Answer:b
Explanation:
Right
Plsss name this compound
Explanation:
It looks like 2,2,4-trimethylpentane.
Longest alkane chain contains 5 carbons. => -pentane
3 methyl groups on the 2nd, 2nd and 4th carbons.
The weight of an object is different on each planet because
O mass changes with location
O each planet has a different force of gravity
O each planet is a different distance from the sun
Omass of the object changes on each planet
Answer:
each planet has a different force of gravity
Explanation:
Weight = mass× gravity
As gravity changes from place to place and also from planet to planet so weight changes.
The subatomic particle that is different in isotopes
Answer:
Neutrons
Explanation:
Subatomic particles are components atoms, and they include protons, electrons and neutrons. In different isotopes of an atom, the number of neutrons that the atom contains is what changes.
I hope this helps!
Identify 3 characteristics that would be taken into consideration when evaluating any proposed site for a national repository of nuclear waste.
Answer:
Proximity to water bed/water sourceGeographical isolation and barriersunavailability of plant or any biosystemExplanation:
A nuclear repository would be required to be isolated with barriers in place to keep people out. Ideally, it should be stored underground and away from any underlying waterways, or biosystems so as to avoid contamination. A good example would be the proposed Yucca Mountain repository.
I hope this was helpful and useful.
The radioactive substance has a lot of distinction and variation and needs to be kept aside from the environment and it of reach for most nuclear power plants to discharge the gases.
There is various consideration that needs to keep in mind such as the size of the container, temperature of the gas, and amount of gas in the container. Other considerations include the closeness to water bed/water source, the locational isolation, and barriers , unavailability of plant or any biosystem in case of the nuclear wastes.Learn more about the characteristics that would be taken into consideration.
brainly.com/question/5562285.
(5) Use scientific notation, make the following conversions:
6.20 km to m
Answer:
6200 meters
Explanation:
To convert from km to m you have to multiply the number by a thousand
Answer:
6.2×10^3 m
Explanation:
6.20×1000=6200m
In scientific notation 6200 = 6.2×10^3
calculate the mass of Ag3AsO4 that would be produced if enough AgNO3 solution is added to precipitate all of the AsO43- in the 100.0 mL of the 0.1 M Na3AsO4 solution. Record this amount on your report sheet.
Answer:
5 g
Explanation:
Step 1: Write the balanced equation
3 AgNO₃(aq) + Na₃AsO₄(aq) ⇒ Ag₃AsO₄(s) + 3 NaNO₃(aq)
Step 2: Calculate the reacting moles of Na₃AsO₄
100.0 mL of 0.1 M Na₃AsO₄ react.
0.1000 L × 0.1 mol/L = 0.01 mol
Step 3: Calculate the moles of Ag₃AsO₄ formed from 0.01 moles of Na₃AsO₄
The molar ratio of Na₃AsO₄ to Ag₃AsO₄ is 1:1. The moles of Ag₃AsO₄ formed are 1/1 × 0.01 mol = 0.01 mol.
Step 4: Calculate the mass corresponding to 0.01 moles of Ag₃AsO₄
The molar mass of Ag₃AsO₄ is 461.61 g/mol.
0.01 mol × 461.61 g/mol = 5 g
Balance the following chemical equation: N2H4+O2→ NO2+H2O
Answer:
N2H4 + 3O2 → 2NO2 + 2H2O
Explanation:
3
Directions: Drag each tile to the correct box.
Three phases of waler are shown below.
Put the phases in order from fastest particle molion to slowest particle molion.
liquid water
>
steam
ice
Reset
Submit
Answer:
In order from fastest to slowest, Steam > Liquid Water > Ice
Explanation:
As temperatures rise, particles are allowed to move faster and more freely. If you think about the phases of matter, the more compact something is (solids), the less the particles are able to move. Taking the temperate of ice into consideration, the cold further restricts fast movement of particles, whereas gas (especially steam in this case), in hot temperatures, is able to move quickly and freely in the atmosphere.
What are 3 characteristics of all invertebrates
Answer:
None have backbones
No cell walls
Multicellular
Includes radial or bilateral body symmetry.
