Answer:
weathering
Explanation:
if you are talking about how rocks get into smaller pieces
What is the volume of 9.5 g fluorine gas, F2, at STP?
Answer:
5.6L
Explanation:
At STP, the pressure and temperature of an ideal gas is
P = 1 atm
T = 273.15k
Volume =?
Mass = 9.5g
From ideal gas equation,
PV = nRT
P = pressure
V = volume
n = number of moles
R = ideal gas constant =0.082J/mol.K
T = temperature of the ideal gas
Number of moles = mass / molar mass
Molar mass of F2 = 37.99g/mol
Number of moles = mass / molar mass
Number of moles = 9.5 / 37.99
Number of moles = 0.25moles
PV = nRT
V = nRT/ P
V = (0.25 × 0.082 × 273.15) / 1
V = 5.599L = 5.6L
The volume of the gas is 5.6L
Static electricity is the buildup of electric charges. Which of the following is an example of the natural discharge of static electricity?
A.
ocean waves
B.earth's magnetic poles
C. northern lights
D. lightning
Calculate the volume that 12.5 g of Co, gas will occupy at a
temperature of 40°C and a pressure of 1.20 atm.
The volume of the gas can be calculated using the ideal gas equation. The volume of 12.5 g Co gas at 40° C or 313 K and at 1.2 atm is 4.4 L.
What is ideal gas law?Ideal gas law is the combination of all the gaseous laws, relating the temperature, pressure, volume and number of moles of gas as written below:
PV = nRT
here, n is the number of moles and R be the universal gas constant equal to 0.082 L atm/ (K mol), T be the temperature in kelvin and p is the pressure in atm and finally v is the volume in L.
Given that the weight of Co is 12.5 g. Its atomic mass is 58.5. Thus number of moles of Co gas is 12.5/58.5 = 0.21 moles.
Now, apply the values of pressure, temperature and number of moles to the ideal gas equation as follows:
V = nRT/P
= (0.21 × 0.082 L atm/ (K mol) × 313 K ) /1.21 atm
= 4.49 L.
Therefore, the volume of 12.5 g Co gas at 313 K and at 1.2 atm is 4.49 L.
To find more on ideal gas law, refer here:
https://brainly.com/question/28257995
#SPJ2
Correct name of the compound
Answer:
Calcium Nitride
Explanation:
What happens to many synthetic elements after they are made
Answer:
dkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbofdigbjhdfibjgfdcibgifucbvjfcvibjgfjbtofijgbjidojbogfjojgifojgiojgfiobnfginjbiogdkfodsjgifodjgvdfojbgifdjbof
Describe how alleles and genes are related.
Answer:
A gene is a stretch of DNA or RNA that determines a certain trait. Genes mutate and can take two or more alternative forms; an allele is one of these forms of a gene. Chromosomes occur in pairs so organisms have two alleles for each gene one allele in each chromosome in the pair.
According to Reference Table Adv-8, which of the following is the strongest Brönsted-Lowry acid?
1.HS-
2.H2S
3.HNO2
4.HNO3
Answer:
HNO3
Explanation:
The ability of an acid to act as a Brownstead-Lowry acid depends on it's proton donation ability.
A Brownstead-Lowry acid is a specie that donates hydrogen ions in solution.
Considering all the chemical species listed among the options, HNO3 has the greatest hydrogen donation ability. It then follows that HNO3 is the strongest Brownstead-Lowry acid among the species listed.
In a nuclear reaction, which of the following must be conserved?
A. energy
B. mass
C. charge
D. the number of electrons
Answer:
A. Energy must be conserved in a nuclear reaction
Explanation:
Answer:
Explanation:
In a nuclear reaction, which of the following must be conserved?
A. Energy
help asap plzzz! Which of the following diagrams is the correct electron dot diagram for S?
Answer:
A.
Explanation:
Sulfur has 6 valence electrons, therefore has 6 dots.
- Hope that helps! Please let me know if you need further explanation.
The correct option is A.
What is a dot diagram?
A Lewis electron dot diagram (or electron dot diagram, or a Lewis diagram, or a Lewis structure) is a representation of the valence electrons of an atom that uses dots around the symbol of the element. The number of dots equals the number of valence electrons in the atom.
Why do we use electron dot diagrams?These diagrams are helpful because they allow us to show how atoms are connected, and when coupled with Valence Shell Electron Repulsion Theory (VSEPR), we can use Lewis structures to predict the shape of the molecule.
