a body covers a distance of 20 m in 2 second and then covers 40 metre in next it s8 on a straight line calculate its velocity​

Answers

Answer 1

Answer:

6 m/s

Explanation:

Average velocity = Total distance covered / Time taken to cover distance

Finding Average Velocity :

⇒ 20 m + 40 m / 2 s + 8 s

⇒ 60 m / 10 s

6 m/s

Answer 2
Velocity

a body covers a distance of 20 m in 2 second and then covers 40 metre in next it s8 on a straight line calculate its velocity.

Solution:

AV = 20m + 40m/s 2s + 8secondAV = 60m/s ÷ 10sAV = 6m/s²

So the Average velocity is 6m/s²


Related Questions

A car starts from rest and coasts down a hill with a constant acceleration.If it goes 90m in 8s,find the acceleration and velocity after 8s.​​​

Answers

speed or velocity= s/t => 90m/8s = 11.25 m/s => a= change in speed / change in time => 11.25 m/s / 8s = 1.4 m/s^2

Mr smith needs to put the paving stone dosnt to rest his arms. He does not want the paving stone to sink deep into the mud . Explain which surface of the stone he should put on the ground.

Answers

The surface of the stone which he should put on the ground is the base.

What is a Base?

This is defined as the flat end which is usually located at the bottom with a larger surface area.

The large surface area helps to distribute the forces on all parts thereby preventing it from sinking.

Read more about Base here https://brainly.com/question/9624014

#SPJ1

Calculate the current through the ammeter (look at photo)

Answers

Answer:

6 amps

Explanation:by Kirchhoff's loop rule the current at any point in the loop must be equal or charge would be building up. The current at the ammeter is equally to the total current through the sun of the paths in parallel which it is in series with

at what temperature does the fahrenheit scale read quartered the celsius scale ? what is the corresponding reading in kelvin scale ?

Answers

The temperature at which the Fahrenheit scale reads quartered the celsius scale is : -5.16 ⁰F, -20.64⁰C

Reading in kelvin scale = 252.5 K

Determine the temperature at which the Fahrenheit scale reads quartered the celsius scale

The relationship between Fahrenheit and celsius can be expressed as

F = (9/5)(C) + 32 ---- ( 1 )

Therefore the temperature at which Fahrenheit scale quarters the celsius scale is :

F = 1/4 C --- ( 2 )

Back to equation ( 1 )

1/4 C = (9/5)(C) + 32

1/4C - 9/5C = 32

C ( 1/4 - 9/5 ) = 32

C = 32 / ( 1/4 - 9/5  )

   = -20.64⁰C

F = 1/4 ( -20.64 ) = -5.16 ⁰F

Hence we can conclude that The temperature at which the Fahrenheit scale reads quartered the celsius scale is : -5.16 ⁰F, -20.64⁰C. Reading in kelvin scale = 252.5 K

Learn more about Fahrenheit scale : https://brainly.com/question/20716575

#SPJ1

Three sticks are arranged to form a right triangle. If the lengths of the three sticks are 0.47 m, 0.62 m and 0.78 m, what are the three angles of the triangle?

Answers

The angles in the triangle are 91 degrees, 53 degrees and 36 degrees respectively.

What is the cosine rule?

From the cosine rule we know that;

c^2 = a^2 + b^2 - 2abcosC

Since;

a = 0.47 m

b =  0.62 m

c =  0.78 m

Then;

(0.78)^2 = (0.47)^2 + (0.62)^2 - 2(0.47 * 0.62)cosC

0.61 = 0.22 + 0.38 - 0.58 cosC

0.61 - ( 0.22 + 0.38) = - 0.58 cosC

0.01 = - 0.58 cosC

C = cos-1(0.01/-0.58)

C = 91 degrees

Using the sine rule;

b/Sin B = c/Sin C

0.62/sinB = 0.78/sin 91

0.62/Sin B = 0.78

B = sin-1 (0.62//0.78)

B = 53 degrees

Angle A is obtained from the sum of angles in a triangle;

180 - (91 + 53)

A = 36 degrees

Learn more about triangle:https://brainly.com/question/2773823

#SPJ1

Kinetic energy is energy that is stored and not moving
O True
O False

Answers

the answer to this is that it is FALSE!

How much weight can be placed on the spring so that the end of the spring is 2m above the ground?

Answers

The weight must be 288N placed on the end of the spring when it is 2m from the ground.

What is gravitational potential energy?

If an object is lifted, work is done against gravitational force. The object gains energy.

