Answer:
7.00335g
Explanation:
[tex]n=\frac{V}{V_m} \\n = \frac{11.2}{22.4} \\n= 0.5 mol[/tex]
[tex]n=\frac{m}{M} \\m=nM\\m=(0.5)(14.0067)\\m=7.00335g[/tex]
Part g
consider the melting points of sugar and salt, as well as the states of sugar, salt, and oil
at room temperature. what can you conclude about the attractive forces between
particles in the three substances?
Salt and sugar have strong attractive forces whereas oil has weak attractive forces between particles.
What type of attractive forces present in salt, sugar and oil?The attractive forces between particles in the salt and sugar substances have strong because of its solid state while on the other hand, the attractive force between particles of oil is weak because of its liquid state.
So we can conclude that salt and sugar have strong attractive forces whereas oil has weak attractive forces between particles.
Learn more about force here: https://brainly.com/question/12970081
#SPJ1
The strength of the attractive forces between the molecule of oil, sugar and salt increases from oil to sugar to salt.
What is melting point of a substance?The melting point of a substance is the temperature at which the solid substance melts.
The melting point of a substance is a constant for a pure substance.
The higher the attractive forces between the molecules of a substance, the higher the melting point will be.
Between the three substances, oil has the lowest melting point while salt has the highest melting point.
Therefore, the strength of the attractive forces between the molecule of oil, sugar and salt increases from oil to sugar to salt.
Learn more about melting point at: https://brainly.com/question/40140
#SPJ1
Which functional group is found in an ester? a central carbon is double bonded to o above, and single bonded to r below left and right. a central carbon is double bonded to o above, and single bonded to r below left and to o r prime below right. r single bond o h. r single bond n h 2.
Ester is characterized by a central carbon atom that is double-bonded to an oxygen atom, single-bonded to R, and single-boned to R prime.
What is an ester?It is an organic functional group composed of the following:
One central carbon atomThe carbon atom is double-bonded to an oxygen atomThe carbon atom is single-bonded to a primary alkyl groupThe carbon is single-bonded to a secondary alkyl groupThus, the structure of an ester looks like the attached image.
More on esters can be found here: https://brainly.com/question/10840252
#SPJ1
Answer:
B
Explanation:
Which element has the largest atomic radius?
Answer:
Ba
Explanation:
Atomic radius increases going right to left, and up to down.
So the closest element to the bottom left corner is Ba.
Classify each of the following as a homogeneous and heterogeneous mixture
Soda water, wood, air, soil, vinegar, filtered tea
Soda water, wood, air, soil, vinegar, filtered tea.
Answer:
Homogeneous mixtures : Soda water, vinegar and filtered tea. Heterogeneous mixtures : Wood and soil.
I-131 undergoes beta-minus decay. The chemical symbol for the new element is.
The chemical element that is formed when I-131 undergoes beta-minus decay is Xe.
What is a beta minus decay?A beta minus decay is one in which an electron is changed into a proton. The atomic number of the daughter nucleus will increase by one unit and is one place after the parent in the periodic table.
The chemical element that is formed when I-131 undergoes beta-minus decay is Xe.
Learn more about beta decay:https://brainly.com/question/25455333
#SPJ1
how to Use your trend line to estimate the gas pressure of this system at 0°C.
Answer:
The slope of the trend line is 2.55; as the temperture.
Explanation:
If someone asked you to mix up a bag of ringers solution with 150 meq/l of na , 10 meq/l of k , 8 meq/l of ca2 , and 197 meq/l of mg2-, how many grams of mg2- would you add to the mixture?
The normality is the ratio of the equivalent to the volume of the solvent. To the mixture, 1.182 gms of magnesium should be added.
What is Normality?Normality (N) is the grams or moles of solute per liter of solution.
Magnesium has 2 valence electrons in the outermost shell so,
1 mEq of Mg⁻² ions = atomic number of Mg ÷ valence electron
= 12 ÷ 2
= 6 mg
In a liter solution having 197 meq/l of Mg⁻²:
197 meq/l of Mg⁻² × 6 = 1182 mg
Therefore, 1.182 gms of magnesium ions should be added to the mixture.
