What can you say about the forces between the particles of these gases)
Answer:
Gas – In a gas, particles are in continual straight-line motion. The kinetic energy of the molecule is greater than the attractive force between them, thus they are much farther apart and move freely of each other. In most cases, there are essentially no attractive forces between particles.
Explanation:hopes this helps:)
Which of the following are HETEROGENEOUS mixtures from this list (check all that apply).
A. Air
B. Sweet Tea
C. Trail mix
D. Soil
E. Beach sand
F. Water
HELPPPP ASAPP 10 POINTS
pls help it's about density
C
ot 헤
C.
Show that the results of these dulys
Calculate the oxidation state of Manganese in the following
i. KMnO4 ii. Mno4-
i) KMnO4
lets calculate using x method
1+x+ 4(-2) = 0
1+x-8 =0
x= 7
ii)MnO4‐
x+4(-2) = -1
x-8 = -1
x = 7
How is a radioactive element different from a stable element?
Radioactive elements are the elements into which an atom is very unstable or highly reactive because it is having more energy in its nucleus. stable elements are those who have stable and there shell are properly filled with electrons.
What are radioactive elements and stable elements?Most radioactive chemical elements have one or more radioactive isotopes on the other hand some chemical elements only have one type of radioactive isotopes.
A radioactive element has an unstable nucleus that emits particles in the form of alpha, beta, or gamma radiation and stable element have stable nucleus with no effect of any radiation or energy due to fully filled orbitals.
Bombarding of these radiations has to be done in the nucleus of the element after this the desired element will become a radioactive element. And there is no effect of these rays on stable elements beacuse they are unreactive to this.
The ray of alpha beta and gamma consists of some charges within them and they are radioactive radiations harmful to human eyes.
Learn more about radioactive elements, here:
https://brainly.com/question/13234158
#SPJ2
what type of reaction is Pb + CuCl2 ---> PbCl2 + Cu
The above reaction is a Single displacement reaction , in which lead (Pb) being more reactive displaces Copper (Cu) from its compound [tex](\mathrm{CuCl_2})[/tex] and forms Lead Chloride [tex](\mathrm{PbCl_2})[/tex].
[tex] \boxed{\mathrm{Pb + CuCl_2 \rightarrow PbCl_2 + Cu}}[/tex]
_____________________________
[tex]\mathrm{ \#TeeNForeveR} \: ☃[/tex]
Collisions only result in a reaction if the particles collide with a certain maximum energy called the activation energy of the reaction.
Answer: The statement collisions only result in a reaction if the particles collide with a certain maximum energy called the activation energy of the reaction, is false.
Explanation:
Activation energy is the minimum amount of energy required to initiate a chemical reaction.
So, when activation energy for a reaction is lower then molecules with lower energy can also participate in the reaction. As a result, more number of collisions will take place due to which an increase in the rate of reaction will takes place.
When activation energy for a reaction is larger then molecules with higher energy will not be able to participate in the reaction. As a result, less number of collisions will take place due to which a decrease in rate of reaction will occur.
Therefore, we can conclude that the statement collisions only result in a reaction if the particles collide with a certain maximum energy called the activation energy of the reaction, is false.
Answer:
true
Explanation:
particularly must collide with energy equal to or greater the
2
A chart with the densities of four metals is shown.
Metal
Density (gicm')
Titanium
4.5
Zinc
7.1
Nickel
88
Silver
10.5
Students were given a sample of an unknown metal and told to determine
its density. They measured its mass as 26.4 g and its volume as 3.0 cm?
Use the chart to determine which metal the students were given.
Answer:
mass(m)=26.4g
volume (v)=3.0cm²
we have
density =m/v=26.4/3=8.8g/cm³
since it is equal to density of nickel.
Option C nickel is a required answer.
Answer:
[tex]\huge\boxed{\fcolorbox{green}{yellow}{option \: \: c}}[/tex]
Balance the following equations.
Answer:
A) Mg + H2SO4 → MgSO4 + H2
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
C) CaO + H2O → Ca(OH)2
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
Explanation:
A) Mg + H2SO4 → MgSO4 + H2
The equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
B) CaCO3 + 2HCl → CaCl2 + H2O + CO2
This equation is balanced by putting 2 in front of HCl on the left hand side to balance the elements on the right hand side.
C) CaO + H2O → Ca(OH)2
Thus equation is already balanced because the number of each element in the left hand side is already equal to that in the right hand side.
D) 3Ag + 4HNO3 → 3AgNO3 + H2O + NO2
This equation is balanced by putting 3 in front of Ag and 4 in front of HNO3 on the left hand side while we put 3 in front of AgNO3 on the right side to balance the elements on the right hand side.
