Segment D - E : The bus is speed_____ It is gradually increasing it's

A slowing down
B speeding up
C constant speed
D at rest

Plss help

Answers

Answer 1
B.) Speeding up......

Related Questions

A 4kg object is moving at 5 m/s . A 10-N force is applied in the direction of motion and if the object has a final velocity 10m /s. calculate the distance that the object moves

Answers

Answer:

Distance, S = 15m

Explanation:

Given the following data;

Mass = 4kg

Force = 10N

Initial velocity = 5m/s

Final velocity = 10m/s

To find the distance;

First of all, we would calculate the acceleration

Force = mass * acceleration

10 = 4*acceleration

Acceleration = 10/4

Acceleration = 2.5m/s²

Now to find the distance, we would use the third equation of motion.

[tex] V^{2} = U^{2} + 2aS [/tex]

Where;

V represents the final velocity measured in meter per seconds. U represents the initial velocity measured in meter per seconds. a represents acceleration measured in meters per seconds square.

S represents the displacement measured in meters.

Substituting into the equation, we have;

10² = 5² + 2*2.5*S

100 = 25 + 5S

5S = 100 - 25

5S = 75

Distance, S = 75/5

Distance, S = 15m

TRUE OR FALSE
1. TRUE OR FALSE: The higher the frequency, the closer the waves are together and the LOWER the energy carried by the waves will be.
2. TRUE OR FALSE: The greater the force that produces a wave, the greater the amplitude of the wave and the greater the energy carried by the wave.
3. TRUE OR FALSE: In a transverse wave the higher the wave, the LOWER the amplitude
4. Wavelength is a measure of the distance from the crest on one wave to the crest on the very next wave.
5. TRUE OR FALSE: Speed is a measure of the distance a wave travels in an amount of time
6. TRUE OR FALSE: As a wave enters a different medium, the wave’s speed changes. Waves travel at different speeds in different media
7. TRUE OR FALSE: The highest point of a transverse wave is the crest and the lowest point is called a trough.

Answers

Answer:

Explanation:

true true fauls true fauls fauls

1 . The higher the frequency, the closer the waves are together and the LOWER the energy carried by the waves will be. FALSE

2. The greater the force that produces a wave, the greater the amplitude of the wave and the greater the energy carried by the wave. TRUE

3. In a transverse wave the higher the wave, the LOWER the amplitude FALSE

4.Wavelength is a measure of the distance from the crest on one wave to the crest on the very next wave, TRUE
5. Speed is a measure of the distance a wave travels in an amount of time TRUE

6. As a wave enters a different medium, the wave’s speed changes. Waves travel at different speeds in different media TRUE

7. The highest point of a transverse wave is the crest and the lowest point is called a trough. TRUE

What is Wave ?

A wave is a disturbance in a medium that carries energy and  as well as momentum. Energy can be transferred in the form of wave in the medium. there are two types of wave,

longitudinal wave : in which, vibration of the medium (particle) is parallel to propagation of the wave as shown in the fig.1. Sound wave is a longitudinal wave.

Transverse wave : in which, vibration of the medium (particle) is perpendicular to propagation of the wave as shown in the fig.2. Light wave is a longitudinal wave.

1. E = hυ where υ is a frequency which shows direct relation between Energy E and frequency υ. Hence it is false.

2. True

3. In a transverse wave the higher the crest in the wave, the higher the amplitude. FALSE

4. True

5. True, Speed = Distance÷Time

6. due to change in refractive index, velocity changes TRUE

7.True

To know more about wave, click :

https://brainly.com/question/3639648

#SPJ3

True or False. The fulcrum of a first class lever is between the output force and an input force.

Answers

Answer:

True

Explanation:

A first-class lever is a lever in which the fulcrum is located between the input effort and the output load. In operation, a force is applied (by pulling or pushing) to a section of the bar, which causes the lever to swing about the fulcrum, overcoming the resistance force on the opposite side

I AM TIMED !! 30 POINTS Which is the smallest possible particle of an element?
O molecule
O atom
O compound
O matter

Answers

Answer:

atoms

Explanation:

they are the smallest

The correct answer is Atoms!