Explanation:
Fungus is an example of a/an-
A:tissue
B:cell type
C:organ
D:organism
Answer:
D.organism
Explanation:
A fungus from the kingdom fungi is an organism
Answer:
D. organism
......................
Which reaction is the opposite of a decomposition reaction?
Question 3 options:
Electrolysis of Water
Synthesis
Combustion
Explosion
Answer:
B) Synthesis reaction
Explanation:
synthesis reactions because they take apart larger molecules or compounds
Hope that helps
Potassium nitrate has been used with charcoal and sulfur for centuries to make gunpowder. Using the Periodic Table provided in Canvas, Modules, General Information, determine the molar mass for potassium nitrate (KNO3).
Answer:
101.10200
Explanation:
Identify the molar mass of K, N, and O on the periodic table
K = 39.0983
N = 14.0067
O3 = 15.999×3 = 47.99700
Add them all together
39.0983+14.0067+47.99700 = 101.10200
Predict the reactants of this chemical reaction. That is, fill in the left side of the chemical equation. Be sure the equation you submit is balanced. (You can edit both sides of the equation to balance it, if you need to.) Note: you are writing the molecular, and not the net ionic equation.
Answer:
Hydrogen chloride (HCl) and Calcium hydroxide (CaOH). (see balanced equation below)
Explanation:
In a neutralization reaction as is the case of the question (see attachment), an acid would be neutralized by a base to form salt and water.
The most plausible reactants for the reaction given the number of moles of the product, is therefore Hydrogen chloride (HCl) and Calcium hydroxide (Ca(OH)2).
[tex]HCl _{(aq)} + Ca(OH)_{2} _{(aq)}[/tex] →[tex]CaCl_{2}_{(s)} + H_{2} O_{(l)}[/tex]
Let me know if this was helpful.
A mixture of ethyne gas (C2H2) and methane gas (CH4) occupied a certain volume at a total pressure of 16.8 kPa. When the sample burned, the products were CO2 gas and H2O vapor. The CO2 was collected and its pressure found to be 25.2 kPa in the same volume and at the same temperature as the original mixture. What percentage of the original mixture was methane
Answer:
50%
Explanation:
Let assume that there are:
"a" moles of CH4 & "b" moles of C2H2
Then by applying the ideal gas equation:
PV = nRT
[tex]16.8 \times 10^3 \times V = (a+b)RT[/tex]
Make (a+b) the subject of the formula:
[tex](a+b) = \dfrac{16800 \ V }{RT} mol[/tex] --- (1)
Since 1 mole of CH₄ yields 1 mol of CO₂ & 1 mol of C₂H₂ yields 2 moles of CO₂
Then;
the total moles of CO₂ = (a +2b)
Now:
[tex]25.3 \times 10^3 \times V = (a+ 2b)RT[/tex]
[tex](a + 2b) = \dfrac{25200 \ V}{RT \ mol}[/tex] ---- (2)
∴
By solving the above equations
[tex]a = \dfrac{8400 \ V}{RT} \\ \\ b = \dfrac{8400 \ V}{RT}[/tex]
Hence, the estimate of the percentage of methane in the original mixture is:
[tex]= 100 \times \dfrac{a}{(a+b)}[/tex]
[tex]= 100 \times \dfrac{8400\dfrac{ \ V}{RT} }{8400\dfrac{ \ V}{RT} + 8400\dfrac{ \ V}{RT}}[/tex]
= 50%
If 10.88 moles of NH3 were produced, how many moles of N2 would be
required?
Answer:
5.44 moles of nitrogen required.
Explanation:
Given data:
Number of moles of NH₃ = 10.88 mol
Moles of N₂ required = ?
Solution:
Chemical equation:
N₂ + 3H₂ → 2NH₃
Now we will compare the moles nitrogen and hydrogen.
NH₃ : N₂
2 : 1
10.88 : 1/2×10.88 = 5.44mol
5.44 moles of nitrogen required.
8. As the temperature of a mixture increases, one part of the mixture may 2 points
melt while the other parts remain solid. *
True
Or
False
Answer:
It's false
Explanation:
Mixtures are always combinations of the same compounds that are at different states.