PLEASE HELP QUICKLY!!
I know it's not A or B; I just can't figure it out between C and D.
---
What will most likely happen when a component is added to a reaction system at equilibrium?
A. The system will be unaffected by stress.
B. The addition of a catalyst will change the equilibrium.
C. The equilibrium position will shift away from what was added to lower its concentration.
D. The equilibrium position will shift away from what was added to increase its concentration.
Answer:
c: The equilibrium position will shift away from what was added to lower its concentration.
Explanation:
Answer: C. The equilibrium position will shift away from what was added to lower its concentration.
Explanation:
If we have a system that is already in equilibrium, the addition of an extra amount of one of the reactants or one of the products throws the system out of equilibrium. Either the forward or the reverse reaction will then occur to restore equilibrium conditions.
How many liters of hydrogen are obtained from the reaction of 4.00 g sodium with excess water, at STP?
Answer:
V = 1.95 L.
Explanation:
Hell there!
In this case, according to the following reaction between sodium metal and water:
[tex]2Na+2H_2O\rightarrow 2NaOH+H_2[/tex]
We can realize that the moles of hydrogen can be calculated by using the initial mass of sodium, its atomic mass (23.0 g/mol) and the 2:1 mole ratio of sodium to hydrogen to obtain:
[tex]4.00gNa*\frac{1molNa}{23.0gNa} *\frac{1molH_2}{2molNa}=0.0870molH_2[/tex]
Finally, we calculate the volume of hydrogen by using the ideal gas equation whereas the pressure is 1 atm and the temperature 273.15 K according to the STP conditions:
[tex]PV=nRT\\\\V=\frac{nRT}{P}\\\\V=\frac{0.0870mol*0.08206\frac{atm*L}{mol*K}*273.15 K}{1 atm}\\\\V=1.95L[/tex]
Regards!
0.630 moles of sodium chloride are how many grams (with calculation)
Answer:
Heyaa!! Im Pinky and Im here to inform you that your answer is...
Explanation:
!!! 36.8189451 Grams !!!
Have an amazing day!!!
~Pinky~!!
Plz Answer Fam & Con Chemistry (8TH GRADE)
Answer:
claw techniques
Explanation:
because it is
Select the correct answer.
A compound has an empirical formula of C2H5. What is true about this empirical formula?
ОА It models the structure of the compound.
ОВ. It shows the ratio of elements in the compound.
Ос. . It gives the mass of each atom in the compound.
OD. It indicates the number of atoms in the compound.
O E. It describes only this one compound.
Answer: OB
Explanation:
The empirical formula of an element is the simplest formula of an element which shows the ratios of atoms of the each element present in a molecule of a compound .
What can be different between the products and reactants in a balanced chemical equation?
Answer:Reactants are starting materials and are written on the left-hand side of the equation. Products are the end-result of the reaction and are written on the right-hand side of the equation.
Explanation:
The reactants in a balanced chemical reaction are the starting material which reacts together to give the products in by the regrouping of atoms in the reactants.
What is a balanced chemical equation?The balanced chemical equation of a reaction represents the perfect stoichiometry of each reactants and products with their states of matter in brackets.
In a balanced reaction, the number of each element in the reactant side must be equal to their number in the product side. The number of each elements and groups in a reaction can be balanced by multiplying with suitable integers.
The atoms in the reactants are regrouping to form the products. Thus, the identity of the new products is entirely different form that of reactants in the reaction.
To find more on balanced reactions, refer here:
https://brainly.com/question/14280002
#SPJ2
The best way to increase the amount of a solid solute dissolved in a saturated solution would be to
Answer:
The solubility of a saturated solution can be increased by increasing the temperature.
Explanation:
Temperature -- Generally, an increase in the temperature of the solution increases the solubility of a solid solute. For example, a greater amount of sugar will dissolve in warm water than in cold water. A few solid solutes, however, are less soluble in warmer solutions.
Which statement is true in comparison to a weak acid, a strong acid
has a larger ph than weak acids
is more concentrated than we gases
strong acids produced less H plus ions is mostly H plus ions in solution
Answer: Strong acid vs weak acid
Strong acids and strong bases refer to species that completely dissociate to form ions in solution.
Explanation: By contrast, weak acids and bases ionize only partially, and the ionization reaction is reversible. Thus, weak acid and base solutions contain multiple charged and uncharged species in dynamic equilibrium.
How many days does it take the moon to orbit the Earth once.
Answer:
27.3 days
Explanation:
I really have no explanation lol.
Answer:
Hope thia helps
Explanation:
it takes 27.3 days!!!
