Answers
Answer:
option one
Explanation:
equilibrium is used to describe the point in which something meets in this case the temperature of an object
Related Questions
A 12-ohm resistor is connected in series with a 23-ohm resistor. They are placed across a 120-volt power source. What is the current in the circuit?
A) 35 amps
B) 10 amps
C) 5.2 amps
D) 3.4 amps
Answers
Answer:
3.43 A
Explanation:
Applying,
V = IR'.............. Equation 1
Where V = Voltage, I = current, R' = Total resistance
Make I the subject of the equation
I = V/R'........... Equation 2
From the question
Given: V = 120 volt, R' = (12+23) = 35 0hm
Substitute these values into equation 2
I = 120/35
I = 3.43 A
What is the law of conservation of energy?
a
Energy can be changed from one form to another
form but cannot be created nor destroyed.
b An object at rest tends to stay at rest.
C
The right answer is not given.
The change in energy is equal to the
d amount of heat added plus the amount of
work done
Answers
Answer:
The answer is A
The half-life of iodine-131 is 8 days. If a sample originally contains 0.96 g of the isotope, how much will remain after 24 days?
Answers
Answer: you ever get the awnser?
Explanation:
Answer: 0.12 g
Explanation: I got it right on the quiz.
Starting circuit One battery. 2 light bulbs in parallel; switch What is the voltage across the battery? What is the voltage across light bulb 1? What is the voltage across light bulb 2?
Answers
Answer:
The voltage across light bulb 1 and light bulb 2 is the the same i.e V
Explanation:
In a parallel circuit, the Voltage is same across all the components of the circuit and the current flowing through each component is added to get the total current across the circuit.
Let us say, the voltage across the circuit is V. The voltage across light bulb 1 and light bulb 2 is the the same i.e V
Does a battery produce electric currents?
Answers
Answer:
A battery is a device that stores chemical energy and converts it to electrical energy. The chemical reactions in a battery involve the flow of electrons from one material (electrode) to another, through an external circuit. The flow of electrons provides an electric current that can be used to do work.
The equation below is used to calculate the mechanical advantage of an ideal wheel and axle.
mechanical advantage =
wheel radius
__________
axle radius
A student compares two wheel-and-axle simple machines. Machine 1 has a wheel radius of 50 centimeters, and an axle radius of 10 centimeters. Machine 2 has a wheel radius of 100 centimeters, and an axle radius of 10 centimeters. What is true of these simple machines’ mechanical advantage?
A.
Machine 1’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 2.
B.
Machine 1’s mechanical advantage is greater, which means that this machine can move faster than Machine 2.
C.
Machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
D.
Machine 2’s mechanical advantage is greater, which means that this machine can move faster than Machine 1.
Answers
Answer:
b
Explanation:
Machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
Mechanical advantageThe term mechanical advantage is the ratio of the radius of wheel to the radius of the axle for a wheel and axle system.
The true statement about the two machines that were compared; 1 and 2 is that, machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
Learn more about mechanical advantage:https://brainly.com/question/16617083
#SPJ2
Question 4
The diagram represents the motion of a sound wave. The distance between points A and C is 9 meters (m), and it initially takes the wave 3 seconds (s) to travel.
What will be the wavelength of the sound wave if the velocity of the wave remains constant but the pitch is tripled?
A 3 meters
B 6 meters
с 9 meters
D 18 meters
Answers
Answer:A
Explanation:
The wavelength of the sound wave will be 3 meters.
What is wavelength?
The wavelength of any wave is defined as the distance between two max adjacent amplitudes, or the distance between two successive troughs or crest.
Now it is given that:
Distance =9 meters
time = 3 seconds
pitch=1/3 seconds
The velocity of the sound will be
[tex]V=\dfrac{d}{t}=\dfrac{9}{3}=3\ \frac{m}{s}[/tex]
Now from the question the wavelength of the sound wave if the velocity of the wave remains constant but the pitch is tripled
so [tex]f=3\times \dfrac{1}{3}=1 herts[/tex]
Now the velocity of the sound will be
[tex]v=f\times \lambda[/tex]
[tex]\lambda=\dfrac{v}{f}=\dfrac{3}{1}=3\ m[/tex]
Thus the wavelength of the sound wave will be 3 meters.