Given is a spring has a spring constant of 48 N/m. The end of the spring hangs 8 m above the ground. The final height of weight above the ground, h =2m

Using Hooke's law, expressed as

Force, F = k (x₂-x₁).

Put the values, we get

F = 48 (8-2)

F = 288 N

This force applied on the spring is equal to the weight placed on the spring.

Weight W= 288N.

Thus, the weight must be 288N.

Learn more about gravitational potential energy.

https://brainly.com/question/3884855

#SPJ1

A marble rolls off a tabletop 1.15 m high and hits the floor at a point 4 m away from the tables edge in the
horizontal direction.
a. How long is the marble in the air?
b. What is the speed of the marble when it leaves the tables edge?
Im/s
C. What is its speed when it hits the floor?

Answers

A marble rolls off a tabletop 1.15 m high and hits the floor at a point 4 m away from the edge of the table in the horizontal direction,

t= 0.45 seconds.V=2.22m/sVT=4.95 m/s

This is further explained below.

What is its speed when it hits the floor...?

Generally, the equation for motion is mathematically given as

S= ut + 0.5at²

Therefore

y = Voy t + 0.5gt^2

1 = 0.5x 98 x 6²

1=4.9t^2

[tex]t=\sqrt{0.2041 }[/tex]

t= 0.45 seconds.

b) Horizontal motions are uniform.

V=Horizontal displacement/time

V=1/0.45

V=2.22m/s

C)

Vx: 2.22 m/s At bottom,

Vy² = Voy² + 2as

Vy² = 2x95x1

Vy² = 19.6

Total velocity

[tex]VT=\sqrt{( 2.22 m/)^2+19.6}[/tex]

VT=4.95 m/s

Read more about  Arithmetic

https://brainly.com/question/22568180

#SPJ1

WHOEVER ANSWERS FIRST WILL BE MARKED BRAINLIEST!
On the fret board the encircled ? represents which note
A. A flat
B. A sharp
C. C sharp
D. E Flat

Answers

Answer:

B. A sharp

Explanation:

The rubber band contains .......potential energy as it is stretched.

less

more

same

Answers

Answer:

elastic potential energy

You input potential (stored) energy into the rubber band system when you stretched the rubber band back. Because it is an elastic system, this kind of potential energy is specifically called elastic potential energy.

Explanation:

The radius of a nucleus is about 1/10000 that of an atom.

Calculate the radius of a magnesium nucleus.
Give your answer in standard form.

Answers

The radius of a magnesium atom is 0.160nm. The radius of a nucleus is about 1/10000 that of an atom.

What is nucleus?

The nucleus is an organelle that contains the DNA i.e. genetic material and other materials which is required for cellular processes. It is only found in eukaryotic cells that is responsible for controlling the processes of the cell.

So we can conclude that the radius of a magnesium atom is 0.160nm which is equals to about 1/10000 radius of that atom.

Learn more about radius here: https://brainly.com/question/24375372

#SPJ1

I need help with this question (open-ended question) 50 points (NO BOTS!!!)

Choose TWO locations below (A, B, C) and provide a two-sentence weather forecast for that location. Your forecast must include Wind direction, general wind speed (high, moderate, low) general temperatures (cold, cool, mild, warm, hot), and sky conditions(precipitation/stormy, sunny cloudy).

Answers

The weather forecast for the locations includes:

London - 21°C°, Precipitation: 60%, Humidity: 79%, Wind: 11 km/h.

New York - 26°C°, Precipitation: 50%, Humidity: 76%, Wind: 19 km/h.

What is weather?

It should be noted that weather is the state of the atmosphere with respect to heat or cold, calm or storm, clearness or cloudiness.

Weather forecast is an analysis of the state of the weather in an area with an assessment of the likely developments.

Learn more about weather on:

https://brainly.com/question/17922964

#SPJ1

Study the image.

Which of the following choices best explains how the lever made the task easier?

The final force on the rock was the same as the original force from the person and the distance the rock traveled was smaller than the original distance the lever moved, so the total work decreased.

The final force on the rock was greater than the original force from the person and the distance the rock traveled was smaller than the original distance the lever moved, but the total work remained the same.

The final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.

The final force on the rock was greater than the original force from the person and the distance the rock traveled was the same as the original distance the lever moved, so the total work increased.

Answers

The final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.

What is the law of conservation of energy?

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

The total work done on the process will be conserved.

The lever is a simple machine which makes work easier by reducing the force applied to the load and increasing the distance traveled by the load.

