The volume of the air mattress filled with 0.55 moles of air and has a temperature of 295 k and an absolute pressure of 3.5 kilopascals is 386L.
How to calculate volume?The volume of a gas can be calculated by using the ideal gas law equation as follows:
PV = nRT
Where;
P = pressureV = volumen = number of molesR = gas law constantT = temperature0.0345 × V = 0.55 × 0.0821 × 295
0.0345V = 13.32
V = 386L
Therefore, the volume of the air mattress filled with 0.55 moles of air and has a temperature of 295 k and an absolute pressure of 3.5 kilopascals is 386L.
Learn more about volume at: https://brainly.com/question/12357202
#SPJ1
Answer:
The answer is 34.2 L.
Explanation:
Ideal Gas Law = PV = nRT
(where P is pressure, V is volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in Kelvin.)
Plug in the known values into the Ideal Gas Law equation:
3.5 kPa * V = 0.55 moles * 8.31 J/mol*K * 295 K
Finally, solve for V:
V = (0.55 moles * 8.31 J/mol*K * 295 K) / 3.5 kPa
= 34.2 L
help help help help help help
The exercise requires you to complete the sentences using the drop down. The complete sentences are given below.
Which step in the design process is represented by each of the following?The topic that was chosen because many students experienced cracked cell phone screens is: Protecting Cell Phones;Discussing ideas for possible cell phone cases: Phones that are durable;Writing down their list of requirements needed to make the phone case: Colorful and funky.Learn more about completing sentences at:
https://brainly.com/question/2339462
#SPJ1
Which element has the largest atomic radius?
Answer:
Ba
Explanation:
Atomic radius increases going right to left, and up to down.
So the closest element to the bottom left corner is Ba.
how can you explain that even though you continue to add pure water into a substance, even though the resultant ph might differ a little, the acidity or alkalinity of substance still remains the same to that of substance?
Addition of pure water does not change pH of a solution because pure water has neutral pH.
Why the pH does not change when pure water is added?Even though you continue to add pure water into a substance, the acidity or alkalinity of substance still remains the same to that of substance because pure water has neutral pH which can't change the acidity or alkalinity of a solution.
So we can conclude that addition of pure water does not change pH of a solution because pure water has neutral pH.
Learn more about acid here: https://brainly.com/question/25148363
#SPJ1
What happens when a solid is dissolved into a liquid?
O Solid particles float toward the surface layer of liquid particles.
O Solid particles sink down toward the bottom layer of liquid particles.
O Solid particles become evenly dispersed among liquid particles.
O Solid particles become suspended in the middle of liquid particles.
When a solid dissolves in a liquid to form a solution, solid particles become evenly dispersed among liquid particles.
What are solutions?Solutions are formed when a solute particle dissolves in another substance known as a solvent.
Usually, solutions are formed when solids dissolve in liquids.
The solid is the solute while the liquid is the solvent.
When a solid dissolves in a liquid, solid particles become evenly dispersed among liquid particles.
Therefore, solutions are formed when solute particles dissolve in solvents.
Learn more about solutes and solutions at: https://brainly.com/question/25326161
#SPJ1
Answer:
c
Explanation:
chem ed 2022
G.P.E. on Earth is determined by an object's _______and _______
Answer:
mass and height of the object.
Decomposition occurs when...
Answer:
Decomposition begins at the moment of death, caused by two factors: 1.) autolysis, the breaking down of tissues by the body's own internal chemicals and enzymes, and 2.) putrefaction, the breakdown of tissues by bacteria.
Explanation:
hope it will help you
if this strand is replicated what is the complementary strand that is produced
Answer:
During DNA replication, each of the two strands that make up the double helix serves as a template from which new strands are copied. The new strand will be complementary to the parental or “old” strand. Each new double strand consists of one parental strand and one new daughter strand.
Explanation:
hope it helps you
Which radioisotope is used to treat thyroid disorders?.
Answer:
I-123 and I-131
Explanation:
Radioactive iodine takes advantage of the fact that thyroid cells and thyroid cancer cells absorb iodine; therefore, it has been used to diagnose or treat various thyroid disorders. Iodine is made into two radioactive isotopes, I-123 and I-131, that are commonly used in patients with thyroid disease.
