WHY ARE ALL GIRLS THE SAME, don't even say their not cause if you say that then I guess you don't have a life!!!!!
Please PLEASE HELP ASAP
A student placed four objects on a plastic tray: a rock, an eraser, a wood block, and an ice cube. The student slowly lifts the tray and measures the height at which each object begins to slide in order to compare the friction of each object. The table above shows the results. In a separate experiment the student used the same objects and tray, but glued a piece of gritty sandpaper to the tray. What results would be expected? A) The items would slide faster at the same heights. B) The items would start to slide when the tray is not lifted as high. C) The items would not slide at all, no matter how high the tray is raised. D) The tray would need to be raised higher before the items start to slide.
Answer:
D) The tray would need to be raised higher before the items start to slide.
Explanation:
The tray would need to be raised higher due to the gritty sandpaper causing it to have more grip or fraction between the two surfaces. In the first experiment it would have a smooth surface to slide across but in the second experiment it would have a rougher surface to slide across.
Example: It would be like taking two different kinds of shoes like tennis shoes and football cleets. Then seeing which one has more traction when going up a hill.
Hope this helps!!
Which of these is an example of tertiary prevention?
A. Getting screened for skin cancer
B. Avoiding smoking and drinking alcohol
C. Dialysis for damaged kidneys
D. Washing hands
Explanation:
because a tertiary prevention is when the person is already infected with the disease
What does a Keystone species do for the environment?
what foxes need to eat to
stay alive
Answer:
They eat meat and vegetation.Answer:
Meat and vegetation...Approximate the human form as an unclothed vertical cylinder of 0.3 m diameter and 1.75 m length with a surface temperature of 30 oC.(a)Calculate the heat loss in a 10 m/s wind at 20 oC.(b)What is the heat loss if the skin is covered with a thin layer of water (i.e., sweat) at 30 oC and the relative humidity of the air is 60 %
Answer:
[tex]q=1118.865W[/tex]
Explanation:
From the question we are told that
Diameter of the cylinder [tex]D=0.3m[/tex]
Length of the cylinder [tex]L=1.75m[/tex]
Surface temperature of cylinder [tex]T_s=30 \textdegree C=303k[/tex]
Speed of air [tex]V=10m/s[/tex]
Temperature of air [tex]T=20 \textdegree C[/tex]
Generally the equation for Reynolds number is mathematically given by
[tex]Re_D=\frac{VD}{v}[/tex]
where
[tex]v=15.27*10^-^6[/tex]
[tex]Re_D=\frac{10*0.3}{15.27*10^-^6}[/tex]
[tex]Re_D=1.96*10^5[/tex]
Generally the equation for Nusselt number is mathematically given by
[tex]N_u=0.6(Re_D)^{0.6}(Pr)^{0.37}[/tex]
where
Prandtl number
[tex]Pr=0.71[/tex]
[tex]N_u=0.6(Re_D)^{0.6}(Pr)^{0.37}[/tex]
[tex]N_u=0.6(1.96*10^5)^{0.6}(0.71)^{0.37}[/tex]
[tex]N_u=791.53[/tex]
Generally the equation for convective heat transfer is mathematically given by
[tex]h=Nu \frac{k}{D}[/tex]
where
[tex]k=25.7*10^{-3}[/tex]
[tex]h=791.53*\frac{25.7*10^{-3}}{0.3}[/tex]
[tex]h=67.81W/m^2K[/tex]
Generally the equation for surface area of a cylinder is mathematically given by
[tex]A=\pi DL[/tex]
[tex]A=\pi *0.3*1.75[/tex]
[tex]A=1.65m^2[/tex]
Generally the equation for convective heat transfer is mathematically given by
[tex]q=h4(T_s-T_{inty)}[/tex]
[tex]q=(67.81)*1.65*(30-20)\\[/tex]
[tex]q=1118.865W[/tex]
A 6.25 g quarter sits 25 cm from the axis of rotation on a turntable that has a period of rotation of 1.8 seconds.