Thus, the final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.

Learn more about lever here: https://brainly.com/question/416386

#SPJ1

Spring constant here for 22 cm spring is 50 N per metre 840 if you stretch the spring and when is measured again is 32 cm long what is the size of this force

Answers

K= fx => f = k/x => 50N/100cm / 10 cm = 5/10= 0.5 N

Microscopes are used to study the structures of rocks. Over time, microscopes have become more and more powerful.

As a result of this technological improvement, our structural information of rocks

Answers

As a result this technological improvement, our structural information of rocks has improved greatly.

What is a petrographic microscope?

A petrographic microscope is a type of optical microscope that is used to identify rocks and minerals in very thin sections and also to investigate microscopic textures and features that are present in minerals and rocks.

This has improved greatly recent structural information about rocks.

Hence, microscopes used in the study of structures of rocks has overtime improved greatly our structural information about them

Learn more about structure of rocks here:

https://brainly.com/question/20151682

#SPJ1

Answer:

B is the correct answer.

Explanation:

According to the law of conservation of energy, which changes would INCREASE the total energy of a system?
A. An addition of 400 J of thermal energy and a loss of 550 J of kinetic energy
B. An addition of 200 J of thermal energy and a loss of 550 J of thermal energy
C. An addition of 300 J of GPE and a loss of 450 J of thermal energy
D. An addition of 500 J of kinetic energy and a loss of 450 J of thermal energy

Answers

The changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.

What is conservation of energy?

The term conservation of energy means that energy can not be created nor destroyed.

In this case, the changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.

Learn more about conservation of energy:https://brainly.com/question/2137260

#SPJ1

8. Ella wants to replace old bulbs of her home with new LED bulbs. She buys LED bulb that has inbuilt AC to DC converter of output 5V and 2.5A. a. If the LED is 75% efficient, what would be the power dissipated? b. Find the work done by the LED when it is connected to the power supply and left for 1hour 15 minutes.​

Answers

The power dissipated by the LED is 20 Watts and the work done for 1 hour 15 minutes is 56.25 kJ.

What is electrical power?

Electrical power is the rate at which electrical work is done.

Electrical power = voltage × current

The LED is 75% efficient means that 75% of power dissipated by the LED is converted to light.

Total power dissipated = 5 × 2.5 = 12.5 Watts

Work done = power × time (in seconds)

Work done = 12.5 × (1 × 3600 + 15 × 60)

Work done = 56250 J = 56.25 kJ

Therefore, the power dissipated by the LED is 20 Watts and the work done for 1 hour 15 minutes is 56.25 kJ.

Learn more about electrical power and work done at: https://brainly.com/question/23901751

#SP1

Why is digital forensics important?

Answers

Hi! digital forensics is important because not only does digital forensics allow cyber security organisations to develop technologies that can prevent hackers from accessing devices, websites and networks but can lead businesses in the direction of understanding exactly what data is compromised.

sketch an electric field pattern around two identical negative point charges shown below in the figure of class 11 model question physics.​

Answers

Answer:

fv nfv f n f vjrkfv frnv thrfn htrfn vt

Explanation:

v ntv tfrv tn vtv jr4v t5o vtv tv tv

A car of mass 500 kg is moving at a speed of 1.2 m/s. A man pushes the car, increasing the speed to 2 m/s. How much work did the man do?
A. 1360 J
B. 360 J
C. 640 J
D. 1000 J​

Answers

Answer:

Option B - 360 J

Explanation:

One of the formulas used to find out how much work was done is :

E = 0.5×m×v² (where m is the mass and v is the velocity)

Now we substitute values from the question and simplify :

E = 0.5×500×1.2²

E = 250×1.2²

E = 250×1.44

E = 360 J

So our answer is Option B

Hope this helped and have a good day

A duck has a mass of 2.70 kg. As the duck paddles, a force of 0.110 N acts on it in a direction due east. In addition, the current of the water exerts a force of 0.220 N in a direction of 47.0° south of east. When these forces begin to act, the velocity of the duck is 0.120 m/s in a direction due east. Find (a) the magnitude and (b) the direction (relative to due east) of the displacement that the duck undergoes in 2.70 s while the forces are acting. (Note that the angle will be negative in the south of east direction.)

Answers

a) The magnitude will be 0.838m

b) The displacement will be -17.35°

What is displacement?

The path covered by an object from its initial point to final point.

