Identify the solutions among the following mixtures
Soil, Sea water, Air, Coal, Soda water
Answer:
Out of the above mixtures, seawater, air, and soda water are solutions.
hope this helps :3
PLS I WILL GIVE BRAINLY How do the number of violence electrons of the light metals compared to those heavier than boron
The valence electron of the light metals are all in the range of 1 to 3.
What are Valence electron ?Valence Electron is the number of electrons in the outer shell of an atom which participate in bond formation.
Number of Valence Electron in Boron is 3 and other light metals lighter than Boron have 1 , 2 of Lithium and Beryllium respectively,
The valence electron of the light metals are all in the range of 1 to 3.
To know more about Valence Electron
https://brainly.com/question/12717954
#SPJ1
One atomic mass unit ( 1 amu)
is equal to the mass of a carbon-12 atom multiplied by the quantity
Answer: 1/12
Explanation:
A carbon-12 atom has a mass of 12 amu, so multiplying this by 1/12, we get 1 amu.
ANS THIS SMALL QUESTION
Compare the temperature change for cold sand and cold water when the same amount of hot water was added. what do you discover?
When the same amount of heat is added to cold sand and cold water, the temperature change of sand will be higher because of its lower specific heat capacity.
What is specific heat capacity?Specific heat capacity is the quantity of heat required to raise a unit mass of a substance by 1 kelvin.
Specific heat capacity of water and sandWater, c = 4,200 J/kg⁰C
Sand, c = 830 J/kg⁰C
Q = mcΔθ
where;
Δθ is temperature changeQ is quantity of heat addedΔθ = Q/mc
Thus, for an equal mass of water and sand, when the same amount of heat is added to cold sand and cold water, the temperature change of sand will be higher because of its lower specific heat capacity.
Learn more about specific heat capacity here: https://brainly.com/question/21406849
#SPJ1
Answer:t
Explanation:
If the pressure starts at 36 Kia what is the final pressure
answer:
is Well-Known Member. For a 35" you should be in the 28-32 range on road.
Explanation:
your welcome make brainlist
What is the volume of a gas if 0.182 moles of the gas is at 1.99 atm and 83.4oC?
[tex]\text{Given that,}\\\\\text{Pressure,}~ P = 1.99~ \text{atm}\\ \\\text{No. of moles,}~ n = 0.182~ \text{mol.}\\\\\text{Temperature,}~ T = 83.4^{\circ}~ C = 356.4~K\\\\ \text{Molar gas constant,}~ R = 0.082~ \text{L}~ \text{atm}~ \text{mol}^{-1}~ \text{K}^{-1}\\\\\text{Volume,}~ V =?\\\\\text{We know that,}~\\\\~~~~~~~PV =nRT\\\\\implies V = \dfrac{nRT}{P}\\\\\\~~~~~~~~~~=\dfrac{0.182 \times0.082 \times 356.4 }{1.99}\\\\\\~~~~~~~~~~\approx 2.68~ \text{L.}\\\\\\[/tex]
[tex]\text{Hence the volume of the gas is 2.68 L.}[/tex]
2.68L is the volume of a gas if 0.182 moles of the gas is at 1.99 atm and 83.4°C.
What is volume?A measurement of three-dimensional space is volume. It is frequently expressed quantitatively using SI-derived units, as well as several imperial or US-standard units. Volume and the notion of length are connected. In contrast to how much space the container actually occupies, the size of a container is typically thought of as its capacity, or the quantity of liquid it could hold.
Volume was initially measured using naturally occurring vessels of a comparable shape and then with standardised containers. Arithmetic formulas can be used to quickly calculate the volume of several straightforward three-dimensional shapes. If a formula again for shape's boundary is known, it is possible to use integral calculus to determine the volumes of more complex shapes.
P×V = n×R×T
V=n×R×T /P
=0.182 ×0.082×356.4 /1.99
=2.68L
Therefore, 2.68L is the volume of a gas if 0.182 moles of the gas is at 1.99 atm and 83.4°C.
To know more about volume, here:
https://brainly.com/question/23477586
#SPJ2
Based on Charles's law, which of the following statements is true for an ideal gas at a constant pressure and mole amount?
The number of collisions is independent of volume.
The number of collisions decreases with increase in volume.
Volume is directly proportional to absolute temperature.
Volume is inversely proportional to absolute temperature.
Answer:
the number of collisions is independent of Volume.
Based on Charles's law, an ideal gas at a constant pressure and mole amount is " the number of collisions is independent of volume."
What is Charles's law?Gases have a propensity to expand while heated, according to Charles' law, an innovative gas law.
What is collisions?A collision would be any situation in where two or even more bodies quickly number of factors on one another.
Based on Charles's law, an ideal gas at a constant pressure and mole amount is " the number of collisions is independent of volume."