What must the coefficient of static friction be in order to keep the quarter from sliding outward when the
turntable is in motion?
The coefficient of static friction be in order to keep the quarter from sliding outward when the turntable is in motion will be 0.31.
What is the friction force?It is a type of opposition force acting on the surface of the body that tries to oppose the motion of the body. its unit is Newton (N).
Mathematically it is defined as the product of the coefficient of friction and normal reaction.
On resolving the given force and acceleration in the different components and balancing the equation gets. The friction force balances centripetal force.
The given data in the problem will be;
m is the mass =6.25 g
r is the radius =25 cm=0.25 m
t is the time = 0.18 sec
μ is the coefficient of static friction =?
[tex]\rm F_c= mw^2r \\\\ f= \mu mg \\\\ F_C=f\\\\ mw^2r= \mu mg \\\\ \rm \mu = \frac{\omega^2r}{g} \\\\ \rm \mu = (\frac{2\pi}{1.8} )^2\frac{0.25}{9.81} \\\\ \rm \mu = 0.31[/tex]
Hence the coefficient of static friction will be 0.31.
To know more about friction force refer to the link;
https://brainly.com/question/1714663
HELP PLEASE
Two 24 ohm resistors are in parallel and placed across a 12 V battery. What is the current in each branch of the circuit?
20 A
0.0125 A
0.5 A
.
Answer:
.5 A
Explanation:
please help asap
Ms. Brando’s students are studying forces. She has assigned a fun task: designing a balloon car. The students must design a car and see which model will travel the greatest distance. The basic design of the cars can be seen here. First the balloon is inflated and attached to the car. It is important to keep the balloon closed. Once attached to the car, the stem of the balloon is opened and air rushes out through the straw. The air goes one way; the car moves in the other direction. There are no restrictions on the design other than the students must use the materials given to them by Ms. Brando. What is the source of the force that moves the car? A) The circumference of the balloons. B) The friction between the wheels and the track surface. C) The air rushing out of the balloon through the straw. D) The mass of the car: the lighter the car the farther it moves.
Answer: a
Explanation:
when a car dives on a road it a makes friction but it need something to push it or start it which is the balloon in this example
(sorry if im wrong)
Why is no image formed when an object is at the focal point of a converging lens?
Answer:
the refracted rays neither converge nor diverge. After refracting, the light rays are traveling parallel to each other and cannot produce an image.
Explanation:
Calculate the net force for each of the following:
a.
20 N to the right and 30 N to the right:
Answer and Explanation:
A.
There would be a net force of 50 N going to the right.
Since both forces are going right, they add onto the force amount.
#teamtrees #PAW (Plant And Water)
explain why when water is poured on a dry class slab it spreads uniformly but it forms spherical droplets on a waxed glass slab
Answer and Explanation:
The texture of the slabs affects the type of bonding the water molecules has with each other.
The dry glass slab allows the water to form cohesive bonds with each other, making the water stick to itself and not the slab, which makes it flow uniformly, or regularly.
The Waxed glass slab has a different texture that forms an adhesive-type bonding with water, making the water stick to the slab at certain parts/forming the spherical droplets.
#teamtrees #PAW (Plant And Water)
Calculate the speed of an object that travels 75m in 15s.
Why are objects that fall near Earth's surface rarely in free fall?
O Gravity does not act on objects near Earth's surface.
O Air exerts forces on falling objects near Earth's surface.
O The objects do not reach terminal velocity.
O The objects can be pushed upward by gravity.
Answer:
Air exerts forces on falling objects near earth's surface
Explanation:
Falling objects are typically subject to air resistance which prevents the force of gravity on the object
SEND HELP
Which of these is one of the five determinants of health?