To know more about wavelength, follow
https://brainly.com/question/10728818
sheet of paper and a ball having same mass are dropped from the same height and obviously paper balls faster than a sheet of paper. what conclusion can be drawn from this acticity?
Answers
Answer:
In free fall, all items will fall at the same time. You were told that they have the same mass hence g×t which is constant.Find the equivalent resistance of this
circuit.
Ri
R2
1002
2002
R3
600 12
Answers
Answer:
63016
Explanation:
Ri+R2+R3 this is called series circuit
Answer:
200
Explanation:
100+200=300
1/300+1/600=200
Why is diffraction used in soil profiles?
Answers
Answer:X-ray diffraction (XRD) is the technique most heavily relied on in soil mineralogical analysis. X-ray diffraction is a technique that provides detailed information about the atomic structure of crystalline substances. It is a powerful tool in the identification of minerals in rocks and soils.
Explanation:
XRD is used to identify the minerals composing clay-rich, hydrothermally altered rocks that occur on several Cascade volcanoes. Such rocks are believed to play an important role in the generation of large landslides and mudflows. XRD is used to analyze saline minerals, including borates.
if the voltage across a 12 ohm resistor is 4.0 volts. the current through the resistor is?
Answers
Answer:
Current = 0.33 Amperes
Explanation:
Given the following data:
Resistance = 12 ohm
Voltage = 4 v
To find the current;
Ohm's law states that at constant temperature, the current flowing in an electrical circuit is directly proportional to the voltage applied across the two points and inversely proportional to the resistance in the electrical circuit.
Mathematically, Ohm's law is given by the formula;
Voltage = current * resistance
Substituting into the formula, we have;
4 = current * 12
Current = 4/12
Current = 0.33 Amperes
Two vehicles A and B accelerate uniformly from rest.
Vehicle A attains a maximum velocity of 30ms - in los
while B attains a maximum velocil) ol 40ms in the same
time. Both vehicles maintain these velocities for 6s belore
they are decelerated to rest in 6s and 4s respectively
Sketch on the same axes, velocity time graphs
for the motion of the vehicles
Calculate the velocity of each vehicle 18s aftur
the start. (VA
= 20ms -land vs
and vs = 20ms-')
How far will the two vehicles be from one
another during the moment in (ii) above?
(SA = 380m and SB
= 500m: SAB
120m). plz help
Answers
Answer:
(i) Please find attached the required velocity time graphs plotted with MS Excel
(ii) The velocity of vehicle A at the 18th second = 20 m/s
The velocity of vehicle B at the 18th second = 0 m/s
(iii) The distance between the two vehicles at the moment in (ii) above is 60 meters
Explanation:
The given parameters of the motion of vehicles A and B are;
The acceleration of vehicles A and B = Uniform acceleration starting from rest
The maximum velocity attained by vehicle A = 30 m/s
The time it takes vehicle A to attain maximum velocity = 10 s
The maximum velocity attained by vehicle B = 30 m/s
The time it takes vehicle B to attain maximum velocity = The time it takes vehicle A to attain maximum velocity = 10 s
The time duration vehicle A maintains its maximum velocity = 6 s
The time duration vehicle B maintains its maximum velocity = 4 s
(i) From the question, we get the following table;
[tex]\begin{array}{ccc}Time &V_A&V_B\\0&0&0\\10&30&40\\14&30&40\\16&30&20\\18&20&0\\22&0&\end{array}[/tex]
From the above table the velocity time graphs of vehicles A and B is created with MS Excel and can included here
