D
Explanation:
B/c both the hydrogen and chlorine have the same valance number so if a metal or non metal have the same valance number you should cancel out the numbers and you will have to put only the non metal or metals.
What is the formula for the carboxylic acid functional group?
OA. -CH3
OB. -COH
0 с. -соон
OD. -CO-
Answer: C
Explanation:
This is a fact.
A scientist stores a very large number of particles in a container. In order to determine the number of particles, the scientist measures the temperature, pressure, and volume of the container and calculates the moles using the ideal gas law. In order for the calculated value to have the greatest accuracy, the scientist should make sure that (select all the apply)
A the temperature is high
B the volume is high
C the pressure is high
D the ideal gas law is always accurate, the conditions will not matter
When the temperature and the volume of the gas stored in the container are high then the number of the moles will be measured accurately. Thus, options A and B are correct.
What is the ideal gas law?The ideal gas law is the establishment of the relation between the elements like the moles, pressure, temperature, and the volume of the gas containing the particle.
The ideal gas states:
PV = nRT
With an increase in the temperature, the number of particles that collides increases as the kinetic energy increases. The particle of the container is more when the volume of the gas is more.
Therefore, in options A and B high temperature and volume increase the accuracy.
Learn more about ideal gas here:
https://brainly.com/question/14552813
#SPJ1
chemistry can someone solve this?
eimetchuinsumuleavtubronAnswer:
Explanation:
So I’m in 6th grade and this is a chart. I need the # of molecules, # of atoms in each element and the total # of atoms 2H₂SO
Answer:
1.) 2 molecules
2.) 4 H atoms, 2 S atoms, 2 O atoms
3.) 8 total atoms
Explanation:
1.) 2 H₂SO
--------> The molecule is all of the elements bonded together (H₂SO). Because there is a coefficient of 2 in front of the molecule, this means that there are 2 molecules present.
2.) 2 H₂S₁O₁
---------> The number of atoms of each element is determined by the subscripts and the coefficients. In one molecule, there is one oxygen, one sulfur, and 2 hydrogen atoms (denoted by subscripts). Because there are two molecules, these values are doubled.
3.)
--------> The total number of atoms is calculated by adding the number of atoms of each element. If between 2 molecules there are 4 hydrogens, 2 sulfurs, and 2 oxygens, combined there would be a total of 8 atoms.
If you dissolve 25.0 g of NaNO3 (Mm = 85.0 g) in 155 mL of water, what is the molarity of the solution? (Report your answer to two places past the decimal point)
Answer:
1.90 M
Explanation:
To find the molarity of the solution, you need to use the molarity equation. This formula looks like this:
Molarity (M) = moles / volume (L)
To use this equation, you need to perform some conversions. You should (1) convert mL to L (by dividing by 1,000), then (2) convert grams NaNO₃ to moles (via molar mass), then (3) plug moles and volume into the molarity equation.
155 mL / 1,000 = 0.155 L
25.0 g NaNO₃ 1 mole
--------------------- x ----------------- = 0.294 moles NaNO₃
85.0 g
Molarity = moles / volume
Molarity = 0.294 moles / 0.155 L
Molarity = 1.8975....
Molarity = 1.90 M
law and the rate constant for the reaction.
PLEASE HELP!!!!.
A buffer solution was prepared by mixing 150.00 mL of 1.1341 mol/L of CH3COOH
and 100.00 mL of 0.831 mol/L of barium acetate. Determine the pH of the buffer
solution after the addition of 10.00 mL of 0.010 mol sulphuric acid. Kc for acetic acid
is 1.8 x 10-5
The pH of the buffer solution after the addition of sulfuric acid is determined as 4.43.
