Answer:
Number of mole in Oxygen = 2.24 mol
Explanation:
Given:
Amount of carbon dioxide (CO₂) = 49.2 gram
Find:
Number of moles in Oxygen
Computation:
Molecular weight of CO₂ = 44 gram (Approx)
Number of mole in CO₂ = 49.2 / 44
Number of mole in CO₂ = 1.11818182 mol
CO₂ has 2 mole of Oxygen,
So,
Number of mole in Oxygen = 2 × 1.11818182
Number of mole in Oxygen = 2.23636364
Number of mole in Oxygen = 2.24 mol
For element radon, give the chemical symbol, atomic number, and group number.
There are eight consitutional isomers with the molecular formula C4H11N.
name and draw a structural formulas for each amine.
Answer:
See figure 1
Explanation:
We have to remember that in the isomer structures we have to change the structure but we have to maintain the same formula, in this case [tex]C_4H_1_1N[/tex].
In the formula, we have 1 nitrogen atom. Therefore we will have as a main functional group the amine group.
In the amines, we have different types of amines. Depending on the number of carbons bonded to the "N" atom. In the primary amines, we have only 1 C-H. In the secondary amines, we have two C-N bonds and in the tertiary amines, we have three C-N bonds.
With this in mind, we can have:
-) Primary amines:
1) n-butyl amine
2) sec-butyl amine including 2 optical isomers
3) isobutyl amine
4) tert-butyl amine
-) Secondary amines:
5) N-methyl n-propyl amine
6) N-methyl isopropyl amine
7) N, N-diethyl amine
-) Tertiary amines:
8) N-ethyl N, N-dimethyl amine
See figure 1
I hope it helps!
If a reaction is first-order with respect to a particular reactant, when the concentration of that reactant is increased by a factor of 2, the reaction rate will _____.
Answer:
It would increase by a factor of 2
Explanation:
The rate law for a fist order reaction is given as;
A --> B
rate = k [A]
upon doubling the concentration, we have;
rate = k [A]
rate 2 = k 2 [A]
Dividing both equations;
rate 2 / rate 1 = k 2 [A] / k [A]
rate 2 / rate 1 = 2 / 1
The ratio between rate 2 and rate 1 is 2 : 1. This means that the reaction rate would also increase by a factor of 2.
Draw a structure for an alcohol that exhibits a molecular ion at M+ = 88 and that produces fragments at m/z = 73, m/z = 70 and m/z = 59.
Answer:
3-pentanol
Explanation:
In this case, we have alcohol as the main functional group (OH) with a molecular ion at 88. If the molecular ion is 88 the molar mass is also 88 g/mol therefore the formula for the unknown molecule is [tex]C_5H_1_2O[/tex].
Additionally, if the mass spectrum shows the molecular ion peak we can not have tertiary alcohols (tertiary alcohols often do not show M+ at all). So, the structures only can be primary and secondary structures.
With this in mind, our options are:
-) 1-pentanol
-) 2-pentanol
-) 3-pentanol
Now we can analyze each structure:
-) 1-pentanol
The structure must explain all the fragments produced (73, 70, and 59). In this primary alcohol, we will have an alpha cleavage (the red bond would be broken). If this has to happen, we will have fragments at 31 and 57. These fragments dont fit with the reported ones, therefore this is not a possible structure (See figure 1).
-) 2-pentanol
On this structure, we will have also an alpha cleavage (red bond). In this rupture we will have fragments at 45 and 43, these m/z values dont fit with the reported ones, therefore this is not a possible structure (See figure 1).
-) 3-pentanol
In this structure, we have the "OH" bonded to carbon three. So, we can analyze each fragment:
-) m/z 59
This fragment, can be explained as an alpha cleavage. But, in this case we have two ruptures that can produce the same ion. The carbons on both sides of the C-OH bond.
-) m/z 71
This fragment, can be explained as a loss of water (M-18) in which we have the production of a carbocation in the carbon where we previously have the C-OH bond.