Therefore, the correct answer will be option (A).
To know more about collisions and Charles's law
https://brainly.com/question/16927784
#SPJ3
(i) Give the two dyes that are mixed to make brown hair dye.
Answer:
green n yellow and white and black and white sq
what is the answer and why?
Answer:
D
Explanation:
There are 2 oxygens on the reactants side (OH)2 but 4 on the products side (2H2O). You cannot get 2 oxygens out of nowhere, so it is not balanced.
density is ______ to pressure
Answer:
When pressure increases, density increases.
When the pressure decreases, density decreases.
When density increases, pressure increases.
When density decreases, the pressure decreases.
Explanation:
if energy can neither be created nor destroyed, into what kinds of energy have these resources been transformed?
Answer:
Heat, Sound
Explanation:
I am pretty sure you are addressing mechanical energy and machine efficiency. So you are probably aware a machine can't achieve 100% efficiency because of the first and second laws of thermodynamics. This energy is lost to friction and air resistance. They convert some gravitational potential energy to heat and sound energy rather than all to kinetic energy, and vice versa.
A solution of potassium nitrate is made when potassium nitrate dissolves in water.
Describe a method you could use to obtain crystals of potassium nitrate from
potassium nitrate solution.
You should include an explanation of the process by which the crystals are produced
from the solution.
[6 marks]
Answer:
Boil the water and stir in potassium nitrate. If it doesn't all dissolve, you can cook it on the stove or microwave it until the water boils again. Remove the solution from heat, but let it cool slowly for the best crystal formation.
Based on table n, uranium-238 and uranium-235 have different
a)decay modes
b)half lives
c)number of protons
d)number of electrons
According to table N, the isotopes uranium-238 and uranium-235 have different half lives.
What are radioactive nuclides?Radioactive nuclides are those nuclides that are able to undergo radioactive decay. They have specific modes of decay that is peculiar to each isotope.
Hence, according to table N, the isotopes uranium-238 and uranium-235 have different half lives.
Learn more about uranium-238:https://brainly.com/question/9099776
#SPJ1
Having problems figuring out molar mass in general. steps would be most appreciated.
Answer:
The periodic table
Explanation:
As you can see in the screenshot. Each element on the periodic table has an atomic number and a mass number. The atomic numbers are arranged in numerical order from right to left in the periodic table. The second number there is the atomic mass.
When doing stoichiometric ratios, you need to use the atomic mass of each element to determine the molecular/molar mass.
example. Find the molar mass of
H₂SO₄
Hydrogen (2) + sulphur (1) +oxygen (4)
= atomic mass of H(2)+ atomic mass S(1)+ atomic mass oxygen(4)
=1(2) + 32(1)+16(4)
=2+32+64
=98
N.B We do not use the co-efficient when looking for molar mass, we only use the atom and subscript
Match the phase to the correct definition.
1.
Anaphase
2.
Prophase
3.
Metaphase
4.
Telophase
a.
Chromosomes line up at the center of the cell.
b.
The DNA is organized into connected rods called chromosomes.
c.
New cells begin to form.
d.
The chromosomes are separated and move to opposite sides of the cell.
Answer:
1.) Anaphase ------> D.) The chromosomes are separated and move to opposite sides of the cell.
2.) Prophase -------> B.) The DNA is organized into connected rods called chromosomes.
3.) Metaphase -------> A.) Chromosomes line up at the center of the cell.
4.) Telophase ------> C.) New cells begin to form.
What differences do you notice when you heat up the brick and the iron at same temperature?
After heating the brick and the iron, it is observed that the brick heats up quicker and the brick releases energy quicker.
What is thermal energy?Thermal energy (also called heat energy) is produced when a rise in temperature causes atoms and molecules to move faster and collide with each other.
The iron has more energy than the brick even though it is at the same temperature. That means that the iron must have more particles than the brick.
Iron and brick are both solids and have the same volume, so the difference in total energy must be due to atomic composition.
Learn more about thermal energy here:
https://brainly.com/question/14506133
#SPJ1
A gas cylinder contains exactly 1 mole of oxygen gas (O2). How many molecules of oxygen are in the cylinder?
The number of molecules of oxygen in the cylinder is 6.02×1023 molecules
Data obtained from the question
Number of mole of oxygen = 1 mole
Number of molecule of oxygen =?
From Avogadro's hypothesis, we understood that 1 mole of any substance contains 6.02×1023 molecules. This implies that 1 mole of oxygen contains 6.02×1023 molecules.
Since the cylinder contains 1 mole of oxygen, then the number of molecules of oxygen present in the cylinder is 6.02×1023 molecules.
Which refers specifically to a heated solution that holds more dissolved solution than it can hold at a lower temperature?.
Answer:
Supersaturated solution
Explanation:
Weren't there any options?