Initial moles of acid and base
The initial moles of acid and base conjugate is determined as follows;
n = CV
na₁ = (150 x 1.1341)/1000
na₁ = 0.17 mol
nb₁ = (100 x 0.831)/1000
nb₁ = 0.083 mol
Number of moles of the acid addedH₂SO4 ⇄ 2H²⁺ + SO₄²⁻
na₂ = (10 x 0.01)/1000
na₂ = 0.0001 mol
Final number of moles of the acid and basenb = 0.083 - 2(0.0001) = 0.0829 mol
na = 0.17 + 2(0.0001) = 0.1702 mol
pH of the buffer solution[tex]Ka = \frac{[CH_3COO][H^+]}{[CH_3COOH]} \\\\1.8\times 10^{-5} = \frac{0.0829(H^+)}{0.1702} \\\\H^+ = \frac{(1.8 \times 10^{-5})(0.1702)}{0.0829} \\\\H^+ = 3.696 \times 10^{-5}\\\\pH = -Log [H^+]\\\\pH = -Log (3.696 \times 10^{-5})\\\\pH = 4.43[/tex]
Thus, the pH of the buffer solution after the addition of sulfuric acid is determined as 4.43.
Learn more about buffer solutions here: https://brainly.com/question/8676275
#SPJ1
Consider 2.00 moles of Argon, an ideal gas, at a density of 5.00 g/L and a pressure of 2.00 atm. What is the closest value to the temperature (in K) of this gas?
Answer:
194.73 K
Explanation:
Use the Ideal Gas Law: PV = n RT
R = .082057366 L Atm / k-mole
2 moles Argon weigh in at 79.896 gm
79.896 gm / 5 gm/L = 15.9792 Liters
Ideal Gas Law:
(2)(15.9792) = 2 (.082057366) ( K)
194.73 K
Considering 2.00 moles of Argon, an ideal gas, at a density of 5.00 g/L and a pressure of 2.00 atm, the closest value to the temperature of the gas is approximately 39.01 K.
To find the temperature of the gas, we can use the ideal gas law equation:
PV = nRT
In this formula:
P = pressure (in atm)
V = volume (in L)
n = number of moles
R = ideal gas constant (0.0821 L·atm/mol·K)
T = temperature (in K)
Here it is given that:
P = 2.00 atm
V = 1 L
n = 2.00 moles
R = 0.0821 L·atm/mol·K
Now we can rearrange the equation to solve for T:
T = PV / (nR)
Substitute the given values:
T = (2.00 atm) x (16.00 L) ÷ (2.00 moles x 0.0821 L·atm/mol·K)
Calculate:
T ≈ 39.01 K
Thus, the closest value to the temperature of the gas is approximately 39.01 K.
For more details regarding temperature, visit:
https://brainly.com/question/7510619
#SPJ3
Name one similarity and one difference between visible light and sound.
Answer:
Light and sound both are waves, but sound requires a material medium to travel, and hence cannot travel in empty space while light can travel through vacuum but not through opaque materials. Both undergo refraction, diffraction and interference.
Explanation:
what type of solution forms when 25g of NaCI are dissolved in 100g of water at 30 degrees c
An unsaturated solution is formed when 25g of NaCI are dissolved in 100g of water at 30 degrees Celsius.
What is an unsaturated solution?A solution is formed as a result of the dissolution of a solute in a solvent.
However, based on the capacity of the solvent to take in more solute, a solution can be of three types namely;
Unsaturated solutionSaturated solutionSupersaturated solutionAn unsaturated solution is a solution whose solvent can dissolve more solute at a particular temperature.
According to this question, 25g of NaCI are dissolved in 100g of water at 30°C, hence, the solvent can take in more solute at 30°C.
Learn more about solutions at: https://brainly.com/question/18997806
#SPJ1
Give the postional isomers of 2 halopropane
(CH3)2CH
Give the positional isomers of 2 halopropane
(CH3)2CH
answer:
is in file download it
describe a weather station that will be used to collect weather data it should collect data that are needed to make forecasts. explain what data are needed how the station would be powered and any other relevant information . Then sketch it out
(please draw a sketch arigato)
The weather station is a place which contain instrument that collect data of atmospheric pressure, wind, humidity, etc to forecast weather. The weather station is powered by solar power.
What is a weather station?A weather station is a place that measure atmospheric conditions, on the basis of temp., pressure, wind speed, etc conditions.
They can be based either in land or sea. They are necessary to forecast any disaster, so we can prepare for the disaster.
Thus, the weather station is a place which contain instrument that collect data of atmospheric pressure, wind, humidity, etc to forecast weather. The weather station is powered by solar power.