(ii) The velocity of vehicle A at the start = 0 m/s
After accelerating for 10 seconds, the velocity of vehicle A = The maximum velocity of vehicle A = 30 m/s
The maximum velocity is maintained for 6 seconds which gives;
At 10 s + 6 s = 16 s, the velocity of vehicle A = 30 m/s
The time it takes vehicle A to decelerate to rest = 6 s
The deceleration of vehicle A, [tex]a_A[/tex] = (30 m/s - 0 m/s)/(6 s) = 5 m/s²
Therefore, we get;
v = u - [tex]a_A[/tex]·t
At the 18th second, the deceleration time, t = 18 s - 16 s = 2 s
u = 30 m/s
∴ v₁₈ = 30 - 5 × 2 = 20
The velocity of vehicle A at the 18th second, [tex]V_{18A}[/tex] = 20 m/s
For vehicle B, we have;
At the 14th second, the velocity of vehicle B = 40 m/s
Vehicle B decelerates to rest in, t = 4 s
The deceleration of vehicle B, [tex]a_B[/tex] = (40 m/s - 0 m/s)/(4 s) = 10 m/s²
For vehicle B, at the 18th second, t = 18 s - 14 s = 4 s
∴ [tex]v_{18B}[/tex] = 40 m/s - 10 m/s² × 4 s = 0 m/s
The velocity of the vehicle B at 18th second, [tex]v_{18B}[/tex] = 0 m/s
(iii) The distance covered by vehicle A up to the 18th second is given by the area under the velocity-time graph as follows;
The area triangle A₁ = (1/2) × 10 × 30 = 150
Area of rectangle, A₂ = 6 × 30 = 180
Area of trapezoid, A₃ = (1/2) × (30 + 20) × 2 = 50
The distance covered in the 18th second by vehicle [tex]S_A[/tex] = A₁ + A₂ + A₃
∴ [tex]S_A[/tex] = 150 + 180 + 50 = 380
The distance covered in the 18th second by vehicle [tex]S_A[/tex] = 380 m
The distance covered by the vehicle B in the 18th second is given by the area under the velocity time graph of vehicle B as follows;
Area of trapezoid, A₅ = (1/2) × (18 + 4) × 40 = 440
The distance covered by the trapezoid, [tex]S_B[/tex] = 440 m
The distance of the two vehicles apart at the 18t second, [tex]S_{AB}[/tex] = [tex]S_B[/tex] - [tex]S_A[/tex]
∴ [tex]S_{AB}[/tex] = 440 m - 380 m = 60 m
The distance of the two vehicles from one another at the 18th second, [tex]S_{AB}[/tex] = 60 m.
What is role of force on the speed of moving object?
Answers
Explanation:
this is the ans hope it works
Answer:
Forces make things speed up (or accelerate). When a force pushes or pulls the object, the object will move in the direction of the force. The bigger the force, and the lighter the object, the greater the acceleration.
Explanation:
The action from a force can cause an object to move or speed up (accelerate), to slow down (decelerate), to stop, or to change direction. Since any change in velocity is considered acceleration, it can be said that a force on an object results in the acceleration of an object.
A simple mathematical relationship exists between the mass of an object (m), the net force on the object (f) and its acceleration (a). The acceleration of an object is directly proportional to the net force and indirectly proportional to the object’s mass (a = f/m).
Which of the following could be included in your gamer's creed that would help keep gamers safe?
A. I will work hard and play harder. Games are my life.
B. I will use privacy features that gaming sites provide to ensure I do not share personal information with strangers.
C. I will do whatever I can to win games I play online.
D. I will share the game equally with my friends and family.
swered
Answers
Answer:
The answer is B. I will use privacy features that gaming sites provide to ensure I do not share personal information with strangers.
Explanation:
It keeps you safe online
Answer: the answer is b
Explanation:
Basketball was developed so that athletes would have a sport to play during the _________.
