Answer:
34kg
Explanation:
Genes consist portions of _____.
The table below shows the speed of sound waves from musical sound sources at 20°C. Which conclusion can be made based on the information in the table? Wave speed and wavelengths can vary inversely to produce the same frequency. Frequency and wave speed can vary directly to produce the same wavelength. Wavelengths and frequency can vary inversely to produce the same wave speed. Frequency and wavelengths can vary directly to produce the same wave speed. Mark this and return
Answer:
c
Explanation:
Answer:
C
Explanation:
Took it on edg
The elements neon and argon are not reactive
Un tanque de 50 litros tiene un gas a CNPT. ¿Cuánto valdrá la presión si la temperatura aumenta 40 °C, y el volumen permanece constante?
Answer:
La presion a 40 °C es 1.05 atm.
Explanation:
Usando la ecuación ideal de los gases.
[tex]PV=nRT[/tex]
Debemos recordar, que CNPT significa condiciones normales de presión y temperatura.
Para el primer estado tenemos:
[tex]P_{1}V_{1}=nRT_{1}[/tex]
Donde:
P(1) es la presion en el estado incial (1 atm)V(1) es el volumen incial (50 L)T(1) es la temperatura incial (25 °C = 298 K)Para el segundo estado:
[tex]P_{2}V_{2}=nRT_{2}[/tex]
Donde:
P(2) es la presion en el estado final ( x atm)V(2) es el volumen final (50 L)T(2) es la temperatura final (40 °C = 313 K)Como ambas ecuaciones tienen el mismo valor de volumen podemos igualarlas:
[tex]\frac{nRT_{1}}{P_{1}}=\frac{nRT_{2}}{P_{2}}[/tex]
n y R permanecen constantes, se puden cancelar.
[tex]\frac{T_{1}}{P_{1}}=\frac{T_{2}}{P_{2}}[/tex]
Despejamos P(2).
[tex]P_{2}=\frac{P_{1}T_{2}}{T_{1}}[/tex]
[tex]P_{2}=\frac{1*313}{298}[/tex]
[tex]P_{2}=1.05\: atm[/tex]
Espero te haya sido de ayuda!
A sled drops 50 meters in height on a hill. The mass of the rider and sled is 70 kg and the sled is going 10 m/s at the bottom of the hill. What is the efficiency of energy conversion from potential to kinetic?
Answer:
Efficiency = 10.2 %
Explanation:
Given the following data;
Mass = 70 kg
Height = 50 m
Velocity = 10 m/s
We know that acceleration due to gravity is equal to 9.8 m/s².
To find the efficiency of energy conversion from potential to kinetic;
First of all, we would determine the potential energy;
P.E = mgh
P.E = 70 * 9.8 * 50
P.E = 34300 J
For the kinetic energy;
K.E = ½mv²
K.E = ½ * 70 * 10²
K.E = 35 * 100
K.E = 3500
Therefore, Input energy, I = 34300 J
Output energy, O = 3500 J
Next, we find the efficiency;
Efficiency = O/I * 100
Substituting into the formula, we have;
Efficiency = 3500/34300 * 100
Efficiency = 0.1020 * 100
Efficiency = 10.2 %
A 100kg linebacker runs with a velocity of 5m/s towards an 88kg quarterback, who begins to back up
with a velocity of 2m/s to avoid being sacked
a.What is the momentum of the linebacker-quarterback system?
b.the quarterback is unsuccessful in evading the linebacker and gets sacked. what is the velocity of the football players just after the linebacker dives in for a tackle if the 2 players move as one clump?
I am pushing on a large box with 200N of force. Clint is pushing on the box with 200N of force in the opposite direction. Why won't the box move?
An element in a similar period to carbon would be
A chlorine
B. hydrogen
C. fluorine
D. magnesium
Answer: C: Fluorine
Explanation:
Carbon is in period two on the periodic table of elements. The only other elements in this period are lithium, borilliym, boron, nitrogen, oxygen, flourine, and neon. Therefore, the answer must be C.
