Answer:
Hit the pot faster at a higher frequency
Explanation:
I feel like it would be because it makes more sense to me but I really have no clue tbh
6) Define Hydrogen bonds
A. A force created by differences in electronegativity and the small size of the hydrogen atom
make them especially strong.
B. A force created by similarities in electronegativity and the small size of the hydrogen atom
make them especially strong,
C. Forces created by temporary dipoles that result from the movement of electrons in non-
polar molecules.
D. A force created by differences in electronegativity and the large size of the hydrogen atom
make them especially strong,
E. The force between polar molecules when the opposite partial charges of a molecule exert a
force on each other
Answer:
A hydrogen bond is an intermolecular force (IMF) that forms a special type of dipole-dipole attraction when a hydrogen atom bonded to a strongly electronegative atom exists in the vicinity of another electronegative atom with a lone pair of electrons. Intermolecular forces (IMFs) occur between molecules. Other examples include ordinary dipole-dipole interactions and dispersion forces. Hydrogen bonds are are generally stronger than ordinary dipole-dipole and dispersion forces, but weaker than true covalent and ionic bonds.
Explanation:
This reaction type occurs when different atoms in two different compounds trade places.
A) synthesis
B) decomposition
C) double replacement
D) single replacement
Double replacement is the reaction that typically occurs when different atoms in two different compounds trade places (Option C).
What is double-replacement?Double-replacement is a class of chemical reaction where two atoms can exchange their places to generate new combinations.
This type of chemical reaction (double-replacement reaction) is very common in nature.In conclusion, double replacement is the reaction that typically occurs when different atoms in two different compounds trade places (Option C).
Learn more about double-replacement reaction here:
https://brainly.com/question/23918356
#SPJ2
What separates the inner planets from the outer planets in our solar system?
()Comet Belt
()Asteroid Belt
()Their differences
()Distance
Help plss!!
Answer:
the answer is B Astroid Belt
a metal worker uses a cutting torch that operates by reacting acetylene gas, C2H2(g), with oxygen gas, O2(g), as shown in the unbalanced equation below: C2H2(g)=O2(g)= CO2(g) = H2O(g) = heat determine the mass of 25 moles of acetylene (gram-formula mass = 26 g/mol
Answer:
650 grams
Explanation:
Given that acetylene gas reacts with oxygen to produce caobon dioxide, water and heat and the unbalnced equation is
[tex]C_2H_2(g)+O_2(g) \rightarrow CO_2(g) + H_2O(g)+ heat[/tex]
Gram-formula mass of [tex]C_2H_2= 26[/tex] g/mol
So, mass of 1 mole of acelylene is 26 grams
Therefore, mass of 25 moles of acelylene=25x26=650 grams
Hence, the mass of 25 moles of acelylene is 650 grams
The mass of 25 moles of acetylene has been 0.65 kg.
Moles are the count of a number of molecules in an entity and the mass based on the formula mass. 1 mole of a substance has [tex]\rm 6.023\;\times\;10^2^3[/tex] molecules.
The moles can be calculated as:
Moles = [tex]\rm \dfrac{weight}{molecular\;weight}[/tex]
Given, mole of acetylene = 25 mol
molecular mass of acetylene = 26 g/mol
Mass of acetylene = moles [tex]\times[/tex] molecular weight
Mass of acetylene = 25 [tex]\times[/tex] 26
Mass of acetylene = 650 grams
1000 grams = 1 kg
650 grams = 0.65 kg.
The mass of 25 moles of acetylene has been 0.65 kg.
For more information about the mass, refer to the link:
https://brainly.com/question/18838161
What element is in period 6 with 2 valence electrons?
Answer:
Barium
Explanation:
I think that's the answer
The element in period 6 with 2 valence electrons is Barium.
The periodic table has been organized into periods and groups. The period is in an horizontal arrangement while group is vertical arrangement. The elements that can be found in period 6 are Beryllium, Magnesium, Calcium, Strontium, Barium etc. Elements in the same group have the same number of valence electrons. This means that elements in group 2 have 2 valence electrons. Barium possess two valence electrons because it is in group 2 and it is also in period 6. Therefore, the element in period 6 with 2 valence electrons is Barium.Learn more at: https://brainly.com/question/24089206?referrer=searchResults
what happens if the temperature of a system at equilibrium is increased?
how many atoms are there in 8.08 moles of carbon dioxide
Answer:
145.97×10²³ atoms
Explanation:
Given data:
Number of moles of CO₂ = 8.08 mol
Number of atoms of CO₂ = ?
Solution:
1 mole of CO₂ contain 1 mole C atom.
8.08 mole contain 8.08× 1 = 8.08 mole of C atom.