Learn more about dot diagrams here brainly.com/question/856013
#SPJ2
What is the wavelength of a light frequency 7.21x10^14Hz
Answer:
6.0 x 105
Explanation:
Answer:6.0 x l05
Explanation:
what is the shortest half life
Answer:
Hey!
Your answer is element A
Explanation:
Using the graph, the element A's emission of radioactive particles ends approximately after 6 years...
A HALF-LIFE IS "HALF" OF THAT TIME PERIOD!
So if the radiation goes for 6 years the half-life is 6 divided by two which gives you 3 years!
The rest however have a longer half-life...
Because they all end at 14 yrs so their half-life in 7 years!
HOPE THIS HELPS!!
When you hammer a nail, which types of energy are you using? Select all of the correct answers.
potential energy
physical energy
kinetic energy
mechanical energy
Answer:
U using kinetic energy
how does the Doppler effect related to the universal expanding?
Brandon is trying to remember how the physical and chemical properties of metals, nonmetals, and metalloids compare. He wrote some notes down, then looked in his textbook to see which notes were correct.
Which of Brandon's notes, listed below, are correct?
I. Metals are the best at conducting heat, and nonmetals are the worst.
II. Metals are the worst at conducting electricity, and nonmetals are the best.
III. The shape of nonmetals is easy to change, but the shape of metals or metalloids is difficult to change.
IV. Nonmetals are dull in appearance while metals are usually shiny.
V. Metals tend to have a high density, and nonmetals tend to have a low density.
Answer:
The correct ones are:
|
|||
|V
V
Explanation:
Answer:
1 for and 5
Ex
Study island
What are the oxidizing agent and the reducing agent in this chemical equation?
3Fe5 + 8HNO3 + 3FeSO4 + 8NO + 4H20
A) Fes is the oxidizing agent, and HNO3 is the reducing agent.
B) HNO3 is the oxidizing agent, and NO is the reducing agent.
C) Fes is the reducing agent, and HNO3 is the oxidizing agent.
D) HNO3 is the reducing agent, and NO is the oxidizing agent.
Answer:
C.
Fe goes from 0 to 2+, oxidation. It is reducing agent
N goes from 5+ to 2+, reduction. It is oxidizing agent
Explanation:
Oxidation number
Fe (s) has 0
FeSO4 has 2+
HNO3 N has 5+
NO N has 2+
ANSWER
C is the answer just trust me plz I GOOGLED it
#Google works # Big Brains
Explanation:
PLZ HELP OR WILL FAIL!!
Label A drop downs are: condensation, melting, sublimation
Label B drop downs are: condensation, melting, sublimation
Label C drop downs are: condensation, melting, sublimation
The process by which complex compounds are broken down by enzymes and by which many organic alcohols are formed is called
Answer:
fermentation
Explanation:
What happens when air moves from an area of high pressure to an area of low pressure?
A Clouds are formed
B Humidity rises.
C Rain falls.
D Wind is created.
Answer: The answer is D. wind is created. :)
Answer:
D
Explanation:
Please help I don’t understand
A solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral. Why?
Answer:
Because when you find the pH it comes out to be 7; 7 is neutral.
Explanation:
pH=-log(H3O+)
- Hope this helped! Please let me know if you need further explanation.
A solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral as on calculating pH, it comes out to be 7.
What is pH?pH, often known as acidity in chemistry, has historically stood for "potential of hydrogen" (as well as "power of hydrogen"). It refers to a scale used to describe how basic or how acidic an aqueous solution is. When compared to basic or alkaline solutions, acidic solutions—those with higher hydrogen (H+) ion concentrations—are measured with lower pH values.
Where [H+] represents the solution's equilibrium molar concentration of H+ (mol/L). Acidic solutions are those with a pH below 7, and basic solutions are those with a pH above 7, at a temperature of 25 °C (77 °F). At 25 °C, fluids with a pH value of 7 are neutral. A solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral as on calculating pH, it comes out to be 7.
pH = -log[H⁺]
= -log[1.00 x 10⁻⁷]
= 7
Therefore, a solution with a H+ concentration of 1.00 x 10-7 M is said to be neutral as on calculating pH, it comes out to be 7.
To know more about pH, here:
https://brainly.com/question/15289741
#SPJ2
Which two substances are among the six most abundant elements in living
things?
A. Helium
B. Calcium
C. Chlorine
D. Nitrogen
Answer:
nitrogen
Explanation:
Living organisms often contain trace amounts of several elements, but the most abundant ones are oxygen, carbon, hydrogen, nitrogen, calcium and phosphorus.
Oxygen. ...
Carbon. ...
Hydrogen. ...
Nitrogen. ...
Sulfur. ...