A. The gender of your doctor
B. Your access to health services
C. The type of sport you play
D. The amount
your insurance deductible
Answer:
B
Explanation:
After the initial experiment, students wondered how a person's weight would influence the results. They conducted a second experiment to determine if the mass of an object affected friction, assuming the types of surfaces remained constant. A spring scale was attached to a wooden block (1 kg). The block was placed on a wooden board and the spring scale was used to pull the block. The magnitude of the force required to start the block moving was recorded in the data table. The experiment was repeated using two, three, and four blocks. The data can be seen in the data table at the top of the page. What is the relationship between static friction and weight?
Answer:
The greater the weight of the person, the more static friction.
Explanation:
USATestPrep
Question 6.Why does a ball dropped from a certain height not bounce back 1 point
to the same height it was dropped from? *
Answer:
Because the coefficient of restitution is less than 1.
This coefficient is 1 for a perfectly elastic collision.
Some of the energy of the fall is absorbed by the ball so the ball cannot return to its original height.
Also, you have the effects of air resistance and some energy absorption of the the reflecting surface.
You are pulling with 57 N on a heavy bookshelf, but the bookshelf doesn't move. What is the force of static friction in Newtons acting on the bookshelf?
Answer:
57N
Explanation:
Since the bookshelf isn't moving, the force you're exerting on the shelf must be equal to the force of static friction
So the force of static friction is 57N
As you know a cube with each side 4 m in length has a volume of 64m3. Each side of the cube is now doubled in length. What is the ration if the new volume to the old volume
Answer:
The ratio of the new volume to the old volume is 8 to 1.
Explanation:
Let's first list what we know:
A cube has sides with lengths of 4 mThe volume of the cube is 64 [tex]m^3[/tex]The new cube has sides double the length of the old cubeSince the new cube has sides double the length of the sides of the old cube, and 4 doubled is 8, the length of the sides of the new cube is 8.
The equation for the volume of a cube is [tex]V = s^3[/tex], where "V" is the volume and "s" is the lengths of the sides.
Now, let's solve for the volume of the new cube:
[tex]V = s^3[/tex]
[tex]V = 8^3[/tex]
[tex]V = 512[/tex]
The volume of the new cube is 512 [tex]m^3[/tex].
The ratio of the new volume to the old volume is 512 : 64.
Let's simplify the ratio:
512 : 64
8 : 1
The ratio of the new volume to the old volume is 8 to 1.
P.S. This question should be in the mathematics subject, not the physics subject. (I pretty much only do math problems, so yes, it does matter. I don't know about the others though.)
A coaxial cable consists of an inner cylindrical conductor of radius 3 cm on the axis ofan outer hollow cylindrical conductor of inner radius 7 cm and outer radius of 10 cm.The inner conductor carries current 4.5 A in one direction, and the outer conductor carries current 8 A in the opposite direction. What is the value of the magnetic field atfollowing distances from the axis of the cable:
Answer:
Hello your question lacks some information and that is the distance
At r = 0.150 m (outside the cable) note : (μ 0 = 4π × 10-7 T · m/A)
answer: 4.7 * 10^-6 T
Explanation:
R1 = 0.03 m
R2 = 0.07 m
R3 = 0.1 m
Inner conductor carries current = 4.5A in one direction
outer conductor carries current = 8A in opposite direction
Determine the value of magnetic field at r = 0.150 m
net current = 8 - 4.5 = 3.5 A
∴ β ( value of magnetic field )
= ( 4π * 10^-7 * 3.5 ) / ( 2π * 0.150 )
= 4.4*10^-6 / 0.94
= 4.7 * 10^-6 T
In the nitrogen cycle, plants take in nitrates and convert them into
Read each example and identify whether the data are observations or inferences from observations. The fish’s ventral fin measured 8.5 cm long.