1 mole of CO₂ contain 2 moles of O atom.
8.08mole contain 8.08×2 = 16.16 mole of O atom.
Total number of moles of atoms = 8.08 mole + 16.16 mole
Total number of moles of atoms = 24.24 mol
Number of atoms of CO₂:
1 mole of any substance contain 6.022×10²³ atoms.
24.24 mol ×6.022×10²³ atoms / 1 mol
145.97×10²³ atoms
What are the names of all of the valves in the
heart? Check all that apply
ventricular valve
aortic valve
atrium valve
carotid valve
mitral valve
pulmonary valve
tricuspid valve
Most of the elements on the Periodic Table are metals.
True
False
Answer:
the answer is true
Explanation:
I hope so it is helpful to u
How can magnetic force be exerted on objects?
1)Over a distance and anytime an object is in a magnet's field of influence.
2)Only through objects.
3)Only by touching an object.
Which is the largest measurement? *
grams
Milligrams
Kilograms
Centigrams
Answer:
KilogramsExplanation:
[tex]--------------------------------------------[/tex]
Microgram = 0.000001 Grams = Smallest Unit of Weight
1 ) Milligram = 0.001 Grams =
2 ) Centigram = 0.01 Grams
Decigram = 0.1 Grams
3 ) Gram = 1 Gram
Dekagram = 10 Grams
Hectogram = 100 Grams
4 ) Kilogram = 1000 Grams = Largest Unit of Weight = Answer
[tex]--------------------------------------------[/tex]
Hope this helps! <3
[tex]--------------------------------------------[/tex]
Kilograms are the largest unit among the options listed.
The metric system is a decimal-based system of measurement widely used around the world. It provides a standardized and convenient way to express measurements by utilizing prefixes that represent powers of 10.
In the metric system, the base unit for measuring mass is the gram (g). The gram is a relatively small unit, and to express larger or smaller masses, prefixes are added to the base unit. Here are some commonly used metric prefixes for mass.
The largest measurement among the options provided is kilograms (kg). Kilograms are larger units of measurement compared to grams (g), milligrams (mg), and centigrams (cg). The metric system follows a decimal-based system, where each unit is 10 times larger or smaller than the adjacent unit.
1 kilogram (kg) is equal to 1,000 grams (g), 1,000,000 milligrams (mg), and 10,000 centigrams (cg). Therefore, kilograms are the largest unit among the options listed.
Learn more about kilogram from the link given below.
https://brainly.com/question/29761698
#SPJ2
In 17.2 seconds, a shopping cart is pushed 15.6 meters towards the west. What is the velocity of the cart? (hint~The answer is NOT 3m/s)
Answer:
0.91m/s due west
Explanation:
Given parameters:
Time taken = 17.2s
Displacement = 15.6m
Unknown:
Velocity of the cart = ?
Solution:
Velocity of a body is the the displacement divided by the time taken.
Velocity = [tex]\frac{displacement}{time}[/tex]
Now insert the parameters and solve;
Velocity = [tex]\frac{15.6}{17.2}[/tex] = 0.91m/s due west
The __________________ is the process by which gases in the atmosphere absorb and reradiate heat.
Answer:
Greenhouse effect
Explanation:
Answer: water vapor, carbon dioxide and other gases absorb and reradiate thermal energy.
Explanation:
Which of the following is not a clue that a chemical reaction has taken place? *
4 points
A solid is formed when two clear solutions are mixed.
A clear solution is added to a red solution, and the result is a blue solution.
A solid is added to water and bubbles form.
A pure solid is heated and turns into a pure liquid.
Answer:
A pure solid is heated and turns into a pure liquid.
Explanation:
No colour change recorded, only change of state, hence this is a physical change - physical changes I.e. change of state and temperature are not chemical reactions.
Help!!!!!!!!!!!!!!!!!!
The density of the sample : 0.827 g/L
Further explanationIn general, the gas equation can be written
[tex]\large {\boxed {\bold {PV = nRT}}}[/tex]
where
P = pressure, atm , N/m²
V = volume, liter
n = number of moles
R = gas constant = 0.082 l.atm / mol K (P= atm, v= liter),or 8,314 J/mol K (P=Pa or N/m2, v= m³)
T = temperature, Kelvin
n= 1 mol
MW Neon = 20,1797 g/mol
mass of Neon :
[tex]\tt mass=mol\times MW\\\\mass=1\times 20,1797 =20.1797~g[/tex]
The density of the sample :
[tex]\tt \rho=\dfrac{m}{V}\\\\\rho=\dfrac{20,1797}{24.4}=0.827~g/L[/tex]
or We can use the ideal gas formula ta find density :
[tex]\tt \rho=\dfrac{P\times MW}{RT}\\\\\rho=\dfrac{1\times 20.1797}{0.082\times 298}\\\\\rho=0.826~g/L[/tex]
What Group would this element be in?
