which of the following is the most accurate description of all known spaces

Answer:

CaC2 + 2H2O > C2H2 + Ca(OH)2

Explanation:

Count the amounts of Ca, C, H, and O, all separately on both sides.

Ca: 1                     Ca: 1

C: 2                      C:2

H: 2                      H: 4

O: 1                       O: 2

Now, your goal is to get both sides equal to each other by adding a 2 in front of H2O.

C. The concentrations of liquid water and water vapor are stable. it describes the fact that liquid water and water vapor are at equilibrium.

Hence, option (c) is correct. The concentration of liquid water and water vapor will become stable.

Learn more about water vapor:

https://brainly.com/question/17259832

Answer:

Hexyne. What does the name of this hydrocarbon tell you about its molecular structure?

A.There are six parent carbon atoms and one triple carbon bond.

B.There are six parent carbon atoms and one double carbon bond.

C. There are seven parent carbon atoms and one triple bond.

D. There are eight parent carbon atoms and all single carbon bonds.

E.There are eight parent carbon atoms and one triple bond.

Explanation:

The correct answer is A. The prefix "hex-" indicates that there are six carbon atoms in the molecule, and the suffix "-yne" indicates that there is a triple bond between two of the carbon atoms. Therefore, hexyne has six carbon atoms and one triple bond.

Answer:

7.94 x 10^6 mol

Explanation:

PV=nRT

n=(PV)/(RT)

n=(1.10*12.0)/(8314*200)

n=7.94 x 10^6 mol

Answer: A. the age of a layer of rock

Explanation:

Index fossils are of organisms that lived over a wide area. They lived for a fairly short period of time.

Index fossils are found throughout the world and come from organisms which existed during the limited periods of geologic time. Index fossils can be used to determine the age of a layer of rock. Thus, the correct option is A.

Index fossil is any kind of animal or plant that is preserved in the rock record of the Earth which is characteristic of a particular span of geologic time. A useful index fossil must be distinctive or is easily recognizable, abundant, and have a very wide geographic distribution and also a short range through time.

Index fossils are used to define the geological periods or the age of a layer of rock. These fossils can be defined as the commonly found, widely distributed fossils that are limited in time span. If a person finds an index fossil in a given layer, then he has bounds on the age of the layer.

Therefore, the correct option is A.

Learn more about Index fossils here:

https://brainly.com/question/2495177

#SPJ2

Answer:

Lewis acids cannot have a hydroxide or hydrogen ion or donate a hydrogen ion, so they are neither an Arrhenius or a Brønsted-Lowry acid or base. Lewis bases will always be Brønsted-Lowry bases because they can accept a hydrogen ion.

According to Lewis concept ,Lewis acids cannot have hydroxide or hydrogen ion or donate a hydrogen ion, so they are neither an Arrhenius or a Brønsted-Lowry acid or base. Lewis bases will always be Brønsted-Lowry bases because they can accept a hydrogen ion.

According to Lewis concept, Lewis dot structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .

They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.

They are capable of reflecting electronic structure of elements and even the pairing of electrons . In the diagram, each dot represents an electron while a pair of dots represent a bond between the atoms.

Learn more about Lewis concept,here:

https://brainly.com/question/12972723

#SPJ5

Answer:

As the temperature of a sample of gas falls from 45.0ºC to 30.0ºC, its pressure falls to 300.

Explanation:

Answer:

D: Salt in water

Explanation:

Answer:

Gas

Explanation:

Molecules in the solid phase have the least amount of energy, while gas particles have the greatest amount of energy. The temperature of a substance is a measure of the average kinetic energy of the particles.

BRAINLIEST :)()()(

The particles in the gaseous phase of a substance have the greatest average kinetic energy.

The average kinetic energy refers to the kinetic energy accompanied by the maximum number of molecules whereas total kinetic energy is the kinetic energy of the total number of moles of gas molecules.

