Answer:
4 cups?
Explanation:
Which two nuclides are isotopes of the same element
Answer:
1940K and 1939K Isotopes are two forms of the same element that have different numbers of neutrons in the nucleus. This means same symbol, and same atomic number (subscript), but different mass number (superscript).
Could really use a few pointers on this question!
From the calculations, we can see that the theoretical yiled of NO2 is 100L of NO2
What is the theoretical yield?The theoretical yield is that calculated from the stoichiometry of the reaction.
We can see that 1 mole of O2 produced 2 moles of NO2. Thus;
2.23 moles of O2 will produce 4.46 moles of NO2
Since 1 mole of NO2 occupies 22.4 L
4.46 moles of NO2 occupies 100L of NO2
Learn more about theoretical yield:https://brainly.com/question/14966377
#SPJ1
A sample of gas is collected in a flask with a volume of 267 mL at a pressure of 771 mmHg and a temperature of 21C. If the mass of the gas is 1.05 g, what is the molar mass of the gas?
Answer:
M=93.5g/mol
Explanation:
I did this in class and it was a review. :)
Convert 3.80 mol of KCI to grams?
Answer:
283 grams KCl
Explanation:
To convert form moles to grams, you need to find the molar mass of your compound. The molar mass can be calculated using the individual molar masses of each element in the compound. These values can be found on the periodic table.
Molar Mass (K) = 39.098 g/mol
Molar Mass (Cl) = 35.453 g/mol
Molar Mass (KCl) = 39.098 g/mol + 35.453 g/mol
Molar Mass (KCl) = 74.551 g/mol
Now that you know the molar mass, you want to multiply it by the moles of KCl. This is possible because the molar mass is actually a ratio representing the relationship of grams and moles. In KCl, there are 74.551 grams of KCl for every 1 mole of KCl. When you are multiplying, make sure you set the ratio up in a way that allows for the units to cancel out and leave grams as your final answer.
3.80 moles KCl 74.551 g
----------------------- x ------------------- = 283 grams KCl
1 mole KCl
The final answer should have 3 sig figs because the value the problem gave (3.80 mol) also has 3 sig figs.
The enzyme provided is a stock solution which should be diluted 50-fold with 0.001M HCl immediately before use.
Enzyme :1mg/ml chymotrypsin A in 0.001M HCl
How do I work out this calculation, if I want the 5ml of the diluted enzyme?
In order to prepare a 50-fold diluted enzyme, 0.1 mL of the stock solution of the enzyme is taken and made up to 5.0 mL with 0.001M HCl.
What is dilution?Dilution is a process whereby a solution of lower concentration is prepared from one of a higher concentration.
Dilution is done by using the dilution formula below:
C1V1 = C2V2C1; Initial concentration of enzyme = 1 mg/mL
C2; Final concentration of enzyme = 1/50 mg/ml = 0.02 mg/ml
V1; Initial volume of enzyme = y
V2; Final volume = 5.0 ml
V1 = C2V2/C1
V1 = 0.02 * 5/1 = 0.1 mL
Therefore, in order to prepare a 50-fold diluted enzyme, 0.1 mL of the stock solution of the enzyme is taken and made up to 5.0 mL with 0.001M HCl.
Learn more about dilution at: https://brainly.com/question/24881505
#SPJ1
How many grams of KNO3 are required to prepare 0.250 L of 0.70 M solution?
Answer:
about 3
Explanation:
just did this for the points just being honiest
FLAG A nurse is preparing to administer morphine 0.05 mg/kg intermittent IV bolus to a newborn who weighs 3 kg. Available is morphine 0.5 mg/mL injection. How many mL should the nurse administer? (Round the answer to the nearest tenth. Use a leading zero if it applies. Do not use a trailing zero.)
The quantity of morphine, the nurse should administer is 0.3 ml.
What is morphine?Morphine is a drug which comes under the pain relieving drugs.
The quantity of morphine is 0.05 mg/kg
The weight of the baby is 3 kg.
Available morphine is 0.5 mg/mL.
0.05 x 3 = 0.15 mg
then, 0.15 mg / 0.5 = 0.3
Thus, the quantity of morphine, the nurse should administer is 0.3 ml.