The illustration shows the forces in Newtons (N) acting on three different blocks. Which
boxes will move under these conditions?

Answers

Answer:a

Explanation:because I know

Answer:

B & C

Explanation:

the first block will not move

Which of these would have the highest temperature?
ice
water
water vapor

Answers

Answer:

Water vapor

Explanation:

Water Vapor has the highest temperature, due to its being in a gas state, and gases usually have very high temperatures, for example steam when you boil pasta.

Hope this helps you! Have a nice day!

Why is physical activity important?
O It helps keep you healthy.
It helps control your weight
It helps imcove your balance and coordination
All of the Above
at least one activity you can enjoy to help you get your 60 min

Answers

Answer:

All of the Above

walking

1
A cat walks 4 meters north, 7 meters east, 4 meters south, and then 3
meters west. What is the cat's displacement? *

Answers

Answer:90+80+90=360

Explanation:10x+60–50

The cat’s displacement would be 4 Newts because the forces that are acting on it vertically are congruent.

What is the charge on an object that experiences a force of 5 Newtons in an electric field of 50 Newtons per coulomb?

Answers

Answer:

Explanation:

F = qE

F is the force in Newtons

q is the test charge

E is the electrical field produced by the source charge

[tex]5=q(50)\\q=1*10^-^1Coulombs[/tex]

The magnitude of charge on the object is of 0.1 C.

Given Data:

The magnitude of electric field is, E = 50 N/C.

The magnitude of Electric force is, F = 5 N.

The region where any particle feels the effect of electric force on itself, due to other charged entities, is known as Electric field. And the relation between the electric force and electric field is given as,

F = E × q

Here,

q is the magnitude of charge on the object.

Solving as,

q = F/E

q = 5 / 50

q = 0.1 C

Thus, we can conclude that the magnitude of charge on the object is of 0.1 C.

Learn more about the electric field here:

https://brainly.com/question/8971780

1 2 3 4 5 6 7 8 9 10

TIME REMAINING

09:57:20

A scientist discovers a deep bowl-like divot under the ocean off the coast of eastern Mexico that is many kilometers across. The layers of the ground all around the continent from around the time that structure formed contain large amounts of iridium and a larger number of fossils than is normally found. What most likely caused the bowl-like structure?


a meteorite impact

an asteroid impact

an iridium spike

a Kuiper object impact

Mark this and return

Answers

Answer:

answer is an ASTEROID

Explanation:

Iridium is a material that forms at very high temperatures, which is why its presence shows that in the impact zone the temperature rose a lot, so we can imagine that the impact was by a body traveling at high speed, which is consistent with a body that comes from space.

An asteroid is a celestial body of some size that when entering the atmosphere heats up and collides with the Earth, leaving a crater that in general is much larger than the diameter of the object.

A meteorite is a small fraction of an asteroid that has been separated by the pressure of the sun, the attraction of the Earth, Moon or another massive body or a combination of these effects, in general, meteorites are small and when they enter the atmosphere They are consumed by heat and very few reach the surface of the Earth, those that do reach are very small.

Therefore due to the size of the crater and the existence of many dead animals around the body must have been very heavy, so the correct answer is an ASTEROID

Answer:

B) An asteroid impact

Explanation:

Rain and wind place which type of load on structures?
A) Dynamic load
B) Soft load
C) Gradual load
D) Static load

Answers

It’s a dynamic load.
Hopes this helps :)
answer:a is the answer

The velocity of a car increases from 10 km/h to 50 km/h in 5 seconds. What is its acceleration?

Answers

Answer:

2.22m/s^2

Explanation:

Whats the word for when "velocity equals 0 and direction changes" Its 14 letters, and I have _ _ _ _ i _ _ _ _ _ h_ i _ _ t

Answers

Answer:

Maximum Height

Explanation:

The maximum height is the highest point reached by a projected body. At this point, final velocity, v of the body is equal to 0; because upward motion is at its peak and the body start to fall again.

Hence, final velocity v is always 0 at this maximum point and the direction of motion changes from upward to downward.