A. Fall
B. Winter
C. Spring
D. Summer
Answers
Answer:
B. Winter
Explanation:
Describe how an oscilloscope should be used to measure the frequency of the sound wave from the sonometer
Answers
Answer:
T = reading (cm) time base (s / cm)
f = 1 / T
Explanation:
An oscilloscope is a piece of equipment that allows you to visualize and measure a wave that reaches you, in the case of having a sonometer this transforms the sound wave into an electrical signal to be introduced through one of the voltage channels of the equipment, on the screen we will see the oscillating alternating signal, if it is fixed we can make the reading, if it is moving the time base and the trigger must be adjusted to stop it.
In the oscilloscope we can read the period of the signal, this is the time it takes for the signal to repeat itself with this value, we can calculate the frequency with the formula, for the reading of the period the distance is measured on the labeled screen and multiplied by the time base
T = reading (cm) time base (s / cm)
f = 1 / T
Please select the word from the list that best fits the definition
Does not easily transfer electricity
conductor
insulator
circuit
current
Answers
Answer:
conductor
Does not easily transfer electricity
A parallel plate capacitor of capacitance Co has plates of area A with separation d between them. When it is connected to a battery of voltage Vo, it has charge of magnitude Qo on its plates. It is then disconnected from the battery and the plates are pulled apart to a separation 2d without discharging them. After the plates are 2d apart, the new capacitance and the potential difference between the plates are: (Show all steps) [2 marks] a. ½ Co, ½ Vo b. ½ Co, 2Vo c. Co, Vo d. Co, 2Vo e. 2Co, 2Vo
Answers
Answer:
b. 1/2·C₀, 2·V₀
Explanation:
The capacitance on the parallel plate capacitor = C₀
The area of the plates = A
The voltage on the battery = V₀
The magnitude of the charge on the plate = Q₀
The new distance between the plates = 2·d
From an online physics source, we have;
[tex]C_0 = \epsilon_0 \times \dfrac{A}{d}[/tex]
Where;
ε₀ = Constant
A = The area of the plates
With the new distance, 2·d, we get;
[tex]C_{new} = \epsilon_0 \times \dfrac{A}{2\cdot d} = \dfrac{1}{2} \times \epsilon_0 \times \dfrac{A}{d} = \dfrac{1}{2} \times C_0[/tex]
Therefore;
[tex]The \ new \ capacitance \ C_{new} = \dfrac{1}{2} \times C_0[/tex]
The potential difference, 'V', is given as follows;
[tex]C = \dfrac{Q}{V}[/tex]
Therefore;
[tex]V = \dfrac{Q}{C}[/tex]
Given that Q = Q₀, we get;
[tex]V = \dfrac{Q_0}{\dfrac{1}{2} \times C_0} = 2 \times \dfrac{Q_0}{C_0} = 2 \times V_0[/tex]
∴ V = 2 × V₀
The new potential difference, V = 2·V₀
Therefore, after the plates are 2·d apart, the new capacitance and potential difference between the plates are;
1/2·C₀, 2·V₀.
At a distance of 2d, the potential difference will be twice the potential difference before while the capacitance will be half the value before.
Given to us
The capacitance on the parallel plate capacitor = C₀The area of the plate = AThe voltage on the battery = V₀The magnitude of the charge in the plate = Q₀The new distance between the plates = 2d What is Capacitance?We know capacitance can be written as,
[tex]C= \dfrac{\epsilon_0 A}{d}[/tex]
where C is the capacitance,
A is the area,
d is the distance and
ε₀ is the electrostatic constant,
Capacitance before,[tex]C= \dfrac{\epsilon_0 A}{d}[/tex]
Capacitance Afterwards,[tex]C= \dfrac{\epsilon_0 A}{2d}[/tex]
[tex]C=\dfrac{1}{2} \times \dfrac{\epsilon_0 A}{d}[/tex]
[tex]C=\dfrac{1}{2} \times C_0[/tex]
What is Voltage(Potential difference)?We know that for the voltage we can write,
[tex]\rm Voltage = \dfrac{Charge}{Capacitance}[/tex]
Voltage before[tex]V=\dfrac{Q_0}{C_0}[/tex]
Voltage Afterwards[tex]V_{new} = \dfrac{Q_0}{C_{new}}[/tex]
[tex]V_{new} = \dfrac{Q_0}{\dfrac{1}{2} \times C_0}[/tex]
[tex]V_{new} = 2 \times\dfrac{Q_0}{C_0}[/tex]
[tex]V_{new} = 2 \times V_0[/tex]
Hence, At a distance of 2d, the potential difference will be twice the potential difference before while the capacitance will be half the value before.