Answer:
Observation
Inference
Inference
Observation
Inference
Explanation:
An example of conservation of angular momentum is jumping on a Merry-Go-Round. Watch this video (it starts part way through but the only thing you miss is the people pushing the Merry-Go-Round) to see someone jumping on a Merry-Gr-Round in motion like this problem. You can model the Merry-Go-Round as a solid disk with a radius of 2.70 m and a mass of 77.0 kg. Initially the Merry-Go-Round has an angular velocity 7.40 radians / second. Then the person jumps on and change the Moment of Inertia of the system. The person lands on the outer edge of the Merry-Go-Round and has a mass of 58.0 kg. What is the final angular velocity of the system after the person jumps on
Answer:
ωf = 2.95 rad/sec
Explanation:
Assuming no external torques acting while the person jumps on, total angular momentum must be conserved.Angular momentum for a rotating rigid body can be expressed as follows:[tex]L = I * \omega (1)[/tex]
where I = moment of inertia regarding the rotating axis, and ω= angular velocity.Since total angular momentum must be conserved, this means that the following equality must be satisfied:[tex]L_{o} = L_{f} (2)[/tex]
The initial angular momentum, taking into account that the Merry-Go-Round can be modeled as solid disk, can be expressed as follows:[tex]L_{o} = I_{o} * \omega_{o} = \frac{1}{2}* M* R^{2}* \omega_{o} =\\ \frac{1}{2} * 77.0 kg* (2.70m)^{2}* 7.40 rad/sec = 2076.92 kg*m2*rad/sec (3)[/tex]
The final angular momentum, is just the product of the new moment of inertia times the final angular velocity.The new moment of inertia, is just the sum of the original moment of inertia I₀ and the moment of inertia due to the person that jumps on.Assuming that we can treat him as a point mass, his moment of inertia is just the product of his mass times to the distance to the axis of rotation (the radius of the Merry-Go-Round) squared.So, we can write the new moment of inertia If as follows:[tex]I_{f} = I_{o} +( m_{p} * R^{2}) = (\frac{1}{2} * M* R^{2}) + ( m_{p} * R^{2}) =\\ (\frac{1}{2} * 77.0 kg* (2.70m)^{2}) +( 58.0 kg * (2.70m)^{2}) = \\ 280.67 kg*m2 + 422.82 kg*m2 = \\ 703.49 kg*m2 (4)[/tex]
The final angular momentum can be written as follows:[tex]L_{f} = I_{f} * \omega_{f} (5)[/tex]
Since (3) and (5) must be equal each other, replacing If by its value from (4) in (5), we can solve for ωf, as follows:[tex]\omega_{f} = \frac{L_{o} }{I_{f}} = \frac{2076.92kg*m2*rad/sec}{703.49kg*m2} = 2.95 rad/sec (6)[/tex]
a car is traveling with a velocity of 40 m/s and has a mass of 1120kg the car has kinetic energy
what is molecular force and gravitational force with their examples .
Answer:
Gravitational force is the force of attraction on a body by earth. Example - Leaves and fruits fall from a tree downwards towards the ground due to the gravitational pull. ... T-shirt for is basically the force Of attraction On a body And this force of attraction on the body is by Earth.
Intermolecular forces act between molecules. ... Intermolecular forces are weaker than intramolecular forces. Examples of intermolecular forces include the London dispersion force, dipole-dipole interaction, ion-dipole interaction, and van der Waals forces.
Explanation:
Explanation:
I am sure you are Clear. Thanks.
The more mass an object has,the less inertia the object has. True or False
Answer:
This is true. objects that have a greater mass has greater interia. which also means objects that have a less mass has also less interia.
Explanation:
i hope this helps!!!
Will give brainliest!!
How much KClO3 is needed to make a saturated solution in 100 mL of water at 70⁰ C?