Final velocity at this maximum height is zero because of the directional change experied by the object and the fact that upward motion of the body terminates at this point.

Can someone pls help me with these questions I’ll give brainliest

Answers

Answer:

1= ionic bond

2 =covalent bonding

Explanation:

can answer the others sorry

A 0.225 kg sample of tin initially at 97.5°c is dropped into 0.115 kg of water. the initial temperature of the water is 10.0°c. if the specific heat capacity of tin is 230 j/kg • °c, what is the final equilibrium temperature of the tin-water mixture

Answers

Answer:

The final equilibrium temperature of the tin-water mixture is approximately 18.468 °C

Explanation:

The parameters of heat energy transfer from the tin to the water are given as follows;

The mass of the sample of tin, m₁ = 0.225 kg

The initial temperature of the tin, T₁ = 97.5 °C

The mass of the water into which the tin is dropped, m₂ = 0.115 kg

The initial temperature of the water, T₂ = 10.0 °C

The specific heat capacity of tin, c₁ = 230 J/(kg·°C)

The specific heat capacity of water, c₂ = 4,200 J/(kg·°C)

Let 'T' represent the final equilibrium temperature of the tin-water mixture, we have;

The heat lost by the tin, ΔQ[tex]_{tin}[/tex] = The heat gained by the water ΔQ[tex]_{water}[/tex]

∴  ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex]

Where;

ΔQ[tex]_{tin}[/tex] = m₁·c₁·(T₁ - T)

ΔQ[tex]_{water}[/tex] = m₂·c₂·(T - T₂)

By substitution, we have;

ΔQ[tex]_{tin}[/tex] = 0.225 kg × 230 J/(kg·°C) × (97.5°C - T)

ΔQ[tex]_{water}[/tex] = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

From ΔQ[tex]_{tin}[/tex] = ΔQ[tex]_{water}[/tex], we have;

0.225 kg × 230 J/(kg·°C) × (97.5°C - T) = 0.115 kg × 4,200 J/(kg·°C) × (T - 10.0°C)

∴ 5,045.625 J - 51.75 J/°C × T = 483 J/°C × T - 4,830 J

5,045.625 J + 4,830 J = 534.75 J/°C × T

∴ 534.75 J/°C × T = 9,875.625 J

T =  9,875.625 J/(534.75 J/°C) = 18.4677419 °C ≈ 18.468 °C

The final equilibrium temperature of the tin-water mixture, T ≈ 18.468 °C.

El carrusel de la feria del pueblo tiene una velocidad de 2 rpm. En un determinado instante se corta la corriente y como consecuencia del rozamiento, aparece una aceleración de frenado de 0,05 rad/s2.

Answers

Answer:

t = 4.19 s,   θ = 0.437 rad

Explanation:

This is an exercise in rotational kinematics in this case we indicate the angular velocity and the angular acceleration, asking for the time and the angle it takes to stop.

          w = w₀ + α t

          w² = w₀² + 2 α θ

when the system stops the angular velocity is zero

          0 = w₀- α t

          0 = w₀² - 2 α θ

          t = w₀ / α

          tea = w₀² / 2 α

let's reduce the magnitudes to the SI system

          w₀ = 2 rpm (2π rad / 1 rev) (1 min / 60s) = 0.209 rad / s

let's calculate

         t = 0.209 / 0.05

         t = 4.19 s

         θ = 0.209 2/2 0.05

         θ = 0.437 rad

how high is the pole from which the lamp fell freely if it hits the ground at a speed of 15 m/s​

Answers

Answer & Explanation:

The acceleration due to gravity is about 10 m/s^2.

That means a the speed of a falling object will increase by 10 m/s every second that it falls.

We know that the lamp hits the ground at 15 m/s.

That means the lamp has been falling for

[tex]\frac{15 m/s}{10 m/s^{2} } = 1.5 s[/tex]

Now we use the formula  [tex]h = \frac{1}{2} gt^{2}[/tex]  to calculate the height, where

h is the height

g is the acceleration due to gravity and

t is the time taken to fall a height of h.

h = 1/2 x 10 x 1.5^2 = 11.25 m

A person on a daily diet of 2,500 calories should get no_more than
calories from fat each day.