The total kinetic energy of molecules in a gas is determined by using the following formula,

Total Kinetic Energy  = (3/2)nRT

Where R is the gas constant, n is the number of moles of gas, and T is the temperature of the reaction.

At any given temperature, all of the molecules of a sample do not have the same kinetic energy. Instead of that, the particles show a wide range of kinetic energies.

The average kinetic energy of the particles in the solid phase is the least and the particles or molecules in the gaseous phase have the greatest average kinetic energy.

Learn more about average kinetic energy, here:

https://brainly.com/question/124134093

#SPJ2

Answer:267 g

Explanation:

Answer:

267 g

Explanation:

Answer:

0.479 M or mol/L

Explanation:

So Molarity is moles/litres of solution...often written as M=mol/L

So here we are given grams of BaCl2 which we have to convert to moles. To convert to moles of BaCl2 we have to divide 63.2 g BaCl2 by molar mass of BaCl2 which is 208.23 g/mol so you get 63.2/208.23 = 0.3035 moles of BaCl2

Second step is converting the 634mL to litres by simply dividing by 1000 because we know 1 litre has 1000ml so 634/1000 = 0.634L

Now we just plug these guys in our molarity formula M=mol/L

M= 0.3035/0.634 = 0.479 M or mol/L

Answer:

Interestingly enough, I'm not getting

0.0341% w/v

either. Here's why.

Start by calculating the percent composition of chlorine,

Cl

, in calcium chloride, This will help you calculate the mass of chloride anions,

Cl

−

, present in your sample.

To do that, use the molar mass of calcium chloride, the molar mass of elemental chlorine, and the fact that

1

mole of calcium chloride contains

2

moles of chlorine atoms.

2

×

35.453

g mol

−

1

110.98

g mol

−

1

⋅

100

%

=

63.89% Cl

This means that for every

100 g

of calcium chloride, you get

63.89 g

of chlorine.

As you know, the mass of an ion is approximately equal to the mass of the neutral atom, so you can say that for every

100 g

of calcium chloride, you get

63.89 g

of chloride anions,

Cl

−

.

This implies that your sample contains

0.543

g CaCl

2

⋅

63.89 g Cl

−

100

g CaCl

2

=

0.3469 g Cl

−

Now, in order to find the mass by volume percent concentration of chloride anions in the resulting solution, you must determine the mass of chloride anions present in

100 mL

of this solution.

Since you know that

500 mL

of solution contain

0.3469 g

of chloride anions, you can say that

100 mL

of solution will contain

100

mL solution

⋅

0.3469 g Cl

−

500

mL solution

=

0.06938 g Cl

−

Therefore, you can say that the mass by volume percent concentration of chloride anions will be

% m/v = 0.069% Cl

−

−−−−−−−−−−−−−−−−−−−

I'll leave the answer rounded to two sig figs, but keep in mind that you have one significant figure for the volume of the solution.

.

Explanation:

Answer:

Dehydration of Sugar

Explanation:

Answer:

No.4 is B No.5 is d

Explanation:

Answer:

Q 4: d

Explanation: this is all I can answer

Answer:

A

Explanation:

Unlike the female reproductive system, the most parts of the male reproductive system are located outside the body. The mentioned part in the given diagram is urethra and it Mixes sperm and semen. The correct option is A.

The male reproductive system includes the testes, scrotum, spermatic ducts, male accessory glands and phallus. All these organs work together to produce sperms, the male gamete, male sex hormones and other components of semen.

The phallus and urethra are the parts of both the reproductive and urinary systems. Scrotum, seminal vesicles, vas deferens, testicles and prostate constitute all the remaining male reproductive system.

The urethra is a tube like structure which is the region included in the urinary tract that takes the urine from the bladder where the semen is ejaculated.

Thus the correct option is A.

To know more about male reproductive system, visit;

https://brainly.com/question/940283

#SPJ7

Answer:

Your answer is cells. Hope this helps!