Find the equivalent resistance of this
circuit.
Ri
R2
1002
2002
R3
600 12
Answer:
63016
Explanation:
Ri+R2+R3 this is called series circuit
Answer:
200
Explanation:
100+200=300
1/300+1/600=200
What is the potential difference across a circuit that delivers 4.2A to a 500W motor?
Answer:
Thus, the potential difference is 119 V.
Explanation:
Current, I = 4.2 A
Power, P = 500 W
The rate of doing work is called power.
The SI unit of power is Watt.
The commercial unit of power is horse power.
1 horse power = 746 Watt
The formula of the electrical power is
P = V I
where, V is the voltage and I is the current.
Substitute the values in the formula
500 = 4.2 x V
V = 119 V
How does a parallel circuit change when a branch is added?
The total resistance increases, so the current in the circuit decreases.
The total resistance decreases, so the current in the circuit increases.
The total resistance increases, so bulbs shine at a lower brightness.
The total resistance decreases, so bulbs shine at a higher brightne
A baseball player hits a 140 g baseball with a force of 2800 N. What is the
acceleration of the ball as it leaves the bat?
A. 0.050 m/s2
B. 20 m/s2
C. 390 m/s2
D. 20,000 m/s2
a car has a mass of 200kg. It is on a hill 1000m high. How much gravitational potential energy does the car have?
Answer:
Explanation:
PE = m * g * h
m = 200 kg
h = 1000 m
g = 9.81
PE = 200 * 9.81 * 1000
PE = 1962000 Joules
The equation below is used to calculate the mechanical advantage of an ideal wheel and axle.
mechanical advantage =
wheel radius
__________
axle radius
A student compares two wheel-and-axle simple machines. Machine 1 has a wheel radius of 50 centimeters, and an axle radius of 10 centimeters. Machine 2 has a wheel radius of 100 centimeters, and an axle radius of 10 centimeters. What is true of these simple machines’ mechanical advantage?
A.
Machine 1’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 2.
B.
Machine 1’s mechanical advantage is greater, which means that this machine can move faster than Machine 2.
C.
Machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
D.
Machine 2’s mechanical advantage is greater, which means that this machine can move faster than Machine 1.
Answer:
b
Explanation:
Machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
Mechanical advantageThe term mechanical advantage is the ratio of the radius of wheel to the radius of the axle for a wheel and axle system.
The true statement about the two machines that were compared; 1 and 2 is that, machine 2’s mechanical advantage is greater, which means that this machine can do more work with less force than Machine 1.
Learn more about mechanical advantage:https://brainly.com/question/16617083
#SPJ2
A 1.25 m long pendulum on Mars
has a period of 3.65 s. What is the
acceleration of gravity g on Mars?
(Unit = m/s^2)
Help please
Explanation:
[tex]period = 2\pi \sqrt{ \frac{length}{g} } [/tex]
[tex]3.65 \: s = 2\pi \sqrt{ \frac{(1.25 \: m)}{g} } [/tex]
Squaring both sides and solving for g, we get
g = 3.70 m/s^2
which is close to what is expected (3.71 m/s^2).
ASAP!!!!!! I need help is my final
Answer:
bro the answer would be 15m/s north
Explanation:
;)
Calculate the distance between a 3.0 x 10^-5 charge and a 2.0 x 10^-6 2 points
C charge if the force between them is 1000 N.
Answer:
thanks for answer:)
Explanation:
Question 4
The diagram represents the motion of a sound wave. The distance between points A and C is 9 meters (m), and it initially takes the wave 3 seconds (s) to travel.
What will be the wavelength of the sound wave if the velocity of the wave remains constant but the pitch is tripled?
A 3 meters
B 6 meters
с 9 meters
D 18 meters
Answer:A
Explanation:
The wavelength of the sound wave will be 3 meters.
What is wavelength?
The wavelength of any wave is defined as the distance between two max adjacent amplitudes, or the distance between two successive troughs or crest.
