Write a program that prompts the user to enter a series of numbers between 0 and 10 asintegers. The user will enter all numbers on a single line, and scores will be separatedby spaces. You cannot assume the user will supply valid integers, nor can you assumethat they will enter positive numbers, so make sure that you validate your data. You donot need to re-prompt the user once they have entered a single line of data. Once youhave collected this data you should compute the following: • The largest value • Thesmallest value • The range of values • The mode (the value that occurs the most often) •A histogram that visualizes the frequency of each number Here’s a sample running of theprogram.

Answer:

The program in Python is as follows:

import collections

from collections import Counter

from itertools import groupby

import statistics

str_input = input("Enter a series of numbers separated by space: ")

num_input = str_input.split(" ")

numList = []

for num in num_input:

         if(num.lstrip('-').isdigit()):

                   if num[0] == "-" or int(num)>10:

                             print(num," is out of bound - rejecting")

                   else:

                             print(num," is valid - accepting")

                             numList.append(int(num))

         else:

                   print(num," is not a number")

print("Largest number: ",max(numList))

print("Smallest number: ",min(numList))

print("Range: ",(max(numList) - min(numList)))

print("Mode: ",end = " ")

freqs = groupby(Counter(numList).most_common(), lambda x:x[1])

print([val for val,count in next(freqs)[1]])

count_freq = {}

count_freq = collections.Counter(numList)

for item in count_freq:

         print(item, end = " ")

         lent= int(count_freq[item])

         for i in range(lent):

                   print("#",end=" ")

print()

Explanation:

See attachment for program source file where comments are used as explanation. (Lines that begin with # are comments)

The frequency polygon is printed using #'s to represent the frequency of each list element

Write a Java program named Problem 3 that prompts the user to enter two integers, a start value and end value ( you may assume that the start value is less than the end value). As output, the program is to display the odd values from the start value to the end value. For example, if the user enters 2 and 14, the output would be 3, 5, 7, 9, 11, 13 and if the user enters 14 and 3, the output would be 3, 5, 7, 9, 11, 13.

Suppose that a minus sign in the input indicates pop the stack and write the return value to standard output, and any other string indicates push the string onto the stack. Further suppose that following input is processed:
this parrot - wouldn't voom - if i put -- four thousand --- volts - through it -
What are the contents (top to bottom) left on the stack?
a. through wouldn't this.
b. this wouldn't through.
c. it through wouldn't.
d. it through volta.
e. volts through it.

When developing an algorithm to solve a problem, which of these steps can help you design the solution for the problem?

Why is it important to isolate evidence-containing devices from the internet?
To save the battery
To hide their location
Devices can be remotely locked or wiped if connected
It is not important to isolate the devices

Requirements description:
Assume you work part-time at a Cafe. As the only employee who knows java programming, you help to write an ordering application for the store.
The following is a brief requirement description with some sample output.
1. Selecting Breakfast or Lunch(5 points)
When the program starts, it first shows option Breakfast or Lunch. A sample output is as follows.
=== Select Breakfast or Lunch: ===
1. Breakfast
2. Lunch
You are supposed to validate the input.
If the user enters a letter or a number not between 1 and 2, the user will see an error message.
A sample output for invalid number is as follows.
Select Breakfast or Lunch [1, 2]: 0
Error! Number must be greater than 0.
Select Breakfast or Lunch [1, 2]:
2. Selecting Coffee (20 points)
When the program continues, it shows a list/menu of coffee and their prices, then asks a user to select a coffee by entering an integer number. A sample output is as follows.
=== Select Coffee: ===
1 Espresso $3.50
2 Latte $3.50
3 Cappuccino $5.00
4 Cold Brew $3.00
5 Quit Coffee selection
Select a coffee [1, 5]:
You are supposed to validate the input.
If the user enters a letter or a number not between 1 and 5, the user will see an error message.
A sample output for invalid number is as follows.
Select a coffee [1, 5]: 0
Error! Number must be greater than 0.
Select a coffee [1, 5]:
In your program, you can hard-code the information for coffee (i.e., coffee names and prices) shown above, such as "1 Espresso $3.50" and use the hard-code price, such as 3.50, for calculation of a total price of the order.
After the user makes a choice for coffe, such as 2 for Latte. The program continues asking for selecting a coffee so that the user can have multiple coffee orders. The user can enter "5" to quit coffee selection. A sample output is as follows.
=== Select Coffee: ===
1 Espresso $3.50
2 Latte $3.50
3 Cappuccino $5.00
4 Cold Brew $3.00
5 Quit Coffee selection
Select Coffee: [1, 5]: 2
=== Select Coffee: ===
1 Espresso $3.50
2 Latte $3.50
3 Cappuccino $5.00
4 Cold Brew $3.00
5 Quit Coffee selection
Select Coffee: [1, 5]: 5
3. Selecting Food (10 points)
After Coffee selection, the program shows food selection. A sample output is as follows.
=== Select Food: ===
1 Tuna Sandwich $10.00
2 Chicken Sandwich $10.00
3 Burrito $12.00
4 Yogurt Bowl $8.00
5 Avocado Toast $8.00
6 Quit Food selection
Select Food: [1, 6]: 1
Input validation is needed and works as before. Like Coffee selection which allows selecting multiple Coffee orders, food selection also repeats after the user enters a valid number between 1 and 5.
You hard-code the information for food shown above, such as "1 Tuna Sandwich $10.00" and use the hard-code price, such as 10.00, for calculation of the total price of the order.

