The radius of the prop blade of an airplane is determined as 4.25 m.
Radius of the prop blade
The radius of the prop blade of an airplane is calculated as follows;
a = v²/r
where;
v is the linear speedr is the radius of the prop bladea is the centripetal accelerationr = v²/a
r = (875²)/(180,000)
r = 4.25 m
Thus, the radius of the prop blade of an airplane is determined as 4.25 m.
Learn more about centripetal acceleration here: https://brainly.com/question/79801
#SPJ1
A 1050 w electric toaster operates on a household circuit of 120 v. what is the resistance of the wire that makes up the heating element of the toaster
The Resistance of the wire that makes up the heating element of the toaster is 13.75Ω.
What is Resistance?
Resistance is the measure of the opposition to current flow in an electrical circuit.
S.I. Unit of resistance is ohms, symbolized by the Greek letter omega (Ω)
Also from Ohm's Law,[tex]R=\frac{V}{I}[/tex]
From power-current relation
P=VI
Also, [tex]I=\frac{P}{V}[/tex]
[tex]I = \frac{1050}{120}[/tex]
I = 8.75 A
From Ohm's Law,[tex]R=\frac{V}{I}[/tex]
[tex]R = \frac{120}{8.75}[/tex]
R = 13.75 Ω
The Resistance of the wire is 13.75 Ω
For more resistance questions visit
https://brainly.com/question/14547003
#SPJ1
Explain the difference between average speed and average velocity. The average acceleration is the difference between the average speed and the average velocity. Average speed is measured in kilometers per hour, whereas average velocity is measured in miles per hour. There is no difference between average speed and average velocity; they are completely equivalent terms. The average speed, a scalar, is greater than or equal to the magnitude of the average velocity vector over the same time interval. The average speed, a scalar, equals the magnitude of the average velocity vector over the same time interval.
The average speed, a scalar, is greater than or equal to the magnitude of the average velocity vector over the same time interval. Option C is correct.
What is average velocity?The average velocity is the ratio of the total distance traveled to the total time taken by the body. Its unit is m/sec.
A vector is a quantity or phenomena with magnitude and direction that are independent of one another. The phrase also refers to a quantity's mathematical or geometrical representation.
The distinction between average speed and average velocity is that the scalar average speed is larger than or equal to the magnitude of the vector average velocity during the same time frame.
Hence option C is correct.
To learn more about the average velocity refer to the link;
https://brainly.com/question/862972
#SPJ1
Calculate the velocity of an object.
moved around a circle with a radius of
1.65m and an acceleration of 3.5 rad /s²
Answer:
5.775 m/s
Explanation:
radial acceleration = velocity / radius
=> velocity = radial acceleration * radius
=> v = 3.5 * 1.65 = 5.775 (m/s)
Estimate how long a 2500 W electric kettle would take to boil away 1.5 Kg of water . The specific latent heat of vaporization of water is 4000000 J / Kg .
The time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds
How to calculate the timeUse the formula:
Power × time = mass × specific heat
Given mass = 1. 5kg
Specific latent heat of vaporization = 4000000 J/ Kg
Power = 2500 W
Substitute the values into the formula
Power × time = mass × specific heat
2500 × time = 1. 5 × 4000000
Make 'time' the subject
time = 1. 5 × 4000000 ÷ 2500 = 6000000 ÷ 2500 = 2400 seconds
Therefore, the time it would take a 2500 W electric kettle to boil away 1.5 Kg of water is 2400 seconds.
Learn more about specific latent heat of vaporization:
https://brainly.in/question/1580957
#SPJ1
a waddling armadillo of mass 500kg moves at 5 m/s. how much kinetic energy does it have?
Answer:
K=6.250 J
Explanation:
m=500kg
v=m/s
Kinetic energy= ½mv²=½(500×25) J= 6.250 J
BRAINLIEST + 19 pts what does a capacitor do in a circuit?
A. it reduces current.
B. It increases voltage
C. It stores and releases charge.
D. it overcomes resistance
answer: c
explanation: it's job is to store and release charge
Answer:
C- It stores and releases charge
5.
A device known as the nMRI, or nuclear magnetic resonance imager, often called an MRI for simplicity, is used for what purpose?
A to generate electricity
B to apply lasers to precision measurements of the nucleus
C to create an image of objects inside other objects
D to measure geologic pressures deep underground in volcanically active regions
Answer:
C. to apply lasers to precision measurements of the nucleus
Explanation:
Magnetic resonance imaging (MRI) is based on the principles of nuclear magnetic resonance (NMR), a spectroscopic technique used to obtain microscopic chemical and physical information about molecules.