Learn more about morphine
https://brainly.com/question/10665765
#SPJ1
A The weak base ionization constant (Kb) for CH3NH2 is equal to: B [CH3NH3+][OH-] [CH3NH₂] [CH3NH3 +][OH [CH3NH2][N2 O]
The weak base ionization constant (Kb) for [tex]CH_3NH_2[/tex] is equal to
[tex]Kb = [CH_3NH^{3+}] [OH^-] / [CH_3NH_2][/tex]
What is Kb?Kb is the base dissociation constant.
The expression for the equilibrium constant, Kb is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.
[tex]CH_3NH_2(aq) + H_2O(l)[/tex] → [tex]CH_3NH^{3+}(aq) + OH^- (aq)[/tex]
Thus, the expression for the equilibrium constant, Kb fo the above reaction can be written as follow:
[tex]Kb = [CH_3NH^{3+}] [OH^-] / [CH_3NH_2][/tex]
Learn more about the Kb here:
https://brainly.com/question/9040743
#SPJ1
What is the conjugate base of CH3COOH in the reaction below?
CH₂COOH(aq) + H₂O(/) — H₂O¹(aq) + CH₂COO¯(aq)
O A. H₂0
OB. CH3COO
О с. он-
OD. H30+
Answer: B. [tex]\text{CH}_{3}\text{COO}^{+}[/tex]
Explanation:
To find the conjugate base, you add a hydrogen ion and add 1 to the overall charge.
CH[tex]_3[/tex]COO⁻ is the conjugate base of CH[tex]_3[/tex]COOH in the given reaction. Therefore, the correct option is option B.
What is conjugate base?Conjugate acids and bases are ideas included in the Bronsted-Lowry acid-base theory. An acid losses a hydrogen ion as it splits into its electrons in water. The conjugate base of the acid is the species that results.
A conjugate base comprises the base participant, X-, of two compounds that convert into one another by acquiring or losing a proton, according to a more comprehensive definition. In a chemical process, the conjugate base has the capacity to either gain and absorb a proton. The proton and hydrogen is given away in the process by the conjugate acid. CH[tex]_3[/tex]COO⁻ is the conjugate base of CH[tex]_3[/tex]COOH in the given reaction.
Therefore, the correct option is option B.
To know more about conjugate base, here:
https://brainly.com/question/30225100
#SPJ7
What most likely happens when water vapor cools?
It changes into gas.
It changes into liquid.
Its temperature increases.
Its temperature remains constant.
Answer:
hello :)
Explanation:
Water vapor in the air reaches its dew point as it cools in the air around the can, forming liquid drops of water. Condensation is the process where water vapor becomes liquid.
3) The following reaction produces chlorine molecules:
Energy + HCl (g) + CINO3 (8) Cl₂ (8) + HNO3 (8)
a) Describe 4 ways you could increase the concentration of chlorine molecules.
b) How would cooling shift the equilibrium of this reaction?
The 4 ways to increase the concentration of chlorine molecules is listed below and the reaction will go into reverse if cooled.
What is Le Châtelier’s principle ?
Le Châtelier's principle states that if a dynamic equilibrium is disturbed by changing the conditions, the position of equilibrium shifts to counteract the change to reestablish an equilibrium.
Energy + HCl (g) + ClNO₃ ⇄ Cl₂ + HNO₃
a. So in this reaction when at equilibrium , To increase the concentration of Chlorine molecules
1. An increase in Temperature will favour the formation of Chlorine molecules.
2. Decrease in concentration of Chlorine , or partial removal of Chlorine will result the equation to go in forward direction.
3.An Increase in the concentration of HCl will favour formation of Chlorine molecules.
4.An Increase in the concentration of CINO₃ will also favour formation of Chlorine molecules.
b. The cooling would shift the reaction into backward direction as it is an endothermic reaction in forward state.
To know about reaction Le Châtelier’s principle
https://brainly.com/question/12099569
#SPJ1
with strong heating calcium carbonate undergoes thermal decomposition how many mole of CaCO3 are there in 50g of calcium carbonate
Answer:
a)CaCO 3→CaO+CO 2CaCO3→CaO+CO2
b) Moles of CaCO3=4.37moles
c) I) Mass of calcium oxide =28g
ii)Mass of carbon dioxide=16.7g
iii)Volume=203cm3
What does a negative AH for a molecule mean?