What mass of Na2CO3 will be required to dissolve in 0.3 L of water to make a 0.5 M solution?
The mass of [tex]Na_2CO_3[/tex] that will be required to be dissolved in water would be 15.9 grams
Solution preparationRecall that: molarity = mole/volume in L
In this case, the volume is 0.3 L and the molarity is 0.5 M.
Thus, mole = molarity x volume = 0.5 x 0.3 = 0.15 moles
Mass of 0.15 moles [tex]Na_2CO_3[/tex] = 0.15 x 106 = 15.9 grams
More on solution preparation can be found here: https://brainly.com/question/14667249
#SPJ1
You can make a solution (solid solute) more concentrated by
adding more solute
O increasing the pressure
adding more water
adding more solvent
Answer:
increasing the pressure
Explanation:
You can make a solution more concentrated by increasing the pressure.
Describe the difference between the rate of diffusion seen for sodium and urea.
Balance the following chemical reaction :p(s) + cl2(g) = pcl5(s)
Answer:
[tex]2\text{P}+ 5\text{Cl}_2 \rightarrow 2\text{PCl}_5[/tex]
Explanation:
Answer:
2P (s) + 5PCl₂ (g) → 2PCl₅ (s)
Explanation:
There are 2 chlorine atoms on the reactant side and 5 chlorine atoms on the product side.
Hence, multiply the left chlorine molecule by 5 and right compound by 2.
⇒ P (s) + 5 × Cl₂ (g) → 2 × PCl₅
⇒ P (s) + 5Cl₂ (g) → 2PCl₅ (s)
But, now we see that there is 1 phosphorus atom on the reactant side and 2 phosphorus atoms on the right.
So, multiply the left phosphorus atom by 2 to balance.
⇒ 2 × P (s) + 5PCl₂ (g) → 2PCl₅ (s)
⇒ 2P (s) + 5PCl₂ (g) → 2PCl₅ (s)
How many particles would be found in a 12.7g sample of ammonium carbonate?
answer choices are:
2.9 x 10^22 particles
7.96 x 10^22 particles
i cannot get it, please help
multiplying terrorist to power 23, divided by 96. Multiplied by 12.7. so this is 76.48
7.96 x 10²² particles would be found in a 12.7g sample of ammonium carbonate. A particle is a tiny, localized item.
What is particles in chemistry?A particle is a tiny, localized item that may be defined by a number of physical or chemical characteristics, including volume, density, and mass. They range significantly in size or number from tiny particles like atoms to subatomic particles such as the electron.
Depending upon their density, particles can potentially be utilized to mimic even bigger things, such as moving celestial bodies or a throng of people. Although the meaning of the word particle is quite broad, different scientific disciplines might refine it as necessary. Any substance made up of particles is referred to as a particulate.
number of moles = given mass/ molar mass
= 12.7/ 96.08
= 0.13moles
number of particle= 0.13 × 6.022×10²³
= 7.96 x 10²²
Therefore, 7.96 x 10²² particles would be found in a 12.7g sample of ammonium carbonate.
To know more about particles, here:
https://brainly.com/question/27894549
#SPJ2
The conductance of the electric current through the electrolytic solution increases with
a)decrease in dilution
b)increase in dilution
c)increase in concentration
d)low degree of ionization
The conductance of the electric current through the electrolytic solution increases with increase in concentration.
What is an electrolytic solution?An electrolytic solution is a solution containing dissolved electrolyte.
The ions of the electrolyte dissociate and are able to carry electric current around the electrolytic cell.
The higher the concentration of the electrolyte, the more electric current it can conduct due to greater number of ions present.
Therefore, the conductance of the electric current through the electrolytic solution increases with increase in concentration.
Leran more about electrolytes at: https://brainly.com/question/1961090
#SPJ1
If someone asked you to mix up a bag of ringers solution with 150 meq/l of na , 10 meq/l of k , 8 meq/l of ca2 , and 197 meq/l of mg2-, how many grams of mg2- would you add to the mixture?
The normality is the ratio of the equivalent to the volume of the solvent. To the mixture, 1.182 gms of magnesium should be added.
What is Normality?Normality (N) is the grams or moles of solute per liter of solution.
