Answer:
A
Explanation:
If a convergent boundary involves a continental landmass and an ocean basin, a subduction zone forms. Subduction occurs where a plate moves underneath the other.
A rock sample from the moon includes a mineral that contains small amounts of the radioactive isotope Potassium-40 and its daughter element Argon-40 (half-life of 1.3 billion years). This mineral would not form with any Argon-40. Consider a crystal with 7 atoms of Argon-40 for every 1 atom of Potassium-40. How many atoms of Potassium-40 were present when the crystal formed for each atom of Potassium-40 that exists today
Answer:
There were originally 8 atoms of Potassium-40.
Explanation:
The half-life of a radioactive material is the time taken for half the original material to decay or the time required for a quantity of the radioactive substance to reduce to half of its initial value.
If the original material formed without any Argon-40, it means that the atoms originally present were Potassium-40 atoms.
Presently, there are 7 Argon-40 atoms for every 1 of Potassium-40, we can deduce the number of half-lifes the Potassium-40 has undergone as follows :
After one half-life, (1/2) there will be one Potassium-40 atom for every Argon-40 atom.
After a second half life, 1/2 × 1/2 = 1/4: there will be one Potassium-40 atom for every three atoms of Argon-40.
After a third half-life, 1/4 × 1/2 = 1/8: there will be one Potassium-40 atom for every 7 atoms of Argon-40.
Since there are 1/8 atoms of Potassium-40 presently, there were originally 8 atoms of Potassium-40.
Can someone plz help me with this one problem plz
(I’m marking brainliest)!!!!
Answer:
the best answer is c because when there is more ppl there are less resources
An artificial vesicle containing a 1 M glucose solution is composed of a phospholipid bilayer lacking any protein components other than aquaporin channels. Assuming an ideal solution, what is the ratio of the osmotic pressure measured immediately after immersion of the vesicle in de-ionized water to the osmotic pressure measured immediately after immersion of an identical vesicle containing the original volume of 1 M glucose solution added to an equal volume of 1 M KCl solution in deionized water
Answer:
A: 0.67
The situation described in the question is analogous to a semipermeable membrane. Water is able to pass through aquaporin channels present in the liposome, but large uncharged particles (glucose) and ions (K+ and Cl -) are impermeable and will remain trapped within the liposome. If assumed to be ideal, the osmotic pressure, π, exerted by the solution due to molarity differences across the membrane is defined as π = iMRT, where i is the van't Hoff factor, M is the molarity of the solution, R is the universal gas constant, and T is the absolute temperature of the solution. A change in osmotic pressure at constant temperature is due to changes in iM, a term that is equivalent to the concentration of dissolved particles produced by solute in solution. When compared to the original volume of 1 M glucose, the new combined solution has twice the volume and three times the number of dissolved particles (1 M KCl, a strongly electrolytic solution, produces 1 M concentrations of both K+ and Cl- in solution), or an increase in the concentration of dissolved particles by a factor of 1.5. This is equivalent to a combined molarity of dissolved particles of 1.5 M. The ratio of osmotic pressure is then [1 M dissolved glucose] / [1.5 M dissolved glucose + KCl] = 0.67
Explanation:
What does a hygrometer measure?
Answer:
humidityExplanation:
Hygrometer, instrument used in meteorological science to measure the humidity, or amount of water vapour in the air. Several major types of hygrometers are used to measure humidity.
True or False. Chemical changes only rearrange the elements that are
already present.
True or False. The reactants and the products of a chemical equation
always have the same number of atoms.
Here's link to the answer:
tinyurl.com/wpazsebu
Explain the electrolysis of acidified water
Answer:
yqaeh
Explanation:
Electrolysis of acidified water
Water is a poor conductor of electricity, but it does contain some hydrogen ions , H +, and hydroxide ions, OH -. These ions are formed when a small proportion of water molecules naturally dissociate . ... H + ions are attracted to the cathode , gain electrons and form hydrogen gas.
spheres are not perfect in space. But <> is in the cause of their shape.
Answer:
<> yes
Explanation:
khan academy sucks. can someone answer this? :)
HELPP ILL GUVE YOU LOTS OF POINTS EVERYTHING U WANT I REALLY NEED HELP
Answer:
jupiter is your answer
Explanation:
you weigh more there
How many grams of Ag2S
are produced from 10.0
grams of AgI?
10
AgI + Nazs
Ag2S +NaI
Answer:
10.0 g of AgI will produce 5.28 g of Ag₂S
Explanation:
The balanced equation of the reaction is given below:
2AgI + Na₂S ----> Ag₂S + 2NaI
From the equation of reaction, 2 moles of AgI produces 1 mole of Ag₂S
The moles of a substance is related to its mass by a quantity known as molar mass which is defined as the mass of one mole of that substance.
Molar mass of AgI = (108 + 127) g = 235 g
Molar mass of Ag₂S = (108 × 2 + 32) g= 248 g
Mass of 2 moles of AgI = 2 × 235 g = 470 g
470 g of AgI produces 248 g of Ag₂S
10 g of AgI will produce 248 /470 × 10 g of Ag₂S = 5.28 g
Therefore, mass of Ag₂S produced = 5.28 g
Please answer thank you so much!
that isssssss? (thank you whoever answers in advance)
Answer:
c
Explanation:
A pathogen or infectious agent is a biological agent that causes disease or illness to its host. The term is most often used for agents that disrupt the normal physiology of a multicellular animal or plant. However, pathogens can infect unicellular organisms from all of the biological kingdoms.
