Answer:
11.6 mol O₂
Explanation:
C₇H₁₆ + 11 O₂ → 7 CO₂ + 8 H₂OIn order to solve this problem we need to convert moles of carbon dioxide (CO₂) into moles of oxygen gas (O₂). To do so we'll use a conversion factor containing the stoichiometric coefficients of the balanced reaction:
7.4 mol CO₂ * [tex]\frac{11molO_2}{7molCO_2}[/tex] = 11.6 mol O₂g A student determines the number of moles of water in a hydrated metal oxide by weighing a clean, dry crucible and lid while the crucible is empty, then reweighing the crucible and lid with a sample of the hydrate, heating the crucible and lid with a Bunsen burner and then reweighing the crucible and lid with the sample after cooling to room temperature. Which error will result in too high a value for the amount of water of hydration
The question is incomplete, the complete question is;
A student determines the number of moles of water in a
hydrated metal oxide by weighing a clean, dry crucible
and lid while the crucible is empty, then reweighing the
crucible and lid with a sample of the hydrate, heating the
crucible and lid with a Bunsen burner and then
reweighing the crucible and lid with the sample after
cooling to room temperature. Which error will result in
too high a value for the amount of water of hydration?
(A) The heating is conducted only once instead of the
three times recommended by the procedure.
(B) The lid is left off the crucible when it is weighed
with the hydrated oxide.
(C) The metal oxide reacts partially with oxygen in the
air, forming a compound in a higher oxidation state.
(D) Some of the heated oxide is spilled from the crucible
before it can be weighed.
Answer:
(D) Some of the heated oxide is spilled from the crucible
before it can be weighed.
Explanation:
It is possible to determine the number of moles of water in a hydrated metal oxide by weighing a clean, dry crucible and lid while the crucible is empty, then reweighing the crucible and lid with a sample of the hydrate. The crucible and lid with the sample are heated, cooled and reweighed.
As this process is going on, suppose some of the heated oxide is spilled from the crucible, then the mass of heated or anhydrous oxide decreases leading to a consequent increase in the number of moles of water in the hydrated metal oxide, hence the answer above.
The too high a value for the amount of water of hydration error is occur due to heating of given hydrated sample.
What is hydrated compounds?
Hydrated compounds are those compounds in which water molecule is present with the normal compound.
To get the correct value of weight of hydrated compound, first we have to weigh the empty crucible and lid and then with sample of compound in the crucible and lid. After this substract empty weigh of crucible & lid from the sample-crucible-lid weigh. If we substract the weigh from heated sample crucible and lid, then we get the error because the hydrated water molecule may decompose due to heating and moles of water increases.
Hence, error will occur if we heat the sample.
To know more about hydrated compound, visit the below link:
https://brainly.com/question/16275027
(a) Define the following terms
(i) Periodic Table
(ii) Period on the Periodic-table
(iii)Colum on the Periodic-Table
Explanation:
i.Periodic table:It is a chart or table of the elements arranged into columns and rows according to their physical and chemical properties.
ii.Period on the periodic table:The horizontal rows of elements
iii.Column on the periodic table:The vertical representation of elements
You have a cold gas of atoms, and you observe that if you shine light consisting of photons with energy 10 eV through the gas, some free electrons are observed, implying that a photon of this energy is able to ionize an atom in the gas. (a) If you find that the emitted electrons from the gas have a kinetic energy of 1 eV, what is the ionization energy of the cold atom
Answer:
Ionization Energy = 9 eV
Explanation:
If we apply the law of conservation of energy to the given situation, we will get the following equation:
[tex]Energy\ of\ Photon = Ionization\ Energy + Kinetic\ Energy\ of\ Electron\\[/tex]
where,
Energy of Photon = 10 eV
Ionization Energy = ?
Kinetic Energy of Electrons = 1 eV
Therefore,
[tex]10\ eV = Ionization\ Energy + 1\ eV\\Ionization\ Energy = 10\ eV - 1\ eV[/tex]
Ionization Energy = 9 eV
What will change more solid NiCl2 is added
If I had 3.50 x 10 24molecules of Cl2 gas, how many grams is this?
