Answer:
Assertion (A) is true
but reason (R) is false.
Explanation:
If we look at the assertion closely, it is true that a sublime substance changes from solid to gas without passing through a liquid state. Naphthalene, camphor, iodine and ammonium chloride are some common examples of the substances which undergo sublimation.
However, not all solids first pass through a liquid state before converting to gas. Sublime solids such as those listed above passes directly from solid to gas without passing through a liquid state.
Hence the assertion is true but reason is false.
What mass of potassium would need 2350 J of energy in order to raise its temperature from 44.3°C to 57.8°C? (cpotassium = 0.753 J/g°C)
Answer:
Explanation:
q = mCΔT
m =CΔT/q
ΔT = 57.8°C - 44.3°C = 13.5°C
m = (0.753*13.5)/2350
m = 0.00433 g
The mass of potassium that will need 2350 J of energy in order to raise its temperature from 44.3°C to 57.8°C is 231.17 g
Data obtained from the question Heat (Q) = 2350 JInitial temperature (T₁) = 44.3 °CFinal temperature of water (T₂) = 57.8 °CChange in temperature (ΔT) = 57.8 – 44.3 = 13.5 °C Specific heat capacity (C) = 0.753 J/gºC Mass (M) =?Q = MCΔT
2350 = M × 0.753 × 13.5
2350 = M × 10.1655
Divide both side by 10.1655
M = 2350 / 10.1655
M = 231.17 g
Learn more about heat transfer:
https://brainly.com/question/6363778
#SPJ2
H2O2 (yield) H2O + O2
If 650 grams of hydrogen peroxide is allowed to decompose, how much water and
oxygen will be created? If 255 grams of oxygen are collected, what is the percent
yield?
What is the concentration of a sodium hydroxide solution if 14.5 mL of it are exactly neutralized by 30.0 mL of a 0.500 M hydrochloric acid solution?
Answer:
1.03 M
Explanation:
Step 1: Write the balanced equation
NaOH + HCl ⇒ NaCl + H₂O
Step 2: Calculate the reacting moles of HCl
30.0 mL (0.0300 L) of 0.500 M HCl react.
0.0300 L × 0.500 mol/L = 0.0150 mol
Step 3: Calculate the moles of NaOH that react with 0.0150 moles of HCl
The molar ratio of NaOH to HCl is 1:1. The moles of NaOH that react are 1/1 × 0.0150 mol = 0.0150 mol.
Step 4: Calculate the molar concentration of NaOH
0.0150 moles of NaOH are in 14.5 mL (0.0145 L).
M = 0.0150 mol/0.0145 L = 1.03 M
I can't do Miscellaneous calculations!
E.g.
How many moles of oxygen atoms are present in 2.5 mole of water molecules?
The table below shows the speed of sound waves from musical sound sources at 20°C.
Which conclusion can be made based on the information in the table?
Wave speed and wave lengths can vary inversely to produce the same frequency.
Frequency and wave speed can vary directly to produce the same wavelength.
Wavelengths and frequency can vary inversely to produce the same wave speed.
Frequency and wave speed can vary directly to produce the same wave speed.
Answer:
C
Explanation:
Wavelengths and frequency can vary inversely to produce the same wave speed
Answer:
C) Wavelengths and frequency can vary inversely to produce the same wave speed.
Explanation:
edge
A radioisotope has a half-life of 5 minutes. What fraction of material would remain after
half an hour?
13 : 22
MI SEC
23. Which of the following solutions will reach dynamic equilibrium?
a Supersaturated solution
b Unsaturated solution
C Saturated solution
d None of the above
Answer:
C
Explanation:
The solution that will reach dynamic equilibrium is a saturated solution. The correct option is C.
What is an unsaturated solution?A chemical solution in which the solute concentration is less than its equilibrium solubility is known as an unsaturated solution.
The solvent dissolves the entire solute.