Now it is given that:
Distance =9 meters
time = 3 seconds
pitch=1/3 seconds
The velocity of the sound will be
[tex]V=\dfrac{d}{t}=\dfrac{9}{3}=3\ \frac{m}{s}[/tex]
Now from the question the wavelength of the sound wave if the velocity of the wave remains constant but the pitch is tripled
so [tex]f=3\times \dfrac{1}{3}=1 herts[/tex]
Now the velocity of the sound will be
[tex]v=f\times \lambda[/tex]
[tex]\lambda=\dfrac{v}{f}=\dfrac{3}{1}=3\ m[/tex]
Thus the wavelength of the sound wave will be 3 meters.
To know more about wavelength, follow
https://brainly.com/question/10728818
What is the wavelength?
How come we can see orange? In simple words.
Answer:
When sunlight shines through an orange solution, the violet, blue and green wavelengths are absorbed. The other colors pass through.
a crane lifts a 450kg concrete to the top of a 50m building in 5s.assuming g=10m/s²,calculate a,the potential energy if the concrete
Answer:
The answer is 225,000Joules
What’s the name of the muscle indicated on the image below?
1.Tricep
2.Oblique
3.Quadricep
4.Trapezius
Answer:
Oblique
Explanation:
I think that's the answer I was told this but forgot if this is the right answer if not then sorry
please help I found this confusing
Answer:
A
Explanation:
brainliest
Answer: A
Explanation:
In the diagram, R1 = 40.0 ohm, R2 = 25.4 ohm, and R3 = 70.8 ohm. What is the equivalent resistance of the group?
The resistors [tex]R_1 and R_2 [/tex]are in series connection, so the equivalent resistance of [tex]R_1 and R_2[/tex] will be their sum.
[tex] \boxed{ \mathrm{R_t = R_1 + R_2}}[/tex]
[tex]R_t= 40 + 25.4[/tex][tex]R_t= 65.4 \: \: ohms[/tex]Now, the equivalent resistance of [tex](R_1 and R_2)[/tex] and [tex]R_3 [/tex] is the total resistance of the circuit, and since they are in parallel connection, Total resistance :
[tex] \mathrm{ \dfrac{1}{ R_{eq}}} = \dfrac{1}{65.4} + \dfrac{1}{70.8} [/tex][tex] \dfrac{1}{R_{eq}} = \dfrac{65.4 + 70.8}{4630.32} [/tex][tex] \frac{1}{R_{eq}} = \dfrac{136.2}{4630.32} [/tex][tex]R_{eq} = \dfrac{4630.32}{136.2} [/tex][tex]R_{eq} = 33.996 \: \: ohms[/tex][tex] \boxed{ \mathrm{R_{eq} = 34 \: ohms}} \: (approx)[/tex]_____________________________
[tex]\mathrm{ \#TeeNForeveR}[/tex]
Find the height of a cylinder with a volume of 220inand a radius of 3 inches. Round
your answer to the nearest hundredth.
