What is the speed of light written in standard numerical form?

Answer:

Chemical bonds

Explanation:

Because it has an image of atoms being held together by chemical bonds.

The solid would be caught on a filter paper or membrane while the liquid passes through.

Filtration is used to separate a mixture of insoluble substances in a liquid.

Since the aim is to separate the insoluble component of the mixture from the liquid, filtration using a suitable filter paper or membrane will be the way out.

The liquid will pass through the filter paper or the membrane while the insoluble component will be caught. This can then be dried and collected accordingly.

More on filtration can be found here: https://brainly.com/question/12674010

#SPJ1

Answer:

During DNA replication, each of the two strands that make up the double helix serves as a template from which new strands are copied. The new strand will be complementary to the parental or “old” strand. Each new double strand consists of one parental strand and one new daughter strand.

Explanation:

hope it helps you

The actual yield of the experiment given the data from the question is 92.4 g (Option B)

This is the ratio of the actual yield to the theoretical yield of a given reaction multiplied by 100

Percentage yield = (Actual / Theoretical) × 100

This is the amount obtained from the expriment procedures

This is the amount obtained from simple calculations as regarding the experiment.

Actual yield = percentage yield × theoretical yield

Actual yield = 80.34% × 115

Actual yield = 0.8034 × 115

Actual yield = 92.4 g

Learn more about stoichiometry:

https://brainly.com/question/14735801

#SPJ1

The equilibrium constant of the reaction is represented by the symbol K. Thus, option C is the correct and accurate statement about the equilibrium constant.

The equilibrium constant is a representation of the concentration of the products and the reactants of the reaction that is raised to the powers through their stoichiometry coefficient.

Its value varies and changes at different temperatures and is not always less than 1. The equilibrium constant is the ratio of the coefficient of the products to reactants.

Therefore, option C. equilibrium constant is represented by K is true.

Learn more about the equilibrium constant here:

https://brainly.com/question/12429748

#SPJ1

Americium is a radioactive element .

The nuclear reaction.is given by

[tex]\rm {}^{241}_{95}Am\longrightarrow {}^{237}_{93}Np+{}^4_2\alpha[/tex]

Here alpha can be written as He too

When a solid dissolves in a liquid to form a solution, solid particles become evenly dispersed among liquid particles.

Solutions are formed when a solute particle dissolves in another substance known as a solvent.

Usually, solutions are formed when solids dissolve in liquids.

The solid is the solute while the liquid is the solvent.

When a solid dissolves in a liquid, solid particles become evenly dispersed among liquid particles.

Therefore, solutions are formed when solute particles dissolve in solvents.

Learn more about solutes and solutions at: https://brainly.com/question/25326161

#SPJ1

Answer:

c

Explanation:

chem ed 2022

Salt and sugar have strong attractive forces whereas oil has weak attractive forces between particles.

The attractive forces between particles in the salt and sugar substances have strong because of its solid state while on the other hand, the attractive force between particles of oil is weak because of its liquid state.

So we can conclude that salt and sugar have strong attractive forces whereas oil has weak attractive forces between particles.

Learn more about force here: https://brainly.com/question/12970081

#SPJ1

The strength of the attractive forces between the molecule of oil, sugar and salt increases from oil to sugar to salt.

The melting point of a substance is the temperature at which the solid substance melts.

The melting point of a substance is a constant for a pure substance.

The higher the attractive forces between the molecules of a substance, the higher the melting point will be.

Between the three substances, oil has the lowest melting point while salt has the highest melting point.

Therefore, the strength of the attractive forces between the molecule of oil, sugar and salt increases from oil to sugar to salt.

Learn more about melting point at: https://brainly.com/question/40140

#SPJ1

Answer:

Coating a material with metal

(SInce the glasses will be coated with gold.)

Answer:

Energy can neither be created nor destroyed, but it does change its form. And not all forms of energy are usable and it gets dissipated as heat energy and sound energy. The energy that is wasted cannot be recovered.

The maximum volume of hydrogen evolved at room temperature and prressure after taking excess zinc with 0.01 mol HCl is 2.4 [tex]dm^{3}[/tex]

hence correct option is (C)

According to this law, the product of the pressure and the volume of one gram molecule of an ideal gas is equal to the product of the absolute temperature of the gas and the universal gas constant.