Forces acting on the duck

x-axis:    0.13 + 0.16*cos(-56°) = 2.7 * ax  

ax = 0.0813 m/s^2

y-axis:    0.13*sin(-56°) = 2.7 * ay  

ay = -0.0491 m/s^2

The displacement on the x-axis

X = Vox * t + ax/2 * t²

X = 0.12* 3.2 + 0.0813/2*3.2²

X = 0.8

The displacement on the y-axis:

Y = Voy * t + ay/2 * t²

X = 0 - 0.0491/2*3.2²

Y=-0.25m

So, the magnitude and angle of this displacement [0.8,-0.25] is:

0.838m  at an angle of -17.35°

For more displacement related question visit

https://brainly.com/question/11934397

#SPJ1

3. Two wires increase in length by the same amount when both their temperatures increase by the same amount, as shown in the diagram. Before the temperature increase, the longer wire is 1.2525 m long. The shorter wire’s linear coefficient of thermal expansion is 1.135 times that of the longer wire. How much shorter is the shorter wire before the temperature increase? Answer to three significant figures
Viết cho Ngọc Khánh

Answers

Two wires increase in length by the same amount when both their temperatures increase by the same amount, the shortness of the wire before the temperature increase is mathematically given as

dL=0.1485m

How much shorter is the shorter wire before the temperature increase?

Generally, the equation for change in length is mathematically given as

[tex]dl=lo \alpha dt[/tex]

Therefore

dl1=dl2

Where

a2=1.35a1

Hence

a1l1dt= a2l2dt

a1(1.2525)= a1*(1.135)(l2)

L2=1.104m

In conclusion, a change in length due to temperature is

dL=1.2525-1.104m

dL=0.1485m

Read more about Temperature

https://brainly.com/question/13439286

#SPJ1

ten-story building has identical stairs throughout its stairways. A student calculates the amount of work required to climb one set of stairs and the amount of work to climb the entire ten sets.


Which quantity will remain constant in this experiment?

Answers

Answer:

c

Explanation:

Discuss how wind energy was used in ancient times.

Answers

Answer:

People used wind energy to propel boats along the Nile River as early as 5,000 BC. By 200 BC, simple wind-powered water pumps were used in China, and windmills with woven-reed blades were grinding grain in Persia and the Middle East.

Explanation:

Hope it helps you:)))))

have a good day

Define 1 volt. Express it in terms of SI unit of work and charge calculate the amount of energy consumed in carrying a charge of 1 coulomb through a battery of 3 V.​

Answers

Answer:

Work done =3 joules

Explanation:

1 volt is the same as 1 Coulomb and 1 Joule

V=W/Q

1=W/3

W=3 x 1

W=3 Joules

Is the ability to discriminate between two close objects.

Answers

Answer:

resolution

Explanation:

  That is the definition of resolution

how much force is required to accelerate an 8.6kg wagon by 15 m/s ?

Answers

The amount of force required to accelerate the given mass of the wagon is 129 Newtons.

What is force?

A force is simply referred to as either a push or pull of an object resulting from the object's interaction with another object.

From Newton's Second Law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration.

Given the data in the question;

Mass of the rock m = 8.6kgAcceleration a = 15m/s²Force F = ?

F = 8.6kg × 15m/s²

F = 129kgm/s²

F = 129N

Therefore the amount of force required to accelerate the given mass of the wagon is 129 Newtons.

Learn more about force here: brainly.com/question/27196358

#SPJ1

Why is the contribution of the wavelets lying on the back of secondary wave front zero?​

Answers

Answer:

The contribution of the wavelets lying on the back of the wave front is zero because of something known as the Obliquity Factor. It is assumed that the amplitude of the secondary wavelets is not independent of the direction of propagation, Sources: byju's.com

According to the Voigt and Kirchhoff's law for wavelets, the contribution of a wavelet in any direction making an angle x with the normal to the wavelet is proportional to {1+cos(x)/2)}

For wavelet lying on the back of secondary wavefront,

x = 180°

→ So, the proportional factor:

→ {1+cos(180°)/2}

→ (1-1/2)

→ (0/2)

→ 0

That's why the contribution of the wavelets lying on the back of secondary wave front is zero

3. Harris is putting in a three-phase Y-Y-
connected transformer bank and the
secondary line-to-line voltage is 208 V.
What's the line-to-neutral voltage?
O A. 120 V
O B. 359 V
C. 69 V
O D. 240 V

Answers

120V is the line-to-neutral voltage .

What is Line Voltage ?