Calculate the Tidal Range
1 point
High
Tide
Level
(m)
0.66
Low
Tide
Level
(m)
-0.55
Tidal
Range
(m)
June 28
Explanation:
Tidal range is the difference of the mean high tide level and the mean low tide level.
=> Tide range = 0.66m - (-0.55m) = 1.21m.
Answer:
Tidal Change=0.66-(-0.55)=0.66+0.55 = 1.21 meters
1.21 m is the right answer.Explanation:
Tidal Change is the change in the mean high tide level and mean low tide level.
Tidal Change(m) =High tide level(m) - Low tide level(m)
How many grams of H2O are in 34.53 moles of H2O??
Answer:
m=621.54g
Explanation:
number of moles= mass of H2O/molar mass of H2O
n=m/mm
make mass the subject of the formula
m=n*mm
find molar mass of water
H2O=1(16)+2(1)
mm= 18.0g/mol. n=34.53mol
hence, m=34.53mol*18.0g/mol
m=621.54g
A certain chemical reaction releases of heat for each gram of reactant consumed. How can you calculate what mass of reactant will produce of heat
Answer:
Specific heat capacity formula
Explanation:
The heat capacity gives the exact heat energy at which a given mass of a substance is heated from one temperature to another.
This formula can help determine how much heat is gained or lost during the reaction and is given by:
Q = mcΔT
where:
Q = heat energy in Joules or Calories
m - mass of the substance (g)
c = Specific heat capacity (J/kg°C)
ΔT = change in temperature = (final temp - initial temp) (°C)
I hope this was helpful.
An arrow is fired at a target on a high wal. How does the energy change between the moment the arrow is fired and the
moment it hits the target?
O The potential energy and kinetic energy remain the same.
O The potential energy decreases as kinetic energy increases.
O The kinetic energy decreases as potential energy increases.
O The kinetic energy remains at zero, but potential energy increases.
Answer: answer is C on Edge
Explanation:
An arrow is fired at a target on a high wal. The energy change between the moment the arrow is fired and the moment it hits the target is the kinetic energy decreases as potential energy increases. The correct option is c.
What is energy change?Energy neither be created nor destroyed. It just only is transferred from one form to another form. This is called energy change. When any reactions happen, one form of energy is changed into another form.
There are many kinds of energy. These energies are kinetic energy, potential energy, gravitational energy, etc. Kinetic energy is the energy that is used when any work is done. Potential energy is the energy that is stored form of energy.
Therefore, the correct option is c, The kinetic energy decreases as potential energy increases.
To learn more about energy change, refer to the link:
https://brainly.com/question/22255429
#SPJ6
if 3.26 g is dissolved in enough water to make exactly 323 ml of solution, what is the molar cocentration of nitrate ion g
30 POINTS HELP Which idea was supported by Aristarchus, Copernicus, and Galileo?
The planets have epicycles.
The planets revolve around the Sun.
The stars rotate around the Sun.
The center of the solar system is Earth.
Answer:
SO SORRY it took so long but the answer is B :)
Explanation:
Trust me and good luck :)
The theory that the planets move around the sun was endorsed by Aristarchus, Copernicus, as well as Galileo. The solar system revolves around the sun.
What is Aristarchus?Aristarchus of Samos was just a Greek astronomer that suggested the very first heliocentric model of the cosmos, wherein the sun, rather than the earth, was even at its center. Despite the fact that his hypothesis was acknowledged by other philosophers of the time, it was dismissed as unrealistic, and the geocentric model remained in use for the next 1,700 years.
What is Copernicus?Copernicus was also the first to assert that the Earth as well as the other planets orbit the sun. It was really a significant shift in thinking.
What is sun?Sun can be considered as a star in solar system.
The theory that the planets move around the sun was endorsed by Aristarchus, Copernicus, as well as Galileo. The solar system revolves around the sun.
Therefore, the correct answer will be option (b).
To know more about Aristarchus and Copernicus
https://brainly.com/question/12401405#SPJ2
What is the wavelength of light emitted when the electron in a hydrogen atom undergoes transition from an energy level with n = 4 to an energy level with n = 2?
