula units of Ca(NO₃)₂ into moles, using Avogadro's number:
1.752x10²⁶ formula units ÷ 6.023x10²³ formula units/mol = 290.88 molThen we convert 290.88 moles of Ca(NO₃)₂ into grams, using the molar mass of Ca(NO₃)₂:
290.88 mol * 164.088 g/mol = 47730 g2.91 moles of aluminum are how many grams(with work)
Type the correct answer in the box. Express your answer to three significant figures. Iron(II) chloride and sodium carbonate react to make iron(II) carbonate and sodium chloride: FeCl2(aq) + Na2CO3(s) → FeCO3(s) + 2NaCl(aq). Given 1.24 liters of a 2.00 M solution of iron(II) chloride and unlimited sodium carbonate, how many grams of iron(II) carbonate can the reaction produce? The reaction can produce grams of iron(II) carbonate.
Answer:
Explanation:
To solve this problem we have to find the moles of iron(II) chloride that react. Using the chemical equation, we can kknow moles FeCl2 = Moles FeCO3. Thus, we can find the moles of FeCO3. Converting these moles to grams using its molar mass -Molar mass FeCO3: 115.854g/mol-
Moles FeCl2 = Moles FeCO3:
1.24L * (2.00mol / L) = 2.48 moles FeCl2
Mass FeCO3:
2.48mol * (115.854g / mol) =
The reaction can produce 287 grams of iron(II) carbonateAnswer:
its 287
Explanation:
i got it right on edm
How could the amount of ice cover at the poles be indirectly affected by an increase in evaporation near the equator? Explain.
Answer:
The factors that determine the extent of the ice cover at the poles are the temperature, the winds and the ocean currents. The Artic Ocean sea ice cover is observed to change more in response to a changes in temperature while the Antarctic sea ice cover change more with changes in the wind and ocean currents
Increased evaporation at the equator will come about as a result of rising temperatures combined with the high temperatures of the summer can result in a reduction in the amount of ice cover in the North pole oceans, while the high evaporation rate can lead to higher ocean water circulation rate between North and South poles and the equator such that the ice cover in Antarctica
Therefore, an increase in evaporation near the equator will decrease the ice cover at the poles
Explanation:
The individuality of an organism is
determined by the organism's
A) amino acids
B) DNA nucleotide sequence
C) nitrogenous bases
D) transfer RNA molecules
Is this correct??Pls help!!!
Answer:
C
Explanation:
Answer:
Yes, your answer is correct. B is correct :3