Given Equation ;

Zn + 2HCl --> [tex]ZNCl_2[/tex] + [tex]H_2[/tex]

Given Quantities ;

Amount of Zinc = Excess

Amount of 1.0 mol/ltr HCl = 100 ml

It means, Number of moles of H = 0.1 mole

Temperature = 298 K

Pressure = 1 Atm

This is a “single state” problem, so we can solve it using the ideal gas law, PV = nRT.

therefore, using Ideal gas equation ;

PV=nRT

1 x V = 0.1 x 0.0821 x 298

volume of hydrogen gas = 2.4 litre ie, 2.4 [tex]dm^{3}[/tex]

Learn more about ideal gas here ;

https://brainly.com/question/14841193

#SPJ1

Answer:

increasing the pressure

Explanation:

You can make a solution more concentrated by increasing the pressure.

The volume of excess oxygen will 2.28 L

From the equation of the reaction:

[tex]CH_4(g) + 2O_2(g) --- > CO_2(g) + 2H_2O(g)[/tex]

The mole ratio of the two reactants is 1:2.

1 mole of gas at STP = 22.4 L

Mole of 29.2 L of methane at STP = 29.2/22.4 = 1.3 moles

Mole of 63.3 L of oxygen at STP = 63.3/22.4 = 2.8 moles.

Thus, oxygen is in excess because 1.3 x 2 = 2.6 moles is needed to react with 1.3 moles methane.

Excess mole of oxygen = 2.8 - 2.6 = 0.2 moles

Volume of 0.2 moles at STP = 22.4 x 0.2 = 2.28 L

More on stoichiometric calculations can be found here: https://brainly.com/question/27287858

#SPJ1

Answer:

Decomposition begins at the moment of death, caused by two factors: 1.) autolysis, the breaking down of tissues by the body's own internal chemicals and enzymes, and 2.) putrefaction, the breakdown of tissues by bacteria.

Explanation:

hope it will help you

Electrical engineers are the scientists that study the production of electricity more efficient.

Electrical engineers are the type of scientist that would most likely study how electricity could be produced more efficiently because they produced new technologies which are cost efficient as well as produce high amount of electricity.

So we can conclude that electrical engineers are the scientists that study the production of electricity more efficient.

Learn more about electricity here: https://brainly.com/question/776932

#SPJ1

The conductance of the electric current through the electrolytic solution increases with increase in concentration.

An electrolytic solution is a solution containing dissolved electrolyte.

The ions of the electrolyte dissociate and are able to carry electric current around the electrolytic cell.

The higher the concentration of the electrolyte, the more electric current it can conduct due to greater number of ions present.

Therefore, the conductance of the electric current through the electrolytic solution increases with increase in concentration.

Leran more about electrolytes at: https://brainly.com/question/1961090

#SPJ1

Answer: The answer is true.

Explanation: Avogadro's number is a mole, which concludes that this statement is true.

Answer:

The slope of the trend line is 2.55; as the temperture.

Explanation:

multiplying terrorist to power 23, divided by 96. Multiplied by 12.7. so this is 76.48

7.96 x 10²² particles would be found in a 12.7g sample of ammonium carbonate. A particle is a tiny, localized item.

A particle is a tiny, localized item that may be defined by a number of physical or chemical characteristics, including volume, density, and mass. They range significantly in size or number from tiny particles like atoms to subatomic particles such as the electron.

Depending upon their density, particles can potentially be utilized to mimic even bigger things, such as moving celestial bodies or a throng of people. Although the meaning of the word particle is quite broad, different scientific disciplines might refine it as necessary. Any substance made up of particles is referred to as a particulate.

number of moles = given mass/ molar mass

                            = 12.7/  96.08

                            = 0.13moles

number of particle=  0.13 ×   6.022×10²³  

                              = 7.96 x 10²²    

Therefore, 7.96 x 10²² particles would be found in a 12.7g sample of ammonium carbonate.