Magnesium has 2 valence electrons in the outermost shell so,
1 mEq of Mg⁻² ions = atomic number of Mg ÷ valence electron
= 12 ÷ 2
= 6 mg
In a liter solution having 197 meq/l of Mg⁻²:
197 meq/l of Mg⁻² × 6 = 1182 mg
Therefore, 1.182 gms of magnesium ions should be added to the mixture.
Learn more about gram equivalents here:
https://brainly.com/question/14833835
#SPJ4
A chemical reaction can be reversed if?
The energy of the products exceeds the activation energy threshold.
The energy of the reactants exceeds the activation energy threshold.
The energy of the products is less than the activation energy threshold.
The energy of the reactants is less than the activation energy threshold.
Chemical reaction can be reversed if the energy of the reactants is less than the activation energy threshold.
What is a reversible reaction?A reversible reaction is a reaction in which the conversion of reactants to products and the conversion of products to reactants occur simultaneously.
Conditions for reversible reactionIn equilibrium reaction, the activation energy of the forward reaction is more than that of backward reaction which causes bond breakage of the reactants.
Activation energy = (Threshold energy) - (Internal energy of the reactants)
Thus, a chemical reaction can be reversed if the energy of the reactants is less than the activation energy threshold.
Learn more about reversible reaction here: https://brainly.com/question/16614855
#SPJ1
What do esters aldehydes and ketones all have in common? (Look back at
table R and be specific!)
What is the speed of light written in standard numerical form?
2H2O + 3HCl ——> 5H2O + Cl
how many moles of H2O are needed to make 3 moles of HCl?
Answer: 2 moles
Explanation:
We know from the equation that for every 3 moles of HCl consumed, 2 moles of water are consumed (based on the coefficients)
So, the answer is 2 moles.
Scientists made the following two observations about emission spectra: each element has a unique emission spectrum. atoms emit energy only at specific wavelengths. describe how the bohr model explains both of these observations.
In this model, electrons are found on unique levels and when jumping from one level to another, electrons emit light at a specific wavelength.
What is the Bohr model?The Bohr model is an atomic model describing the properties of atoms and their constituents (electrons).
This model states different atoms have specific levels of energy where electrons can be located.
In conclusion, in this model, electrons are found on unique levels and when jumping from one level to another, electrons emit light at a specific wavelength.
Learn more about the Bohr model here:
https://brainly.com/question/18002213
#SPJ1
Answer:
In the Bohr model, electrons can exist only in certain energy levels surrounding the atom. The energy levels in each atom are unique. When electrons jump from a higher energy level to a lower one, they emit light at a wavelength that corresponds to the energy difference between the levels.
Explanation:
Ed22
how to Use your trend line to estimate the gas pressure of this system at 0°C.
Answer:
The slope of the trend line is 2.55; as the temperture.
Explanation:
In a certain reaction at stp, 29.2 l of methane is combusted
with 63.3 l of oxygen.
what volume of excess reactant remains after the reaction is
complete?
The volume of excess oxygen will 2.28 L
Stoichiometric calculationFrom the equation of the reaction:
[tex]CH_4(g) + 2O_2(g) --- > CO_2(g) + 2H_2O(g)[/tex]
The mole ratio of the two reactants is 1:2.
1 mole of gas at STP = 22.4 L
Mole of 29.2 L of methane at STP = 29.2/22.4 = 1.3 moles
Mole of 63.3 L of oxygen at STP = 63.3/22.4 = 2.8 moles.
Thus, oxygen is in excess because 1.3 x 2 = 2.6 moles is needed to react with 1.3 moles methane.
Excess mole of oxygen = 2.8 - 2.6 = 0.2 moles
Volume of 0.2 moles at STP = 22.4 x 0.2 = 2.28 L
More on stoichiometric calculations can be found here: https://brainly.com/question/27287858
#SPJ1
Part g
consider the melting points of sugar and salt, as well as the states of sugar, salt, and oil
at room temperature. what can you conclude about the attractive forces between
particles in the three substances?
Salt and sugar have strong attractive forces whereas oil has weak attractive forces between particles.
What type of attractive forces present in salt, sugar and oil?The attractive forces between particles in the salt and sugar substances have strong because of its solid state while on the other hand, the attractive force between particles of oil is weak because of its liquid state.