Learn more about weather station
https://brainly.com/question/26164593
#SPJ1
The number of moles of Cr deposited by passing 1,5 F electricity in following reaction Cr+3e–– ›cr is
The number of moles of Cr deposited by 1.5 F of electricity is 0.5 moles
What is electrolysis?The term electrolysis has to do with thee deposition of a solid when a direct current is passed through its solution.
Given the reaction; Cr3+(aq) + 3e ––›Cr(s)
If 3F of electricity is required to deposit 1 mole of Cr
1.5F of electricity is required to deposit 1.5F * 1 mole/3F
= 0.5 moles
Learn more about electrolysis:https://brainly.com/question/12054569
#SPJ1
Which of the following happens during an endothermic chemical change? (5 points)
Group of answer choices
Heat is released.
Net energy decreases.
Products have a higher total potential energy than the reactants.
Products have the same total potential energy as the reactants..
Answer: Products have a higher total potential energy than the reactants.
Explanation:
During endothermic reactions, energy is absorbed, meaning that the products will have more potential energy.
The magnet below is cut in half. What will be the result
the cut pieces will have their own north and south pole
Which statement best describes the role of oxygen in cellular respiration?
OA. Oxygen molecules are a waste product of electron flow.
B. Oxygen molecules form as ATP molecules are made.
OC. Oxygen molecules form as sugar molecules are broken down.
OD. Oxygen molecules are used to make water molecules.
The role of oxygen in cellular respiration is to make water molecules. hence, option (D) is correct.
What is Cellular respiration ?
Cellular respiration is the process in which cells break down molecules for energy.
The cells use oxygen to break down food in the form of glucose to produce water and release carbon dioxide.
During aerobic cellular respiration, glucose reacts with oxygen, forming ATP that can be used by the cell. Carbon dioxide and water are created as byproducts.
In this reaction, energy is produced in the form of ATP that is used by the cell for its various activities.
Thus the correct answer is option D.
Learn more about respiration here ;
https://brainly.com/question/12605249
#SPJ1
A chemistry graduate student is studying the rate of this reaction:→2Cl2O5g+2Cl2g5O2gShe fills a reaction vessel with Cl2O5 and measures its
Rate = 1.321M/s[H₂CO₃]¹ ; k = 1.32M/s
How much volume (in cm^3)is gained by a person who gains 11.8 lb of our fat? Human fat has a density of 0.918 g/cm^3
The volume (in cm³) gained by a person who gains 11.8 lb of fat is 5830.49 cm³
What is density?The density of a substance is simply defined as the mass of the subtance per unit volume of the substance. Mathematically, it can be expressed as
Density = mass / volume
How to convert pounds to grams1 lb = 453.592 g
Therefore,
11.8 lb = 11.8 × 453.592
11.8 lb = 5352.3856 g
How to determine the volume Mass = 5352.3856 gDensity = 0.918 g/cm³Volume =?Volume = mass / density
Volume = 5352.3856 / 0.918
Volume = 5830.49 cm³
Learn more about density:
https://brainly.com/question/952755
#SPJ1
In a laboratory investigation, a student separates
colored compounds obtained from a mixture of
crushed spinach leaves and water by using paper
chromatography. The colored compounds
separate because of differences in
(1) molecular polarity
malleability
(3) boiling point
(4) electrical conductivity
Answer:
Molecular polarity
Explanation:
tell me if im right
How many grams are there in 9.6 x 1025 molecules of H2? Round your final answer to two decimal places.
Answer:
there are 310.64 grams in 9.40×10²⁵ molecules of H₂.
Explanation:
Amount of moles of H₂= (9.6 × 10²⁵ atoms × 1 mole) ÷ 6.023 × 10²³ atoms
amount of moles of H₂ = 155.32 moles
On the other hand, molar mass is the amount of mass that a substance contains in one mole. In this case, the molar mass of H₂ is 2 .
Then the mass that 155.32 mole of compound contains is calculated as:
155.32 moles × 2 = 310.64 grams
Finally, there are 310.64 grams in 9.40×10²⁵ molecules of H₂.