It is defined as the voltage of a power transmission circuit or distribution circuit up to the point of transformation or utilization.

The secondary line voltage is [tex]V_{L} = 280 V[/tex]

The notation AC indicates that the current is an alternating current.

The given formula is [tex]V_{ph} = \frac{V_{L} }{\sqrt{3} }[/tex]

Substitute  208 V into the formula

[tex]V_{ph} = \frac{V_{L} }{\sqrt{3} } \\\\V_{ph} = \frac{208V}{\sqrt{3} } \\\\= 120 (Approx)[/tex]

So, the line-to-neutral voltage is 120 V.

learn more about line voltage :https://brainly.com/question/22598217

#SPJ1

30 POINTS!!! how long must a 50 N force act on a 400 kg mass to raise its speed from 10 m/s to 12 m/s

Answers

Answer:

16 seconds

Explanation:

we want to find the acceleration first:

F = ma

50/400 = a

a = 0.125 m/s²

laws of motion formula:

vf = vi + at

12 = 10 + 0.125t

t = 16 seconds

hope this helps :)

Other Questions
The cylinder in a sphere have the same radius for the height of the cylinder is equal to the diameter of the spear select the expression that describes the volume of the cylinder that is not occupied by the sphere Find the third, fourth, and tenth terms of the sequence describe by the rule belowA(n)=3+(n-1)(-2)Please help ASAP, I need to get this done by midnight... any help is great find the missing length? The New Testament tell us the life and work of Jesus Christ and the beginning of the Church. True or false URGRENNTTT PLSS HELPP 50 POINTSS!!!!! Students were asked to simplify the expression cotangent theta plus tangent theta over cotangent theta. Two students' work is given.Student AStep 1: cotangent theta over cotangent theta plus tangent theta over cotangent thetaStep 2: 1 plus tangent theta over the quantity 1 over tangent theta end quantityStep 3: 1 + tan2 Step 4: sec2 Student BStep 1: the quantity 1 over tangent theta end quantity plus tangent theta over the quantity cotangent thetaStep 2: the quantity 1 plus tangent squared theta end quantity over tangent theta all over cotangent thetaStep 3: secant squared theta over tangent squared thetaStep 4: csc2 Part A: Which student simplified the expression incorrectly? Explain the errors that were made or the formulas that were misused. (5 points) The goal of emperor mitsuhito (Meiji) was to modernize Japan while maintaining Japanese culture this is an example How can using allusions strengthen a piece of writing?They soften a difficult piece of writing.They can create multiple analogies through description and thus create an emotional appeal.They can draw upon other texts and histories that the reader may know, in order to make a point.They can illustrate the breadth of knowledge of an author and thus make him reliable. hi people ~ can you give me eassy on WORLD AGAINST CHILD LABOUR I need 80 word I already write this but I want 80 word more please give me your own choice on WORLD AGAINST CHILD LABOUR thnks Find x, rounding to the nearest tenth (one decimal place) Question 310 pts1. Discuss the importance of learning about bereavement patterns in other cultures. Describe some ofthe manifest and latent functions of burial rites. (10 points) Given a line with slope = 6and passing through (5,9) , which of the following is the correct point-slope equation of the line? y9=6(x5 If you are not observant and spend too much time looking at your paper while drawing: A.you will begin to draw what you think you see instead of what you actually see. B.your drawing will not look as much like the original object or form. C. Both A and B. Select the correct answer.What would most likely help a person become a good geocacher?A. familiarity with rural settingsB. experience with technologyC. employment as a garbage collectorD. ability to work with animals if energy can neither be created nor destroyed, into what kinds of energy have these resources been transformed? William is writing a research question to drive his study about the difference between the USDA's recommendations regarding the consumption of dairy products andcurrent research on the subject.Which question is most effective for guiding William's research?Next question Why is political knowledge necessary for citizens? Read the excerpt from The Lottery.Bobby Martin had already stuffed his pockets full of stones, and the other boys soon followed his example, selecting the smoothest and roundest stones; Bobby and Harry Jones and Dickie Delacroixthe villagers pronounced this name "Dellacroy"eventually made a great pile of stones in one corner of the square and guarded it against the raids of the other boys.What type of descriptive language is used in the excerpt?figurative languagesensory detailsstrong verbsmetaphor 4x what = 364please put the calculation An employee is demonstrating behaviors on the job that may endanger other employees. His manager wants to refer him to the company's employee assistance program. Which situation would call for such a referral How do I know AM is congruent to segment CM?