Which two types of electromagnetic waves have higher frequencies than the waves that make up ultraviolet light?
o radio waves and infrared light
O visible light and X-rays
O microwaves and gamma rays
gamma rays and X-rays

Answer:

            T = reading (cm) time base (s / cm)

            f = 1 / T

Explanation:

An oscilloscope is a piece of equipment that allows you to visualize and measure a wave that reaches you, in the case of having a sonometer this transforms the sound wave into an electrical signal to be introduced through one of the voltage channels of the equipment, on the screen we will see the oscillating alternating signal, if it is fixed we can make the reading, if it is moving the time base and the trigger must be adjusted to stop it.

In the oscilloscope we can read the period of the signal, this is the time it takes for the signal to repeat itself with this value, we can calculate the frequency with the formula, for the reading of the period the distance is measured on the labeled screen and multiplied by the time base

            T = reading (cm) time base (s / cm)

            f = 1 / T

Answer:

15 J

Explanation:

Work = Force x Distance

15= 30 x 0.5

Have a blessed day!

Answer:Pravat did 15 J of work

Explanation:

Explanation:

this is the ans hope it works

Answer:

Forces make things speed up (or accelerate). When a force pushes or pulls the object, the object will move in the direction of the force. The bigger the force, and the lighter the object, the greater the acceleration.

Explanation:

The action from a force can cause an object to move or speed up (accelerate), to slow down (decelerate), to stop, or to change direction. Since any change in velocity is considered acceleration, it can be said that a force on an object results in the acceleration of an object.

A simple mathematical relationship exists between the mass of an object (m), the net force on the object (f) and its acceleration (a). The acceleration of an object is directly proportional to the net force and indirectly proportional to the object’s mass (a = f/m).

Answer: you ever get the awnser?

Explanation:

Answer: 0.12 g

Explanation: I got it right on the quiz.

Answer:

Option C

Explanation:

Given

Pressure = Force /Area

For any gas sample, force is defined as basically the force exerted by the gas molecules when they strike the surface (with in which they are contained) and bounce back.

Hence, Option C is the correct

Answer:

Due to wind and waves of water.

Explanation:

They wonder that the ball will float back to the beach because of the wind and the waves of the water. The wind blows towards the beach which moves the water in the form of waves towards the beach so if the ball lands in the water, it will floats on the surface of water and move towards the beach with the help of wind and waves of the sea. The ball floats on the water due to its lighter weight and lower density as compared to water.

Answer:

Provides an estimate of how many planets there are in our galaxy that may harbor technically communicative life-forms.

Explanation:

A planet can be defined as a large celestial body having sufficient mass to allow for self-gravity and make it assume a nearly circular shape (hydrostatic equilibrium), revolves in an orbit around the Sun in the solar system and has a cleared neighborhood.

Basically, the planets are divided into two (2) main categories and these includes;

I. Outer planets: these planets are beyond the asteroid belt and comprises of jupiter, saturn, uranus and neptune, from left to right of the solar system.

II. Inner planets: these planets are the closest to the sun and comprises of mercury, venus, earth and mars.

These outer planets are made mostly of gases (hydrogen and helium) causing them to be less dense than the solid inner planets. These gases are generally known to be less dense in terms of physical properties.

Some examples of the planet are Mars, Venus, Earth, Mercury, Neptune, Jupiter, Saturn, Uranus, etc.

The Drake equation provides an estimate of how many planets there are in our galaxy that may harbor technically communicative life-forms. It is a probabilistic mathematical expression.

Answer:

The correct answer would be:

B.

the number of communicating civilizations in the cosmos

#PLATOFAM

Have a nice day!

Explanation:

Given:

m1 = 0.55 kg

m2 = 0.45 kg

vi1 = +5.8 m/a

vi2 = -3.9 m/a

Solve for V

m1vi1 + m2vi2 = (m1 + m2)V

(0.55 kg)(+5.8 m/s) + (0.45 kg)(-3.9 m/s) = (0.55 + 0.45)V

V = +1.46 m/a

This means that the combined mass after the collision is moving to the right at 1.46 m/s

Answer:

(i) Please find attached the required velocity time graphs plotted with MS Excel

(ii) The velocity of vehicle A at the 18th second = 20 m/s

The velocity of vehicle B at the 18th second = 0 m/s

(iii) The distance between the two vehicles at the moment in (ii) above is 60 meters

Explanation:

The given parameters of the motion of vehicles A and B are;

The acceleration of vehicles A and B = Uniform acceleration starting from rest

The maximum velocity attained by vehicle A = 30 m/s

The time it takes vehicle A to attain maximum velocity = 10 s

The maximum velocity attained by vehicle B = 30 m/s

The time it takes vehicle B to attain maximum velocity = The time it takes vehicle A to attain maximum velocity = 10 s

The time duration vehicle A maintains its maximum velocity = 6 s

The time duration vehicle B maintains its maximum velocity = 4 s

(i) From the question, we get the following table;

[tex]\begin{array}{ccc}Time &V_A&V_B\\0&0&0\\10&30&40\\14&30&40\\16&30&20\\18&20&0\\22&0&\end{array}[/tex]

From the above table the velocity time graphs of vehicles A and B is created with MS Excel and can included here

(ii) The velocity of vehicle A at the start = 0 m/s

After accelerating for 10 seconds, the velocity of vehicle A = The maximum velocity of vehicle A = 30 m/s

The maximum velocity is maintained for 6 seconds which gives;