Moles of H_2
[tex]\\ \rm\Rrightarrow \dfrac{No\:of\: molecules}{Avagadro\:no}[/tex]
[tex]\\ \rm\Rrightarrow \dfrac{9.6\times 10^{25}}{6.023\times 10^{23}}[/tex]
[tex]\\ \rm\Rrightarrow 1.594\times 10^{2}[/tex]
[tex]\\ \rm\Rrightarrow 159.39mol[/tex]
Mass
[tex]\\ \rm\Rrightarrow Moles\times molar\:mass[/tex]
[tex]\\ \rm\Rrightarrow 159.39(2)[/tex]
[tex]\\ \rm\Rrightarrow 318.78g[/tex]
100 POINTS! Final Honor Activity Question
An unbreakable meteorological balloon is released from the ground. Ground level pressure is 98.5 kPa and the temperature is 18oC. The balloon contains 74.0 dm3 of hydrogen gas. As the balloon ascends, the pressure drops to 7.0 kPa.
What is the new volume of the balloon, assuming no temperature change?
If a temperature drop of 80oC occurs, what is the new volume of the balloon?
Of the two factors, pressure and temperature, which had the greatest effect in changing the volume of the balloon? Support your answer with your calculations.
Approximately 160 km above the Earth the pressure of the atmosphere is about 3.00 x 10-4 Pa and the temperature is about -180oC. If 100 cm of a gas at STP is released at this distance from the Earth, what volume would it occupy?
The change in temperature had the greatest effect at changing the volume of the balloon.
What are the gas laws?The gas laws are used to describe the parameters that has to do with gases.
Given that;
P1 = 98.5 kPa
T1 = 18oC or 291 K
V1 = 74.0 dm3
P2 = 7.0 kPa
V2 = ?
T2 = 18oC or 291 K
P1V1/T1 = P2V2/T2
P1V1T2 =P2V2T1
V2= P1V1T2/P2T1
V2 = 98.5 kPa * 74.0 dm3 * 291 K/ 7.0 kPa * 291 K
V2 = 1041.3 dm3
When;
V1 = 1041.3 dm3
T1 = 291 K
V2 = ?
T2 = 80oC or 353 K
V1/T1 = V2/T2
V1T2 = V2T1
V2 = V1T2/T1
V2 = 1041.3 dm3 * 353 K/291 K
V2 = 1263 dm3
The change in temperature had the greatest effect at changing the volume of the balloon.
Given that
V1 = 100 cm^3
T1 = 273 K
P1 = 1.01 * 10^5 Pa
V2 = ?
P2 = 3.00 x 10^-4 Pa
T2 = -180oC or 255 K
V2= P1V1T2/P2T1
V2 = 1.01 * 10^5 Pa * 100 cm^3 * 255 K / 3.00 x 10^-4 Pa * 273 K
V2 = 3.14 * 10^10 cm^3
Learn more about gas laws:https://brainly.com/question/12669509
#SPJ1
0.58 mol of Mg contains how many atoms? please show work
The number of atoms present in 0.58 mole of magnesium, Mg is 3.49×10²³ atoms
Avogadro's hypothesis1 mole of Mg = 6.02×10²³ atoms
How to determine the atoms in 0.58 mole of Mg1 mole of Mg = 6.02×10²³ atoms
Therefore,
0.58 mole of Mg = 0.58 × 6.02×10²³
0.58 mole of Mg = 3.49×10²³ atoms
Thus, 3.49×10²³ atoms are present in 0.58 mole of Mg
Learn more about Avogadro's number:
https://brainly.com/question/26141731
#SPJ1
Based on the following reaction, how much water is produced when oxygen react with 1 mole of C₂H8?
C₂H8 (g) + 40₂ (g) →2CO2 (g) + 4H₂O(g)
Answer:
4 moles
Explanation:
For every mole of deuteriomethane consumed, 4 moles of water are produced.
So, the answer is 4 moles.
what is chemistry
please help ASAP
Answer: Chemistry is the study of matter and the changes it undergoes.
An example of chemistry being used in the real world is how an ECG works. Chemistry is also sometimes considered the "central science". I hope this answer helped!! :)
What is the density of an object if its mass is 10 g and a volume of 2 mL?