Anyways, the best I can think of right now is a supersaturated solution.
Check Your Learning
What mass of CO is required to react with 25.13 g of Fe2O3
according to the equation Fe₂O3 + 3 CO2 Fe + 3CO₂?
Answer:
convert the 25.13 g of Fe2O3 into moles by dividing by its molar mass (159.69) to get that. When looking at the stoichiometric coefficients, we can see that for every 1 mole of Fe2O3, there needs to be 3 moles of CO.
Explanation:
The elaboration likelihood model emphasizes the use of __________ persuasion and __________ persuasion methods. a. direct . . . elaborative b. peripheral . . . elaborative c. direct . . . peripheral d. indirect . . . direct
The elaboration likelihood model emphasizes the use of direct persuasion and peripheral persuasion methods.
What is direct persuasion and peripheral persuasion?
This theory involves a dual process which explains how attitudes are changed in individuals through persuasion.
These methods help in the formation of attitude which makes, in this case, option use of direct persuasion and peripheral persuasion.
See more about persuasion at brainly.com/question/25799066
#SPJ4
Answer:
C. direct . . . peripheral
Explanation:
Because I said so.
How do you know which element the little number (subscript) goes with?
Answer:
you will not
Explanation:
the little subscript number just indicates how many of a certain atom is in a molecule... example H₂O... that little ₂ means that there are 2 hydrogen atoms in the water molecule.
there is an invisible ₁ on the O as well. H₂O₁ shows there is one oxygen atom in the water molecule, but we do not show the 1
Answer:
The little number you see to the right of the symbol for an element is called a subscript. That number indicates the number of atoms of that element present in the compound. When balancing an equation, you can change the coefficients but not the subscripts.
Name all these please I need help. Write the names of the fallowing accoring to the IUPAC rules.
#1
You used red pen highlight which made things messier
The correct name should be.
9-methyl dec-1,2-dieneAs a methyl group attached with 9th carbon
#2
methyl group at 4
double bond at 2
4-Methyl Pent-2-ene#3
Three methyl groups are present
Double bond at 2
2,5,5-Trimethyl Hex-2-ene#4
2,5-Dimethyl Hept-3,5-diene#5
2,5-Dimethyl Hex-3-ene
Write the balanced equations for the following nuclear reactions.
ASAPPP
[tex]^{233}_{92}U\;\rightarrow\;^4_{2}He\;+\;^{229}_{90}Th[/tex] is the balanced equations for the following nuclear reactions.
What are balanced equations?A balanced equation is an equation for a chemical reaction in which the number of atoms for each element in the reaction and the total charge is the same for both the reactants and the products
Uranium-233 is produced by the neutron irradiation of thorium-232. When thorium-232 absorbs a neutron, it becomes thorium-233, which has a half-life of only 22 minutes.
Hence, [tex]^{233}_{92}U\;\rightarrow\;^4_{2}He\;+\;^{229}_{90}Th[/tex] is the balanced equations for the following nuclear reactions.
Learn more about the balanced equations here:
https://brainly.com/question/12192253
#SPJ1
How many atoms are in 3.2 moles of N2
Answer:
38.54 x 10^23 atoms of N2
Explanation:
Each mole contains Avagadro's Number ( 6.022 x10^23) of particles
3.2 x 6.022 x 10^23 = 19.27 x 10^23 MOLECULES
N2 is TWO atoms soooo 2 x 19.27 x 10^23 = 38.54 x 10^23 atoms
What is the volume of a sample of mercury, a liquid metal, if it has a density of 14 g/ml and a mass of 28 g?
a student used a vernier magnetic field sensor to measure the strength of the magnetic field generated by a bar magnet. at which position is the
strength of the magnetic field strongest point a or point b?
The position is the strength of the magnetic field strongest is is the place where the magnetic field leaves, being point A.
What generates a magnetic field?When an electrically charged particle moves, it creates a magnetic field. According to the laws of electromagnetism, this magnetic field originates from the variation of the electric field strength.
In the region of the poles we see that the lines of magnetic induction are closer to each other, therefore, we consider that close to the poles the magnetic field is more intense.
See more about magentic field at brainly.com/question/14848188
#SPJ1
How many moles of na contain 7.88x1021 atoms of na
Answer:
the answer to the qustion is 0.013089701 na
Explanation:
n/a
How does engineering affect the amount of human labor needed to harvest rice?
Answer:
Yes
Explanation:
The first step of harvesting is draining the paddy. Next, farmers cut the plants -- with a scythe or sickle if by hand -- and transport them elsewhere to be laid out and dried for two or three days. Rice can be cut by hand or machine. In the developed world, harvesting by hand is still very common.
What kind of scientist would study how mistletoe harms trees
Answer:
A Dendrologist! They are the type of Scientist that studie trees.