Answer:
412 g Cl₂
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableMolesAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Stoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
[Given] 3.50 × 10²⁴ molecules Cl₂
[Solve] grams Cl₂
Step 2: Identify Conversions
Avogadro's Number
[PT] Molar Mass of Cl - 35.45 g/mol
Molar Mass of Cl₂ - 2(35.45) = 70.9 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 3.50 \cdot 10^{24} \ molecules \ Cl_2(\frac{1 \ mol \ Cl_2}{6.022 \cdot 10^{23} \ molecules \ Cl_2})(\frac{70.9 \ g \ Cl_2}{1 \ mol \ Cl_2})[/tex][DA] Divide/Multiply [Cancel out units]: [tex]\displaystyle 412.072 \ g \ Cl_2[/tex]Step 4: Check
Follow sig fig rules and round. We are given 3 sig figs.
412.072 g Cl₂ ≈ 412 g Cl₂
I need to know what the question is asking please help
Answer: What events create the heaviest elements?
I would Select:
Neutron Star Collissions
Supernova
Why is it important to make sure that the endpoint is noted accurately in titration?
Select the correct answer.
What is the molecularity of this elementary step?
A+ A+B-->C+D
A.
unimolecular
B.
bimolecular
c.
trimolecular
D.
tetramolecular
Answer: C not really sure thoo
Terry, a student, performs a titration. He completes these steps as part of his titration procedure: 1. He cleans and rinses a burette with standardized base. 2. He fills the burette with standardized base solution. 3. He reads and records the initial burette volume. 4. He adds a base from the burette to an acid. 5. He observes a color change in the Erlenmeyer flask. 6. He stops the addition of base from the burette. 7. He reads and records the final burette volume. Which steps will provide information needed to calculate the volume of base needed to reach the equivalence point? A. 1 and 6 B. 3 and 7 C. 3, 4, and 6 D. 1, 2, and 7
Answer:
D
Explanation:
D is the answer because 2 is needed to know
Answer:
B) 3 and 7
Explanation:
i just took the test
Limestone has a density of 2.72 g/cm3. What is the mass of 8.92 cm3 of limestone?
Answer:
[tex]\boxed {\boxed {\sf 24.2624 \ g}}}[/tex]
Explanation:
Density measures mass per volume. The volume is
[tex]\rho=\frac{m}{v}[/tex]
The density of limestone is 2.72 grams per cubic centimeter. We have a piece of limestone with a volume of 8.92 cubic centimeters.
ρ= 2.72 g/cm³v= 8.92 cm₃Substitute the values into the formula.
[tex]2.72 \ g/cm^3=\frac{m}{8.92 \ cm^3}[/tex]
Now we solve for m, the mass, by isolating the variable.
m is being divided by 8.92 cubic centimeters. The inverse of division is multiplication, so we multiply both sides by 8.92 cubic centimeters.
[tex]8.92 \ cm^3 * 2.72 \ g/cm^3=\frac{m}{8.92 \ cm^3}* 8.92 \ cm^2[/tex]
[tex]8.92 \ cm^3 * 2.72 \ g/cm^3=m[/tex]
The units of cubic centimeters cancel out.
[tex]24.2624 \ g =m[/tex]
The mass of this piece of limestone is 24.2624 grams.
A 3mL sample of a 200 Molar solution is left open on a lab
counter for two weeks, after which the concentration of the solution is 6 M. What is the new volume of the solution?
Answer: New volume of the solution is 100 mL.
Explanation:
Given: [tex]V_{1}[/tex] = 3 mL, [tex]M_{1}[/tex] = 200 M
[tex]M_{2}[/tex] = 6 M, [tex]V_2[/tex] = ?
Formula used to calculate the new volume of solution is as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]
Substitute the values into above formula as follows.
[tex]M_{1}V_{1} = M_{2}V_{2}\\200 M \times 3 mL = 6 M \times V_{2}\\V_{2} = \frac{200 M \times 3 mL}{6 M}\\= 100 mL[/tex]
Thus, we can conclude that new volume of the solution is 100 mL.
