How much gravitational potential energy does a 1.0 kg hammer have on a shelf 1.5 m above the ground?
Answer:
14.7 J
Explanation:
PE=MGH
PE= 1.0 x 9.8 x 1.5 = 14.7 J
A wire of resistance R is cut into ten equal parts which are then connected in parallel. The equivalent resistance of the combination is
Answer:
The equivalent resistance of the combination is R/100
Explanation:
Parallel Connection of Resistances
If resistances R1, R2, R3,...., Rn are connected in parallel, the equivalent resistance is calculated as follows:
[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R_1}+\frac{1}{R_2}+\frac{1}{R_3}+...+\frac{1}{R_n}[/tex]
The electric resistance of a wire is directly proportional to its length. If a wire of resistance R is cut into 10 equal parts, then each part has a resistance of R/10.
It's known the 10 parts or resistance R/10 were connected in parallel, thus the electric resistance is:
[tex]\displaystyle \frac{1}{R_e}=\frac{1}{R/10}+\frac{1}{R/10}+\frac{1}{R/10}+...+\frac{1}{R/10}[/tex]
Note the sum consists of 10 equal terms. Operating on each term:
[tex]\displaystyle \frac{1}{R_e}=\frac{10}{R}+\frac{10}{R}+\frac{10}{R}+...+\frac{10}{R}[/tex]
The sum of 10 identical fractions yields 10 times each fraction:
[tex]\displaystyle \frac{1}{R_e}=10\frac{10}{R}=\frac{100}{R}[/tex]
Solving for Re needs to take the reciprocal of both sides of the equation:
[tex]R_e=R/100[/tex]
The equivalent resistance of the combination is R/100
What does anaerobic mean?
A. Short bursts of energy
B. Without oxygen
C. Intense physical output
D. With oxygen
Answer:
without oxygen because
Answer:
Without oxygen
Explanation:
What element has conductivity,shiney luster,magnitic
-science
Answer:
The answer to this question is given below in this explanation section.
Explanation:
"What element has conductivity,shiney luster,magnetic
-science"
silicon has a shiny luster,But it is brittle and conducts electricity poorly.Some metalloids change their characteristics when they react with different elements.Luster conductivity and malleability are physical properties can be observed be observed without attempting to change the identity of the substance.The term physical property is an observable characteristics of a substance. in this case the luster conductivity and malleability of metals are the properties, which can be observed by our senses.It differs from chemical properties which can only be observed when the substance change its chemical identity.
Metal are solid at room temperature with the exception of mercury which is liquid at room temperature.Luster metal have the quality of reflection light from its surface and can be polished e.g gold,silver and copper.
In your own words explain how acceleration differs from uniform motion.
Explanation:
acceleration is the Changing of throut per unit time ....
and in uniform motion .....
in that the speed of an object is uniform means same
Which of the following formulas is the correct equation for the law of Universal gravitation?
Answer:
F = GMm / r²
from Newton's law of gravitational attraction
What is the Sl unit for momentum?
O kg• m
O kg
O kg• m
O kg
2
m
Explanation:
The S. I. unit of momentum is Kg. m/sechope it helps you
In an open circuit ____________.
Question 34 options:
a light bulb would produce light
current will flow
current will not flow
more than one resistor is in the circuit
a resistor controls the flow of current
Answer:
The current will not flow
Explanation:
An open circuit is a circuit that is not complete it has an opening Therfor the current can not flow.
Describe how elements are different from atoms
Answer:
An atom is the part of an element. A particular element is composed of only one type of atom. Atoms are further composed of subatomic particles called electrons, protons and neutrons. Elements can combine with each other to form molecules via chemical reaction.
Evelyn is making a model of Earth to show how the physical layers correspond to the compositional layers. Which of the following should Evelyn show in her model?
The physical layers exactly match the compositional layers.-A
The crust is the only compositional layer not included in the physical layers. -B
The physical layers of the inner core and outer core form a single compositional layer. -C
The physical layer of the asthenosphere includes the compositional layer of the crust.-D
on a test need it asap.
I'll report u if u don't give the answer and just want the points.
Answer:
B
Explanation:
A funnel shaped low pressure system that is typically associated with strong thunderstorms is a(n)_______. *
Answer:
Tornadoes
A tornado is a violently rotating column of air that is in contact with both the surface of the Earth and a cumulonimbus cloud or, in rare cases, the base of a cumulus cloudExplanation:
What causes the electrons to move in the “Electromagnetic Induction” animation?
a.
Current
c.
Changes in magnetic field
b.
Voltage
d.
Kinetic energy
Please select the best answer from the choices provided
A
B
C
D
Answer:
Change in the magnetic field
What is the main difference between speed and velocity?
Answer:
Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.
Answer:
Speed is the time rate at which an object is moving along a path, while velocity is the rate and direction of an object's movement.
Explanation:
Which observation supports a model of the nature of light in which light acts as a wave?
A. Constructive interference
B. Temperature change
C. Blackbody radiation
D. Photoelectric effect
Answer:
Explanation:
Hope this helps!
Answer:
a. constructive interference
Explanation:
100% correct
magnetic field strength decrease when what is increases
A 1000 kg car’s velocity increases from 5 m/s to 10 m/s. What is the change to the car’s kinetic energy? Show your work.
Answer:
k. e. = 1/2 mv^2
1/2 * 1000 * (5)^2
1/2 * 1000 * 25
12500 joules
k. e. = 1/2 mv^2
1/2 * 1000 * (10)^2
1/2 * 1000 * 100
50000
change in k. e. = final - initial
50000 - 12500
= 37500 joules
hope it helps you
Distinguishing between Speed and Velocity.