The mass of cesium fluoride which is required to make 73.1 g of cesium xenon heptaflouride is 27.6 grams.

Relation between the mass and moles of any substance will be represented as:

n = W/M, where

Moles of CsXeF₇ = 73.1g / 397g/mol = 0.184mol

Given chemical reaction is:

CsF + XeF₆ → CsXeF₇

From the stoichiometry of the reaction, it is clear that:

0.184 moles of CsF required = to react with 0.184 moles of CsXeF₇

Now we convert this moles of CsF into mass as:

W = (0.184mol)(150g/mol) = 27.6 g

Hence required mass of CsF is 27.6g.

To know more about mass & moles, visit the below link:

https://brainly.com/question/15373263

#SPJ2

Answer:

The temperature of the cold water is lower than the warm one. So, when we put the hand in the warm from the cold water, our hand will absorb heat, causing the hand to feel hot. Thus, we can conclude that the more heat it absorbs, the more hotter it is. Whereas the more heat it releases, the colder it is.

Answer:

Greenhouse gases such as carbon dioxide and water vapor make an atmosphere around the earth and make less heat escape

Explanation:

Answer:

There are 0.12269 Liters of Iron

Explanation:

First, by means of the molecular weight equation, the grams of iron corresponding to 17.3 moles can be calculated:

[tex]MW=\frac{mass(grams)}{moles}[/tex]

[tex]mass=MW*moles=55.845\frac{g}{mol} *17.3mol=966.119 g[/tex]

Then using the density equation the iron milliters are calculated:

[tex]d=\frac{mass(g)}{volume(mL)}[/tex]

[tex]volume=\frac{mass}{density}=\frac{966.119g}{7.874\frac{g}{mL} } =122.69 mL[/tex]

Milliliters to liters are converted:

122.69 mL = 0.12269 L of Iron.

Answer:

[tex]V_{Fe}=0.125L[/tex]

Explanation:

Hello,

In this case, given the moles of iron, we need to use it atomic mass (55.845  g/mol) and density (7.874 g/cm³) in order to firstly convert from moles to grams and secondly from grams to cubic centimetres:

[tex]V_{Fe}=17.6molFe\times \frac{55.845gFe}{1molFe}*\frac{1cm^3}{7.874gFe}=124.8cm^3[/tex]

Finally, we obtain the volume in litres by:

[tex]V_{Fe}=124.8cm^3*\frac{1L}{1000cm^3} \\\\V_{Fe}=0.125L[/tex]

Best regards.

Answer:

The correct answer is The pressure of the gas will increase

The volume of the gas will increase

Explanation:

Step 1: Data given

The gas in a container is heated, this means the temperature increases

Suppose we start with a temperature of 100 K and a pressure of 1 atm and a volume of 1L

Step 2:

V1/T1= V2/T2

⇒V1 = the initial  volume = 1L

⇒T1 = the initial temperature = 100 K

⇒V2 = the new volume = TO BE DETERMINED

⇒T2 = the increased temperature = 200 K

1/100 = V2 / 200

V2 = 2 L

This means when the temperature increases, the volume will increase

P1/T1 = P2/T2

⇒P1 = the initial pressure = 1 atm

⇒T1 = the initial temperature = 100 K

⇒P2 = the new pressure = TO BE DETERMINED

⇒T2 = the increased temperature = 200 K

1/100 = P2 / 200

P2 = 2 atm

This means when the temperature increases, the pressure will increase

The correct answer is The pressure of the gas will increase

The volume of the gas will increase

Answer:

coal is made from compressed plant matter and how exactly did plants grow on the surface of an ocean. (as there is no land mass beneath the arctic.)

Explanation:

it would be like finding a fly in an ice cube to simplify it.

They were surprised to find coal in arctic because ordinarily coal was supposed to be found in warm or hot environments and not cold region like the arctic.

The arctic is located at the far northern part of the world which is characterized by its extreme cold weather.

A limited vegetation of plants such as grasses, mosses and lichens are found in this region irrespective of the extreme cold weather through out the year.