When a solute (typically a solid) is mixed with a solvent (commonly a liquid), two reactions take place at the same time.
Thus, the correct option is C, the saturated solution.
Learn more about saturated solutions.
https://brainly.com/question/1851822
Un átomo neutro tiene número atómico 1 y número másico 3. Indica cuántos protones, neutrones y electrones tiene.
Answer:
El átomo podes 1 protón, 1 electrón y 2 neutrones.
Explanation:
Cada elemento químico se caracteriza por el número de protones de su núcleo, que se denomina número atómico Z. Es decir, el número atómico de un elemento químico es el número total de protones que tiene cada átomo de ese elemento.
Los protones poseen carga positiva y se encuentran en el núcleo, en torno al cual se mueven otras partículas con carga eléctrica negativa que son los electrones. Así, el átomo es eléctricamente neutro, ya que la carga positiva de los protones está compensada por la carga negativa de los electrones. Entonces, en todo átomo neutro el número de protones del núcleo es igual al de electrones de sus orbitales.
En este caso, un átomo neutro tiene número atómico 1. Entonces la cantidad de protones y electrones presentes en el átomo es 1.
En el núcleo de cada elemento, además de protones, también es posible encontrar neutrones, cuyo número puede variar. La masa atómica (A) se obtiene sumando el número de protones y de neutrones de un núcleo determinado:
Número másico (A) = número de protones + número de neutrones
En este caso, el átomo neutro posee 1 protón y su número másico es 3. Entonces:
3= 1 + número de neutrones
Resolviendo:
3 - 1= número de neutrones
2= número de neutrones
Entonces, el átomo podes 1 protón, 1 electrón y 2 neutrones.
down there (pls hurry!!)
Is Ca +O2 ?-->CaO balanced ? explain why or why not
Which type of changes are melting, freezing, and boiling?
Answer:
the changes are physical changes
Calculate the molarity when 3.55 moles of NaCl are dissolved to make 0.200 L of solution
Answer: The molarity of given solution is 17.75 M.
Explanation:
Given: Moles = 3.55 mol
Volume of solution = 0.2 L
Molarity is the number of moles of a solute present in liter of solution.
Hence, molarity of the given solution is calculated as follows.
[tex]Molarity = \frac{no. of moles}{Volume (in L)}\\= \frac{3.55 mol}{0.2 L}\\= 17.75 M[/tex]
Thus, we can conclude that the molarity of given solution is 17.75 M.
Which shows an isomer of the molecule below?
Answer: C
Explanation:
Don’t trust the other person it’s not A
*view photo for answer*
pay attention! the answer choices aren't always in the same order!
An organ, such as the eye or the heart, is composed of cells and________.
A. tissues
B. water
How many moles of SO3 are in 2.4 *10^23 cules?
Answer:
0.4 molesExplanation:
To find the number of moles in a substance given it's number of entities we use the formula
[tex]n = \frac{N}{L} \\[/tex]
where n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
[tex]n = \frac{2.4 {10}^{23} }{6.02 \times {10}^{23} } = \frac{2.4}{6.02} \\ = 0.3986...[/tex]
We have the final answer as
0.4 molesHope this helps you
if you traveled 100 miles in 5 hours what is your speed
Answer:
20 MPH (miles per hour)
Explanation:
You do miles / time (miles divided by time) to calculate the average speed!
Hope this helped ^^
Calculate the hydrogen ion concentration of a Nitric acid solution with a pH of 2.11.
[H] = _____ (round to 2 decimal places)
Answer:
0.01 MExplanation:
The hydrogen ion concentration can be found by finding the antilog of the pH
[tex]pH = - log [ {H}^{+} ][/tex]
We have
[tex]2.11 = - log({H}^{+}) \\ find \: \: antilog \: of \: both \: \: sides \\ \\ |{H}^{+}| = {10 }^{ - 2.11} \\ = 0.00776...[/tex]
We have the final answer as
0.01 M to 2 decimal places
Hope this helps you
Need help. Will pay if needed, or give away points. CHEMISTRY
Answer:
C. So electrons can flow from one electrode to another
Explanation:
An electrochemical cell is any cell in which electricity is produced by reason of a chemical change.
