Answer:
heres your answer 50gms
Which word equation shows hydrogen reacting with oxygen to form water?
oxygen + water → hydrogen
hydrogen + oxygen → water
oxygen + water hydrogen + water
→
Ohydrogen + water →→ oxygen
Answer:
calcule o PH e POH de 2,625g de HCLO em 2000cm3 (cl=35,5)
Explanation:
The word chemical equation which hydrogen reacting with oxygen to form water is hydrogen + oxygen → water.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
Learn more about chemical equation,here:
https://brainly.com/question/30087623
#SPJ7
Match the following terms:
Answer:
See below ~
Explanation:
A to B
⇒ Solid Phase
==========================================================
B to C
⇒ Melting
==========================================================
C to D
⇒ Liquid Phase
==========================================================
D to E
⇒ Vaporizing
============================================================
E to F and beyond
⇒ Gas Phase
ILL GIVE BRAINLY!!!!!!
How many different elements are involved in the reaction shown below?
CH4 + 2 O2 → CO2 + 2 H2O
Answer:
four
Explanation:
There is four
CH 4 methane
O2 oxygen
CO2 carbon dioxide
H20 water
Prove that: F = Gm₁m₂ /d^2
Answer:
hope it helps
and give brainliest
Is industry pool or flux
Answer:
What is the difference between pools and fluxes?
Image result for Is industry pool or flux
Fluxes describe the movement of energy and matter between different pools. When you pour a glass of juice for yourself, the juice bottle and the glass are both “pools” for the apple juice. The act of pouring it from the bottle to the glass is the flux
Explanation:
how do electrostatic forces affect the electrons in an atom?
Answer:
allows the atoms of different elements to bond together to form new substances
The negatively charged electrons are held together by electrostatic force by the positively charged atomic nucleus.
What is electrostatic forces?Electrostatic forces are non-contact forces that pull or push on objects without contacting them.
The positively charged atomic nucleus holds the negatively charged electrons together with electrostatic force.
Thus, in this way electrostatic forces affect the electrons in an atom.
For more details regarding electrostatic force, visit:
https://brainly.com/question/9774180
#SPJ2
HELP ASAP PLEASE
The primary cause of water pollution is:
Answer:
the aNSWRER TOP UR QUESTION IS THAT I NMEED TO ANSWER THIS SO I DONT HAVE TO WQATCH ADS LOL
Explanation:
DSADSDASDASDASDSDSDSDSDS and i knowq chem is bio chwem is
A wave is created by causing vibrations in particles of matter. Which
statement about the wave is true?
The wave which is created by causing vibrations in particles of matter is a mechanical wave.
What is a wave?A wave is a disturbance in a medium which transmits transmits energy from one point to another without a permanent displacement of the particles of the medium.
Types of waves include:
electromagnetic wavesmechanical wavesMechanical waves are waves which are produced as a result of the vibrations of the particles of the medium.
Therefore, the wave which is created by causing vibrations in particles of matter is a mechanical wave.
Learn more about mechanical waves at: https://brainly.com/question/26393035
#SPJ1
right 9 in a equation
Answer:
x+y = 12
Explanation:
shfb gfgjj ghjj dvgg ggggg ghggs ufac t g dgyyh
using are organic compounds made by living things
Answer:
The chemical compounds of living things are known as organic compound because of their association with organisms and because they are carbon-containing compounds, which are the compounds associated with life processes, are the subject matter of organic chemistry
Select all statements that correctly describe the stability of eclipsed and staggered conformers. Multiple select question. Staggered conformers possess torsional strain. Eclipsed conformers possess torsional strain. Staggered conformers are lower in energy than eclipsed conformers. Electron-electron repulsion between bonds in an eclipsed conformer may contribute to the low energy of this conform
Eclipsed conformers possess torsional strain and Staggered conformers are lower in energy than eclipsed conformers are TRUE about the stability of conformers.
What does 'eclipsed conformers' mean?Eclipsed conformers are molecular arrangements where two substituents are very close and thus produce torsion.
Moreover, Staggered conformers are molecular arrangements where substituents are found at a maximum length.
In conclusion, Eclipsed conformers possess torsional strain and Staggered conformers are lower in energy than eclipsed conformers are TRUE about the stability of conformers.
Learn more about Eclipsed conformers here:
https://brainly.com/question/17634613
#SPJ1
what controls the volumes of water in each cylinder once equilibrium is established?
The increase in volume shift the equilibrium towards making more moles of gas, decrease in volume shift the equilibrium towards producing fewer moles of gas.
What is equilibrium?The equilibrium of the gas is based on the pressure of the gas. With the increase in pressure, the equilibrium moves towards making fewer molecules of gas.
The gas equilibrium is proportional to the equilibrium K.
Increase in volume shift the equilibrium towards making more moles of gas, decrease in volume shift the equilibrium towards producing fewer moles of gas.