Answer:
Harmful to living organisms
Explanation:
tbh, quizzlet lol
8. If a chemical reaction such as photosynthesis begins with 6 atoms of carbon (C), how many atoms of carbon (C) should be in the products? A. 12 atoms of carbon (C) B. 6 atoms of carbon (C) c. 3 atoms of carbon (C) D. 2 atoms of carbon (C)
A. 12 atoms of carbon (C)
B. 6 atoms of carbon (C)
C. 3 atoms of carbon (C)
D. 2 atoms of carbon (C)
Answer
b
Explanation:
Q4
Which of the following is an example of nonpoint source pollution?
A. industrial effluent
B. Agricultural runoff
C. illegal dumping of waste
D. Oil leaking from your car
Answer:
Option C.
Ilegal dumping of waste
Explanation:
This is because non point source of pollution refers to source of pollution that are many and not directly one which is illegal or does not meet the legal term. This type of pollution does not have a point source, it has many sources and this type of pollution is cause by rainfall or precipitation. Where when the rain fall, it wash away the waste through to water bodies, causing pollution and endangering water bodies.
A bottle of an unknown liquid has a volume of 6.3 mL and mass 255.15 g. What is its density?
Answer:
40.5 g/mL
Explanation:
Density is a measure of a substance's mass over its volume.
d = m/v
Therefore d = 255.15g/6.3mL = 40.5 g/mL
When dissolved in water, all aclds will
Answer:
when dissolved in water they dissociate in anion and H+ cation.
Explanation:
When dissolved in water, acids donate hydrogen ions (H+). Hydrogen ions are hydrogen atoms that have lost an electron and now have just a proton, giving them a positive electrical charge. Bases, on the other hand, mixed with water yield hydroxide ions (OH-).
Circle all that apply for an anion.
a. Positively charged
b. Negatively charged
c. Metal
d. Nonmetal
e. Loses electrons when formed
f. Gains electrons when formed
g. Listed first in a compound
h. Listed second in a compound
Answer:
b. d. f. h
Explanation:
Anions are negatively charged. They are usually non metals with few exceptions. They need to gain electrons in order to form and they are always listed after cation in a compound.
What is the experimental yield of Li2O?
Can you please help me it’s not a hard question
__Is when water changes from a solid to a liquid
When water changes from a solid to a liquid it is called melting.
Solid ice melts and forms into a liquid: water.
If this incorrect, please, don't refrain to tell me. Thank you.
Most particles would travel____from their source to a screen that lit up
when struck.
Answer: in a straight path!
Explanation: hope this helps
pls i have a chemistry test answers asap :'(
Answer:
Zinc is more active than copper.
Explanation:
Now, the reason is that Zinc loses its valence electrons more easily than copper to take part in a reaction.
Joseph wonders what kinds of animals that are carnivores live in his neighborhood. What skill will Joseph use to investigate the variety of those consumers living in his neighborhood. The subject is still science
I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
Answer:
I think its C
Explanation:
c
What ratio of NaCN to HCN is needed to prepare a pH 9.40 buffer? (Ka of HCN is 4.9 × 10⁻¹⁰)
Answer: The ratio of NaCN to HCN is, 1.26
I went for a walk the other day. I went four blocks east, then seven blocks south, then one block west and finally
eight blocks north
a.What distance did I travel?
b. What's my displacement?
Answer:
a) distance is 4+7+1+8=20 blocks
b) displacement is 10 blocks
Explanation:
find displacement: x and y
x axis displacement = 4-1 = 3 blocks
y axis displacement = -7+8= 1 block
displacement = the square root of 3^2 + 1^2
= 9+1 = 10 blocks.
You can find the angle of displacement with respect to the initial position using trig identities, if you wish.
What vale is represented by the symbol Mr
the answer for this question is Mister
How does the human body build the complex
molecules it needs?
Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case
Answer:
Dehydration synthesis reactions build molecules up and generally require energy, while hydrolysis reactions break molecules down and generally release energy. Carbohydrates, proteins, and nucleic acids are built up and broken down via these types of reactions, although the monomers involved are different in each case.
Explanation:
De la reacción 3Zn+ 2H2PO4----> Zn3(PO4)2 +2H2 por cada 9 moles de zinc cuantos moles de fosfato de zinc se producen
Answer:
Por cada 9 moles de zinc, 9 moles de fosfato de zinc se producen.
Explanation:
La reacción balanceada es:
3 Zn+ 2 H₂PO₄ → Zn₃(PO₄)₂ + 2 H₂
Por estequiometria de la reacción (es decir, la relación entre la cantidad de reactivos y productos en una reacción química), las siguientes cantidades de moles de cada compuesto participan de la reacción:
Zn: 3 moles H₂PO₄: 2 moleZn₃(PO₄)₂:1 mole H₂: 2 molesEntonces podes aplicar la siguiente regla de tres: si por estequiometria 3 moles de zinc produce 1 mol de fosfato de zinc, 9 moles de zinc cuántos moles de fosfato de zinc producirá?
[tex]moles de fosfato de zinc=\frac{9 moles de zinc*1 mole de fosfato de zinc}{3 moles de zinc}[/tex]
moles de fosfato de zinc= 9
Por cada 9 moles de zinc, 9 moles de fosfato de zinc se producen.
Calculate the number of atoms
in 10.0g of He.
A. 3.83 x 1023
B. 2.41 X 1024
C. 1.51 X 1024
D. 6.02 x 1023
1 point
have specific requirements that need to be met in order for an
entrepreneur to be considered.
O Loans
O Investments
O None of the other answers
O Grants