A chemistry student heated 2.255 g of oxygen gas in the presence of 5.145
Answer:
a
Explanation:
what happens to gas molecules as the pressure is increased while the temperature and volume of the container remain constant according to the kinetic molecular theory
Answer:
According to the kinetic molecular theory of gases, the average speed and kinetic energy of gas molecules would INCREASE.
Explanation:
In the kinetic molecular theory of gases, assumptions were made based on macroscopic properties of gas (pressure, volume and temperature) which are as a result of the microscopic properties like the position and the speed of the gas molecules. The kinetic molecular theory explains the behaviour of gases through the following 5 assumptions made about an ideal gas;
--> Molecules of a gas are in constant and rapid motion in straight lines until they collide with one another and with the walls of their containers.
--> The actual volume occupied by the had is negligible compared with the volume of the container.
--> Forces of attraction or repulsion between the molecules of a gas are negligible
--> The collision between the molecules is perfectly elastic.
--> The average kinetic energy of the gas molecules is proportional to the temperature of the gas.
Because gas molecules are in constant motion, it has kinetic energy which can be altered when there is increase in pressure. An increase in pressure will cause gas molecules to collide more frequently with one another. This in turn leads to increase in average speed and the kinetic energy of the individual molecules.
where do you think water vapor in air comes from?
What is the Same about carbohydrates, proteins , and fats ?
Answer:
The main similarity between carbohydrates, proteins and fats is that they are all used for energy.
Explanation:
I hope this helps, have a blessed day.
Pls help ASAP it’s timing meeee!!!!!
One way to measure ionization energies is ultraviolet photoelectron spectroscopy (UPS, or just PES), a technique based on the photoelectric effect. In PES, monochromatic light is directed onto a sample, causing electrons to be emitted. The kinetic energy of the emitted electrons is measured. The difference between the energy of the photons and the kinetic energy of the electrons corresponds to the energy needed to remove the electrons (that is, the ionization energy). Suppose that a PES experiment is performed in which mercury vapor is irradiated with ultraviolet light of wavelength 58.4 nm.
(a) What is the energy of a photon of this light in eV?
(b) Write an equation that shows the process corresponding to the first ionization energy of Hg.
(c) The kinetic energy of the emitted electrons is measured to be 10.75 eV. What is the first ionization energy of Hg in kJ/mol?
Answer:
Explanation:
From the given information:
The energy of photons can be determined by using the formula:
[tex]E = \dfrac{hc}{\lambda}[/tex]
where;
planck's constant (h) = [tex]6.63 \times 10^ {-34}[/tex]
speed oflight (c) = [tex]3.0 \times 10^8 \ m/s[/tex]
wavelength λ = 58.4 nm
[tex]E = \dfrac{6.63 \times 10^{-34} \ J.s \times 3.0 \times 10^8 \ m/s}{58.4 \times 10^{-9 } \ m}[/tex]
[tex]E =0.34 \times 10^{-17} \ J[/tex]
[tex]E = 3.40 \times 10^{-18 } \ J[/tex]
To convert the energy of photon to (eV), we have:
[tex]1 eV = 1.602 \times 10^{-19} \ J[/tex]
Hence
[tex]3.40 \times 10^{-18 } \ J = \dfrac{1 eV}{1.602 \times 10^{-19 } \ J }\times 3.40 \times 10^{-18 } \ J[/tex]
[tex]E = 2.12 \times 10 \ eV[/tex]
E = 21.2 eV
b)
The equation that illustrates the process relating to the first ionization is:
[tex]Hg_{(g)} \to Hg^+ _{(g)} + e^-[/tex]
c)
The 1st ionization energy (I.E) of Hg can be calculated as follows:
Recall that:
I.E = Initial energy - Kinetic Energy
I₁ (eV) = 21.2 eV - 10.75 eV
I₁ (eV) = 10.45 eV
Since ;
[tex]1 eV = 1.602 \times 10^{-19} \ J[/tex]
∴
[tex]10.45 \ eV = \dfrac{1.602 \times 10^{-19 } \ J }{ 1 \ eV}\times 10.45 \ eV[/tex]
Hence; the 1st ionization energy of Hg atom = [tex]1.67 \times 10^{-18} \ J[/tex]
[tex]1.67 \times 10^{-21} \ kJ[/tex]
Finally;
[tex]I_1 \ of \ the \ Hg (kJ/mol) = \dfrac{1.67 \times 10^{-21 \ kJ} \times 6.02 \times 10^{23} \ Hg \ atom }{1 \ Kg \ atom }[/tex]
[tex]\mathbf{= 1.005 \times 10^3 \ kJ/mol}[/tex]
What is the energy of a photon?