At 6: 00 am, a motorbike set off from town A to town B at a speed of 40km/h. At the same time, a car set off from town B to town A at a speed of 60km/h. What time did they meet
Answer:
One would need to know how far apart the towns are:
T = SA / 40 time it takes for first cyclist to travel S1
T = SB / 60 time it takes for cyclist B to travel distance S2
SA + SB = S the distance between the towns
SB = 60 / 40 SA = 1.5 SA
SA + 1.5 SA = S
S = 2.5 SA where cyclist travels distance SA
The time will depend on the separation of the towns.
How far must a 2.0-cm-diameter piston be pushed down into one cylinder of a hydraulic lift to raise an 9-cm-diameter piston by 30 cm
The distance the 2.0-cm-diameter piston must be pushed down to raise 9 cm diameter is 607.5 cm.
Distance the piston must be pushed down
The distance the piston must be pushed down is calculated as follows;
A₁d₁ = A₂d₂
πr₁²d₁ = πr₂²d₂
r₁²d₁ = r₂²d₂
(1)²(d₁) = (4.5)²30
d₁ = 607.5 cm
Thus, the distance the 2.0-cm-diameter piston must be pushed down to raise 9 cm diameter is 607.5 cm.
Learn more about piston here: https://brainly.com/question/25870707
#SPJ1
if line segment g f = 3.2 ft, which is a possible measure of line segment t s? 1.6 ft 3.0 ft 3.2 ft 4.0 ft\
By applying the relationship of side lengths to interior angles in a triangle, a possible measure of line segment TS is 4.0 ft.
The relationship of sides to interior angles in a triangle.In Geometry, the relationship of side lengths to interior angles in a triangle include the following:
The shortest side length is always opposite of the smallest interior angle.The longest side length is always opposite of the largest interior angle.Based on the above theory, we can logically deduce that angle GF < TS or TS > GF because 42° is greater than 56°.
TS > 3.2 ft.
Therefore, a possible measure of line segment TS is 4.0 ft.
Read more on interior angle here: https://brainly.com/question/14379552
#SPJ1
Complete Question:
In the triangles, TR = GE and SR = FE. If Line segment G F = 3.2 ft, which is a possible measure of Line segment TS? 1.6 ft 3.0 ft 3.2 ft 4.0 ft.
Thanks for helping!!!------>
a 15.3 g bullet moving with a speed of 372 m/s. Answer in units of kg · m/s.
Answer:
56.916 kg m/s
Explanation:
Convert g to kg 15.3 g = .153 kg
.153 kg * 372 m/s = 56.916 kg*m/s
3) A photon is emitted as the electron in a hydrogen
atom drops from the n = 5 energy level directly to
the n = 3 energy level. What is the energy of the
emitted photon?
(1) 0.85 eV
(2) 0.97 eV
(3) 1.51 eV
(4) 2.05 eV
From the information provided and the calculations, the energy of the drop is 1.51 eV
What is the Rydberg formula?The Rydberg formula is used to obtain the energy of a photon or the wavelength of a photon.
Thus;
1/λ = 1.097 * 10^7 (1/3^2 - 1/5^2)
1/λ = 1.097 * 10^7(0.11 - 0.04)
λ = 1.3 * 10^-6 m
Since;
E = hc/λ
E = 6.6 * 10^-34 * 3 * 10^8/1.3 * 10^-6
E = 1.51 * 10^-19 J or 1.51 eV
Learn more about photon:https://brainly.com/question/20912241
#SPJ1
Answer:
0.97eV
Explanation:
The energy emitted during n=5 is 0.54 eV
The energy emitted during n=3 is 1.51 eV
(This information is on the Physics Reference Table 2006 edition)
We find the change in the energy level which is:
1.51eV-0.54eV = 0.97eV
Therefore the energy emitted by the photon is 0.97eV.
it is a routine composed of yells and cheers gymnastic skill and dance
Cheer dance is a routine composed of yells and cheers gymnastic skill and dance.
What is cheer dance?Cheer dance or cheerleading is a group activity used to entertain fans at athletic events and inspire louder, more enthusiastic cheering. It combines dancing and acrobatic aspects with shouted phrases.
A never-ending range of diverse stunts, jumps, pyramids, dances, and chants that integrate a variety of different movements can be included in the immensely complex sport of cheerleading. Base, partner, and spotter are the three primary cheerleading roles. These roles are all a part of cheerleading stunts, which pose the greatest risk of harm to participants.