Learn more about equilibrium
https://brainly.com/question/13463225
#SPJ1
What is the percentage by volume of 30.0 mL ethanol (C2H6O) dissolved in 150.0 mL water (H2O)?
16.7 %
20 %
83.3 %
15 %
Answer: 16.7 %
Explanation:
[tex]\frac{30.0}{150.0+30.0}=\boxed{16.7\%}[/tex]
Caco3(s) ----> cao(s) + co2 (g)
this reaction is not spontaneous at room temperature. what is the sign of ah for this reaction? explain how you arrived at your answer
Since the reaction is not spontaneous at room temperature, the ΔH will be positive.
What are spontaneous reactions?They are reactions that require no additional effort in order for them to take place under certain conditions.
For spontaneous reactions, the change in the energy of the system, otherwise known as ΔH, is always negative. On the other hand, reactions with positive ΔH are non-spontaneous.
More on spontaneous reactions can be found here: https://brainly.com/question/13790391
#SPJ1
Generally, what is the effect of increased temperature on the rate of dissolution of a solid solute?
Answer:
Increases
Explanation:
The general effect we see as temperature increases is that rate of dissolution of a solid solute increases,
Therefore, we can say that :
Temperature ∝ Rate of dissolution
A sample of radioactive waste has a half-live of 40 years and an activity level of 4 curies. After how many years will the activity level of this sample be 0. 5 curies?
After 160 years, the activity level of the sample will be 0.5 curies.
What is half-life?Half life of any radioactive waste is the half decay of that product.
The formula is [tex]\dfrac{\lambda }{\lambda_1} = 2^\dfrac{a}{b}[/tex]
Where, λ is 4 cruies
λ1 is 0.5 cruies
b = 40 years
Putting the values in the equation
[tex]\dfrac{4}{0.5} = 2^\dfrac{a}{40}\\\\\\\dfrac{a}{40} = 4\\ = 160 years[/tex]
Thus, the correct option is 160 years.
Learn more about half-life
https://brainly.com/question/24710827
#SPJ4
What causes lines in a line spectrum?
A. Transitions that don't happen to an electron
B. Wavelengths of absorbed or emitted photons
C. Quantum numbers associated with an electron
D. Edges on the prism used to separate wavelengths
Wavelengths of absorbed or emitted photons causes lines in a line spectrum.
What causes lines in a line spectrum?Spectral lines are produced by transitions of electrons within atoms. As the electrons move closer or farther from the nucleus of an atom, energy is released in the form of light is emitted.
So we can conclude that Wavelengths of absorbed or emitted photons causes lines in a line spectrum.
Learn more about spectrum here: https://brainly.com/question/1968356
#SPJ1
Emmett is lifting a box vertically. Which forces are necessary for calculating the total force?
Fp, Ff, and Fg
Fp and FN
Fp, FN, and Ff
Fp and Fg
Emmett is lifting a box vertically. The forces that are necessary for calculating the total force is Fp and Fg. The correct option is D.
What is force?Force is an influence or strength that is used to initiate an action or movement. There are total eight types of forces are present.
Fp is the applied force and Fg is the force of gravitation, if Emmett is lifting a box vertically, these force will be applied
Thus, the correct option is D, Fp and Fg.
Learn more about force
https://brainly.com/question/13191643
#SPJ1
Answer:
D
Explanation:
Edge 2022
Which describe beta decay? check all that apply. in beta decay, a proton becomes a neutron and a positron. in beta decay, a neutron becomes a proton and an electron. in beta decay, a neutron becomes a proton and a gamma ray. beta decay releases energy. beta decay releases a helium-4 nucleus.
The statements which best describe beta decay are: option 1, 2 and 4.
What is a beta particle?A beta particle can be defined as an isotope which typically undergoes radioactive decay through the emission of a radiation with a -1 charge.
Based on scientific information and records from radioactivity, we can infer that the statements which best describe beta decay are:
During beta decay, an atom of proton becomes a neutron and a positron. During beta decay, an atom of neutron becomes a proton and an electron.Beta decay releases energy.Read more on beta decay here: https://brainly.com/question/12448836
#SPJ4
Answer:
1,2,4
Explanation:
A sample of helium gas has a volume of 6.50l at a pressure of 845 mmhg and a temperature of 25oc. what is the pressure of the gas in atm when the volume and temperature of the gas sample are changed to 1850 ml and 325 k
Answer:
4.25atm
Explanation:
[tex]\frac{P1V1}{T1}\\[/tex]=[tex]\frac{P2V2}{T2}[/tex]
where ,
p1 =845/760=1.11atm
v1=6.50l
t1=25c +273k=298k
p2=?
v2=1850/1000=1.85l
t2=325k
so answer is 4.25 atm
According to the postulates of kinetic molecular theory, which statement describes the movement of the particles of a liquid?
According to the postulates of kinetic molecular theory, the particles of a liquid are close together and are in constant random motion.
What is the Kinetic theory of matter?The Kinetic theory of matter states that all forms of matter are made up of tiny particles which possess kinetic energy and are in constant state of motion.