Answer:
Non-metals because it has 9 electrons meaning it is fluorine
Explanation:
How much oxygen (O) is in 5.41 × 106 atoms of oxygen
Answer:
They show you how to do it sweetie
Explanation:
123456789 Common math
Electric circuit are a pathway for ____ to flow
A.) Neutrons
B.) Protons
C.) Matter
D.) Electrons
Answer:
Electrons
Explanation:
The source that gives the voltage (force) causes the electrons to move.
Answer:
The answer is Electron
Explanation:
*WILL GIVE A BRAINIEST & 15 POINTS TO THE CORRECT ANSWER*
When an electron falls back to its original shell, the electron will...
A.) absorb energy as it goes to the excited state
B.) absorb energy as it goes to the ground state
C.) release energy as it goes to the excited state
D.) release energy as it goes to the ground state
Answer: D
Explanation:
Question 20 (1 point)
The chemical formula for glucose, a simple sugar, is CH1206. The formula for ethanol is CzH60. What
accounts for the differences in these compounds?
Answer:
A. The ratio of the element in glucose is different than in ethanol
Explanation:
The compounds given are;
Glucose C₆H₁₂O₆
Ethanol C₂H₆O
The two compounds given are different from one another. But they have the same elemental composition.
Ethanol is made up of Carbon, hydrogen and Oxygen and so also, Glucose
Now,
The number of atoms in both compounds are different;
Number of atoms
C H O
Glucose 6 12 6
Ethanol 2 6 1
If there are 400 radioactive atoms in a sample, how many will remain after four half-lives have passed?
Enter the exact number as your answer. Do not spell out the number.
Answer:
25 atoms
Explanation:
Given data:
Total number of atoms = 400 atom
Atoms remain after 4 half lives passed = ?
Solution:
At time zero = 400 atom
At first half life = 400 atom/2 = 200 atom
At 2nd half life = 200 atom/2 = 100 atom
At 3rd half life = 100 atom/2 = 50 atom
At 4th half life = 50 atom/2 = 25 atom
Thus, 25 atoms are remained after 4 half lives.
25 atoms of the radioactive atoms will remain after 4 half lives.
Given in the question,
Initial amount of a radioactive element = 400 atomsNumber of half lives = 4Expression for the amount remaining of a radioactive element after 'n' half lives is given by,
[tex]N=N_0(\frac{1}{2})^n[/tex]
Here, [tex]N_0=[/tex] Initial amount
[tex]n=[/tex] Number of half lives
By substituting the vales of [tex]N_0[/tex] and [tex]n[/tex] in the question,
[tex]N=400(\frac{1}{2})^4[/tex]
[tex]=\frac{400}{16}[/tex]
[tex]=25[/tex]
Therefore, 25 atoms of the radioactive atoms will remain after 4 half lives.
Learn more,
https://brainly.com/question/20159749
What are all the secrets to the universe ?
Where do elements in the human body tend to be located on the PERIODIC TABLE? (NOT PERCENTAGES PLEASE)
Answer:
Oxygen, Carbon, Hydrogern, Nitrogen, Sulfur, and Chlorine are all non-metals
Calcium, Potassium, Sodium, and Magnesium are all metals
Explanation:
The human body is made of elements at the most simple level. Oxygen in group 16, carbon in group 14, hydrogen located in group 1, and nitrogen and phosphorus in group 15.
What are the elements of the body?The body is composed of elements and atoms at the most preliminary level of organization. The elements are placed in a periodic table based on the atomic number that is characteristic of their properties. The elements are arranged into 18 families and groups.
oxygen is located in group 16, carbon in group 14hydrogen in group 1nitrogen in group 15calcium in group 2potassium in group 1sulfur in group 16sodium in group 1chlorine in group 17magnesium in group 2Therefore, elements are classified as alkali metals, alkaline metals, nonmetals, noble gases, halogens, and transition metals.
Learn more about elements, here:
https://brainly.com/question/13604973
#SPJ2
Think about how particles are arranged inside atoms. Please name and describe those three particles, and describe how the particles are arranged inside atoms. Some topics to include are: the charge of the particles, the mass of the particles, and where the particles are located.
In what way is Model A better than Model B? Model A shows the types of elements in the compound, but Model B does not. Model A shows the total number of atoms in the molecule, but Model B does not. Model A shows the three-dimensional shape of the molecule, but Model B does not. Model A shows the number of atoms of each element in the molecule, but Model B does no
Answer:the answer is c babes
Explanation:
I hope I could help y’all
Have a nice day
Or whatever day u want LMA0 it’s not up to me. Ight peace loves
Model A is better than Model B as Model A shows the three-dimensional shape of the molecule, but Model B does not. The correct option is c.