A. A photon has no energy.
B. The energy of a photon is hxc.
c. The energy of a photon is hx 2.
D. The energy of a photon is h* f.
a. Explain why the pie pans flew off the van de Graaf generator
b. Give a detailed explanation of why the rabbit fur and the plastic rod were attracted to each other after we rubbed them together but not before
c. Describe two things you could change to increase the force of electrical attraction between two objects (this is about Coluomb's Law).
Answer:
Static energy is an energy between two charges.
Explanation:
a). A van de Graff generator builds up a positive electric charge on the dome by separating the negative static electric charges from the positive static charge using a quickly moving belt. The positive charge collects on the large metal dome of the generator. When the charge builds up is large enough, a lighting like spark can shoot from the dome to a grounded discharge rod.
Like electric charges always repel each other, and oppositely electric charges will attract each other. When the aluminum pans are being charged by the van de Graff generator, then each of them attain the same positive polarity similar with the dome. Thus, positive charge starts to accumulate over the surface of each of the pie pan. Each aluminum pan repels the others. These repulsive forces between the pans are so strong that they succeed in overcoming the gravity force and thus the top of the pan is pushed away from the generator's dome.
b). Static electricity is produced by a concentration of negative and positive electric charges. Like charges pushes away each other while unlike charges pulls each other.
Objects generally have same numbers of positive charges as well as negative charges. And if there is any small imbalance in numbers of the charges on the object, it is charged.
Negative charges easily torn away from the materials like the fur or hair. Also, the negative charges are held on other materials like the plastics. If we rub a plastic rod with fur, the negative charges will get transferred from fur to rod. The rod gets negatively charged and the fur is positively charged. As a result, the rabbit fur and the plastic rod were attracted to each other.
c). Coulomb's law stated that :
[tex]$F=\frac{KQ_1Q_2}{d^2}$[/tex] .............(i)
where, [tex]$Q_1$[/tex] and [tex]$Q_2$[/tex] are the charges of two objects d is the distance between two objects.
As from the above equation, we can say that force of electrical attraction between two objects depends on the charges and the distance between objects.
1. The electrical force between two charged object is inversely proportional to the distance of separation between two objects.
Decreasing separation distance (d) between the objects will increase its attraction force.
2. And, increasing the charges of two objects(+ve and -ve) increases the force of attraction between two objects.
How many Liters are in 98.2 moles of neon?
Answer:
2200 L
Explanation:
There are 22.4 L in 1 mole of neon so if you have 98.2 L, then you have 98.2 mole x (22.4 L/mole) = 2200 L of neon.
Give the name of the products
formed
between Benzene and the following Compounds
Br2,Cl2,HNO3,H2SO4,HCOCl
1-chlore-2,2-dimethylpropane
Answer:
With Br2 - Bromobenzene
With Cl2 - Chlorobenzene
With HNO3- Nitrobenzene
With H2SO4 - Benzenesulphonic acid
With HCOCl - Benzoyl chloride
With 1-chloro-2,2-dimethylpropane - 2,2dimethyl-1-phenyl propane
Explanation:
All the reactions listed above are electrophillic reactions. They are electrophillic reactions because the attacking agents in each reagent is an electrophile. An electrophile means any specie that is electron deficient and attacks regions of high electron density in molecules.
The benzene molecule has rich electron density. Substituents that are electron pushing increases the tendency of benzene to undergo electrophillic substitution reactions while electron withdrawing substituents decrease the the tendency of benzene to undergo electrophillic substitution reactions.
The names of the compounds formed when benzene undergoes electrophillic reaction with different attacking agents have been listed in the answer section.
करताह!
गर्मियों में घड़े का जल ठंडा क्यों होता है?