It is a competitive sport and leisure activity made up of a set routine with necessary performance components, much like in gymnastics and dance. Additionally, it hopes to get the crowds to cheer in team sports event.
Learn more about cheer dance, refer the link:
https://brainly.com/question/29788167
#SPJ2
Your question is incomplete, but most probably your full question was:
1. It is a routine composed of yells and cheers, gymnastic skills and dance.
A. Contemporary dance
B. Hip-hop dance
C. Street dance
D. Cheer dance
Can you have curly hair even though your hair is short and soft? (Women)
PLease help with this this is pretty hard for me i kinda get it but not fully
Explanation:
Force = mass x acceleration
F= ma (formula)
15N = o.5kg x a
Divide both sides by o.5
a = 30 (greater acceleration)
15N = 4.5kg x a
Divide both sides by 4.5
a= 3.33 (great acceleration)
15N = 0.05kg x a
Divide both sides by 0.05
a = 300 (greatest acceleration)
What type of motion a particle has if its velocity-time graph is as mentioned below? i) Graph is parallel to the time axis ii)Graph is a straight line passing through the origin and having a constant slope.
The velocity time graph is used to plot the velocity of a body against the time.
What is the velocity time graph?The velocity time graph is used to plot the velocity of a body against the time. The slope of this graph is called the velocity.
Now the following are true regarding the scenarios below;
Graph is parallel to the time axis - This is constant velocity
Graph is a straight line passing through the origin and having a constant slope. - There is a uniform acceleration.
Learn more about velocity time graph:https://brainly.com/question/11290682
#SPJ1
An object whose mass is 0.092 kg is initially at rest and then attains a speed of 75.0 m/s in 0.028 s. What average net force acted on the object during this time interval?
Answer:
F = 246.4 N
Explanation:
Concepts:Newton's Laws Of MotionFirst Law: (Law of Inertia)
Inertia refers to the tendency of an object to resist any change in its state of motion. Inertia is a measure of the objects mass.Second Law:
refers to an object's motion when a net force does not equal zero. Acceleration is directly proportional to the net force and inversely proportional to the object's mass.Third Law: (Action - Reaction)
Whenever one object exerts a force on a second object, the second objects exert an equal but opposite force on the first.Weight:
Force of gravity is the weight of an object and is measured in Newtons.Friction:
Frictional forces always oppose motion. The frictional forces ([tex]F_f[/tex]) is proportional to the coefficient of friction (Ц) and to the normal force [tex](F_n) F_f=uF_n[/tex].The normal force is a contact force which acts perpendicular to the common surface of contact.Now onto the steps:
----------------------------------
F = mΔV ÷ t
F = 0.093 x 75 ÷ 0.028
F = 246.4 N
Therefore, the average net force acted on the object during this time interval is 246.6 Newtons.
What happens to the light in a
concave lens?
a. the light diverges when it passes
through the lens.
b. the light diverges before it enters the
lens.
c. the light converges when it enters the
lens.
Answer:
a. the light diverges when it passes through the lens.
Explanation:
All the light rays after passing through the concave lens diverge and when produced backwards appear to meet at a point on the principal axis of the lens. This point is known as principal focus of a concave lens.
a tape is weighed and found to weigh 1.95 lb. the overall length of the 100-ft tape (end to end) is 102.00 ft. the specific weight of steel is 490 lb/ft?. what is the cross-sectional area of the tape?
The cross-sectional area of the tape is determined as 3.9 x 10⁻⁵ ft².
Volume of the tape
The volume of the tape is calculated as follows;
volume = mass/density
volume = (1.95 lb)/(490 lb/ft³)
volume = 3.98 x 10⁻³ ft³
Area of the tapeV = AL
A = V/L
A = 3.98 x 10⁻³ ft³/102 ft
A = 3.9 x 10⁻⁵ ft²
Thus, the cross-sectional area of the tape is determined as 3.9 x 10⁻⁵ ft².
Learn more about area here: https://brainly.com/question/3948796
#SPJ1
According to the graph of displacement vs. time, what is the object's velocity at a displacement of 0.2 meters?
According to the graph of displacement vs. time, the object's velocity is 0.02 m/s
What is displacement?The displacement is the shortest distance travelled by the particle. It is the vector quantity which re[presents both the magnitude and direction.
Velocity is the time rate of change of displacement with time.
