According to Coulomb's law, the force between the given charges is 0.225N which is explained below.
Coulomb's Law:Force on two identical charges q separate by a distance of r is given by:
F = kq²/r²
where k is Coulomb's constant
q is the charge
r is the separation between the charges
Given that q = 1×10⁻⁵C,
and r = 2m
So, the force between the given charges will be:
F = (9×10⁹)(1×10⁻⁵)²/2²
F = 0.225N is the required force.
Learn more about Coulomb's law:
https://brainly.com/question/506926?referrer=searchResults
A 101 kg basketball player crouches down 0.380 m while waiting to jump. After exerting a force on the floor through this 0.380 m, his feet leave the floor and his center of gravity rises 0.920 m above its normal standing erect position. (a) Using energy considerations, calculate his velocity (in m/s) when he leaves the floor. m/s (b) What average force (in N) did he exert on the floor
Answer:
[tex]4.25\ \text{m/s}[/tex]
[tex]3391.22\ \text{N}[/tex]
Explanation:
y = Height of compression = 0.38 m
m = Mass of basketball player = 101 kg
h = Height of center of gravity after jump = 0.92 m
g = Acceleration due to gravity = [tex]9.81\ \text{m/s}^2[/tex]
Energy balance of the system is given by
[tex]mgh=\dfrac{1}{2}mv^2\\\Rightarrow v=\sqrt{2gh}\\\Rightarrow v=\sqrt{2\times 9.81\times 0.92}\\\Rightarrow v=4.25\ \text{m/s}[/tex]
The velocity of the player when he leaves the floor is [tex]4.25\ \text{m/s}[/tex]
[tex]Fy=mgy+\dfrac{1}{2}mv^2\\\Rightarrow F=\dfrac{mgy+\dfrac{1}{2}mv^2}{y}\\\Rightarrow F=\dfrac{101\times 9.81\times 0.38+\dfrac{1}{2}\times 101\times 4.25^2}{0.38}\\\Rightarrow F=3391.22\ \text{N}[/tex]
The force exerted on the floor is [tex]3391.22\ \text{N}[/tex].
Instead of changing the focal length of the lens, the eyes of amphibians work in a different manner: a set of muscles changes the shape of the eye which increases the distance between the front of the eye and the retina. The world's largest frog, the Goliath frog of west Africa, has an eye with a maximum size similar to a human's: 2.5cm. However, unlike a human, where the focal length is also 2.5cm, the focal length of the Goliath frog's eye is 2.146 cm. What is the maximum distance this frog can see
Answer:
The answer is "15.56 cm".
Explanation:
[tex]v= 2.5 \ cm\\\\f= 2.154 \ cm[/tex]
Calculating object of length is x so:
[tex]u= -x[/tex]
Using formula:
[tex]\to \frac{1}{v}-\frac{1}{u}=\frac{1}{f}\\\\\to \frac{1}{2.5}-\frac{1}{-x}=\frac{1}{2.154}\\\\\to \frac{1}{x}=\frac{1}{2.154}-\frac{1}{2.5}\\\\\to \frac{1}{2.5}-\frac{1}{-x}=\frac{1}{2.154}\\\\\to x= 15.56 \ cm[/tex]
If a virtual image is formed 10.0 cm along the principle axis from a convex mirror of focal length-15.0 cm, how far is the object from the mirror
Answer:
U=30cm
Explanation:
All you have to do is to put
Mirror formula , 1/f=1/u + 1/v
You should be careful in sign convention .
Virtual image is negative
we take focal length of convex lens negative even if its not given and so on...
In many places on Earth, humans are responsible for the removal of grasses, shrubs, trees, and other plants with roots that hold soil in place. This activity is best described by which of the following? *
A) deforestation
B) urbanization
C) air pollution
D) rise in sea level
Please help me with this question. Every help is appreciated.
Answer:
Change in KE = +1.96×10^4 J while the change in ME = 0 J
Please help I will mark you brainliest
I believe the answer is a
A phase change is when a substance changes from one state of mind to nother because of the adding or removal of thermal energy
True
False
Answer:
true it all changes
Explanation:
________________________
An object A with mass 200 kg and an another object B with mass 1000 kg are moving with same speed. The ratio of kinetic energy of object A to B is
Answer:
Ratio of kinetic energy of object A to B = 1:5
Explanation:
Given:
Mass of object A = 200 kg
Mass of object B = 1,000 kg
Find:
Ratio of kinetic energy of object A to B
Computation:
Kinetic energy = (1/2)(m)(v²)
Kinetic energy of object A = (1/2)(200)(v²)
Kinetic energy of object A = (100)(v²)
Kinetic energy of object B = (1/2)(1,000)(v²)
Kinetic energy of object B = (500)(v²)
Ratio of kinetic energy of object A to B = Kinetic energy of object A / Kinetic energy of object B
Ratio of kinetic energy of object A to B = (100)(v²) / (500)(v²)
Ratio of kinetic energy of object A to B = 100 / 500
Ratio of kinetic energy of object A to B = 1/5
Ratio of kinetic energy of object A to B = 1:5
NO LINKS PLEASE
At what speed do a bicycle and its rider, with a combined mass of 90 kg
k
g
, have the same momentum as a 1500 kg
k
g
car traveling at 4.0 m/s
m
/
s
?
