will give brainliest and 10 points
what are 5 good wood working projects that are easy.
Answer:
a bowl, plate,
Explanation:
37. WHICH OF THESE STATEMENTS IS TRUE ABOUT KEEPING CHILDREN SAFE IN
VEHICLES?
A. Infants should not ride in the front seat of vehicles
B. Children under one year and over 20 lbs. should ride buckled up in the front seat
C. The back seat is generally not the safest place in the car for all children 12 years and younger
A
It would be B but I say that it isn't because children under 3 should be riding a buckle up just for safety
Which device can connect many computers and sends packets out every port?
A device that can connect many computers and sends packets out of every port is known as Hub.
What is the name of a device that usually connects many computers?The name of the device that usually connects many computers is known as a hub. It typically connects multiple computer networking devices together. It also acts as a repeater in that it amplifies signals that worsen after traveling long distances over connecting cables.
According to the context of this question, a hub usually connects multiple computers together in a Local Area Network (LAN). All types of information are generally processed or sent to the hub is then sent through each port to every device in the network. It is noted that all types of devices are definitely connected to a network hub and share all available bandwidth equally.
Therefore, a device that can connect many computers and sends packets out of every port is known as Hub.
To learn more about Network connections, refer to the link:
https://brainly.com/question/30408134
#SPJ3
Select the correct text in the passage.
Identify which of the following sentences describes the working of a piezoelectric gauge.
Answer:
The gauge converts the charge into a measurable electrical signal.
Explanation:
trust me
Tea brewed for iced tea should never be held for more than which of the following time periods?
1 hour
4 hours
8 hours
12 hours
If you are unsure about holding a piece of wood to be drilled, then you should always use a
to secure the place while a.drilling,
B.Clamp
C.farger drill bit
D.Smallor drill bit
E.Awl
Which is the maximum length for any opening on the surface of a 2G SMAW guided bend test specimen?
O 1/3 inch
O 1/4 inch
O 1/8 inch
O 1/2 inch
Answer:
1/8 is the maximum length for opening any on the surface of 2 gtam guided bend test specimen
A group of engineers meets with a local farm cooperative to discuss features of a new fertilizer. What stage of the product development life cycle is this?
detailed product design
concept development
product planning
product systems design
Answer:
i think it is concept development
Explanation:
An organization sets its standards for quality according to the best product it can produce.
True
False
Answer:
True!! took the test
Explanation:
All of the following are ways to help locate a coolant leak source except?
Dye test
Scan tool
Visual inspection
Pressure test
Answer:
Scan tool
Explanation:
pressure testing is the best way of testing for a colant leak
a scan tool literally does nothing for a coolant leak
The one end of a hollow square bar whose side is (10.01) in with (1.01) in thickness is under a tensile stress 102,500 psi and the other end is connected with a U bracket using a double-pin system. Find the minimum diameter of pin is used according to shear strength. Take the factor of safety as 1.5 and σ_all=243 ksi for pin material.
Answer:
The one end of a hollow square bar whose side is (10+N/100) in with (1+N/100) in thickness is under a tensile stress 102,500 psi and the other end is connected with a U bracket using a double-pin system. Find the minimum diameter of pin is used according to shear strength. Take the factor of safety as 1.5 and σ_all=243 ksi for pin material.
Explanation:
A transmission channel between two communicating DTEs is made up of three sections. The first introduces an attenuation of 16 dB, the second introduces an amplification of 20 dB, and the third introduces an attenuation of 10 dB. Assuming a mean transmitted power level of 400 mW, determine the mean output power level of the channel. (3 points)
Answer:
the mean output power level of the channel is 100.475 mW
Explanation:
Given the data in the question;
for the first section; attenuation
16 = 10log₁₀ 400/P₂
P₂ = 10.0475 mW
For the second section; amplification
20 = 10log₁₀ p₂/10.0475
p₂ = 1004.75 mW
For the third section; attenuation
10 = 10log₁₀ p₂/1004.75
p₂ = 100.475 mW
i.e the mean output power level is 100.475 mW
or better still overall attenuation channel = ( 16 - 20) + 10 = 6dB
so
6 = 10log₁₀ 400/P₂
p₂ = 100.475 mV
the mean output power level of the channel is 100.475 mW
People with skills and training in areas such as marketing or accounting are an important part of the manufacturing industry.
True
False
Answer:
true
Explanation: