Which of the following is NOT part of the grain group?

Answer:

[tex]\lambda_s =6.43*10^-4m[/tex]

Explanation:

From the question we are told that:

Diffraction grating [tex]N=1250slits/cm[/tex]

Distance b/w Screen and grating length [tex]d_{sg}=17.5 cm[/tex]

Distance b/w neighboring maxima and Screen [tex]d_{ms}=8.44[/tex]

Generally the equation for grating space is mathematically given by

[tex]d(g)=\frac{1}{N}[/tex]

[tex]d(g)=\frac{100}{1250}[/tex]

[tex]d(g)=0.08[/tex]

Generally the equation for small angle approximation is mathematically given by

[tex]\triangle y=\frac{\lambda d}{L}[/tex]

Therefore for longest wavelength

[tex]\lambda _l=\frac{8.44*10^{-3}*(0.08)}{0.175m}[/tex]

[tex]\lambda _l=3.858*10^{-3}[/tex]

Therefore the third order maximum equation for the shorter wavelength as

[tex]\lambda_s =\frac{1}{6} \lambda_l[/tex]

[tex]\lambda_s =\frac{1}{6} (3.858*10^-^3)[/tex]

[tex]\lambda_s =6.43*10^-4m[/tex]

The wavelengths in the light is given as

[tex]\lambda_s =6.43*10^-4m[/tex]

Answer:

isopropyl alcohol would form smaller droplets, because it has lower surface tension than water has

Explanation:

Ap3x

The droplets made of isopropyl alcohol instead of water be smaller due to surface tension.

The single drop of a liquid in the form of sphere is called droplet.

Water can form large dewdrops in nature. Isopropyl alcohol would form smaller droplets, because it has lower surface tension than water.

Surface tension is the property of the liquid to acquire minimum surface area.

Thus, droplets made of isopropyl alcohol instead of water be smaller.

Learn more about droplet.

https://brainly.com/question/2926487

#SPJ2

Answer:

We apply an electric field in the negative y direction

Explanation:

Since A uniform magnetic field is in the positive z direction and A positively charged particle is moving in the positive x direction through the field, the magnetic force acting on the positively charged particle is in the positive y direction according to Fleming's right-hand rule.

For the net force on the particle to be zero, we apply an electric field in the negative y direction to create an electric force on the positively charged particle, so as to cancel out the magnetic force.

Answer:

I know you said not to do this but I am doing a challenge and You asked this an hour ago. PLS DON'T REPORT ME.

Explanation: Sorry

Answer:

5.03

Explanation:

trust me

Answer:

 P and S waves slow down when they reach this layer. The asthenosphere, also known as the magma chamber, is the uppermost component of the mantle. This layer is partially molten and is a ductile zone in a tectonically poor state.

It's almost hard and seismic waves move through the asthenosphere at a slow rate. The fragile lithosphere and the uppermost portion of the asthenosphere are assumed to be rigid.

seismic waves travel more quickly through denser materials and therefore generally travel more quickly with the depth it moves more slowly through a liquid than a solid. Molten areas within the Earth slow down P waves and stop S waves because their shearing motion cannot be transmitted through a liquid. Partially molten areas may slow down the P waves and attenuate or weaken S waves.

hope this helps...

S and P wave slow down and stop in  the uppermost part of the mantle. - For this, scientists have concluded that the uppermost part of the mantle is partially-molten.

A planetary body's mantle is a layer that is surrounded by the crust on top and the core underneath. The largest and most substantial layer of a planetary body, mantles are often comprised of rock or ice. Planetary bodies that have undergone density differentiation typically have mantles. Mantles are found on all terrestrial planets (including Earth), many asteroids, and a few planetary moons.

Between the crust and the outer core, there is a silicate rock layer known as the Earth's mantle. Despite being mostly solid, it behaves like a viscous fluid over geological time. Oceanic crust is created by the partial melting of the mantle at mid-ocean ridges, and continental crust is created by the partial melting of the mantle at subduction zones.

Learn more about mantle here:

https://brainly.com/question/28827790

#SPJ2

Find how much work ∆W is done by the motor in lifting the elevator:

P = ∆W / ∆t

where

• P = 45.0 kW = power provided by the motor

• ∆W = work done

• ∆t = 20.0 s = duration of time

Solve for ∆W :

∆W = P ∆t = (45.0 kW) (20.0 s) = 900 kJ

In other words, it requires 900 kJ of energy to lift the elevator and its passengers. The combined mass of the system is M = (m + 490.0) kg, where m is the mass of the elevator alone. Then

∆W = M g h

where

• g = 9.80 m/s² = acceleration due to gravity

• h = 35.0 m = distance covered by the elevator

Solve for M, then for m :

M = ∆W / (g h) = (900 kJ) / ((9.80 m/s²) (35.0 m)) ≈ 2623.91 kg

m = M - 490.0 kg ≈ 2133.91 kg ≈ 2130 kg

Answer:

1) It seems that he would need the central gravitational force

   (the sun)

2) Also the planets would need to be included (orbits around the sun)

    Mercury, Venus, Earth, Mars, Jupiter, Saturn, etc.