Given is the displacement 0.2 m and time taken is 10s. So, the velocity is
v = 0.2/10
v = 0.02 m/s
Thus, the object's velocity is 0.02 m/s
Learn more about displacement.
https://brainly.com/question/11934397
#SPJ1
What was the name of the first living being to be put into orbit?.
A 950-kg car strikes a huge spring at a speed of 22m/s (fig. 11-54), compressing the spring 5.0m. (a) what is the spring stiffness constant of the spring? (b) how long is the car in contact with the spring before it bounces off in the opposite direction?
(a) The spring stiffness constant of the spring is 18,392 N/m.
(b) The time the car was in contact with the spring before it bounces off in the opposite direction is 0.23 s.
Kinetic energy of the carThe kinetic energy of the car is calculated as follows;
K.E = ¹/₂mv²
K.E = ¹/₂ x 950 x 22²
K.E = 229,900 J
Stiffness constant of the springThe stiffness constant of the spring is calculated as follows;
K.E = U = ¹/₂kx²
k = 2U/x²
k = (2 x 229,900)/(5)²
k = 18,392 N/m
Force exerted on the springF = kx
F = 18,392 x 5
F = 91,960 N
Time of impactF = mv/t
t = mv/F
t = (950 x 22)/(91960)
t = 0.23 s
Learn more about spring constant here: https://brainly.com/question/1968517
#SPJ4
Why can we see the moon at
night?
a. the moon is luminous and produces its own
light.
b. light from the earth is reflected back to us off
of the moon.
c. light from the sun is reflected back to us off
the moon
d. light from the sun is absorbed by the moon.
Answer:
c. light from the sun is reflected back to us off the moon
Explanation:
the moon does not produce its own light
5. Calculate the volume of a cube with the following measurements.
Length= 5 cm
Height = 10 cm
Width = 16 cm
O 31 cubic cm
50 cubic cm
O 800 cubic cm
O400 cubic cm
Which form of energy is converted to electrical energy in a voltaic cell?.
Answer:
chemical energy is converted to electrical energy in a voltaic cell.
3. why is the sum of the maximum voltages across each element in a series r l c circuit usually greater than the maximum applied voltage? doesn't that inequality violate kirchhoff's loop rule?
The sum of the maximum voltages across each element in a series RLC circuit is usually greater than the maximum applied voltage because voltages are added by vector addition.
What is the Kichoff's loop rule?Kirchhoff's loop rule states that the algebraic sum of potential differences, as well as the voltage supplied by the voltage sources and resistances, in any loop must be equal to zero.
In a series RLCcircuit, the voltages are not added by scalar addition but by vector addition.
Kirchhoff's loop rule is not violated since the voltages across different elements in the circuit are not at their maximum values.
Therefore, the sum of the maximum voltages across each element in a series RLC circuit is usually greater than the maximum applied voltage because voltages are added by vector addition.
Learn more about Kichoff's loop rule at: https://brainly.in/question/35360816
#SPJ1
According to Newton's 2nd Law of Motion, if the mass of an object is 10 kg and the force is 10 newtons, then the acceleration is
10 m/s/s
10 m/s
100 m/s/s
1 m/s/s
According to Newton's second Law of motion, if the mass of an object is 10 kg and the force is 10 newtons, then the acceleration is 1m/s².
How to calculate acceleration?The acceleration of a moving body can be calculated by dividing the force of the body by its mass.
According to this question, the mass of an object is 10 kg and the force is 10 newtons, then the acceleration can be calculated as follows:
acceleration = 10N ÷ 10kg
acceleration = 1m/s²
Therefore, according to Newton's second Law of motion, if the mass of an object is 10 kg and the force is 10 newtons, then the acceleration is 1m/s².
Learn more about acceleration at: https://brainly.com/question/12550364
#SPJ1
If a lever has an input arm of 80 cm and an output arm of 20 cm, what is its ideal mechanical advantage?
Answer:
16
Explanation:
Who collected the evidence to prove what quasars are?
*
1 point
Inh Jee
Fred Hoyle
Albert Einstein
Maarten Schmidt
Answer:
I believe the answer is Maarteb Schmidt as he's the one who discovered quasars.
Which quantity is a vector quantity?
A.
displacement
B.
distance
C.
mass
D.
temperature
E.
volume
Answer:
Displacement...
Explanation:
Displacement is a vector quantity as it have both magnitude and direction...
[tex]...[/tex]
a. displacement is the correct answer
Displacement is a vector quantity
EXPLANATIONDisplacement is a vector quantity because it has both magnitude and direction.