Coal is a type of fuel gotten from fossils and deposits of plant vegetation.

Scientist has discovered that continents do move over time through a process called continental drift. This is the reason why limited vegetaion is found in the arctic leading to the formation of coal.

Learn more here:

https://brainly.com/question/22647554

Answer:

sediment, metamorphic rock, sedimentary rock, weathering and erosion

Explanation:

for edge 2020

hope this helps

HAVE A GREAT DAY : )

Sediment, sedimentary rock, or metamorphic rock are the parts of the rock cycle. Therefore, the correct option is option A.

Sedimentary rocks are created by the aggregation or deposition of organic or mineral particles at the Earth's surface, following by cementation. Sedimentation refers to the mechanisms that lead these grains to settle in situ.

Any of a family of rocks formed by the modification of pre - existing rocks in reaction to changing environmental circumstances, such as temperature, pressure, or mechanical stress, as well as the addition or deletion of chemical components is  metamorphic rock. Sediment, sedimentary rock, or metamorphic rock are the parts of the rock cycle.

Therefore, the correct option is option A.

To know more about rock, here:

https://brainly.com/question/29767269

#SPJ2

Answer:

I am pretty sure that it is A. H2.

Explanation:

Sorry if it's wrong.

Answer:

B. Watermelon

Explanation:

Watermelon is the only option with a definite shape that wouldn't change if you put it in a bowl

Answer:

It is endothermic and entropy increases.

Explanation:

Answer:

D. Wind Speed

Explanation:

When the question brings up 35 m/h, the m/h stands for Miles per Hour. What option can you measure the miles per hour. Here's a hint, it applies to cars as well when cops give your parents speeding tickets. Miles per Hour = Speed. So, you are measuring the wind speed.

Answer:

Lens

A curved piece of glass or other transparent material that is used to refract light.

Explanation:

u got ig?

A curved piece of glass or other transparent material that is used to refract light is called a lens. The correct option is B).

A curved piece of transparent material, such as glass, that bends light is called a lens. A lens's shape and the object's position both affect the kind of image it produces.

The center of a concave lens is thinner than the edges. Bent glass is defined as glass that has been curved or bent into a convex or concave shape. The desired shape is created by gently heating the glass until it becomes pliable, then molding it into that shape.

Light is refracted through lenses. When a light beam enters a lens, it is refracted; then, when it leaves the lens, it is refracted once more.

Therefore, the correct option is the B) lens.

To learn more about the lens, refer to the link:

https://brainly.com/question/766997

#SPJ2

Answer:

The equilibrium concentration of gas A is 1.43 M

Explanation:

Here we have the reaction expressed as follows;

A + B → C + D and

The formula for equilibrium constant is therefore presented as follows;

[tex]K = \frac{[C]\times [D]}{[A]\times [B]}[/tex]

Where:

[C] = [D] = 2.3 M

[A] = [B]

K = 2.6

Hence, we have;

[tex]2.6 = \frac{2.3\times 2.3}{[A]\times [A]} = \frac{5.29}{[A]^2}[/tex]

[tex][A]^2= \frac{5.29}{2.6} = 2.03[/tex]

[A] = 1.43 M

The equilibrium concentration of gas A = 1.43 M.

Answer:

The equilibrium concentration of gas A = 1.43 M

Explanation:

First set up the equilibrium expression:

[tex]K = \frac{[C]\times [D]}{[A]\times [B]}[/tex]

The problem states that each product has a concentration of 2.3M at equilibrium, and that k=2.6

We also know that [A] and [B] are the same.

Since we are solving for [A] I'm going to change [A][B] to A²

[tex]2.6 =\frac{2.3^2}{A^2}[/tex]

Now we just need to solve for A²

A² = 5.29 / 2.6

A² = 2.0346

A = √2.0346

A = 1.43

Therefore, the equilibrium concentration of gas A = 1.43 M.