To know more about particles, here:

https://brainly.com/question/27894549

#SPJ2

The balanced redox reaction, if it occurs in acidic solution, is

5C₂O₄²⁻(aq) + 2MnO₄⁻(aq) + 16H⁺-----> 10CO₂(g) + 2Mn²⁺(aq) + 8H₂O(l)

Redox reactions are those in which loss and again of electrons occur.

To balance the redox reaction, we must first break the whole reaction into half equations;

Oxidation half equation

[tex]\rm 5C_2O4^2^-(aq) + 10e + 8H^+----- > 10CO_2(g) + 4H_2O(l)[/tex]

Reduction half equation

[tex]\rm 2MnO_4^- (aq) + 10e + 8H^+----- > 2Mn^2+(aq) + 4H_2O(l)[/tex]

Now combine both the reactions

[tex]\rm 5C_2O_4^2-(aq) + 2MnO4^- (aq) + 16H^+----- > 10CO_2(g) + 2Mn^2+(aq) + 8H_2O(l)[/tex]

Thus, the coefficient of H₂C₂O₄ is 5 and that of water is 8.

Learn more about redox reactions

https://brainly.com/question/13293425

#SPJ4

The chemical element that is formed when I-131 undergoes beta-minus decay is Xe.

A beta minus decay is one in which an electron is changed into a proton. The atomic number of the daughter nucleus will increase by one unit and is one place after the parent in the periodic table.

The chemical element that is formed when I-131 undergoes beta-minus decay is Xe.

Learn more about beta decay:https://brainly.com/question/25455333

#SPJ1

The mass of [tex]Na_2CO_3[/tex] that will be required to be dissolved in water would be 15.9 grams

Recall that:  molarity = mole/volume in L

In this case, the volume is 0.3 L and the molarity is 0.5 M.

Thus, mole = molarity x volume = 0.5 x 0.3 = 0.15 moles

Mass of 0.15 moles  [tex]Na_2CO_3[/tex] = 0.15 x 106 = 15.9 grams

More on solution preparation can be found here: https://brainly.com/question/14667249

#SPJ1

Answer:

1.3 M

Explanation:

The formula mass of lithium fluoride is 7+19=26 g/mol. This means that in 52 grams of LiF, there is 2 moles.

Molarity = (moles of solute)/(liters of solution), so the answer is 2/1.5 = 1.3 M

In this case, among the list of components given, the abiotic factors are water, rock, soil, and sun.

An abiotic factor is a non-living part of an ecosystem that shapes its environment.

Biotic and abiotic factors make up a community via interaction.

Biotic factors are considered living things (having "life") while abiotic factors are simply non-living things.

Hence, in this case, among the list of components given, the abiotic factors are water, rock, soil, sun

Learn more about the abiotic factor here:

https://brainly.com/question/10111151

#SPJ1

[tex] \begin{gathered}\\ \underline{\boxed{\large\leadsto\frak\red{ Answer :- }}} \\ \end{gathered}[/tex]

What is an abiotic factor?

♠ Among the list of components given, the abiotic factors are water, rock, soil, sun

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

In this model, electrons are found on unique levels and when jumping from one level to another, electrons emit light at a specific wavelength.

The Bohr model is an atomic model describing the properties of atoms and their constituents (electrons).

This model states different atoms have specific levels of energy where electrons can be located.

In conclusion, in this model, electrons are found on unique levels and when jumping from one level to another, electrons emit light at a specific wavelength.

Learn more about the Bohr model here:

https://brainly.com/question/18002213

#SPJ1

Answer:

In the Bohr model, electrons can exist only in certain energy levels surrounding the atom. The energy levels in each atom are unique. When electrons jump from a higher energy level to a lower one, they emit light at a wavelength that corresponds to the energy difference between the levels.

Explanation:

Ed22

Addition of pure water does not change pH of a solution because pure water has neutral pH.

Even though you continue to add pure water into a substance, the acidity or alkalinity of substance still remains the same to that of substance because pure water has neutral pH which can't change the acidity or alkalinity of a solution.

So we can conclude that addition of pure water does not change pH of a solution because pure water has neutral pH.

Learn more about acid here: https://brainly.com/question/25148363

#SPJ1

Answer:

In water, bases dissolve and provide hydroxide (OH-) to the surrounding solution. This lowers the acidity of the solution.