Answer:
iam not sure but I think its NaNO3
Two out-of-tune flutes play the same note. One produces a tone that has a frequency of 246 Hz, while the other produces 289 Hz. When a tuning fork is sounded together with the 246-Hz tone, a beat frequency of 18.0 Hz is produced. When the same tuning fork is sounded together with the 289-Hz tone, a beat frequency of 25.0 Hz is produced. What is the frequency of the tuning fork
Answer:
[tex]264\ \text{Hz}[/tex]
Explanation:
Beat frequency of the first case = 18 Hz
Beat frequency of the second case = 25 Hz
Tone of first fork = 246 Hz
Tone of second fork = 289 Hz
First case
Beat frequency is given by
[tex]\Delta f=|f_2-f_1|\\\Rightarrow f_1=246\pm18\\\Rightarrow f_1=264, 228\ \text{Hz}[/tex]
Second case
[tex]f_2=289\pm 25\\\Rightarrow f_2=264, 314\ \text{Hz}[/tex]
The frequency of the tuning fork is [tex]264\ \text{Hz}[/tex].
Which statement best explains the difference between longitudinal and transverse waves?
A: Longitudinal waves have troughs, while transverse waves have crests.
B: Longitudinal waves transfer energy while transverse waves do not
C: Longitudinal waves produce energy, while transverse waves consume energy
D: Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave.
pls put the letter in the answer
Answer:
the answer here would be A
The statement that best explains the difference between longitudinal and transverse waves is D: Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave. The correct option is D.
What is a wave?A wave is a disturbance that propagates through space and time, transferring energy without transferring matter. Waves can be found in various forms, such as sound waves, light waves, and water waves.
A transverse wave is a type of wave where the particles of the medium vibrate perpendicular to the direction of wave propagation.
In other words, the motion of the particles is at right angles to the direction of the energy transfer. A common example of transverse waves is light waves.
A longitudinal wave is a type of wave where the particles of the medium vibrate parallel to the direction of wave propagation. The motion of the particles is in the same direction as the energy transfer. An example of longitudinal waves is sound waves.
In a longitudinal wave, particles in the medium oscillate back and forth along the direction of the wave, creating areas of compression and rarefaction. In a transverse wave, particles in the medium oscillate up and down, creating crests and troughs.
Therefore, the correct statement is Particles in longitudinal waves travel in the direction of the wave, while particles in transverse waves travel perpendicular to the wave(D).
To know more about the amplitude of a wave click:
https://brainly.com/question/29775285
#SPJ3
Speed and time play a major factor in:
Scrimmage
Tactical movement
Situation awareness
Drill
Answer:
Tactical movement
Explanation:
Speed and time play a significant factor in Tactical movement. The correct option is B.
What is a Tactical movement?Tactical movement refers to the coordinated and strategic movement of military units or teams to achieve a specific objective. It is a fundamental aspect of military operations and involves the use of various tactics and techniques to move troops and equipment safely and efficiently on the battlefield.
Tactical movement can involve various modes of transportation, such as on foot, in vehicles, or by air. It also involves the use of cover and concealment to avoid detection by the enemy, and the use of communication and signal systems to coordinate movements and maintain situational awareness.
The success of the tactical movement depends on many factors, including the terrain and weather conditions, the size and composition of the units involved, the available resources and equipment, and the tactics and strategies employed by both friendly and enemy forces. It requires careful planning, training, and execution to ensure that the movement is successful and achieves the desired outcome.So, tactical movement is an essential component of military operations, and plays a critical role in achieving victory on the battlefield.
Here in the Question,
Tactical movement refers to the movement of military units or teams in a coordinated and strategic manner to achieve a specific objective. In such movements, speed and time are critical factors because they determine the success or failure of the mission. The speed of movement can help to surprise the enemy, take advantage of a weakness in their defense, or seize a key position before they can respond. Time is also important because the longer it takes to achieve the objective, the more likely the enemy is to detect and counter the movement. Therefore, tactical movement requires careful planning and execution to ensure that the right units move at the right speed and at the right time to achieve the desired outcome.
Therefore, the correct option is B i.e Tactical movement.
To learn about Kinetic energy click:
https://brainly.com/question/26472013
#SPJ2