An electrochemical cell consists of two electrodes, these two electrodes are connected using a wire.
Usually, electrons flow from one electrode to another via this wire thereby enabling the electrochemical processes of oxidation and reduction in the cell to proceed effectively.
Select all of the HOMOGENEOUS mixtures from this list (click all that apply).
A. Paint
B. Chili
C. Blood
D. Soil
E. Salt water
Answer:
E is answer
Explanation:
salt water is the answer
Answer:
E.Salt water
Explanation:
Salt water is a homogeneous because the dissolved salt is evenly distributed throughout the entire salt water sample. The amount of salt in the salt water can vary from one sample to another.
How would the number of atoms in a 2.02g sample of hydrogen compare to the number of atoms in a 32.00g sample of oxygen
Answer:
Number of atoms is equal.
Explanation:
1 mol of anything contains NA particles.
NA is known as Avogadro's number, 6.02×10²³
We determined the moles of each compound. Both molecules are dyatomic,
H₂ → 2.02 g . 1mol / 2.016 g = 1 mol
O₂ → 32 g . 1mol / 32g = 1 mol
Both have the same amount of moles.
In conclussion, the number of atoms is the same in both samples.
How many moles of O₂ are needed to react completely with 35.0 mol of FeCl₃?
4FeCl3+3O2->2Fe2O3+3Cl2
The 2 for the second half of the equation is not a coefficient it’s supposed to be for 2Fe2 Not 2O3.
26.3 mol
46.7 mol
23.3 mol
10.0 mol
Answer:
26.3 mol O₂
Explanation:
Step 1: Write the balanced equation
4 FeCl₃ + 3 O₂ ⇒ 2 Fe₂O₃ + 6 Cl₂
Step 2: Establish the appropriate molar ratio
According to the balanced equation, the molar ratio of FeCl₃ to O₂ is 4:3.
Step 3: Calculate how many moles of O₂ are needed to react completely with 35.0 mol of FeCl₃
We will use the previously established molar ratio.
35.0 mol FeCl₃ × 3 mol O₂/4 mol FeCl₃ = 26.3 mol O₂
A student carried out a titration using HC2H3O2(aq)HC2H3O2(aq) and NaOH(aq)NaOH(aq). The net ionic equation for the neutralization reaction that occurs during the titration is represented above. The NaOH(aq)NaOH(aq) was added from a buret to the HC2H3O2(aq)HC2H3O2(aq) in a flask. The equivalence point was reached when a total of 20.0mL20.0mL of NaOH(aq)NaOH(aq) had been added to the flask. How does the amount of HC2H3O2(aq)HC2H3O2(aq) in the flask after the addition of 5.0mL5.0mL of NaOH(aq)NaOH(aq) compare to the amount of HC2H3O2(aq)HC2H3O2(aq) in the flask after the addition of 1.0mL1.0mL of NaOH(aq)NaOH(aq), and what is the reason for this result
Answer:
The amount of HC₂H3₃2(aq) in the flask after the addition of 5.0mL of NaOH(aq) compared to the amount of HC₂H₃O₂(aq) in the flask after the addition of 1.0mL is much smaller because more HC₂H₃O₂(aq) is required to react with 5.0 mL NaOH than with 1.0 mL NaOH.