A. Energy was released when the molecule was formed from its
elements.
B. Energy was added when the molecule was formed from its
elements.
C. Energy was added when the molecule changed phases.
D. Energy was released when the molecule went through a phase
change.
A negative enthalpy (ΔH)for a molecule means energy was released when the molecule went through a phase change.
What is change in enthalpy (ΔH)?The enthalpy change of a reaction is the amount of heat absorbed or released as the reaction takes place.
Also, the amount of energy required to change the phase of a material is known as the enthalpy,
A negative enthalpy entails the amount of energy released during an exothermic reaction.
Thus, a negative enthalpy (ΔH)for a molecule means energy was released when the molecule went through a phase change.
Learn more about enthalpy here: https://brainly.com/question/14047927
#SPJ1
2. Calculate the mass, in grams, for 3.47 moles of each of the following:
a. lead(II) acetate
b. sodium chloride
Explanation:
1 moles Lead(II) Acetate to grams = 325.28804 grams
3.47 moles Lead(II) Acetate to grams = 325.28804 ×3.47 grams=1128.749 grams
1 moles sodium chloride to grams=58.5 grams
3.47 moles sodium chloride to grams=58.5×3.47 grams
=202.995 grams
The radius of a single atom of a generic element X is 169 picometers (pm) and a crystal of X has a unit cell that is body-centered cubic. Calculate the volume of the unit cell.
The volume of the unit cell is 2.67 x 10⁻²⁸ m³.
What is the volume of a unit cell of a body-centered cubic crystal?In a body-centered cubic unit cell, the volume occupied by the particles of the substance is about 68% of the total unit cell.
Assuming that a single atomic a sphere, the volume is:
Volume(atom) = 4/3 x π x r³
Volume(atom) = 4/3 x π x (169 x 10⁻¹²)³
Volume(atom) = 2.02 x 10⁻²⁹ m³
There are a total of 9 atoms in a body-centered unit cell, so the total volume occupied by atoms is:
2.02 x 10⁻²⁹ x 9
= 1.82 x 10⁻²⁸ m³
Volume of cell = (1.15 x 10⁻²⁸ ) / 0.68
Volume of cell = 2.67 x 10⁻²⁸ m³
Therefore, the volume of the unit cell is 2.67 x 10⁻²⁸ m³.
Learn more volume of unit cells at: https://brainly.com/question/1594030
#SPJ1
ASAP 100 POINTS Which molecules carries instructions for inherited traits
A.DNA
B CARbohydrate
C.Protein
D.Lipid
Answer:
A.DNA
Explanation:
Ahaa Its gona be right
Answer:
D.N.A.
Explanation:
Hi student! Let me help you out on this question.
D.N.A. is the molecule which carries instructions for inherited traits.
[tex]\therefore,Option\quad A \quad is \quad correct[/tex]
Hope that this helped! have a good day ahead.
A lead ball is added to a graduated cylinder containing 50.6 ml of water, causing the level of the water to increase to 93.0 mL. What is the volume in milliliters of the lead ball, Vieras? Viead =
42.4 ml is the volume in milliliters of the lead ball if a lead ball is added to a graduated cylinder containing 50.6 ml of water.
What is a graduated cylinder?A tall narrow container with a volume scale is used especially for measuring liquids.
The graduated cylinder contains water
mL is a volume unit.
Water volume = 50.6 ml
The lead ball caused an increase in volume from 50.6 ml to 93.0 mL.
The new volume is the lead ball volume plus the original water volume :
Final volume = Vlead ball+ Water original volume
[tex]93.0 mL= V_(lead ball) +50.6 ml[/tex]
[tex]V_(lead ball) = 93.0 mL - 50.6 ml[/tex]
[tex]V_(lead ball) = 42.4 ml[/tex]
Hence, 42.4 ml is the volume in milliliters of the lead ball.
Learn more about the graduated cylinder here:
https://brainly.com/question/13386106
#SPJ1
The "iodine clock reaction" is a popular chemical demonstration. As part of that demonstration, the I−3 ion is generated in the reaction
S2O2−8(aq)+3I−(aq)⟶2SO2−4(aq)+I−3(aq)
In one trial, the unique rate of reaction was 6.93 μmol⋅L−1⋅s−1. What was the rate of reaction of iodide ions?