What are molecules?The smallest particle of a substance possesses all of its physical and chemical properties. One or more atoms make up a molecule.
Knowing the molecular weights of the molecules allows us to calculate their sizes. The molecular weight of a molecule is the sum of the atomic weights of the atoms in the molecule.
The relative atomic mass of particles determines their size. Particles with a higher relative atomic mass weigh more than particles with a lower relative atomic mass. Larger atoms have heavier iotas and a larger relative atomic mass.
Therefore, the correct option is c, Model A shows the three-dimensional shape of the molecule, but Model B does not.
To learn more about molecules, refer to the link:
https://brainly.com/question/28931982
#SPJ2
Which option listed above represents the correct way the layers would form? Explain
your choice by describing which chemical or physical property determines the
layering.
Answer:
option 1 pls mark bbrainliest
What is the difference between moles and mass?
The percent by mass is the ratio of the mass of each element to the total mass of the compound expressed as a percentage. Attached is the formula. What is the percent by mass of Oxygen in 10 grams of H20 given the mass by analysis of oxygen in that sample is 8 grams. (Answer should be given with a %. i.e. if the answer were 23% you answer in the textbox would be 23%)
Percent by mass = mass of solute mass of solution x 100
help me please:((
The percent by mass of Oxygen : 80%
Further explanationAccording to Proust: the mass percentage of the constituent elements of a compound is constant⇒compounds have a constant composition of elements
Given
mass of Oxygen (solute)= 8 grams
mass of H₂O(solution)=10 grams
Required
Percent by mass
Solution
[tex]\tt percent~by~mass=\dfrac{mass~oxygen}{mass~solution}\times 100\\\\percent~by~mass=\dfrac{8}{10}\times 100=80[/tex]
consider this equation S + 3O₂ → 3O₃ Is this equation balanced? why or why not?
Answer:
This equation is not balanced because you don't have the same amount of each element on each side of the chemical reaction. The balanced equation is:
2 S + 3 ⇒ 2
The law of conservation of matter states that since no atom can be created or destroyed in a chemical reaction, the number of atoms that are present in the reagents has to be equal to the number of atoms present in the products.
Then, you must balance the chemical equation. For that, you must first look at the subscripts next to each atom to find the number of atoms in the equation. If the same atom appears in more than one molecule, you must add its amounts.
The coefficients located in front of each molecule indicate the amount of each molecule for the reaction. This coefficient can be modified to balance the equation, just as you should never alter the subscripts.
By multiplying the coefficient mentioned by the subscript, you get the amount of each element present in the reaction.
Then, taking into account all of the above, you can determine the amount of elements on each side of the equation:
Left side: 1 sulfur S and 6 oxygen O (coefficient 3 multiplied by sub-index 2)
Right side: 1 sulfur S and 3 oxygen O (subindice value)
As you can see, you have the same amount of sulfur on both sides of the equation but the amount of oxygen is different. This indicates that the chemical equation is not balanced. To balance it, as the amount of sulfur is the same, the amount of oxygen must be balanced, which is different on each side of the reaction.
A simple way is to balance the equation is to multiply the product by 2, that is, add a coefficient 2 in front of the SO3 molecule, the reaction being as follows:
S + 3 ⇒ 2
Now the amount of elements on each side of the equation is:
Left side: 1 sulfur S and 6 oxygen O (coefficient 3 multiplied by subindice 2)
Right side: 2 sulfur S and 6 oxygen O (coefficient 2 multiplied by subindice 3)
The oxygen is now balanced, but the amount of sulfur on both sides of the reaction varies. To balance the quantities of sulfur, as now on the right side you have an amount of 2, you can add the coefficient to sulfur. The chemical equation is as follows:
2 S + 3 ⇒ 2
Now the amount of elements on each side of the equation is:
Left side: 2 sulfur S and 6 oxygen O (coefficient 3 multiplied by subindice 2)
Right side: 2 sulfur S and 6 oxygen O (coefficient 2 multiplied by subindice 3)
Finally you have the same amount of sulfur and oxygen on both sides of the reaction. So the chemical equation is finally balanced.
Explanation:
Brainliest please?
Answer:
it is balenced beacuse both sides have the same ammount of particals
Explanation:
Which liquid has the weakest intermolecular forces?
Answer:
Oil- Only London Dispersion Forces (the weakest intermolecular force)
Water- London Dispersion, Dipole-Dipole, and Hydrogen Bonding