PLEASE HELP ME ASAP ITS IMPORTANT

Who is MrBeast?
Answer the question correctly and get 10 points!

Complete the sentence.
In your program, you can open

write a object oriented c++ program

______allow you to select elements that are in a certain state, such as when the mouse if hovering over an element

Complete the Rectangle class. It has a rectangle's length and width as class variables and contains methods to compute its area and perimeter. If either parameter is negative, the method should calculate based on its absolute value. Then, you'll take user inputs to create an instance of Rectangle. For example, if you provide the input -13 7 You should receive the output Perimeter = 40.0 Area = 91.0 Note: It is NOT necessary to use the math module to calculate absolute value, though you may if you want. 298800.1775650.qx3zqy7 LAB ACTIVITY 28.4.1: Final Exam 2021 - Problem 4 of 6 0/10 main.py Load default template... 1 class Rectangle: _init__(self, length, width): # your code here 4 5 def area (self): 6 # your code here 7 8 def perimeter (self): 9 # your code here 10 11 if _name__ == '__main__': 12 1 = float(input) 13 w = float(input) 14 r = Rectangle(1, w) 15 print("Perimeter =', r.perimeter()) 16 print('Area =', r.area(), end='')|

com to enjoy dont give fkin lecture hsb-tnug-fyt​

Understanding Inner Joins
Which records would be returned in a query based on an inner join between a table named Customers and a table
named Orders? Check all that apply.
orphaned orders
orphaned customers
O customers who placed orders
customers who did not place orders
orders that are attached to customers
orders that are not attached to customers

How can technical writers help readers focus on important information in a set of instructions?
Technical writers can bring a reader's attention to important details in a set of instructions by ___.

1. adding an explanation and caution
2. using a highlighting technique
3. repeating the information
4. adding graphics to the introduction

what is a web client​

Write a recursive method named factorial that accepts an integer n as a parameter and returns the factorial of n, or n!. A factorial of an integer is defined as the product of all integers from 1 through that integer inclusive. For example, the call of factorial(4) should return 1 * 2 * 3 * 4, or 24. The factorial of 0 and 1 are defined to be 1. You may assume that the value passed is non-negative and that its factorial can fit in the range of type int. Do not use loops or auxiliary data structures; solve the problem recursively.