Write the molecular formula of poly(glycine)
Answer:
C2H5NO2
Explanation:
Glycine | C2H5NO2 - PubChem.
weight of glycine= 75.07 g/mol
no links pls it’s very unhelpful
answer : i don’t knowww :)
Right spelling:
Answer: I don’t know. :)
Would an alkali metal make a good replacement for tin in a tin can? Explain.
Answer:
No
Explanation:
If tin is heated, it can react with alkalis' with the release of hydrogen.
Tin is a great metal that is used for packaging purposes.
It does not react with any acid that may be present in the food material stored inside the tin can which makes it a useful metal. It keeps the food safe.However, if the tin in the tin can is replaced with alkali metals then they will readily react with the acid present in the food materials stored inside, thereby rendering the food unsafe.
https://brainly.com/question/18153051
ILL MARK BRAINLIEST :)
Describe the law of conservation of mass in your own words *DO IT IN YOUR OWN WORDS PLEASE*
Explanation:
According to the law of conservation of mass, mass can neither be created nor destroyed but it can simply be transformed from one form to another.
For example, [tex]Na^{+} + Cl^{-} \rightarrow NaCl[/tex]
Mass of Na = 23 g/mol
Mass of Cl = 35.5 g/mol
Sum of mass of reactants = mass of Na + mass of Cl
= 23 + 35.5 g/mol
= 58.5 g/mol
Mass of product formed is as follows.
Mass of NaCl = mass of Na + mass of Cl
= (23 g/mol + 35.5) g/mol
= 58.5 g/mol
As mass reacted is equal to the amount of mass formed. This shows that mass is conserved.
As a result, law of conservation of mass is obeyed.
List ways on how to lessen human impacts in the environment
Answer:
Explanation:
Completely turn off equipment like televisions and stereos when you're not using them.
Choose energy-efficient appliances and light bulbs.
Save water.
Lower your shades or close your curtains on hot days, to keep the house cool and reduce the use of electric fans or air-conditioning.
Let clothes dry naturally.
Keep lids on pans when cooking to conserve energy.
Use rechargeable batteries.
Don’t use “throw away” products like paper plates and napkins, or plastic knives, forks and cups.
Send electronic greetings over email, instead of paper cards.
PLSSS HELP WITH THIS ASAP
Answer:
the property of air shown in the figure describe A.mass
Describe the law of conservation of mass in your own words *DO IT IN YOUR OWN WORDS PLEASE*
Answer:
Chemical reactions and physical transformations do not create or destroy mass in an isolated system, according to the law of conservation of mass. The mass of the products in a chemical reaction must equal the mass of the reactants, according to the conservation of mass law. The law of conservation of mass can be used to solve for unknown masses, such as how much gas is consumed or produced during a reaction.
Water and oil are "immiscible", meaning they do not mix but stay
separated when combined in a glass. What is the best explanation for this?
1.both are polar molecules
2.both are nonpolar molecules
3.water is a polar molecule and oil is a nonpolar molecule
4.water and oil are both compounds
Answer:
Good luck man
Explanation:
Good luck man
Which is the correct Lewis dot structure of NH2?
H-N-H
H-N-H
A.
B.
N-H-H
H-N-H
C.
D.
-H-N-H
E.
ОА А
ов. В
C C
OD D
ОЕ Е
Answer:
D
Explanation:
Name the sub atomic particles in part Z of a boron atom give the relative charges of these sub atomic particles
Answer:
Neutrons and protons
Explanation:
There are three fundamental subatomic particles, these are;neutrons protons and electrons.
Ernest Rutherford successfully showed that every atom does possess a central core that contain positively charged particles (protons) called the nucleus. Chadwick later discovered the existence of neutrons.
Both protons and neutrons are found in the nucleus. Z represents the nucleus of the boron atom and houses the neutrons and protons of the boron atom.
Iodine-131 half life 8.040 how long will it take for a 40 gram sample of iodine-131 to decay to 0.75 grams
Answer:
See explanation below
Explanation:
To get this, we need to apply the general expression for half life decay:
N = N₀e(-λt) (1)
Where:
N and N₀ would be the final and innitial quantities, in this case, masses.
t: time required to decay
λ: factor related to half life
From the above expression we need λ and t. To get λ we use the following expression:
λ = t₁₂/ln2 (2)
And we have the value of half life, so, replacing we have:
λ = 8.04 / ln2 = 11.6
Now, we can replace in (1) and then, solve for t:
0.75 = 40 exp(-11.6t)
0.75 / 40 = exp(-11.6t)
ln(0.01875) = -11.6t
-3.9766 = -11.6t
t = -3.9766 / -11.6
t = 0.34 days