Answer:
2
Explanation:
What is the approximate surface temperature of the 'White Dwarfs'?.
2,500-5,000 K
5,000-10,000
10,000-15,000 K
15,000 K-35,000 K
Answer:
5,000-10,000 K
Explanation:
make me your brainlist pls
What voltage would be measured across the 15 ohm resistor?
A)
2.5 volts
B)
5.0 volts
C)
7.5 volts
D)
10 volts
Answer:
7.5 volts
Explanation:
I did it on USA Testprep
why the speed of light decreases as it passes from air into another substance?
Answer:
If light enters any substance with a higher refractive index (such as from air into glass) it slows down. The light bends towards the normal line. If light travels enters into a substance with a lower refractive index (such as from water into air) it speeds up. The light bends away from the normal line.
Please help me someone !
Answer:
The object is moving at constant speed.
Explanation:
The spaces between the dots are equal.
The circuit has a 3 volt EMF and two ohm resistors. How much power in watts does this circuit draw? A) 4.5 , B) 24, C) 1.13 D) 2.67 E) 0.375 F) 1.5
Answer:
P = 4.5 watts
Explanation:
Given that,
EMF of the circuit, E = 3 volt
The resistance of the resistors, R = 2 ohms
We need to find the power of this circuit. The relation between power, emf and resistance is given by the formula as follows :
[tex]P=\dfrac{V^2}{R}[/tex]
Substitute all the values,
[tex]P=\dfrac{3^2}{2}\\\\P=4.5\ W[/tex]
So, the power of this circuit is equal to 4.5 watts.
Sometimes a person cannot clearly see objects close up or far away. To correct this type of vision, bifocals are often used. The top half of the lens is used to view distant objects and the bottom half of the lens is used to view objects close to the eye. Bifocal lenses are used to correct his vision. A diverging lens is used in the top part of the lens to allow the person to clearly see distant objects.
1. What power lens (in diopters) should be used in the top half of the lens to allow her to clearly see distant objects?
2. What power lens (in diopters) should be used in the bottom half of the lens to allow him to clearly see objects 25 cm away?
Answer:
1) P₁ = -2 D, 2) P₂ = 6 D
Explanation:
for this exercise in geometric optics let's use the equation of the constructor
[tex]\frac{1}{f} = \frac{1}{p} + \frac{1}{q}[/tex]
where f is the focal length, p and q are the distance to the object and the image, respectively
1) to see a distant object it must be at infinity (p = ∞)
[tex]\frac{1}{f_1} = \frac{1}{q}[/tex]
q = f₁
2) for an object located at p = 25 cm
[tex]\frac{1}{f_2} = \frac{1}{25} + \frac{1}{q}[/tex]
We can that in the two expressions we have the distance to the image, this is the distance where it can be seen clearly in general for a normal person is q = 50 cm
we substitute in the equations
1) f₁ = -50 cm
2)
[tex]\frac{1}{f_2} = \frac{1}{25} + \frac{1}{50}[/tex]
[tex]\frac{1}{f_2}[/tex] = 0.06
f₂ = 16.67 cm
the expression for the power of the lenses is
P = [tex]\frac{1}{f}[/tex]
where the focal length is in meters
1) P₁ = 1/0.50
P₁ = -2 D
2) P₂ = 1 /0.16667
P₂ = 6 D
A 20 ft ladder leans against a wall. The bottom of the ladder is 3 ft from the wall at time t=0 and slides away from the wall at a rate of 2ft/sec. Find the velocity of the top of the ladder at time t=1.
Answer: 0.516 ft/s
Explanation:
Given
Length of ladder L=20 ft
The speed at which the ladder moving away is v=2 ft/s
after 1 sec, the ladder is 5 ft away from the wall
So, the other end of the ladder is at
[tex]\Rightarrow y=\sqrt{20^2-5^2}=19.36\ ft[/tex]
Also, at any instant t
[tex]\Rightarrow l^2=x^2+y^2[/tex]
differentiate w.r.t.
[tex]\Rightarrow 0=2xv+2yv_y\\\\\Rightarrow v_y=-\dfrac{x}{y}\times v\\\\\Rightarrow v_y=-\dfrac{5}{19.36}\times 2=0.516\ ft/s[/tex]
one negative change you may encounter as a student or an employee
Answer:
you may get bullied or teased for being a differrent race, ethnic.