Learn more about Capacitance:
https://brainly.com/question/12356566
which feature is used to classify galaxies
age
color
shape
size
Answers
Answer:Shape
I took the quiz
Answer:shape
Explanation:
I took the quiz
Which of the following are true about electrons? a.) They are positively charged b.) They are negatively charged c.) They are found inside the nucleus d.) a & c
Answers
Answer:
A and C
Explanation:
BRAINLIEST PLS
Answer:
b
Explanation:
The answer is b.. because the charge of electrons is opposite to that of protons.. the combination of the equal number of protons and electrons has a total charge of zero(0)....
What makes the results of a scientific experiment accurate? (5 points)
Answers
Answer:
A measurement is reliable if you repeat it and get the same or a similar answer over and over again, and an experiment is reliable if it gives the same result when you repeat the entire experiment.
Explanation:
Answer: when you repeat it and get the same results
Explanation:
When a scientist repeats an experiment with a different group of people or a different batch of the same chemicals and gets very similar results then those results are said to be reliable. Reliability is measured by a percentage – if you get exactly the same results every time then they are 100% reliable.
NEED HELP The main difference between kinetic energy and potential energy is thatSingle choice.
(2 Points)
kinetic energy involves position, and potential energy involves motion.
kinetic energy involves motion, and potential energy involves position.
although both energies involve motion, only kinetic energy involves position.
although both energies involve position, only potential energy involves motion.
Answers
Answer:
kinetic energy involves motion, and potential energy involves position.although both energies involve position, only potential energy involves motion.hope it is helpful to you ☺️☺️✌️
differences between weightlessness in space and weightlessness in earth
Answers
Answer:
it depends on a person's own weight
Answer:
The gravity is roughly the same. The inverse square law applies to gravity and that means that being 60 miles above Earth is about the same as being on Earth. The thing is, they are going really fast in an orbit and thus falling around the Earth. The weightlessness comes from a sort of cancellation of gravity pulling them down and their going perpendicular to that force. The forces are cancelling and making them relatively “weightless”. It’s not really weightlessness but just an equilibrium reached between the two accelerations of gravity and their motion against the pull of the Earth.
Explanation:
Two Brothers are playing soccer on the beach. One brother kicks the ball really hard and the ball lands in the water, about 50 meters from the beach. They wonder if the ball will float back to the beach.
Answers
Answer:
Due to wind and waves of water.
Explanation:
They wonder that the ball will float back to the beach because of the wind and the waves of the water. The wind blows towards the beach which moves the water in the form of waves towards the beach so if the ball lands in the water, it will floats on the surface of water and move towards the beach with the help of wind and waves of the sea. The ball floats on the water due to its lighter weight and lower density as compared to water.
Below is a single of DNA, What is the complementary base pair for RNA?
AGC, CGT, ATA, GAT
Answers
Researchers have found that the larvae of all North American firefly species glow as a warning sign to ward off predators. However, the presence and use of lighting organs in adult fireflies vary greatly. Some species use glowing or light flashes as mating signals, while other species produce pheromones as mating signals and do not glow at all. Discuss how the physical characteristics and mating behavior of North American fireflies support the theory of speciation. In your discussion, provide a hypothesis to explain the driving force behind the differences in mating signals among the species.
