How much weight can be placed on the spring so that the end of the spring is 2m above the ground?

The final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.

The law of conservation of energy states that energy can neither be created nor destroyed but can be transformed from one form to another.

The total work done on the process will be conserved.

The lever is a simple machine which makes work easier by reducing the force applied to the load and increasing the distance traveled by the load.

Thus, the final force on the rock was smaller than the original force from the person and the distance the rock traveled was greater than the original distance the lever moved, so the total work stayed the same.

Learn more about lever here: https://brainly.com/question/416386

#SPJ1

The angles in the triangle are 91 degrees, 53 degrees and 36 degrees respectively.

From the cosine rule we know that;

c^2 = a^2 + b^2 - 2abcosC

Since;

a = 0.47 m

b =  0.62 m

c =  0.78 m

Then;

(0.78)^2 = (0.47)^2 + (0.62)^2 - 2(0.47 * 0.62)cosC

0.61 = 0.22 + 0.38 - 0.58 cosC

0.61 - ( 0.22 + 0.38) = - 0.58 cosC

0.01 = - 0.58 cosC

C = cos-1(0.01/-0.58)

C = 91 degrees

Using the sine rule;

b/Sin B = c/Sin C

0.62/sinB = 0.78/sin 91

0.62/Sin B = 0.78

B = sin-1 (0.62//0.78)

B = 53 degrees

Angle A is obtained from the sum of angles in a triangle;

180 - (91 + 53)

A = 36 degrees

Learn more about triangle:https://brainly.com/question/2773823

#SPJ1

Answer:

5875yuguggjgefutfhyds

Explanation:

hfgjffiig

As a result this technological improvement, our structural information of rocks has improved greatly.

A petrographic microscope is a type of optical microscope that is used to identify rocks and minerals in very thin sections and also to investigate microscopic textures and features that are present in minerals and rocks.

This has improved greatly recent structural information about rocks.

Hence, microscopes used in the study of structures of rocks has overtime improved greatly our structural information about them

Learn more about structure of rocks here:

https://brainly.com/question/20151682

#SPJ1

Answer:

B is the correct answer.

Explanation:

Answer:

elastic potential energy

You input potential (stored) energy into the rubber band system when you stretched the rubber band back. Because it is an elastic system, this kind of potential energy is specifically called elastic potential energy.

Explanation:

The changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.

The term conservation of energy means that energy can not be created nor destroyed.

In this case, the changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.

Learn more about conservation of energy:https://brainly.com/question/2137260

#SPJ1

Answer:

B. A sharp

Explanation:

A marble rolls off a tabletop 1.15 m high and hits the floor at a point 4 m away from the edge of the table in the horizontal direction,

This is further explained below.

Generally, the equation for motion is mathematically given as

S= ut + 0.5at²

Therefore

y = Voy t + 0.5gt^2

1 = 0.5x 98 x 6²

1=4.9t^2

[tex]t=\sqrt{0.2041 }[/tex]

t= 0.45 seconds.

b) Horizontal motions are uniform.

V=Horizontal displacement/time

V=1/0.45

V=2.22m/s

C)

Vx: 2.22 m/s At bottom,

Vy² = Voy² + 2as

Vy² = 2x95x1

Vy² = 19.6

Total velocity

[tex]VT=\sqrt{( 2.22 m/)^2+19.6}[/tex]

VT=4.95 m/s

Read more about  Arithmetic

https://brainly.com/question/22568180

#SPJ1

The amount of force required to accelerate the given mass of the wagon is 129 Newtons.

A force is simply referred to as either a push or pull of an object resulting from the object's interaction with another object.

From Newton's Second Law, force is expressed as;

F = m × a

Where is mass of object and a is the acceleration.

Given the data in the question;

F = 8.6kg × 15m/s²

F = 129kgm/s²

F = 129N

Therefore the amount of force required to accelerate the given mass of the wagon is 129 Newtons.

Learn more about force here: brainly.com/question/27196358

#SPJ1

The radius of a magnesium atom is 0.160nm. The radius of a nucleus is about 1/10000 that of an atom.

The nucleus is an organelle that contains the DNA i.e. genetic material and other materials which is required for cellular processes. It is only found in eukaryotic cells that is responsible for controlling the processes of the cell.

So we can conclude that the radius of a magnesium atom is 0.160nm which is equals to about 1/10000 radius of that atom.

Learn more about radius here: https://brainly.com/question/24375372

#SPJ1

The surface of the stone which he should put on the ground is the base.

This is defined as the flat end which is usually located at the bottom with a larger surface area.

The large surface area helps to distribute the forces on all parts thereby preventing it from sinking.

Read more about Base here https://brainly.com/question/9624014

#SPJ1

Answer:

Examples of Gravitational Potential Energy

A raised weight.

Water that is behind a dam.

A car that is parked at the top of a hill.

A yoyo before it is released.

River water at the top of a waterfall.

A book on a table before it falls.

A child at the top of a slide.

Ripe fruit before it falls.

Explanation:

Any object in motion is using kinetic energy: a person walking, a thrown baseball, a crumb falling from a table, and a charged particle in an electric field are all examples of kinetic energy at work.

Hi! digital forensics is important because not only does digital forensics allow cyber security organisations to develop technologies that can prevent hackers from accessing devices, websites and networks but can lead businesses in the direction of understanding exactly what data is compromised.

The weather forecast for the locations includes:

London - 21°C°, Precipitation: 60%, Humidity: 79%, Wind: 11 km/h.