Explanation:
Equation of the reaction between acetic acid, HC₂H₃O₂(aq) and sodium hydroxide, NaOH(aq) is given below:
CH₃COOH (aq) + NaOH (aq) ----> CH₃COONa (aq) + H₂O
The equation of the reaction shows that acetic acid andsodium hydroxide will react in a 1:1 ratio
Since the concentration of NaOH was not given, we can assume that the concentration is 0.01 M
Moles of NaOH in 5.0 mL of 0.01 M NaOH = 0.01 × 5/1000 = 0.00005 moles
Moles of NaOH in 1.0 mL of 0.01 M NaOH = 0.01 ×1/1000 = 0.0001 moles
Ratio of moles of NaOH in 5.0 mL to 1.0 mL = 0.00005/0.00001 = 5
There are five times more moles of NaOH in 5.0 mL than in 1.0 mL and this means that 5 times more the quantity of HC₂H₃O2(aq) required to react with 1.0 mL NaoH is needed to react with 5.0 mL NaOH.
Therefore, the amount of HC₂H₃O2(aq) in the flask after the addition of 5.0mL of NaOH(aq) compared to the amount of HC₂H₃O₂(aq) in the flask after the addition of 1.0mL is much smaller because more HC₂H₃O₂(aq) is required to react with 5.0 mL NaOH than with 1.0 mL NaOH.
2. what is the factor in an experiment that a scientist wants to observe, which may change in response to
the manipulated variable; also known as a dependent variable
Which of the following is not a fossil fuel?
o copper
natural gas
O petroleum
O coal
Answer:
copper
Explanation:
coal, petroleum, and natural gas are all related to fossil fuels.
Copper is not a fossil fuel and the correct option is option 1.
What are fossil fuels?Fossil fuels are compound mixtures made of fossilized plant and animal remnants from millions of years ago. The creation of fossil fuels—either oil, natural gas, or coal—from these fossils is determined by the type of fossil, the amount of heat, and the amount of pressure.
Fossil fuels are a non-renewable source of energy. Most of the energy used by us is obtained by the burning of fossil fuels. These fossil fuels are used up at a faster rate. They cannot be regrown at a scale compared to their consumption.
Therefore, Copper is not a fossil fuel and the correct option is option 1.
Learn more about Fossil fuels, here:
https://brainly.com/question/3371055
#SPJ2
Need this asap!!!
Which type of substance gives off hydroxide ions when dissolved in water?
Acid
Base
Gas
Metal
Answer:
Acid
Explanation:
Can someone pls pls help me with these questions?!?!
Answer:
13) What common form of energy (not including kinetic or potential) is not included in the “Energy Symbols” key that would normally be present in these examples?
1) Sound Energy
2) Magnetic Energy
14)Look carefully at each of the four systems shown above. Knowing what we have discussed about energy conversions, identify (list) at least three different places where this form of energy (sound) should be “produced”.
1) When you open the water tap, in the turbine and the sound of the light bulb.
2) In the light bulb
3) The sound of the kettle, the turbine and when water is boiling.
4) The movement of the wheel of the bicycle, the turbine and the light bulb.
Which of the following processes is not an example of physical weathering?
A. acidification
B. abrasion
C. frost action
D. exfoliation
Answer:
acidification
Answer:
I think its A
Explanation:
Hope this helps: )
How many grams of copper (II) oxide will react with 10 liters of hydrogen gas?
Answer:
maybe 200g
I don't know thats just a guess
HOPE ITS TURE
Name the process by which oxygen moves from alveoli to blood
diffusion...........the blood through the capillaries lining the alveolar walls. Once in the bloodstream, oxygen gets picked up by the hemoglobin in red blood cells.
74g of Ca(OH)2 (74 g/mol) in 340 ml solution
Answer:
This question is asking to calculate the molarity of the solution based on the information provided.
The answer is 2.94M
Explanation:
Molarity of Ca(OH)2 solution = number of moles (n) ÷ volume (V)
Using the formula below to calculate number of moles of Ca(OH)2.
mole = mass/molar mass
Molar mass of Ca(OH)2 = 74 g/mol
mole = 74g/74g/mol
mole = 1mol
Volume of Ca(OH)2 solution = 340ml = 340/1000 = 0.340 L
Molarity = 1/0.340
Molarity = 2.94M