1. Initial Rate = _______ μmol⋅L−1⋅s−1 ??????
What was the rate of formation of sulfate ions?
2. Rate of formation = _______ μmol⋅L−1⋅s−1 ??????
In one trial, the unique rate of reaction was 6.93 μmol⋅L−1⋅s−1, the initial rate is 17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex] and rate of formation of sulfate ions was 11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
What is the rate of recation?Reaction rate, in chemistry, is the speed at which a chemical reaction proceeds.
[tex](S_2O_8)^-^2 (aq) + 3 I^-(aq)[/tex] → [tex]2 S0_4^-^2 (aq) + 3I^- (aq)[/tex]
Rate of the reaction = -Δ [[tex]S_20_8^-^2[/tex]] /Δ t = -1/3 Δ [[tex]I^-[/tex]] /Δ t
5.8 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex] = -1/3 Δ [[tex]I^-[/tex]] /Δ t
-Δ [[tex]I^-[/tex]] /Δ t =17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
So the rate of reaction of iodide ion =17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
+1/2Δ [[tex]S0_4^-^2[/tex]] /Δ t = rate of reaction
+1/2Δ [[tex]S0_4^-^2[/tex]] /Δ t = 5.8 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
+ Δ [[tex]S0_4^-^2[/tex]] /Δ t = 5.8 X 2 = 11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
Rate of formation of sulfate ions=11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
Hence, the initial rate is 17.4 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex] and rate of formation of sulfate ions was 11.6 μmol⋅[tex]l^-^1[/tex]⋅[tex]s^-^1[/tex]
Learn more about the rate of reaction here:
https://brainly.com/question/13228022
#SPJ1
the density of 190mg of a liquid is 0.0076g/cm calculate the volume in ml
[tex]\\ \rm\Rrightarrow Density=\dfrac{Mass}{Volume}[/tex]
[tex]\\ \rm\Rrightarrow Volume=\dfrac{Mass}{Density}[/tex]
[tex]\\ \rm\Rrightarrow Volume=\dfrac{0.19}{0.0076}[/tex]
[tex]\\ \rm\Rrightarrow Volume=25cm³[/tex]
[tex]\\ \rm\Rrightarrow Volume=25mL[/tex]
The specific heat of aluminum is approximately
0.90 J/g °C. How much heat energy would be
required to raise the temperature of a 50 g
sample of aluminum from 20 °C to 100 °C?
Answer:
3600J
Explanation:
Q = mc∆T
= 50 x 0.9 x (100 - 20)
= 3600J
Use the reaction and bond information to answer the question. H2 CO2 → CH2O2 Reactant bond energies: H–H is 432 kJ/mol, C=O is 799 kJ/mol Product bond energies: C–H is 413 kJ/mol, C=O is 745 kJ/mol, C–O is 358 kJ/mol, O–H is 467 kJ/mol How much energy must this system absorb before the reaction can begin?.
345678990098765435779999999999999999995699999
Please help.
Which organic product is formed in the reaction shown in the diagram?
The organic product formed in the reaction shown in the image would be bromoethane.
Substitution reaction in alkanesAlkanes, such as ethane undergoes a substitution reaction with halogens such as bromine to produce haloethanes.
For example, the equation of the reaction between ethane and bromine water is as below:
[tex]C_2H_6 + Br_2 --- > C_2H_5Br + HBr[/tex]
The products formed are bromoethane and hydrobromic acid.
More on substitution reactions in alkanes can be found here: https://brainly.com/question/16811879
#SPJ1
Helium occupies 293 mL at 788 Torr and 25C. If the sample is condensed into a 0.115 liter flask, what will the new pressure be, assuming constant temperature?
Answer:
=2007.69 Torr
Explanation:
The new pressure of helium gas assuming constant temperature is equal to 2007.69
Torr.
Given the following data:
Initial volume = 293 mL
Final volume = 0.115 L
Initial pressure = 788 Torr
Temperature = 25°C.
Conversion:
Initial volume = 293 mL to L = 293/1000=0.293L
To determine the new pressure assuming constant temperature, we would apply Boyle's law:
Mathematically, Boyle's law is given by the formula;
PV=K
P1V1=P2V2
Where;
P1 is the original (initial) pressure.