Learn more about gram equivalents here:
https://brainly.com/question/14833835
#SPJ4
What happens when a solid is dissolved into a liquid?
Answer:
The solid has broken down into pieces so small that its particles spread all throughout the new mixture.
An example of polytamic anoin would be a. Ca+2 b. NH4+ c. F d. PO4-3
[tex]PO_4^{-3}[/tex] and [tex]NH^{4+}[/tex] are polyatomic anions composed of two or more atoms.
What is a polyatomic anion?A polyatomic ion is an ion composed of two or more atoms. Examples: The hydroxide cation ([tex]OH^-[/tex]) and the phosphate cation ([tex]PO_4^{3-}[/tex]) are both polyatomic ions.
[tex]PO_4^{-3}[/tex] and [tex]NH^{4+}[/tex] are the polyatomic anions because both contain more than 1 atom.
Hence,[tex]PO_4{-3}[/tex] and [tex]NH^{4+}[/tex] are polyatomic anions composed of two or more atoms.
Learn more about the polyatomic anion here:
https://brainly.com/question/13544727
#SPJ1
Decomposition occurs when...
Answer:
Decomposition begins at the moment of death, caused by two factors: 1.) autolysis, the breaking down of tissues by the body's own internal chemicals and enzymes, and 2.) putrefaction, the breakdown of tissues by bacteria.
Explanation:
hope it will help you
Balance the following chemical reaction :p(s) + cl2(g) = pcl5(s)
Answer:
[tex]2\text{P}+ 5\text{Cl}_2 \rightarrow 2\text{PCl}_5[/tex]
Explanation:
Answer:
2P (s) + 5PCl₂ (g) → 2PCl₅ (s)
Explanation:
There are 2 chlorine atoms on the reactant side and 5 chlorine atoms on the product side.
Hence, multiply the left chlorine molecule by 5 and right compound by 2.
⇒ P (s) + 5 × Cl₂ (g) → 2 × PCl₅
⇒ P (s) + 5Cl₂ (g) → 2PCl₅ (s)
But, now we see that there is 1 phosphorus atom on the reactant side and 2 phosphorus atoms on the right.
So, multiply the left phosphorus atom by 2 to balance.
⇒ 2 × P (s) + 5PCl₂ (g) → 2PCl₅ (s)
⇒ 2P (s) + 5PCl₂ (g) → 2PCl₅ (s)
Why is it important to convert into units of kelvin before using the ideal gas law?.
How many particles would be found in a 12.7g sample of ammonium carbonate?
answer choices are:
2.9 x 10^22 particles
7.96 x 10^22 particles
i cannot get it, please help
multiplying terrorist to power 23, divided by 96. Multiplied by 12.7. so this is 76.48
7.96 x 10²² particles would be found in a 12.7g sample of ammonium carbonate. A particle is a tiny, localized item.
What is particles in chemistry?A particle is a tiny, localized item that may be defined by a number of physical or chemical characteristics, including volume, density, and mass. They range significantly in size or number from tiny particles like atoms to subatomic particles such as the electron.
Depending upon their density, particles can potentially be utilized to mimic even bigger things, such as moving celestial bodies or a throng of people. Although the meaning of the word particle is quite broad, different scientific disciplines might refine it as necessary. Any substance made up of particles is referred to as a particulate.
number of moles = given mass/ molar mass
= 12.7/ 96.08
= 0.13moles
number of particle= 0.13 × 6.022×10²³
= 7.96 x 10²²
Therefore, 7.96 x 10²² particles would be found in a 12.7g sample of ammonium carbonate.
To know more about particles, here:
https://brainly.com/question/27894549
#SPJ2
How can we tell the distance sediments traveled due to erosion ?
Answer:
more rounded the grains are the more they have been moved around
Explanation:
Generally – the more rounded the grains are the more they have been moved around (i.e. the longer the length of time or distance they have moved). Angular grains cannot have travelled far
geolsoc.org.uk
In a certain reaction at stp, 29.2 l of methane is combusted
with 63.3 l of oxygen.
what volume of excess reactant remains after the reaction is
complete?
The volume of excess oxygen will 2.28 L
Stoichiometric calculationFrom the equation of the reaction:
[tex]CH_4(g) + 2O_2(g) --- > CO_2(g) + 2H_2O(g)[/tex]
The mole ratio of the two reactants is 1:2.