At 10 s + 6 s = 16 s, the velocity of vehicle A = 30 m/s

The time it takes vehicle A to decelerate to rest = 6 s

The deceleration of vehicle A, [tex]a_A[/tex] = (30 m/s - 0 m/s)/(6 s) = 5 m/s²

Therefore, we get;

v = u - [tex]a_A[/tex]·t

At the 18th second, the deceleration time, t = 18 s - 16 s = 2 s

u = 30 m/s

∴ v₁₈ = 30 - 5 × 2 = 20

The velocity of vehicle A at the 18th second, [tex]V_{18A}[/tex] = 20 m/s

For vehicle B, we have;

At the 14th second, the velocity of vehicle B = 40 m/s

Vehicle B decelerates to rest in, t = 4 s

The deceleration of vehicle B, [tex]a_B[/tex] = (40 m/s - 0 m/s)/(4 s) = 10 m/s²

For vehicle B, at the 18th second, t = 18 s - 14 s = 4 s

∴ [tex]v_{18B}[/tex] = 40 m/s - 10 m/s² × 4 s = 0 m/s

The velocity of the vehicle B at 18th second, [tex]v_{18B}[/tex] = 0 m/s

(iii) The distance covered by vehicle A up to the 18th second is given by the area under the velocity-time graph as follows;

The area triangle A₁ = (1/2) × 10 × 30 = 150

Area of rectangle, A₂ = 6 × 30 = 180

Area of trapezoid, A₃ = (1/2) × (30 + 20) × 2 = 50

The distance covered in the 18th second by vehicle [tex]S_A[/tex] = A₁ + A₂ + A₃

∴ [tex]S_A[/tex] = 150 + 180 + 50 = 380

The distance covered in the 18th second by vehicle [tex]S_A[/tex] = 380 m

The distance covered by the vehicle B in the 18th second is given by the area under the velocity time graph of vehicle B as follows;

Area of trapezoid, A₅ = (1/2) × (18 + 4) × 40 = 440

The distance covered by the trapezoid, [tex]S_B[/tex] = 440 m

The distance of the two vehicles apart at the 18t second, [tex]S_{AB}[/tex] = [tex]S_B[/tex] - [tex]S_A[/tex]

∴ [tex]S_{AB}[/tex] = 440 m - 380 m = 60 m

The distance of the two vehicles from one another at the 18th second, [tex]S_{AB}[/tex] = 60 m.

Answer:

5 kg

Explanation:

-----------------------------------------------------------------------------------------------------------------

When light strikes a black surface, it is reflected by the surface and

nothing is absorbed    This would be False because black absorbs the light not reflect

Mirrors are used in telescopes because they have the ability to reflect

True? Telescopes designed with mirrors avoid the problems of refracting telescopes. Because the light is reflected from the front surface only, flaws and bubbles within the glass do not affect the path of the light

Transmission in the passing of light through some materials​

False? Some materials allow much of the light that falls on them to be transmitted through the material without being reflected. Materials that allow the transmission of light waves through them are called optically transparent. ... Materials which do not allow the transmission of any light wave frequencies are called opaque.

Answer:

truuuuuuuuuuuuuuuuuuuuuuuuujuuuuuuuur

Answer:

true

Explanation:

I took a test this year and I know the answer

Answer:

chemical i think

I hope this helped

Both are false..........

Answer:

d.

galvanometer.

Explanation:

Galvanometer is the device which is used for measuring small currents due to changing magnetic field.

Answer: Diagram A

Explanation:

The Grand Canyon was created by the constant flow of the Colorado river which physically broke down the rock for billions of years. It then carried off the rock as it flowed and as it kept doing this, the canyon kept getting deeper and deeper.

This is what is described in the first diagram. The water from the faucet is carrying the soil along with it much like the Colorado did to the rocks of the Grand Canyon.

Answer:

The appropriate answer is "396 N/C".

Explanation:

The give values are:

Rectangular surface,

[tex]\Phi_e=396 \ N.m^2/C[/tex]

[tex]a = 2 \ m[/tex]

[tex]b = 1 \ m[/tex]

Angle,

[tex]\theta =\frac{\pi}{3} \ radian[/tex]

Now,

The area of rectangle (A) will be:

=  [tex]a\times b[/tex]

=  [tex]2\times 1[/tex]

=  [tex]2 \ m^2[/tex]

hence,

The electric field strength will be:

⇒  [tex]\Phi_e=E.A Cos \theta[/tex]

or,

⇒  [tex]E=\frac{\Phi_e}{ACos \theta}[/tex]

On putting the given values, we get

⇒      [tex]=\frac{396}{2\times Cos(\frac{\pi}{3} )}[/tex]

⇒      [tex]=\frac{396}{2\times 0.5}[/tex]

⇒      [tex]=\frac{396}{1}[/tex]

⇒      [tex]=396 \ N/C[/tex]

Answer:

55N

Explanation:

Using Newton's second law of motion:

F=ma

Force=mass × acceleration

F=25×2.2

F=55N

So 55 Newtons are needed

Answer:

4Al + 3O2 + heat ------> 2Al2O3

Explanation:

It is endothermic reaction.

Answer:

2.38 T

Explanation:

Since the number of coils and the change in time are both 1, I set it up as 3.57=1.50(x) and then solved for x to be 2.38 T.

Answer:

A and d

Explanation:

Mixture and solid

Answer: A is the correct answer :)

Explanation:

Answer:

After extensive, detailed calculation, contemplation, investigation, and consideration, my tentative guess is that the second choice is the correct one.

Answer:

Current = 0.33 Amperes

Explanation:

Given the following data:

Resistance = 12 ohm

Voltage = 4 v

To find the current;

Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.

Mathematically, Ohm's law is given by the formula;

Voltage = current * resistance

Substituting into the formula, we have;

4 = current * 12

Current = 4/12

Current = 0.33 Amperes

Answer:

100%

Explanation:

Father - EE

Mother - Ee