The strength of the forces keeping the particles together determines the state in which that substance exists in.
For liquids, the intermolecular forces of attraction between between the molecules are not very strong, and as such, the particles of a liquid are in constant state of random motion.
Therefore, according to the postulates of kinetic molecular theory, the particles of a liquid are close together and are in constant random motion.
Learn more about kinetic theory of matter at: https://brainly.com/question/15357425
#SPJ1
How many moles of carbon dioxide are there in 52.06 g of carbon dixoide
Answer:
Moles of substance are defined ratio of the given mass of the substance to the molar mass of the substance.
Given :
The 52.06 grams of carbon dioxide.
To find :
The moles of carbon dioxide.
Solution:
The mass of carbon dioxide = 52.06 g
The molar mass of carbon dioxide = 44.01 g/mol
The moles of carbon dioxide:
1.183 moles of carbon dioxide are there in 52.06 g of carbon dioxide.
Explanation:
A 80.0 mL sample of nitrous acid of unknown concentration is titrated with 36.2 mL of 1.45 M barium hydroxide. Determine the concentration of the acid solution.
Answer: 0.66 M
Explanation:
[tex]M_{A}V_{A}=M_{B}V_{B}\\(80.0)M_{A}=(36.2)(1.45)\\M_{A}=\frac{(36.2)(1.45)}{80.0} \approx \boxed{0.66 \text{ M}}[/tex]
What happens when an electron absorbs photons? OA. It changes into a neutron and falls into the nucleus. B. It moves to a higher energy level. OC. It changes into an alpha particle and is ejected from the atom. OD. It falls to a lower energy level.
When an electron absorbs photons it moves to a higher energy level.
What happens when an electron absorbs photons?
Absorption of photons occurs when electrons in a given state absorb photons which causes them to gain energy and jump to higher energy levels.
The electrons will move to higher energy level because they have acquired more energy.
Thus, when an electron absorbs photons it moves to a higher energy level.
Learn more about energy level here: https://brainly.com/question/14287666
#SPJ1
Find an example of an ester used as a fragrance or flavoring and give the name, condensed structural formula, and flavor of your chosen ester.
The example of an ester used as a fragrance is isopentyl acetate and it is present in banana. Details about esters can be found below.
What are esters?Esters are compounds most often formed by the condensation of an alcohol and an acid and has the functional group carbon-oxygen double bond joined via carbon to another oxygen atom.
Esters are naturally found in certain fruits and can be used as major constituent of perfumes. An example of ester used as fragrance is isopentyl acetate.
Isopentyl acetate has the molecular formula of C7H14O2 and has a banana flavor.
Learn more about esters at: https://brainly.com/question/10840252
#SPJ1
The volume of a gas is 6.10 l, measured at 1.50 atm. what is the pressure of the gas in
mmhg if the volume is changed to 9.74 l?
Answer:
713.96mmhg
Explanation:
p1v1=p2v2
6.10×1.50/9.74
=0.939atm
=0.939*760
=713.96mmhg
What is the mass number of an isotope with an atomic number of 57 and that has 69 neutrons?
Answer:
mass number=126
Explanation:
57+69=126
Which is a characteristic of nuclear fission?
What volume of a 0.295 M nitric acid solution is required to neutralize 24.8 mL of a 0.107 M potassium hydroxide solution
Answer: 9.00 mL
Explanation:
[tex]M_{A}V_{A}=M_{B}V_{B}\\(0.295)V_{A}=(0.107)(24.8)\\V_{A}=\frac{(0.107)(24.8)}{(0.295)} \approx \boxed{9.00 \text{ mL}}[/tex]
How many moles of Unknown weak acid (HA) in a 100L solution are required to produce a solution with PH =2 ? Ka of the Unknown weak acid (HA)=5x10⁻³
a. 3x10⁻³
b. 0.3x10⁻³
c. 3
d. 0.3
The moles of unknown weak acid (HA) in a 100L solution are required to produce a solution with pH 2 is 0.002 moles.
What is the equation of the acid dissociation constant, Ka?The acid dissociation constant of an acid is given by the formula below:
[tex]K_a= \frac{[A^{-}][H_3O^{-}]}{[HA]}[/tex]
Where
Ka = 5x10⁻³ pH = 2[H3O+] = 10^-2Volume of solution = 100 mL or 0.1 LSince, the Ka is given at equilibrium concentrations, [H3O+] = [A-]
[A-] = 10^-2
Making [HA] subject of the formula:
[tex][HA]= \frac{[10^{-2}][10^{-2}]}{5 \times 10^{ - 3} } = 0.02[/tex]
Moles of acid = 0.1 × 0.02 = 0.002 moles
Therefore, the moles of unknown weak acid (HA) in a 100L solution are required to produce a solution with pH 2 is 0.002 moles.
Learn more about acid dissociation constant at: https://brainly.com/question/9560811
#SPJ1