Answer:
Workload
Explanation:
You may feel stressed about a heavier workload or more too do. You will also be paid as an employee unlike, a student.
The photograph shows part of the Great Plains of North America. How do
plains form?
A. Magma rises at a divergent plate boundary.
B. Tectonic movements make folds and faults in the crust.
C. Continental plates slip past each other at a transform boundary.
D. Water, wind, or glaciers either remove or deposit crust.
SUBMIT
2 PREVIOUS
Answer:
Some plains form as ice and water erodes, or wears away, the dirt and rock on higher land. Water and ice carry the bits of dirt, rock, and other material, called sediment, down hillsides to be deposited elsewhere. As layer upon layer of this sediment is laid down, plains form. Volcanic activity can also form plains.
What is the order of the events for the water cycle on a typical warm day?
А
rain, snow, sleet
B
precipitation, evaporation, rain
с
evaporation, condensation, precipitation
D
condensation, evaporation, precipitation
the number of perpandicular components of a force is
Tameika makes a table about sensory organs
Eye
skin
brain
tongue
Which organ should be removed from the table?
A. eye
B. skin
C. brain
D. tongue
Answer:
I think its d
Explanation:
I'm not sure I'm sorry if I'm wrong
can someone help
pls !
What is the Lorentz force law used for? A. To find the voltage of a battery B. To find the magnitude of a magnetic force C. To find the velocity of an electromagnetic wave. D. To find the direction of a magnetic field
Answer:
B
Explanation:
The Lorentz force is the sum of the electric force and magnetic force.
F = qE + qvB
qE represents electric force and qvB represents magnetic force
A copper wire of resistivity 2.6 × 10-8 Ω m, has a cross sectional area of 35 × 10-4 cm2
. Calculate
the length of this wire required to make a 10 Ω coil.
Answer:
the length of the wire is 134.62 m.
Explanation:
Given;
resistivity of the copper wire, ρ = 2.6 x 10⁻⁸ Ωm
cross-sectional area of the wire, A = 35 x 10⁻⁴ cm² = ( 35 x 10⁻⁴) x 10⁻⁴ m²
resistance of the wire, R = 10Ω
The length of the wire is calculated as follows;
[tex]R = \frac{\rho L}{A} \\\\L = \frac{RA}{\rho} \\\\L= \frac{10 \times (35\times 10^{-4}) \times 10^{-4}}{2.6 \times 10^{-8}} \\\\L = 134.62 \ m[/tex]
Therefore, the length of the wire is 134.62 m.
Protons, neutrons, electrons, and a nucleus are
. Estimate the buoyant force that air exerts on you. (To do this, you can estimate your volume by knowing your weight and by assuming that your weight density is a bit less than that of water.)
Answer:
[tex]0.886[/tex] N buoyant force is exerted by air
Explanation:
My weight is [tex]75[/tex] Kg
Weight = mass * gravity
As we know
Buoyant Force is equal to the product of density * acceleration due to gravity and volume of the body
Assuming weight density is a bit less than that of water or equal to water i.e [tex]997.77[/tex] kg/m3
Volume is equal to mass / density
[tex]= 75[/tex] Kg * g/[tex]997.777[/tex]
[tex]= 0.0751[/tex] * g
Buoyant Force
= Volume * g * density
[tex]= 0.0751 * 9.8 * 1.2041[/tex]kg/m3
[tex]= 0.886[/tex] N
convert 1 day into seconds.(you will need to show your work to receive credit.) please help thank you
Answer:
the answer is 86400seconds.
Explanation:
1day= 24 hours
24hours to seconds =
24×60×60= 86400 seconds.
( 60 second = 1 minutes)
( 60 minutes = 1 hour)
Which one of the statements below is true about mechanical waves?
They must travel in empty space.
They can travel in a vacuum.
Both sound and light are examples of mechanical waves.
They require a medium to travel through.
Answer:
Both sound and waves
Explanation:
Thank me later
If a reflected ray is 55 degrees from the normal line, they what is the angle of the
incident ray from normal?
Answer:
xplanation:
Angle of reflection is measured between the incident ray and the angle which it makes with the normal at the point where incident ray strikes the mirror surface.
Further on reflection, it makes the same angle i.e. angle of reflection is equal to angle of reflection.
Hence, as angle of incidence is 55∘ angle of reflection too is 55∘ and the angle between the incident ray and the reflected ray is 55∘+55∘=110∘
A wave has a frequency of 67 Hz and a wavelength of 7.1 meters. What is the speed of this
wave?
Answer:
475.7 m/s
Explanation:
Given,
Frequency ( f ) = 67 Hz
Wavelength ( λ ) = 7.1 m
To find : Speed ( v ) = ?
Formula : -
v = f λ
v
= 67 x 7.1
= 475.7 m/s
Therefore,
the speed of the wave is 475.7 m/s.