So we can conclude that salt and sugar have strong attractive forces whereas oil has weak attractive forces between particles.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
The strength of the attractive forces between the molecule of oil, sugar and salt increases from oil to sugar to salt.
What is melting point of a substance?The melting point of a substance is the temperature at which the solid substance melts.
The melting point of a substance is a constant for a pure substance.
The higher the attractive forces between the molecules of a substance, the higher the melting point will be.
Between the three substances, oil has the lowest melting point while salt has the highest melting point.
Therefore, the strength of the attractive forces between the molecule of oil, sugar and salt increases from oil to sugar to salt.
Learn more about melting point at: https://brainly.com/question/40140
#SPJ1
Which of the following statements holds true for a chemical change?
A.
In a chemical change, no new substance is formed.
B.
In a chemical change, a substance changes its phase.
C.
In a chemical change, the molecular structure of a substance changes.
D.
In a chemical change, one substance dissolves into another.
A solvent is added to dissolve only one mixture component and then the liquids are separated. Choose... A liquid is carefully poured out, leaving the solid behind in the container. Choose... A solid is caught on paper or a membrane while the liquid passes through. Choose... A solid mixture is heated. One component transitions directly between solid and gas. Choose...
The solid would be caught on a filter paper or membrane while the liquid passes through.
FiltrationFiltration is used to separate a mixture of insoluble substances in a liquid.
Since the aim is to separate the insoluble component of the mixture from the liquid, filtration using a suitable filter paper or membrane will be the way out.
The liquid will pass through the filter paper or the membrane while the insoluble component will be caught. This can then be dried and collected accordingly.
More on filtration can be found here: https://brainly.com/question/12674010
#SPJ1
Why is it important to convert into units of kelvin before using the ideal gas law?.
if 4.50 mol of ethane, c_(2)h_(6),undergo combustion according to the equation below , how many moles of oxygen are required? 2C_(2)H_(6)+7O_(2 )->4CO_(2)+6H_(2)O
15.75 moles of oxygen is required for 4.5 mole of ethane.
What is a Combustion Reaction ?The reaction in which a fuel gets oxidized by an oxidizing agent is called a Combustion Reaction , releasing a large amount of energy is called Combustion Reaction.
It is given in the question that
4.50 mole of ethane undergoes Combustion
2C₂H₆ + 7O₂ -> 4CO₂ +6H₂O
Mole fraction of ethane to oxygen is 2:7
Moles of ethane = 4.5
4.5 /x = 2/7
4.5 * 7 / 2 = x
x = 15.75 moles.
Therefore 15.75 moles of oxygen is required for 4.5 mole of ethane.
To know more about Combustion Reaction
https://brainly.com/question/12172040
#SPJ1
Common Tasks for Chemists.
Answer:
analysis organic and inorganic compounds,refine substances and chemicals products
Balance the following redox reaction if it occurs in acidic solution. What are the coefficients in front of h2c2o4 and h2o in the balanced reaction? mno4⁻(aq) h2c2o4(aq) → mn2 (aq) co2(g)
The balanced redox reaction, if it occurs in acidic solution, is
5C₂O₄²⁻(aq) + 2MnO₄⁻(aq) + 16H⁺-----> 10CO₂(g) + 2Mn²⁺(aq) + 8H₂O(l)
What are redox reaction?Redox reactions are those in which loss and again of electrons occur.
To balance the redox reaction, we must first break the whole reaction into half equations;
Oxidation half equation
[tex]\rm 5C_2O4^2^-(aq) + 10e + 8H^+----- > 10CO_2(g) + 4H_2O(l)[/tex]
Reduction half equation
[tex]\rm 2MnO_4^- (aq) + 10e + 8H^+----- > 2Mn^2+(aq) + 4H_2O(l)[/tex]
Now combine both the reactions
[tex]\rm 5C_2O_4^2-(aq) + 2MnO4^- (aq) + 16H^+----- > 10CO_2(g) + 2Mn^2+(aq) + 8H_2O(l)[/tex]
Thus, the coefficient of H₂C₂O₄ is 5 and that of water is 8.
Learn more about redox reactions
https://brainly.com/question/13293425
#SPJ4
What happens when a solid is dissolved into a liquid?
Answer:
The solid has broken down into pieces so small that its particles spread all throughout the new mixture.