1 mole of gas at STP = 22.4 L
Mole of 29.2 L of methane at STP = 29.2/22.4 = 1.3 moles
Mole of 63.3 L of oxygen at STP = 63.3/22.4 = 2.8 moles.
Thus, oxygen is in excess because 1.3 x 2 = 2.6 moles is needed to react with 1.3 moles methane.
Excess mole of oxygen = 2.8 - 2.6 = 0.2 moles
Volume of 0.2 moles at STP = 22.4 x 0.2 = 2.28 L
More on stoichiometric calculations can be found here: https://brainly.com/question/27287858
#SPJ1
Which of the following statements holds true for a chemical change?
A.
In a chemical change, no new substance is formed.
B.
In a chemical change, a substance changes its phase.
C.
In a chemical change, the molecular structure of a substance changes.
D.
In a chemical change, one substance dissolves into another.
state 2 gases used for combustion
Scientists observe that iron compounds are able to bind to nutrients in waterways experiencing eutrophication. Which change will most likely occur if iron compounds are added to a lake with an overabundance of nutrients? (1 point)
1. Fewer microorganisms will grow on the surface of the lake
2. More areas of hypoxia will occur in the lake.
3. More contaminated water will reach the lake.
4. Less sunlight will reach aquatic plants in the lake.
Which phrase best describes fracking?(1 point)
1. removing the top layer of an ore-bearing mountain to access oil and gas resources
2. using water and chemicals at high pressure to open up fissures to access oil and gas resources
3. using water and chemicals at high pressure to open up fissures to access mineral resources
4. removing the top layer of an ore-bearing mountain to access mineral resources
SOMEONE PLEASE HELP QUICK!!!
(1) Fewer microorganisms will grow on the surface of the lake if iron compounds are added to a lake with an overabundance of nutrients. Hence, option 1 is correct.
(2) Fracking means using water and chemicals at high pressure to open up fissures to access oil and gas resources. Hence, option 2 is correct.
What are microorganisms?An organism that can be seen only through a microscope.
Iron is a natural capping agent which can enhance sediment P binding capacity, thus reducing P availability and shifting a lake from an algal to a macrophyte dominated state. Iron could, however, also impose toxic effects on the biota.
Fracking is the injection of a fluid at high pressure into an underground rock formation to open fissures and allow trapped gas or crude oil to flow through a pipe to a wellhead at the surface.
This technique is used in natural gas and petroleum production.
1) Fewer microorganisms will grow on the surface of the lake if iron compounds are added to a lake with an overabundance of nutrients. Hence, option 1 is correct.
(2) Fracking means using water and chemicals at high pressure to open up fissures to access oil and gas resources. Hence, option 2 is correct
Learn more about the microorganisms here:
https://brainly.com/question/6699104
#SPJ1
Which lists only abiotic factors in this environment?
grass, tree, rock, soil
bird, turtle, grass, tree
sun, water, grass, soil
water, rock, soil, sun
In this case, among the list of components given, the abiotic factors are water, rock, soil, and sun.
What is an abiotic factor?An abiotic factor is a non-living part of an ecosystem that shapes its environment.
Biotic and abiotic factors make up a community via interaction.
Biotic factors are considered living things (having "life") while abiotic factors are simply non-living things.
Hence, in this case, among the list of components given, the abiotic factors are water, rock, soil, sun
Learn more about the abiotic factor here:
https://brainly.com/question/10111151
#SPJ1
[tex] \begin{gathered}\\ \underline{\boxed{\large\leadsto\frak\red{ Answer :- }}} \\ \end{gathered}[/tex]
In this case, among the list of components given, the abiotic factors are water, rock, soil, and sun.What is an abiotic factor?
An abiotic factor is a non-living part of an ecosystem that shapes its environment.Biotic and abiotic factors make up a community via interaction. Biotic factors are considered living things (having "life") while abiotic factors are simply non-living things. Hence, in this case,♠ Among the list of components given, the abiotic factors are water, rock, soil, sun
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
when you draw a bow across a violin string which kind of wave is created in the air surrounding the string
Answer:
When the string on a violin vibrates, waves move in both directions along the string, interfering with each other. These waves are standing waves.