Answer:
I don't understand the question
Explanation:
what is your name
The pressure on 200 milliliters of a gas at constant
temperature is changed from 380 torr to 760 torr. The new
volume of the gas is
answerA) 100 mL
Explanation:
At constant temperature and number of moles, Using Boyle's law
Given ,
V₁ = 200 mL
V₂ = ?
P₁ = 60 kPa
P₂ = 120 kPa
The new volume of the gas is 100mL
Boyle's law is use to calculate the volume of a gas in relation with its pressure. The Boyle's law equation is as follows:
P1V1 = P2V2
Where;
P1 = initial pressure of the gas (torr)
P2 = final pressure of the gas (torr)
V1 = initial volume of the gas (mL)
V2 = final volume of the gas (mL)
According to the information of this question, the pressure on 200mL of a gas changed from 380 torr to 760 torr. Hence;
V1 = 200mL
V2 = ?
P1 = 380torr
P2 = 760torr
Using P1V1 = P2V2
V2 = P1V1/P2
V2 = (380 × 200) ÷ 760
V2 = 76000 ÷ 760
V2 = 100mL
Hence, the new volume of the gas is 100mL
Learn more: https://brainly.com/question/22467228
Which statement describes the best way to determine how different levels of light affect the growth of seedling plants?
Choose three different light levels, and place four identical plants under each light level to observe the light’s effect on multiple plants.
Choose five different light levels, and place one identical plant under each of the light levels for exactly one week.
Choose four different light levels, and place eight different plant types under the light levels, two under each one, and observe them every day.
Choose one type of light and one type of plant, and then observe the plant for at least four weeks, measuring it each day.
Answer:
Choose three different light levels, and place four identical plants under each light level to observe the light’s effect on multiple plants.
Explanation:
100.0 g of water was placed in a simple, constant-pressure calorimeter. The temperature of the water was recorded as 295.0 K. A 20.0 g copper block was heated to 353.0 K and then dropped into the water in the calorimeter. What was the final temperature of the water if the specific heat capacities of copper is 0.385 J/g K
Answer:
[tex]296.05\ \text{K}[/tex]
Explanation:
[tex]m_w[/tex] = Mass of water = 100 g
[tex]c_w[/tex] = Specific heat of water = [tex]4.184\ \text{J/g K}[/tex]
[tex]m_c[/tex] = Mass of copper = 20 g
[tex]c_c[/tex] = Specific heat of copper = [tex]0.385\ \text{J/g K}[/tex]
[tex]\Delta T_w[/tex] = Temperature change in water = [tex](T-295)[/tex]
[tex]\Delta T_c[/tex] = Temperature change in cooper = [tex](353-T)[/tex]
T = Final temperature of the system
The heat balance of the system is given by
[tex]m_wc_w\Delta T_w=m_cc_c\Delta T_c\\\Rightarrow 100\times 4.184\times (T-295)=20\times 0.385\times (353-T)\\\Rightarrow 418400\left(T-295\right)=7700\left(353-T\right)\\\Rightarrow 418400T-123428000=2718100-7700T\\\Rightarrow T=\frac{1261461}{4261}\\\Rightarrow T=296.05\ \text{K}[/tex]
The final temperature of the water is [tex]296.05\ \text{K}[/tex].
The final temperature of the water when placed in a calorimeter is 296.05K
HOW TO CALCULATE FINAL TEMPERATURE:
The final temperature of water placed in a calorimeter can be calculated using the following expression:Q(water) = - Q(copper)(m × c × ∆T) water = - {m × c × ∆T} copperWhere;
Mass of water = 100 gSpecific heat of water = 4.184 J/g KMass of copper = 20 gSpecific heat of copper = 0.385 J/g KTemperature change in water = T - 295KTemperature change in copper = T - 353K100 × 4.184 × (T - 295) = - {20 × 0.385 × (T - 353)}418.4T - 123428 = - (7.7T - 2718.1)418.4T - 123428 = -7.7T + 2718.1418.4T + 7.7T = 123428 + 2718.1426.1T = 126146.1T = 126146.1 ÷ 426.1T = 296.05KTherefore, the final temperature of the water when placed in a calorimeter is 296.05K.Learn more at: https://brainly.com/question/10987564?referrer=searchResults
Which of the following accurately describes the function of the muscular
system?