Answers
Explanation:
The theory of speciation confirms what happens with fireflies, only fireflies that are part of the same species can reproduce among themselves, which means that fireflies that use pheromones as mating signals will attract fireflies that use that same form or mechanism of reproduction.
Some mechanisms that allow this type of differentiation or speciation to occur are: seasonal or geographic isolation and sexual isolation due to behavior or conduct.
Speciation allows the formation of new populations of organisms that share the same physiological and genetic characteristics. Therefore, the adult fireflies that shine as a mating signal are possibly found in the same geographical position and their physiological and genetic characteristics are compatible with those of his own species.
How come we can see orange? In simple words.
Answers
Answer:
When sunlight shines through an orange solution, the violet, blue and green wavelengths are absorbed. The other colors pass through.
Multiple Choice
Which is the best reason to be wary of those you talk to on the Internet?
A. They may not be who they say they are.
B. You don't know where they live.
C. You don't know their favorite foods.
D. They may not be in the same grade as you.
Answers
Se dea caer una pelota de basquetbol desde una altura de 90 metros.Calcular: El tiempo en que demorara en caer y a velcidad con la que llega al suelo
Answers
Answer:
1. t = 4.24 s
2. [tex]v_{f} = 42.43 m/s [/tex]
Explanation:
Podemos encontrar el tiempo de caída con la siguiente ecuación:
[tex] v_{f} = v_{0} + gt [/tex] (1)
En donde:
[tex] v_{f}[/tex]: es la velocidad final de la pelota
[tex] v_{0}[/tex]: es la velocidad inicial = 0 (se deja caer)
g: es la aceleración debida a la gravedad = 10 m/s²
Debemos hallar primero la velocidad final. Podemos usar la ecuación:
[tex] v_{f}^{2} = v_{0}^{2} + 2gh [/tex] (2)
En donde:
h: es la altura = 90 m
[tex] v_{f} = \sqrt{2gh} = \sqrt{2*10 m/s^{2}*90 m} = 42.43 m/s [/tex]
Entonces, la velocidad con la que la pelota llega al suelo es 42.43 m/s.
Ahora podemos encontar el tiempo que tarda en caer la pelota resolviendo la ecuación (1) para "t":
[tex] t = \frac{v_{f}}{g} = \frac{42.43 m/s}{10 m/s^{2}} = 4.24 s [/tex]
Por lo tanto, la pelota tarda 4.24 segundos en caer.
Espero que te sea de utilidad!
Un tanque de 50 litros tiene un gas a CNPT. ¿Cuánto valdrá la presión si la temperatura aumenta 40 °C, y el volumen permanece constante?
Answers
Answer:
La presion a 40 °C es 1.05 atm.
Explanation:
Usando la ecuación ideal de los gases.
[tex]PV=nRT[/tex]
Debemos recordar, que CNPT significa condiciones normales de presión y temperatura.
Para el primer estado tenemos:
[tex]P_{1}V_{1}=nRT_{1}[/tex]
Donde:
P(1) es la presion en el estado incial (1 atm)V(1) es el volumen incial (50 L)T(1) es la temperatura incial (25 °C = 298 K)Para el segundo estado:
[tex]P_{2}V_{2}=nRT_{2}[/tex]
Donde:
P(2) es la presion en el estado final ( x atm)V(2) es el volumen final (50 L)T(2) es la temperatura final (40 °C = 313 K)Como ambas ecuaciones tienen el mismo valor de volumen podemos igualarlas:
[tex]\frac{nRT_{1}}{P_{1}}=\frac{nRT_{2}}{P_{2}}[/tex]
n y R permanecen constantes, se puden cancelar.
[tex]\frac{T_{1}}{P_{1}}=\frac{T_{2}}{P_{2}}[/tex]
Despejamos P(2).
[tex]P_{2}=\frac{P_{1}T_{2}}{T_{1}}[/tex]
[tex]P_{2}=\frac{1*313}{298}[/tex]
[tex]P_{2}=1.05\: atm[/tex]
Espero te haya sido de ayuda!