P2 is the final pressure.
V1 is the original (initial) volume.
V2 is the final volume.
Substituting the given parameters into the formula, we have;
788×0.293 = P2 × 0.115
230.884 = 0.115P2
P2 = 230.884/0.115
P2 =2007.69
the density (g/ml) of 6 pennies with a mass of 18.53 grams and a volume of 2.0 ml
Answer: 9.27 g/mL
Explanation:
[tex]d=\frac{m}{v}=\frac{18.53}{2.0}=\boxed{9.27 \text{ g/mL}}[/tex]
a 40 g sample of water absorbs 500 calories of energy, how much did the water temp changed?
2.99 °C is the change in temperature if a 40 g sample of water absorbs 500 calories of energy.
What is specific heat capacity?The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).
Given data:
m = 40 g
Q = 500 J
Specific heat capacity of water = 4.18 J/g°C
Change in Temperature =?
The formula for Heat Energy is given by:
Q = mcp∆T
where: Q - Heat Energy
m - mass
cp - specific heat
∆T = change in temperature, [tex]T_2 - T_1[/tex]
Solution:
Substituting the value of m, specific heat capacity of water and Q in the formula,
500 J = (40 g)(4.18 J/g°C)(∆T)
∆T = 2.99 °C
Learn more about the specific heat capacity here:
https://brainly.ph/question/7099790
#SPJ1
How do the valence electrons of an atom affect chemical reactions?
Answer:
Electrons of an atom can affect chemical reactions, because electrons have a negative charge, which can introduce a form of energy.
20.0 g of bromic acid, HBrO3, is reacted with excess HBr.
HBrO3 (aq) + 5 HBr (aq) → 3 H2O (l) + 3 Br2 (aq)
What is the theoretical yield of Br2 for this reaction? Round your answer to the nearest gram.
After Rounding off The percentage yield is 64%
What is Percentage Yield ?It is the ratio of actual yield to theoretical yield multiplied by 100% .
It is given in the question
20.0 g of bromic acid, HBrO3, is reacted with excess HBr.
The reaction is
HBrO₃ (aq) + 5 HBr (aq) → 3 H₂O (l) + 3 Br₂ (aq)
Actual yield = 47.3 grams
Molecular weight of Bromic Acid is 128.91 gram
Moles of Bromic Acid = 20/128.91 = 0.155 mole
Mole fraction ratio of Bromic Acid to Bromine is 1 :3
Therefore for 0.155 mole of Bromic Acid 3 * 0.155 = 0.465 mole of Bromine is produced.
1 mole of Bromine = 159.8 grams of Bromine
0.465 of Bromine = 74.31 grams of Bromine
Percentage Yield = (47.3/74.31)*100 = 63.65 %
After Rounding off The percentage yield is 64% .
To know more about Percentage Yield
brainly.com/question/22257659
#SPJ1
Answer:
74g
Explanation:
The other person had said that the Percentage Yield = (47.3/74.31)*100 = 63.65 %
So, since to find the percent yield you have to divide the actual yield by the theoretical yield, I would assume the theoretical yield is 74.31g (74g if you round to the nearest gram)
What is the equilibrium constant of a reaction?
A. It is the concentrations of products multiplied by the
concentrations of reactants.
о
B. It is the number of moles of reactants subtracted from the number
of moles of products.
C. It is the ratio of the concentrations of products to the
concentrations of reactants.
D. It is the ratio of the number of moles of products to the number of
moles of reactants.
Answer:
C. It is the ratio of the concentrations of products to the
concentrations of reactants.
Explanation:
What is the product of the unbalanced equation below?
H₂(g) + Cl₂(g) →
The Periodic Table
OA. H₂(g) + Cl₂(g)
OB. H₂Cl₂(9)
O C. HC1₂(g)
OD. HCI(g)
D
Explanation:
B/c both the hydrogen and chlorine have the same valance number so if a metal or non metal have the same valance number you should cancel out the numbers and you will have to put only the non metal or metals.
The parent element 42 19 K decays by beta decay. Which daughter element will
form?
O A. Ca
OB. 1 Ar
O C. C
OD. K
Answer: A
Explanation:
This means that the atomic number decreases by 1 but the mass remains constant, meaning the atomic number of the new element is 20. This corresponds to calcium.