3. Then, many of the planets have significant objects (moons) rotating about them.

Those would seem to be objects to be included in a model of the solar system.

1) He would need the central gravitational force (the sun)

2) The planets would need to be included: Mercury, Venus, Earth, Mars, Jupiter, Saturn, etc.

3) Many of the planets have specific moons rotating about them.

Larry should put the Earth between the planets Venus, and Mars.

Answer:

False

Explanation:

The Sun rotates in this same, right-hand-rule direction. All planetary orbits lie in nearly the same plane. All planetary orbits are nearly circular (eccentricity near zero).

Rate as Brainliest please

Explanation:

mass, m = 5kg

initial velocity, u = 16m/s

final velocuty, v = -22m/s

change in momentum, ∆p = ?

∆p = m (v-u)

5(-22-16)

5(38)

∆p = 190kgm/s

check the calculations!

Answer:

a). Single replacement.

Explanation:

Because one element replaces another element in a compound

A 4.0 kg block is moving at 5.0 m/s along a horizontal frictionless surface toward an ideal spring that is attached to a wall, the maximum speed of the block when the spring is compressed to one-half of the maximum distance is 4.33 m/s

From the conservation of energy; the kinetic energy of the mass is equal to the work done on the spring.

i.e.

[tex]\mathbf{\dfrac{1}{2} mv^2 = \dfrac{1}{2}kx^2_{max}}[/tex]

Given that:

∴

From the equation above, multiplying both sides with 2, we have:

[tex]\mathbf{mv^2 =kx^2_{max}}[/tex]

Making (k) the subject of the formula;

[tex]\mathbf{k = \dfrac{mv^2}{x^2_{max}}}[/tex]

[tex]\mathbf{k = \dfrac{4 \times 5^2}{0.68^2}}[/tex]

k = 216.26 N/m

However, when compressed to one-half of the maximum distance; the speed is computed as follows:

x = 0.68/2 = 0.34 m

∴

[tex]\mathbf{\dfrac{1}{2}mv_o^2 - \dfrac{1}{2}mv^2 = \dfrac{1}{2}kx^2}[/tex]

[tex]\mathbf{m(v_o^2 -v^2) =kx^2}[/tex]

[tex]\mathbf{(v_o^2 -v^2) =\dfrac{kx^2}{m}}[/tex]

[tex]\mathbf{(5^2 -v^2) =\dfrac{216.26 \times 0.34^2}{4.0}}[/tex]

25 - v² = 6.25

25 -6.25 = v²

v² = 18.75

[tex]\mathbf{ v= \sqrt{18.75 }}[/tex]

v = 4.33 m/s

Therefore, we can conclude that the speed of the block when the spring is compressed to only one-half of the maximum distance is 4.33 m/s

Learn more about speed here:

https://brainly.com/question/22610586?referrer=searchResults

Explanation:

mass=force*acceleration

mass=3000*10

mass=30,000

The mass of the bodies in the elevator is 400 kg.

The acceleration of the elevator is 2.5 m/s².

Acceleration is rate of change of velocity with time. Due to having both direction and magnitude, it is a vector quantity. Si unit of acceleration is meter/second² (m/s²).

Given parameters:

Mass of the elevator: M = 250 kg.

Mass of two persons: m₁ = 50 kg and m₂ = 100 kg.

Force exerted by the motor: F = 3000N.

g = 10 m/s².

Let, the acceleration of the  elevator = a.

the mass of the bodies in the elevator :m= 250 kg. + 50 kg +100 kg. = 400 kg.

Now, F = mg - ma

⇒ 3000 = 400×10 - 400a

⇒ a = 1000/400 = 2.5 m/s²

Hence, the acceleration of the elevator is 2.5 m/s².

Learn more about acceleration here:

brainly.com/question/12550364

#SPJ2

Answer:

The equation says that due to variation in temperature is

delt T = .59 m/s / C = 16 C * .59 m/s = 9.44 m/s

So v = 332 m/s + 9.44 m/s = 341 m/s (to three significant figures)

Answer:

Option C

Explanation:

Options for the question are as follows -

A. At a faucet close to entrance valve

B. At a faucet away from the entrance valve

C. It will be the same at all faucets

D. There will be no increase in the pressure at the faucets

Solution -

The static force will be the same at all faucets and also the area of the faucets be same.

Thus, the pressure created at all faucets will be the same.