Explanation:
What are Standing Waves?
The Standing Waves are waves generated due to the vibrational frequency that produces reflected waves capable of interfering with the incident waves.
Describe the difference between the rate of diffusion seen for sodium and urea.
What is the speed of light written in standard numerical form?
The conductance of the electric current through the electrolytic solution increases with
a)decrease in dilution
b)increase in dilution
c)increase in concentration
d)low degree of ionization
The conductance of the electric current through the electrolytic solution increases with increase in concentration.
What is an electrolytic solution?An electrolytic solution is a solution containing dissolved electrolyte.
The ions of the electrolyte dissociate and are able to carry electric current around the electrolytic cell.
The higher the concentration of the electrolyte, the more electric current it can conduct due to greater number of ions present.
Therefore, the conductance of the electric current through the electrolytic solution increases with increase in concentration.
Leran more about electrolytes at: https://brainly.com/question/1961090
#SPJ1
Avogadro’s number is the number of particles in one mole of a pure substance, true or false?
Answer: The answer is true.
Explanation: Avogadro's number is a mole, which concludes that this statement is true.
Part A
Look at the graphical display for the group 1 elements. What pattern do you observe about atomic radii as you move from
ydrogen at the top of the table to francium at the bottom?
The atomic radii of the atoms in the group 1 increases down the group as we go from Hydrogen to Francium.
What is atomic radii ?The total distance from the nucleus of an atom to the outermost orbital of its electron is known as its atomic radii or atomic radius.
As we go down the group, the number of orbits or shell increases.
Hence, atomic radii of the atoms in the group 1 increases down the group as we go from Hydrogen to Francium.
Learn more about atomic radii here ;
https://brainly.com/question/14086621
#SPJ1
What happens when a solid is dissolved into a liquid?
O Solid particles float toward the surface layer of liquid particles.
O Solid particles sink down toward the bottom layer of liquid particles.
O Solid particles become evenly dispersed among liquid particles.
O Solid particles become suspended in the middle of liquid particles.
When a solid dissolves in a liquid to form a solution, solid particles become evenly dispersed among liquid particles.
What are solutions?Solutions are formed when a solute particle dissolves in another substance known as a solvent.
Usually, solutions are formed when solids dissolve in liquids.
The solid is the solute while the liquid is the solvent.
When a solid dissolves in a liquid, solid particles become evenly dispersed among liquid particles.
Therefore, solutions are formed when solute particles dissolve in solvents.
Learn more about solutes and solutions at: https://brainly.com/question/25326161
#SPJ1
Answer:
c
Explanation:
chem ed 2022
2H2O + 3HCl ——> 5H2O + Cl
how many moles of H2O are needed to make 3 moles of HCl?
Answer: 2 moles
Explanation:
We know from the equation that for every 3 moles of HCl consumed, 2 moles of water are consumed (based on the coefficients)
So, the answer is 2 moles.
The diagram below shows the geometric structure of the molecule of water H2O what do the symbols (the bigger gray circle) and (the smaller black circle) represent in the model?
1) genetic material
2) cells
3) chemical bonds
4) atoms
Answer:
Chemical bonds
Explanation:
Because it has an image of atoms being held together by chemical bonds.
Why is there an energy crisis if energy is supposedly conserved? Explain your answer and cite one example
Answer:
Energy can neither be created nor destroyed, but it does change its form. And not all forms of energy are usable and it gets dissipated as heat energy and sound energy. The energy that is wasted cannot be recovered.
What mass of Na2CO3 will be required to dissolve in 0.3 L of water to make a 0.5 M solution?
The mass of [tex]Na_2CO_3[/tex] that will be required to be dissolved in water would be 15.9 grams
Solution preparationRecall that: molarity = mole/volume in L
In this case, the volume is 0.3 L and the molarity is 0.5 M.
Thus, mole = molarity x volume = 0.5 x 0.3 = 0.15 moles
Mass of 0.15 moles [tex]Na_2CO_3[/tex] = 0.15 x 106 = 15.9 grams
More on solution preparation can be found here: https://brainly.com/question/14667249
#SPJ1