O A. To prevent and fight disease
B. To provide support for the body
C. To get rid of wastes and excess water
D. To allow the body to move
How many liters would you need to make a 0.8 M solution with 20 grams of lithium chloride?
Answer:
0.5875L
Explanation:
concentration = mole/ volume
n(LiCl) = 20 / (7 + 35.5) = 0.47 mol
volume = mole / conc.
volume = 0.47 /0.8
= 0.5875 dm³ = 0.5875L
How does publishing in scientific journals help ensure that science leads to
reliable results?
A. It allows results to be reviewed and reproduced by other
scientists.
B. It allows the public to decide if science is worthwhile.
C. It shows which experiments are the most popular with scientists.
D. It gives scientists a reason to do more experiments.
Answer:
A. it allows results to be reviewed and reproduced by other scientists.
My swimming pool is rectangular (16 feet by 34 feet) and has a depth of 6 feet. Lets imagine that my pool water is full to the top and is heated by a laser that emits photons with a wavelength of 520 nm. The starting temperature of my pool is a chilly 52 degrees Celsius. How many moles of photons would be required to heat the pool to a balmy 80 degrees Celsius
Answer:
Number of moles of photons required = 5.04 × 10⁴ moles
Explanation:
The energy of a photon can be calculated from Planck's equation E = hc/λ
Where h = 6.63 × 10-³⁴ Js and c, the velocity of light = 3.0 × 10⁸ m/s
Energy of one mole of photons = N₀ × hc/λ
wavelength of photon, λ = 520 nm = 5.20 × 10-⁷ m
Energy of one mole of photons = 6.02 × 10²³ × 6.63 × 10−³⁴ × 3 × 10⁸/5.20 × 10-⁷
Energy of one mole of photons = 2.30 × 10⁵ J/mol
Energy required to raise the temperature of a given mass of a substance, E = mcΔT
Where m is mass of substance, c is specific heat capacity, ΔT is temperature difference
Mass ofnwternin the pool = volume × density
Volume of water = Volume of swimming pool
Volume of water = 16 × 34 × 6 ft³ = 3264 ft³
1 ft³ = 28316.8 cm³; 3264 ft³ = 28316.8 × 3264 = 92426035.2 cm³
Density of water = 1 g/cm³
Mass of water = 92426035.2 cm³ × 1 g/cm³ = 92426035.2g
ΔT = 80°C - 50°C = 30°C, c = 4.18 J/g/K
Energy required to raise 92426035.2 g water by 30° C = 92426035.2 × 4.18 × 30
Energy required = 1.16 × 10¹⁰ J
Hence, number of moles of photons required = 1.16 × 10¹⁰ J/2.30 × 10⁵ J/mol
Number of moles of photons required = 5.04 × 10⁴ moles
A body system is a group of organs that work together to keep the organism
alive. How does the respiratory system help to keep an organism alive?
A. The respiratory system helps the organism respond to its
environment.
B. The respiratory system helps the organism absorb nutrients from
its environment.
O C. The respiratory system takes in oxygen and releases carbon
dioxide.
O D. The respiratory system carries oxygen to the organism's cells.
Answer:The lungs expel the carbon dioxide and bring in new oxygen-containing air. Only when both systems are working together can oxygen and carbon dioxide be successfully exchanged between cells and environment. There are many other examples of this cooperation in your body.
Explanation:
Hope it will help
Question:
A body system is a group of organs that work together to keep the organism
alive. How does the respiratory system help to keep an organism alive?
A. The respiratory system helps the organism respond to its
environment.
B. The respiratory system helps the organism absorb nutrients from
its environment.
O C. The respiratory system takes in oxygen and releases carbon
dioxide.
O D. The respiratory system carries oxygen to the organism's cells.
Answer:
O C. The respiratory system takes in oxygen and releases carbon
dioxide.
Explanation:
Breathing uses chemical and mechanical processes to bring oxygen to every cell of the body and to get rid of carbon dioxide. Our body needs oxygen to obtain energy to fuel all our living processes. Carbon dioxide is a waste product of that process
Hope This Helps?