Thus, option C is correct

Answer:

I dont know sorry

Explanation:

hehe

Answer:

work done by friction = 5889 J

Explanation:

We are given;

Mass of car; m = 130 kg

Speed at point A; v1 = 25 m/s

Speed at point B: v2 = 8 m/s

Since radius is 12 m

At point A, distance is; y1 = 12 m

At point B, distance is; y2 = -12 m

Now, formula for work done by all the forces is given by the equation;

Total work;

W_gravity + W_others = K2 - K1

Where W_others is work done by other forces which is equal to work done by friction

Where K2 - K1 is change in kinetic energy.

W_grav is also change in potential energy and is expressed as;

W_grav = mgy1 - mgy2

K2 - K1 = ½m(v1)² - ½m(v2)²

Thus;

mgy1 - mgy2 + W_others = ½m(v1)² - ½m(v2)²

Making W_others the subject;

W_others = ½m(v1)² - ½m(v2)² + mgy2 - mgy1

Plugging in the relevant values;

W_others = (½ × 130 × 25²) - (½ × 130 × 8²) + (130 × 9.8 × -12) - (130 × 9.8 × 12)

W_others = 5889 J

Recall that I earlier said W_others = work done by friction.

Thus, work done by friction = 5889 J

Answer:

I think the answer is B, keeps Earth in a spherical shape

Answer:

  L₀ = L_f ,  K_f < K₀

Explanation:

For this exercise we start as the angular momentum, with the friction force they are negligible and if we define the system as formed by the disk and the clay sphere, the forces during the collision are internal and therefore the angular momentum is conserved.

This means that the angular momentum before and after the collision changes.

Initial instant. Before the crash

        L₀ = I₀ w₀

Final moment. Right after the crash

        L_f = (I₀ + mr²) w

we treat the clay sphere as a point particle

how the angular momentum is conserved

       L₀ = L_f

       I₀ w₀ = (I₀ + mr²) w

       w = [tex]\frac{I_o}{I_o + m r^2}[/tex]   w₀

having the angular velocities we can calculate the kinetic energy

starting point. Before the crash

        K₀ = ½ I₀ w₀²

final point. After the crash

        K_f = ½ (I₀ + mr²) w²

sustitute

        K_f = ½ (I₀ + mr²)  ( [tex]\frac{I_o}{I_o + m r^2}[/tex]   w₀)²

        Kf = ½  [tex]\frac{I_o^2}{ I_o + m r^2}[/tex]   w₀²

we look for the relationship between the kinetic energy

        [tex]\frac{K_f}{K_o}[/tex]=   [tex]\frac{I_o}{I_o + m r^2}[/tex]

       [tex]\frac{K_f}{K_o } < 1[/tex]

      K_f < K₀          

we see that the kinetic energy is not constant in the process, this implies that part of the energy is transformed into potential energy during the collision

Answer:

[tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex]

Explanation:

r = Radius = [tex]\dfrac{2}{2}=1\ \text{mm}[/tex]

B = Magnetic field = 3 mT

1 mm = Distance from the surface of the wire

V = Voltage

x = Distance from the probe = [tex]r+1=1+1=2\ \text{mm}[/tex]

R = Resistance

L = Length of wire = 4.5 m

Magnetic field is given by

[tex]B=\dfrac{\mu_0I}{2\pi x}\\\Rightarrow I=\dfrac{B2\pi x}{\mu_0}\\\Rightarrow I=\dfrac{3\times 10^{-3}\times 2\times \pi 2\times 10^{-3}}{4\pi 10^{-7}}\\\Rightarrow I=30\ \text{A}[/tex]

Voltage is given by

[tex]V=IR\\\Rightarrow R=\dfrac{V}{I}\\\Rightarrow R=\dfrac{1.5}{30}\\\Rightarrow R=0.05\ \Omega[/tex]

Resistivity is given by

[tex]\rho=\dfrac{RA}{L}\\\Rightarrow \rho=\dfrac{0.05\times \pi (1\times 10^{-3})^2}{4.5}\\\Rightarrow \rho=3.49\times 10^{-8}\ \Omega\text{m}[/tex]

The resistivity of the material is [tex]3.49\times 10^{-8}\ \Omega\text{m}[/tex].

Answer:

The force of gravity is not the same as being on the earth. when your on the earth there no gravitational pull its all up to the air

Explanation:

No explanation

Answer:

well in the pot there is conventional heat, the pot itself is giving off conductable heat, and the radiational heat is coming from the stove.

Answer:

C: will brake and quickly come to rest.

Explanation:

Correct answer is option C because for the swinging motion of the copper plates between the magnetic field which is set up as a result of it being between the two magnetic poles, there will be a continuous change of magnetic field flux that will be linked with the swinging pendulum.

As a result of this continuous change of magnetic field flux, it makes eddy currents to be set up in the copper plate which according to the Lenz's laws of electromagnetic induction tries to oppose the motion of the swinging pendulum and finally will make it come to rest.

Answer:

A. The water

Explanation:

i got it right on A-P-E-X