Answers

Answer:

35%

Explanation:

Answer:

its 83

Explanation:

A fault is formed by the movement of a ___ plate boundary
A.convergent
B.traditional
C.divergent
D.transform

Answers

Transform
Hope this helps

A bullet (m = .005 kg) moving at 500 m/s strikes
and sticks in a block of wood (m = 5 kg). What is
the final velocity of the wood/bullet mass?

Answers

Answer:

fif = 0.01 x 5000 = 50 N

Explanation:

u=150 m/s

v=0

m-10 y =0.01 kg

t=0.03s

s

v=utat

o= 150+a (0.03)

therefore a= -5000 m/s power 2

v power 2 = u power 2 + 2as

0=150 power 2+ 2 x (-5000) x s

therefore f=2.25 m

Write down the use of light pipe.???​

Answers

Light pipes are used to illuminate small areas. For example, light from a small LED to a switch indicator or a small graphic. Typically, a light pipe would go from a circuit to the area that requires illumination.

Someone plz help I’m on a time limit :(

What patterns occur in the Earth-Sun-Moon system that allow us to identify the cause of
eclipses?

Answers

Answer:

Earth's rotation and orbit and the Moon's orbit cause observable patterns (Day and night, seasons, phases of the Moon, tides).

A bike travels at 120 meters in 60 seconds. What is the speed of the bike?

Answers

Answer:

2 m/s

Explanation:

A 1000kg truck is moving at a velocity of 4m/s what is it's momentum?

Answers

Answer:

4000 kg m/s

Explanation:

p=mv

p = momentum in kg m/sm = mass in kgv = velocity in m/s

substitute values into the formula above to get:

p=1000x4

p=4000 kg m/s

The less mass an object has, the --- its gravitational f

Answers

Answer:

The less mass an object has, the less its gravitational  [force.]

Explanation:

Newton's Law of Gravity states that [tex]F_G=\frac{Gm_1m_2}{r^{2}}[/tex]. The two m values are the objects' masses, G is the gravitational constant, and r is the distance between the objects' centers. Notice how the mass values are in the fraction's numerator? That means increasing the mass of one or both objects increases [tex]F_G[/tex]. That also implies the inverse; decreasing the mass of one or both objects decreases [tex]F_G[/tex]!

I hope this helps you understand this concept a little more! Have yourself a fantastic day, 'kay?

9. In a closed circuit made of a battery, a wire, a lightbulb, and a switch which part's main responsibility is allowing electricity to flow over a distance?
A: battery
B: light bulb
C: switch
D: wire

Answers

Answer:

d

Explanation:

Answer:

D: wire

Explanation:

How would you describe your appetite over the past couple of weeks? Have your eating habits altered in any way?

Answers

Answer:

no im in a rehab program so we eat the sam shi every day

Explanation:

brainlest?

Explanation:

During lockdown, I ate LOADS OF JUNK FOOD. TRUST ME!!

I gained 14 kg of weight and became 68 kg

just due to junk food.I am 13 btw and at that time I was 5 feet 4 so definitely fat. all those pizzas and burgers and all.then I realised that I have gained weight. I have to REDUCE MY WEIGHT. I am quite determined on what I say. it took me 3 months or so and I finally got back to my original weight. How? just by going for a stroll everyday, eating healthy and constantly working out. eating less is not the solution,eating less calories is the solution.Also, by eating healthy food,I grew taller. I am 5 feet 6 now. So yes, definitely it helps put alot and keep eating healthy food and you will definitely be healthy.

Thank You.

A horizontal net force F is exerted on an object at rest. The object starts at x=0 m and has a speed of 4.0 m/s after moving 4.0 m along a horizontal frictionless surface. The net force F as a function of the object's position x is shown below

Answers

Explanation:

The solution is be found in the attachment.

A horizontal net force F is exerted on an object at rest. The object starts at x = 0 m and has a speed of 4.0 m/s after moving 8.0 m along a horizontal frictionless surface. The net force F as a function of the object's position x is shown below.