Answer:
Speed: Distance per time, 400 km/h, and a scalar quantity.
Velocity: Displacement per time, 20 m/s south, and a vector quantity.
Explanation:
Hope this helps! Please mark as brainliest.
Thanks!
identify the types of simple machine given below .
a)scissors b)axe c)driller
Answer:
there should some picture to identify right?
pls edit your question and insert the picture..
Answer:
Well it depends Because An axe Would be A Simple machine well as a drill is
why water molecules are closer together in the liquid state than in the solid state.
Answer:
because of the hydrogen bonds, as water molecules come together they stick to one another for a small, but significant amount of time. This slows them down, and holds them closer to one another. They become a liquid; a different state of matter where the molecules are closer and slower than in a gas.
Answer:
When water is in its solid-state, the water molecules are packed close together preventing it from changing shape.
Explanation:
In general, when considering the states of matter, solids are denser than liquids, and normally liquids are denser than gases.
Hope this helps!
Brain-List?
How can we find velocity?*
Answer: discplacement/change in time = average velocity.
Explanation:
There is a formula for velocity which is given above
Sam is moving house and is carrying a 300N box of books up a flight of steps 5m high, it takes her 30 seconds. Gary follows her carrying a bag of clothes doing 1000 J of work; it only takes him 25 seconds. Who provides the biggest power? Show your working.
Answer: Sam provides the biggest power
Explanation: Power is defined, in Physics, as the rate of work done. Work is energy transferred to an object due to the force causing the displacement of the object.
So, to determine Power:
For Sam:
P = [tex]\frac{work}{time}[/tex]
[tex]P=\frac{F.d}{t}[/tex]
[tex]P=\frac{300.5}{30}[/tex]
P = 50 Watts
The unit for Power is [P] = J/s = Watt
For Gary:
P = [tex]\frac{work}{time}[/tex]
[tex]P=\frac{1000}{25}[/tex]
P = 40 Watts
Comparing power of Sam and Gary, we can conclude that Sam provides the biggest power of 50 Watts.
Help me on question 5 pls I’m giving out brainlest!!
Question 1 of 11
What are two ways space exploration can improve international relations?
DA By urging countries to compete to achieve goals
DB. By helping countries' economies grow weaker
DC. By encouraging countries to share scientific data
DD. By inspiring countries to work together to solve problems
AnswerC and D
Explanation:
Answer: C & D
Explanation: Aplex
SI. unit of resistance ?
Answer:
si unit of resistance is Ohm
Write down the factors on which moment depends upon ?
Answer:
The size of a forceThe perpendicular distance from the pivot the line of action of forceExplanation:
Factors that affect the moment of a force are;
The size of a forceThe perpendicular distance from the pivot the line of action of forceThe magnitude of force applied is directly proportional to the moment of force in that for a perpendicular distance d, increased in force applied will result to a higher moment of force. When the perpendicular distance from the pivot is decreased while the force applied remains constant, the moment of force decreases.
Metamorphic rock occurs when you take any other type of rock and put them under ________ and ______________, and they twist and meld together.
Answer:
This question appear incomplete
Explanation:
This question appear incomplete because of the absence of options. However, metamorphic rocks are rocks that are formed from other pre-existing rocks under heat and pressure (both are usually high), causing them to twist and melt together. Metamorphism simply means a change in form of something and that's what happens here also.
Which statement accurately compares the trends in atomic number and atomic mass in the periodic table?
O The atomic number increases from left to right, while the atomic mass increases from right to left.
O The atomic mass increases from left to right, while the atomic number increases from right to left.
O Both the atomic mass and the atomic number increase from left to right.
O Both the atomic mass and the atomic number increase from right to left.
Answer:
C.
That is your answer
Given the impulse acting on an object and the impact time which equation can be used to calculate the force applied to an object
Answer is D
Ndmdjdndbdjdkskd
The impulse acting on an object and the impact time, the equation F= I / Δt can be used to calculate the force applied to an object, therefore the correct answer is D.
What is impulse?The product of the average applied force and the time for which it is exerted is known as an impulse.
the mathematical relation for impulse is
Impulse = F * Δt
where F represents the force applied and Δt represents the time for which the force is applied
Thus, the correct equation that can be used to calculate the force applied to an object is F = I /Δt and the correct option is D.
Learn more about impulse, here
https://brainly.com/question/16980676
#SPJ2
What is one of the forms of a gene called?
allele
dominant
heterozygous
recessive
Answer:
Explanation:
.
Answer:
alleles
my answee need to be at least 20 characters long :(
A 58 kg skier starts at rest from a 24.0 m high hill. They travel to the bottom and then up a second hill to a height of 19.0 m. How much kinetic energy do they have at the top of the second hill?
Answer:
10.791 kJ
Explanation:
Given that,
Mass of the skier, m = 58 kg
Initial position, h₁ = 24 m
Final position, h₂ = 19 m
We need to find the kinetic energy do they have at the top of the second hill.
Using the conservation of energy for both positions.
[tex]v_1=\sqrt{2gh_1} \\\\=\sqrt{2\times 9.8\times 24} \\\\=21.68\ m/s[/tex]
And
[tex]v_2=\sqrt{2gh_2} \\\\=\sqrt{2\times 9.8\times 19} \\\\=19.29\ m/s[/tex]
Kinetic energy :
[tex]K=\dfrac{1}{2}mv_2^2\\\\K=\dfrac{1}{2}\times 58\times 19.29^2\\\\=10791.01 J\\\\=10.791\ kJ[/tex]
So, the kinetic energy they have at the top of the second hill is 10.791 kJ.