Answer:
[tex]4.86\times10^{-7}\ \text{m}[/tex]
Explanation:
R = Rydberg constant = [tex]1.09677583\times 10^7\ \text{m}^{-1}[/tex]
[tex]n_1[/tex] = Principal quantum number of an energy level = 2
[tex]n_2[/tex] = Principal quantum number of an energy level for the atomic electron transition = 4
Wavelength is given by the Rydberg formula
[tex]\lambda^{-1}=R\left(\dfrac{1}{n_1^2}-\dfrac{1}{n_2^2}\right)\\\Rightarrow \lambda^{-1}=1.09677583\times 10^7\left(\dfrac{1}{2^2}-\dfrac{1}{4^2}\right)\\\Rightarrow \lambda=\left(1.09677583\times 10^7\left(\dfrac{1}{2^2}-\dfrac{1}{4^2}\right)\right)^{-1}\\\Rightarrow \lambda=4.86\times10^{-7}\ \text{m}[/tex]
The wavelength of the light emitted is [tex]4.86\times10^{-7}\ \text{m}[/tex].
flourine is more reactive than chlorine . why ? with short reason.
Answer:
Electronegativity is probably the biggest thing that plays into reactivity. Therefore, since fluorine has a higher electronegativity than chlorine, fluorine is more reactive.
Explanation:
I got it right
How many moles of Aluminum are produced when34.2 g of alumina are broken down through the process of electrolysis
Answer:
0.670 mol
Explanation:
Step 1: Write the balanced reaction for the decomposition of alumina
2 Al₂O₃ ⇒ 4 Al + 3 O₂
Step 2: Calculate the moles corresponding to 34.2 g of Al₂O₃
The molar mass of Al₂O₃ is 101.96 g/mol.
34.2 g × 1 mol/101.96 g = 0.335 mol
Step 3: Calculate the moles of Al produced from 0.335 moles of Al₂O₃
The molar ratio of Al₂O₃ to Al is 2:4.
0.335 mol Al₂O₃ × (4 mol Al/2 mol Al₂O₃) = 0.670 mol Al
Which organisms are producers? (SELECT ALL THAT APPLY.)
grass
bear
human
oak tree
fungus
Answer:
Grass
Oak tree
Explanation:
Bear and human are definitely not and fungus are decomposers.
A 2.26 M solution of KOH is prepared. Calculate the moles and mass of solute present in a 15.2-mL sample of this solution. The molar mass of KOH is 56.11 g/mol.
Answer:
0.0344 moles and 1.93g.
Explanation:
Molarity is defined as the ratio between moles of a solute (In this case, KOH), and the volume. With molarity and volume we can solve the moles of solute. With moles of solute we can find mass of the solute as follows:
Moles KOH:
15.2mL = 0.0152L * (2.26mol / L) = 0.0344moles
Mass KOH:
0.0344 moles * (56.11g/mol) = 1.93g of KOH
What is the initial temperature under the beaker?
The initial temperature of water in the beaker is 20⁰C .
HELP ME PLEASE
Over time, which cell will look the smallest?
A student places four identical cells into four different
liquids
Cell
cell W
cell x
cell Y
cell z
W:Saltier than the cell
X:Less salty than the cell
Y:Equally as salty as the cell
Z:Pure water with no salts
Answer:
This description can be expressed as follows:
Y > W > XY>W>X
And,
W=ZW=Z
From these expressions we are able to find out that the saltiest cell description is Y, while the less salty is X.
Now, salt is well known as a dehydrating agent. In a process called osmosis cells placed in a salty liquid environment lose water, how?
Well, cells have a semipermeable membrane, in which some substances can get inside. Cells also have water inside. If a cell is placed in a quite salty liquid environment, salt will make the water inside the cells to come out, drying the cell and diminishing its size.
So, in this case, according to the expressions above, Cell Y will look the smallest, while cell X will look the biggest.
If we pour pure water in each liquid, the salt concentration will change and each cell will begin to grow bigger, but the saltiest cell will still be smaller than the others with less salt concentration.
Finally, to answer the question: Y cell will look the smallest after this processWhich of the following is the best example of a heat conductor?
A
a plastic cup
B
a wooden chair
C
a fabric potholder
D
a metal frying pan
Answer:
hope it helps you
Explanation:
i think is d