What is the mass of the object?

Answer: 30 kg

what best decribes the science method

Answers

Making prediction , hypothesis and guessing to see if it’s right , and leading
careful observation, applying rigorous skepticism about what is observed

A 14-gauge copper wire of diameter 1.628 mm carries a current of 12.5 What is the potential difference across a 2.00 - m length of the wire? *p=1.47x10^-8

Answers

Answer:

[tex]V=1.76\times 10^{-4}\ V[/tex]

Explanation:

Given that,

The diameter of a wire, d = 1.628 mm

Radius, r = 0.814  mm = 0.000814m

Current, I = 12.5 mA

The length of the wire, l = 2m

The resistivity of the wire, [tex]\rho=1.47\times 10^{-8}\ \Omega-m[/tex]

We need to find the potential difference across the wire. We know that the resistance of the wire is given by :

[tex]R=\rho\dfrac{l}{A}[/tex]

Also, V = IR

[tex]\dfrac{V}{I}=\rho\dfrac{l}{A}\\\\V=\dfrac{\rho l I}{A}\\\\V=\dfrac{1.47\times 10^{-8}\times 2\times 12.5\times 10^{-3}}{\pi \times (0.000814)^2}\\\\V=1.76\times 10^{-4}\ V[/tex]

So, the potential difference of the wire is [tex]1.76\times 10^{-4}\ V[/tex].

Other Questions
Can someone help with 8 and 9 On Saturday, Luke drove 5x 4 miles. On Sunday, he drove 3x 3 miles. What is the difference in miles driven? A. 2x+1B. 2x + 7C. 2x - 1D. 2x - 7PLEASE ANSWER ASAP IM TAKING THE TEST RN In listening to the talk did you feel connect to or identify with Adichie Which term best describes the two lines represented by the equations below? Davy Crockett saves the world, summarize Terry rides his bike to work. Ittakes him 40 minutes to go 7miles. What is Terry's rate perhour?(** how many minutes inan hour**) What is the equation of a line perpendicular to y= 3x +6 that crosses the ordered pair (3,2).(Hint: a line perpendicular to an equation has an opposite reciprocal slope) Explain three features of a bank current account (chequebook account). What is the answer to 6x5x3= 5. How many pairs of chromosomes are there in eachhuman *body cell? Select the correct answer.A computer using a connectionless network protocol sends too many data packets to another computer, causing loss of a few packets. As a result, the message appears jumbled to the user at the destination computer. How does TCP overcome this issue?A. by using flow controlB. by using cablesC. by using terminalsD. by using a larger IP addressPlease only answer if you are 100% sure what countries held land in latin america in 1784? solve the equation for all values of x by completing the square [tex] {x}^{2} - 35 = - 2x[/tex] Which statements accurately describe the Persian Empire?Choose all correct answers.1. Cyrus allowed conquered peoples to keep their cultures.2. Darius I built a network of good roads for communication3. The Persians avoided using ideas from the peoples they conquered4. The Persian arm defeated the Athenians at the Battle of MarathonPlease HelpI need this answer today Sina cleans the blackboard.Change to past perfect tense A somatic (body) cell containing 40 chromosomes will have _____ chromosomes in its gametes (sex cells).Group of answer choices2080400 Three fifths of the students in the cafeteria bought their lunch from the school. The rest brought their lunch from home. 27 of the students bought their lunch. Let t represent the total number of students in the cafeteria. Write an equivalentexpression- 4(5 + 7g) my best _________ is angel An equimolar mixture of X (g) and Y (g) is placed inside a rigid container at constant temperature. The particle diagram above represents the changes that occur over time. Based on the particlediagram, which of the following best predicts whether or not the system has reached equilibrium by 300 s?a. It is not possible to determine that the system has reached equilibrium by 300 s because the stoichiometry of the reaction is not known.b. it is not possible to determine that the system has reached equilibrium by 300 s because the amounts of X, Y, and XY have continued to changec. The system has reached equilibrium by 300 s because the rate of formation of XY is constantd. The system has reached equilibrium by 300 s because the rates of consumption of X and Y are equal