The project downloaded contains a package (folder) named Q1 within the src folder. Inside Q1 is a Java class named Questions. The purpose of Question 1 is to examine your understanding of loops and branching conditions. You should implement all of your code for this question in the main method of the Questioni class. While significant detail is provided below to be sure you undertand what is required, please note that the amount of code required to solve this question (Parts a-c) is less than 10 lines (total). In the Question1 class, you are given a line of code that generates a random number between 0 and 1. Math.random(): //generates number between 0 and 1 val
You are to create a loop which, in each iteration, generates a new random value, assigns it to val using the line provided and checks to see if that val is greater than 0.5. If val is greater than 0.5, a variable named counter should be incremented. The loop should continue this process (generate random value, check if it is greater than 0.5) until a total of three random numbers generated are greater than 0.5 (values do not have to be consecutive). You should also use the variable named numIterations, which is included for you, to track how many iterations of your loop were required for you to generate three random numbers greater than 0.5. A printin() statement is included for you that displays the value of numlterations. As an example of how the program should behave, if the following sequence of random numbers are randomly generated from your loop
0.3, 0.7,0.2, 0.6,0.9
then numIterations would equal 5 (the third value greater than 0.5 occured on the fifth iteration).
If
0.6, 0.8, 0.75
was the random sequence of numbers generated by your loop, then numlterations would equal 3 (the third value greater than 0.5 occured on the third iteration).
These are two examples to illustrate the scenario given in Question 1. Since at each iteration of your loop the number generated is random, the value of numIterations that your program observes may be any value greater than or equal to 3. Note that your program does not need to print out each of the random values that it generates. The steps to solve Question 2 are broken down as follows.
a. Implement a branching condition that increases the variable counter by 1 if val is larger than 0.5 1
b. Add a loop around the code created in Part a that continues until counter equals 3.
c. Use the variable numlterations to count how many times your loop iterates.

Write a program that lets the user enter the total rainfall for each of 12 months into a vector of doubles. The program will also have a vector of 12 strings to hold the names of the months. The program should calculate and display the total rainfall for the year, the average monthly rainfall, and the months with the highest and lowest amounts.

search for five ms excel terms
​

Write a function template that accepts an argument and returns its absolute value. The absolute value of a number is its value with no sign. For example, the absolute value of -5 is 5, and the absolute value of 2 is 2. Test the template in a simple driver program being sure to send the template short, int, double, float, and long data values.

Create a game that rolls two dies (number from 1 to 6 on the side) sequentially for 10 times (use loop). If at least once out of 10 times the sum of two random numbers is equal to 10, you win, else you loose. You will need to get your own method getRandom(int n) that generates a random number, see below (you can modify it as needed), a loop, and IF statement in the loop that checks if a sum of two random numbers is 10 or not.
Please start your program as follows, similar to what we did in class:
import java.util.Random;
public class UseRandom{
//your method getRandom() is here below, n is a range for a random number from 0 to n
public int getRandom(int n)
{
Random r=new Random();
int rand=r.nextInt(n);
return rand;
}
//code continues here, don't forget your main() method inside the class, and making your own object in main() using "new" keyword.

Write a function, stringify_digit that takes a single digit (integer) and returns the corre-sponding digit as a string. For example, stringify_digit(9) returns "9" and stringify_digit(0)returns "0". You may assume that only the digits 0 to 9 will be passed in as argumentsto your function. You may not use the str() function for this function.

Who first demonstrated the computer mouse?
O Microsoft
O Alan Turing
O Douglas Engelbart
O Apple, Inc.
FAST PLEASEEE THANK YOUUU

When determining the statement of purpose for a database design, what is the most important question to ask?
O Who will use the database?
O Should I use the Report Wizard?
O How many copies should I print?
O How many tables will be in the database?

Explain the difference between invention and innovation?

why do we install doorbells in our house

List any two programs that are required to play multimedia products
List any two programs that are required to create multimedia products​

NEED HELP IMMEDIATELY!!
What is the difference between a worm and a typical virus?
A) Worms are a type of spyware; viruses are a type of malware.
B) Worms are impossible to remove; viruses can be tracked and removed.
C) Worms are stronger than viruses; viruses are stronger than spam.
D) Worms travel independently of human action; viruses require human actions.

Explaining Invalid Data
what happens if date is entered in a feld without meeting the validation mal

What does the following code print?
// upload only .txt file ***************************************************** public class { public static void main(String[] args) { int x=5 ,y = 10; if (x>5 && y>=2) System.out.println("Class 1"); else if (x<14 || y>5) System.out.println(" Class 2"); else System.out.println(" Class 3"); }// end of main } // end of class.