Hi there! Let's solve this problem shall we!
⠀Volume = 10g
Mass = 2 mL
In this specific problem, they are asking us to find the density of the object. So, using the information given to us (volume and mass), let's solve the problem!
Now, if you remember, D = M ÷ V
So, let's fill in the blanks!
D = Our unknown value
M = 2mL
V = 10g
Here is the filled out formula:
D = M ÷ V
D = 2mL ÷ 10g
D = 5 g/mL
*Make sure you put the units for your final solution!*
Chemistry B Semester Exam
An unknown substance has a boiling point of 174°C. Which statement is true about this unknown substance? (1 point)
-It has a lower boiling point than water, and it likely has stronger electrostatic forces between its molecules
than water.
-It has a higher boiling point than water, and it likely has stronger electrostatic forces between its molecules
than water.
-It has a lower boiling point than water, and it likely has weaker electrostatic forces between its molecules
than water.
-It has a higher boiling point than water, and it likely has weaker electrostatic forces between its molecules
than water.
Answer:
See below
Explanation:
Boiling point of water is 100 C
this substance is higher boiling point and the molecules are likely with higher e-static forces
The unknown substance has a higher boiling point than water, and it has stronger electrostatic forces between its molecules than water. Therefore, option B is correct.
Boiling point is a measure of the temperature at which a substance changes from a liquid to a gas phase. Substances with higher boiling points generally have stronger intermolecular forces, such as hydrogen bonding or stronger dipole-dipole interactions.
Since the boiling point of the unknown substance is higher than that of water (which boils at 100°C), it suggests that the unknown substance likely has stronger electrostatic forces between its molecules compared to water.
Learn more about boiling point, here:
https://brainly.com/question/2153588
#SPJ2
Light refracts because:
000
it is reflected at a focal point.
it changes speed.
its frequency does not match the object it is striking.
All of the choices are correct.
Unit 1
Refraction is caused due to the change in speed of light when it enters from one medium to another. Hence, option B is correct.
What is refraction?Refraction happens when light changes direction, or bends when it moves from one material to another.
The cause of the refraction of light is that light travels at different speeds in different media.
This change in the speed of light when it moves from one medium to another causes it to bend.
Thus, refraction is caused due to the change in speed of light when it enters from one medium to another. Hence, option B is correct.
Learn more about the refraction here:
https://brainly.com/question/14760207
#SPJ1
how many oxygen molecules make up ozone
PLEASE HELP!!!
Choose from the given list of aqueous solutions (A-D).
Solution A has [H3O+] = 3.5×10-5 M.
Solution B has [H3O+] = 3.5×10-4 M
Solution C has [OH-] = 1.3×10-10 M
Solution D has [OH-] = 6.2×10-11 M
Which solution is the least acidic?
Which solution has the highest pH?
Which solution is the most basic?
Which solution is the least basic?
Find pH of all
#A
pH=-log[H+]
pH=-log[3.5×10^{-5}]pH=-log3.5+5pH=4.4#B
pH=-log3.5+4pH=3.4#C
pOH=-log[OH]
pOH=-log[1.3×10^{-10}]pOH=-log1.3+109.8pH=
14-9.84.2#4
pOH=-log6.2+11pOH=10.2pH
14-10.23.8So our answers
solution A is least acidicsolution A has the highest pHsolution A is most basicsolution B is least basicHeat that flows by conduction is the transfer of thermal energy between substances in contact. What must occur for this to happen? A. The two systems must be the same temperature.
B. The two systems must not be touching each another.
C. One system must have higher kinetic energy than the other system.
D. The thermal energy of one system must be the same as the thermal energy of the other system.
Answer:
c. one must have a higher kinetic energy than the other system
3) Convert 0.987 moles of Lithium to grams.
Answer:
6.850767 grams is the answer
[tex]0.987 ~ \text{moles of Li} = 0.987 \times \text{Molar mass of Li}\\\\~~~~~~~~~~~~~~~~~~~~~~~=0.987 \times 6.941~ g\\\\~~~~~~~~~~~~~~~~~~~~~~~=6.850767~ g[/tex]