07.78 inches
6.93 inches
5.00 inches
9.84 inches
[tex]\huge{ \mathcal{ \underline{ Answer} \: \: ✓ }}[/tex]
Given :
volume = 220 in³radius = 3 inSolution :
[tex] \large\boxed{ \mathrm{volume = \pi {r}^{2}h }}[/tex]
[tex]220 = \dfrac{22}{7} \times 3 \times 3 \times h[/tex][tex] \dfrac{220 \times 7}{22 \times 3 \times 3} = h[/tex][tex] \dfrac{10 \times 7}{3 \times 3} = h[/tex][tex]h = \dfrac{70}{9} [/tex][tex] \boxed{h \: = 7.78 \: \: in}[/tex]_____________________________
[tex]\mathrm{ \#TeeNForeveR}[/tex]
Answer:
0.078 inches
Explanation:
The volume of a cylinder is [tex]V=\pi r^{2} h[/tex]. [tex]r[/tex] is the radius of the cylinder, [tex]h[/tex] is the height of the cylinder, and [tex]V[/tex] is the total volume.We can divide both sides by [tex]9\pi[/tex] to isolate the height. We now have [tex]\frac{220}{9\pi }=h[/tex].We can plug in [tex]220[/tex] for the value of [tex]V[/tex], and insert 3 as [tex]r[/tex]. Now, we have [tex]220 = \pi (3^2)(h)[/tex].We can simplify the right side by finding the value of [tex]3^2[/tex], which is [tex]3*3[/tex], or [tex]9[/tex]. We now have [tex]220 = 9\pi h[/tex].Divide both sides by [tex]9\pi[/tex] so we can isolate the height! We now have [tex]\frac{220}{9\pi }=h[/tex].It would be best to use a calculator at this point. Plug the above equation into a calculator; otherwise, replace [tex]\pi[/tex] with [tex]3.14[/tex] and simplify the fraction. You should get about [tex]07.7809...[/tex] which we can round to the nearest hundredths (since this is Geometry, I am assuming you know how to round).Our final answer is [tex]07.78[/tex] inches.Hopefully this was of use!
Why does it take more force to move a heavy box up a ramp than to move the same box down the ramp?
A.There is more friction on the bottom of the box when going up a ramp.
B.Gravity is pushing the box up the ramp at the same time you are pushing the box up the ramp.
C.When you push an object up a ramp, you are working against atmospheric pressure, which is pushing down.
D.When you push an object up a ramp, you are working against gravity, which pulls the box downward.
Transverse and longitudinal waves both have what?
Answer:
Following features are similar in longitudinal and transverse waves: Both waves are mechanical waves. Both transport energy without transporting matter. Particles oscillate about their mean position in both waves.
Se dea caer una pelota de basquetbol desde una altura de 90 metros.Calcular: El tiempo en que demorara en caer y a velcidad con la que llega al suelo
Answer:
1. t = 4.24 s
2. [tex]v_{f} = 42.43 m/s [/tex]
Explanation:
Podemos encontrar el tiempo de caída con la siguiente ecuación:
[tex] v_{f} = v_{0} + gt [/tex] (1)
En donde:
[tex] v_{f}[/tex]: es la velocidad final de la pelota
[tex] v_{0}[/tex]: es la velocidad inicial = 0 (se deja caer)
g: es la aceleración debida a la gravedad = 10 m/s²
Debemos hallar primero la velocidad final. Podemos usar la ecuación:
[tex] v_{f}^{2} = v_{0}^{2} + 2gh [/tex] (2)
En donde:
h: es la altura = 90 m
[tex] v_{f} = \sqrt{2gh} = \sqrt{2*10 m/s^{2}*90 m} = 42.43 m/s [/tex]
Entonces, la velocidad con la que la pelota llega al suelo es 42.43 m/s.
Ahora podemos encontar el tiempo que tarda en caer la pelota resolviendo la ecuación (1) para "t":
[tex] t = \frac{v_{f}}{g} = \frac{42.43 m/s}{10 m/s^{2}} = 4.24 s [/tex]
Por lo tanto, la pelota tarda 4.24 segundos en caer.
Espero que te sea de utilidad!
Help me please!
What is the velocity of a 0.1 kg baseball whose momentum is 100?
Answer:
1000m/s
Explanation:
velocity(v)=momentum(p)/mass
=100/.1
=1000m/s
Why is diffraction used in soil profiles?
Answer:X-ray diffraction (XRD) is the technique most heavily relied on in soil mineralogical analysis. X-ray diffraction is a technique that provides detailed information about the atomic structure of crystalline substances. It is a powerful tool in the identification of minerals in rocks and soils.
Explanation:
XRD is used to identify the minerals composing clay-rich, hydrothermally altered rocks that occur on several Cascade volcanoes. Such rocks are believed to play an important role in the generation of large landslides and mudflows. XRD is used to analyze saline minerals, including borates.