Answer:
The summary of the given question is summarized throughout the explanation segment below.
Explanation:
The goals of the HVAC system are as follows:
The greatest approach to enhance comfort in whatever commercial facility is simply to establish full management.To encourage extremely effective centralized air conditioning operations they must be connected.Comfort would be crucial for companies information about the moment of the year.Every government is working regarding cost reduction, therefore commercial HVAC systems may enable you to achieve such goals.Purpose of HVAC systems:
The atmosphere wherein it operates is controlled by someone with an HVAC system, the same maximum or minimum temperature of a space is controlled thru all the air conditioning.
1kW is equivalent to
Answer:
1000 watts
Explanation:
1kW= 1*1000W
8. In the commercial production of sugar (sucrose), the product crystals are washed and centrifuged to partial dryness. The crystals are then sent through a rotary dryer where they are contacted with a hot stream of air that reduces the moisture content from 1:0 wt% to 0:1 wt%. The ratio of wet sugar to inlet air fed to the dryer is 3.3 kg wet sugar/kg inlet air. The inlet air contains 1.5 mole% water. (a) Draw and label the flowchart and do the degree-of-freedom analysis. (b) Taking a basis of 100 kg of wet sugar fed to the dryer, calculate the mass of water and its mole fraction in the air leaving the dryer. (c) If 1000 tons/day of dried sugar is to be produced, at what rate (lbm/h) is water evaporated from the sugar
Does the music contribute to the performance of its production?
samilanoJoan ako to si neil binondo
paki answer po sa akin ate jeann o ate joan or kahit ano jan... pls pls
Answer:
Of course music plays crucial role
What is an example of a class 2 lever?
Answer:
A wheelbarrow, a bottle opener, and an oar are examples of second class levers
A wheelbarrow, a bottle opener, and an oar are examples of second class levers
How should you move your board through the planer? (Pick two choices.)
At an even pace
Slowly
Quickly
At an irregular pace
Answer:
I would say do it at an even pace
Explanation:
Doing it a slow pace takes time quickly will probably not to good gor you and doing it at an irregular pace is just way to fast
pls help
if a tin can can, can a tin can can?
Answer:
if a run can can if you can tin can can can?
Explanation:
so first we multiple of 3x3 is 9 so if we do 9x9 it gives us tin can
Answer:
Yes
Explanation:
If a tin can can can, then it can can
If you find yourself suddenly without headlights, slam on your brakes. A. TRUE B. FALSE
If you find yourself suddenly without headlights, slam on your brakes is the true statement.
What is done when there is no headlight?These actions should be taken if a headlight fails unexpectedly. Avoid abrupt stops, especially if there is traffic nearby. If there is no visibility, slow down and move into the slow shoulder at a very slow speed. To prevent striking anything, you ought to be moving slowly enough.
Thus, the statement is true.
For more details about when there is no headlight, click here:
https://brainly.com/question/3574754
#SPJ2
Which of the following is NOT an optional service? rustproofing
fabric protectants
keyless start
manufacturer's warranty
Answer:
Explanation:
Well I don't think this was always the case, but I think a warranty is mandatory. The other two look really optional to me.
Part B Now push the plate down and observe what happens on the shore. Repeat the action three to four more times, and watch the sand and the houses. Write down your observations.
cording to my experience,When the plate is pushed down, it simulates an earthquake or tremor. The resulting wave energy causes the sand on the shore to shift and move, possibly creating small landslides or avalanches. The houses may also shake or vibrate, and loose objects may fall or move.
After repeating the action three to four more times, the effect on the sand and houses may become more noticeable, with larger shifts and movements. The houses may show signs of structural damage or instability, such as cracks in the walls or foundation.
It is important to note that this is a simulation, and the actual effects of an earthquake or tremor would depend on many factors, such as the magnitude of the quake, the type of soil, and the proximity of the houses to the epicenter.
how are u today
Here's your points for helping me today
At what times should you use your headlights?
Answer:
Headlights are required to be used 1/2 hour after sunset to 1/2 hour before sunrise, when windshield wipers are being used, when visibility is less than 1000 feet, or when there is insufficient light or adverse weather.
Explanation:
hope this helps
Answer:
at night time from sunset all the way till sunrise
Explanation:
Which of the following identifies the main reason inventing the light bulb involved a long trial and error process?
The light bulb parts needed to be reliable.
The light bulb parts needed to be economical.
The light bulb parts needed to withstand heat.
The light bulb parts needed to withstand pressure.
Answer:
The light bulb needed to withstand heat
Answer:
The light bulb parts needed to withstand heat.(i know)
A person who uses different programming languages to develop a program is called?
Answer:
A computer programmer, sometimes called a software developer, a programmer or more recently a coder (especially in more informal contexts), is a person who creates computer software.
Aspectos de las técnicas escultóricas
Which of the following describes when the trial and error approach to problem solving is most successful?
when the problem has a single possible option
when the problem has a limited number of options
when the problem has an alternate solution method
when the problem has numerous possible options
Answer:
I think
when the problem has numerous possible options.
If wrong correct me pls
Have a great day
I hope it helps
[tex]#Liliflim[/tex]
Answer:
when the problem has numerous possible options(i think)
How does negative feedback influence the behavior of a system?
Answer:
Explanation:
A negative feedback influences the behavior of a system (i.e. a process) in the sense that control elements (controller) reverse the direction of the process by changing input conditions (action component) so that output can be set at a desired condition in order to fulfill safety, quality and cost-worthiness
Answer:
Negative feedback affects the behavior of a system in the sense that control elements reverse the process' direction by changing input conditions so that output can be set at a desired condition to meet safety, quality, and cost-worthiness requirements.
Explanation:
If this helps you please mark brainliest!
Have a nice day!
2.
The ideal body position for your legs after you've adjusted your seat is
with your knee
A. is fully tucked in when pressing the pedals
B. is slightly crooked when pressing the pedals
C. is fully extended when pressing the pedals
D. is pressing directly on the pedals
Answer:
B
Explanation:
I have a Dutch oven that looks like this what do I do?
Answer:
baking soda and vinegar dish soap
Explanation:
it will create a bubbles and let it sit for 3 hours and it will go away