Phosphorus.
The Six most Abundant Elements that occur in Living Organisms.
OxygenCarbon. Hydrogen. Nitrogen. Sulfur.Phosphorus.So the correct answer is option D. Nitrogen.
What is the main use of nitrogen?Nitrogen is important for plant growth and can be 'fixed' by lightning or added to soils in fertilizers. A colourless, odourless gas. Nitrogen is important to the chemical industry. It is used to make fertilisers, nitric acid, nylon, dyes and explosives.
What can nitrogen do to your body?
It is used to make amino acids in our body which in turn make proteins. It is also needed to make nucleic acids, which form DNA and RNA. Humans or other species on earth require nitrogen in a 'fixed' reactive form.
Learn more about nitrogen here: https://brainly.com/question/15128980
#SPJ2
Of the following chemical properties , which one is not one that Covalent compounds DO NOT have ?
a
They share electrons between their elements.
b
They have weaker bonds.
c
They have relatviely higher melting and boiling points.
d
Many of these compounds are usallly liquids or gases at room temperature.
Answer:
D. They are usually liquids or gases at room temperature.
Explanation:
Covalent compounds have covalent bonds, meaning that they share electrons between elements and have relatively higher melting melting and boiling points due to the strength of their bonds. However covalent bonds are weaker than ionic bonds which is why B is correct. D is the only incorrect one because it is incorrect and contradicts point C. If a substance has a high melting/boiling point than it is much more likely to be solid at room temperature because of the high temperature it needs to pass in order to be a liquid or gas.
Hope this helped!
why is maple syrup more diluted than maple sap
What is the volume of solution (in mL) produced when 91.80g of Mg(OH)2 are used
to produce a 0.7M solution? Record your answer to 1 decimal places.
Answer: The volume of solution is 2248 ml
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute
[tex]V_s[/tex] = volume of solution in ml
moles of [tex]Mg(OH)_2[/tex] = [tex]\frac{\text {given mass}}{\text {Molar mass}}=\frac{91.80g}{58.32g/mol}=1.574mol[/tex]
Now put all the given values in the formula of molality, we get
[tex]0.7=\frac{1.574\times 1000}{V_s}[/tex]
[tex]V_s=\frac{1.574\times 1000}{0.7}=2248ml[/tex]
Therefore, the volume of solution is 2248 ml
Why did the United States government set aside land for the first national parks?
A.
They wanted to settle the west as quickly as possible.
B.
They worried people would destroy the animals and land.
C.
They worried Native Americans wouldn’t have anywhere to go.
D.
They wanted to make sure all citizens would get a piece of land.
Answer:
b
Explanation:
hope it helps
Water is an example of a
element j
ebhdfukfyerfkuq
Answer:
As known Water is an Example of an Element.
Scientific Method
PART A: Put the following steps of the scientific method in the correct order,
1 Data
2 Hypothesis
3. Conclusion
4. Problem
5. Variables
6. Research
7. Procedure
Answer:
Problem, Variables, Hypothesis, Research, Procedure, Data, Conclusion.
Explanation:
First, you have to know what the problem that you're talking about is. Then, you have to know the independent, dependent, and controlled variables are in order to make a hypothesis. Then do research about the topic. After that, you make the procedure your experiment, if that's what your doing. Then after the experiment, you find the data. Using that data, you make a conclusion.
Is the relationship between the amount of gas and pressure direct or indirect?
Explain your answer
Answer:
A law that states that at constant temperature, the volume of a fixed amount of a gas is inversely proportional to its pressure. A law that states that at constant temperature and pressure, the volume of a sample of gas is directly proportional to the number of moles of gas in the sample.
Explanation:
Who first discovered the phenomenon of radioactivity?
Answer:
Antoine Henri Becquerel
Explanation:
Though it was Henri Becquerel that discovered radioactivity, it was Marie Curie who coined the term. Using a device invented by her husband and his brother, that measured extremely low electrical currents, Curie was able to note that uranium electrified the air around it.
Boiling water is an example of what type of what type of thermal energy transfer?
convection
conduction
insulation
radiation
Answer:
Conduction
Hot water is conducting heat because it is moving
Boiling water is an example of conduction heat transfer (option B).
What is heat transfer?Heat is one of the various forms in which energy can exist. Heat transfers with or without medium from one place to another.
There are three ways in which heat is transferred in the environment;
ConductionConvectionRadiationConduction is the conveying of heat or electricity through a solid material such as the material used to boil water in this case. Therefore, option B is correct.
Learn more about conduction at: https://brainly.com/question/31201773
#SPJ6