New York - 26°C°, Precipitation: 50%, Humidity: 76%, Wind: 19 km/h.

It should be noted that weather is the state of the atmosphere with respect to heat or cold, calm or storm, clearness or cloudiness.

Weather forecast is an analysis of the state of the weather in an area with an assessment of the likely developments.

Learn more about weather on:

https://brainly.com/question/17922964

#SPJ1

Answer:

6 amps

Explanation:by Kirchhoff's loop rule the current at any point in the loop must be equal or charge would be building up. The current at the ammeter is equally to the total current through the sun of the paths in parallel which it is in series with

Answer:

metal, non, metal, metal, non, non, metal, non

Explanation:

knowledge

Answer:

A

Explanation:

KE = 1/2 m v^2

     the greatest is  A

Answer:

Light waves are electromagnetic waves while sound waves are mechanical waves. :)

a) The magnitude will be 0.838m

b) The displacement will be -17.35°

The path covered by an object from its initial point to final point.

Forces acting on the duck

x-axis:    0.13 + 0.16*cos(-56°) = 2.7 * ax  

ax = 0.0813 m/s^2

y-axis:    0.13*sin(-56°) = 2.7 * ay  

ay = -0.0491 m/s^2

The displacement on the x-axis

X = Vox * t + ax/2 * t²

X = 0.12* 3.2 + 0.0813/2*3.2²

X = 0.8

The displacement on the y-axis:

Y = Voy * t + ay/2 * t²

X = 0 - 0.0491/2*3.2²

Y=-0.25m

So, the magnitude and angle of this displacement [0.8,-0.25] is:

0.838m  at an angle of -17.35°

For more displacement related question visit

https://brainly.com/question/11934397

#SPJ1

Answer:

People used wind energy to propel boats along the Nile River as early as 5,000 BC. By 200 BC, simple wind-powered water pumps were used in China, and windmills with woven-reed blades were grinding grain in Persia and the Middle East.

Explanation:

Hope it helps you:)))))

have a good day

Answer:

The contribution of the wavelets lying on the back of the wave front is zero because of something known as the Obliquity Factor. It is assumed that the amplitude of the secondary wavelets is not independent of the direction of propagation, Sources: byju's.com

According to the Voigt and Kirchhoff's law for wavelets, the contribution of a wavelet in any direction making an angle x with the normal to the wavelet is proportional to {1+cos(x)/2)}

For wavelet lying on the back of secondary wavefront,

→ So, the proportional factor:

→ {1+cos(180°)/2}

→ (1-1/2)

→ (0/2)

→ 0

That's why the contribution of the wavelets lying on the back of secondary wave front is zero

The power dissipated by the LED is 20 Watts and the work done for 1 hour 15 minutes is 56.25 kJ.

Electrical power is the rate at which electrical work is done.

The LED is 75% efficient means that 75% of power dissipated by the LED is converted to light.

Total power dissipated = 5 × 2.5 = 12.5 Watts

Work done = 12.5 × (1 × 3600 + 15 × 60)

Work done = 56250 J = 56.25 kJ

Therefore, the power dissipated by the LED is 20 Watts and the work done for 1 hour 15 minutes is 56.25 kJ.

Learn more about electrical power and work done at: https://brainly.com/question/23901751

#SP1

Answer:

Work done =3 joules

Explanation:

1 volt is the same as 1 Coulomb and 1 Joule

V=W/Q

1=W/3

W=3 x 1

W=3 Joules

Answer:

Power in the circuit is 0.1 amp

Explanation:

The power in the circuit is given by the formula

      P = V x I

Where P is Power, V is voltage supplied and I is current in circuit.

so,      I = P/v

            = 2/20

            =0.1 A

Study more about power

https://brainly.in/question/1063947

Answer:

Option B - 360 J

Explanation:

One of the formulas used to find out how much work was done is :

E = 0.5×m×v² (where m is the mass and v is the velocity)

Now we substitute values from the question and simplify :

E = 0.5×500×1.2²

E = 250×1.2²

E = 250×1.44

E = 360 J

So our answer is Option B

Hope this helped and have a good day

Two wires increase in length by the same amount when both their temperatures increase by the same amount, the shortness of the wire before the temperature increase is mathematically given as

dL=0.1485m

Generally, the equation for change in length is mathematically given as

[tex]dl=lo \alpha dt[/tex]

Therefore

dl1=dl2

Where

a2=1.35a1

Hence

a1l1dt= a2l2dt

a1(1.2525)= a1*(1.135)(l2)

L2=1.104m

In conclusion, a change in length due to temperature is

dL=1.2525-1.104m

dL=0.1485m

Read more about Temperature

https://brainly.com/question/13439286

#SPJ1

Answer:

c

Explanation:

120V is the line-to-neutral voltage .

It is defined as the voltage of a power transmission circuit or distribution circuit up to the point of transformation or utilization.

The secondary line voltage is [tex]V_{L} = 280 V[/tex]

The notation AC indicates that the current is an alternating current.

The given formula is [tex]V_{ph} = \frac{V_{L} }{\sqrt{3} }[/tex]

Substitute  208 V into the formula

[tex]V_{ph} = \frac{V_{L} }{\sqrt{3} } \\\\V_{ph} = \frac{208V}{\sqrt{3} } \\\\= 120 (Approx)[/tex]

So, the line-to-neutral voltage is 120 V.

learn more about line voltage :https://brainly.com/question/22598217

#SPJ1