-) m/z 73
This fragment, can be explained as a beta cleavage. But, in this case, also we have two ruptures that can produce the same ion. The methyl groups on each end molecule.
See figure 2
I hope it helps!
Which of the following provides a characteristic of
MgO(s) with a correct explanation?
Choose 1 answer:
А
It is hard because its ions are held together by strong
electrostatic attractions.
B
It is malleable because its atoms can easily move past
one another without disrupting the bonding.
It is a poor conductor of electricity because its
electrons are tightly held within covalent bonds and
lone pairs.
It has a high melting point because its molecules
interact through strong intermolecular forces.
Answer:
А It is hard because its ions are held together by strong electrostatic attractions.
B It is malleable because its atoms can easily move past one another without disrupting the bonding.
Explanation:
These are correct explanations of the properties of magnesium.
C is wrong. Mg is a good conductor of electricity and it has metallic bonds.
D is wrong. Mg has no molecules. It has no intermolecular forces.
A closed-end manometer was attached to a vessel containing argon. The difference in the mercury levels in the two arms of the manometer was 9.60 cm. Atmospheric pressure was 783 mm Hg. The pressure of the argon in the container was ________ mm Hg.
Answer:
96 mmHg
[tex]h=96mmHg[/tex]
Explanation:
From this question,manometer end is closedw, So we can deduced that the height of the column will not be affected by the atmospheric pressure .
The difference of height of the mercury level is given as,
h=9.60cm
h=9.60(10mm/1cm)
[tex]h=96mm[/tex]
But it is obvious that in this closed end manometer.the pressure of the gas is equal to the height
P(gas)=h
P(gas)=96mmHg
This pressure is as a result of the presence of gas.
Therefore, the pressure of the argon gas in the container is 96mmHg.
The pressure of the argon in the container was 96mmHg.
We were told that the manometer has closed ends which means that the
height will not be affected by atmospheric pressure.
The height which is the difference in mercury level is
h=9.60cm
We can convert it to millimeter by multiplying it by 10
h=9.60 × 10 = 96mm
The pressure of the closed end manometer will be equal to the height
P(gas)=h
P(gas)=96mmHg
The pressure of the argon gas in the container is 96mmHg.
Read more on https://brainly.com/question/17151458
Does a reaction occur when aqueous solutions of potassium hydroxide and chromium(III) bromide are combined
Explanation:
Potassium hydroxide = KOH
Chromium(iii)bromide = CrBr3
Yes! A reaction occurs. This is given by the balanced equation;
3 KOH + CrBr3 → 3 KBr + Cr(OH)3
What creation would you make if you had access to any of the chemical elements? can someone answer this for me please.
Answer:
Depends on the chemicals.
Explanation:
The creation of something depends on the chemical we have. If I have chemicals such as acid and base so I can produce salt and water by mixing acid and base. If I have ethanol, vegetable oil and sodium hydroxide which is a catalyst, I can produce biodiesel which can be used in vehicles instead of fossil fuel. If I have sodium element and chlorine gas, I can produce sodium chloride also known as table salt.
Which of the following is a covalent bond? A NaCl B K2O C H2O D MgO
Answer:
[tex]H_2O[/tex]
Explanation: Research has proven that ;
Water is a Polar Covalent Molecule
It consists of 2 Hydrogen molecules bonded to one Oxygen molecule and the two hydrogen atoms are not evenly distributed around the oxygen atom.
Which of the following substances (along with its corresponding salt) would be best suited for generating a buffer solution with a pH below 7?
a. CH3CO2H
b. C5H5N
c. HCl
d. None of the above
Answer:
d. None of the above
Explanation:
A buffer works when pH of the buffer is ± 1. Out of this range, the buffering capacity is very low.
Acetic acid, CH₃CO₂H, has a pKa of 4.74. That means its buffering capacity is between 3.74 and 5.74 of pH. Is not a good buffer to pH 7
Pyridine is a weak base with pKa of 5.52. Its buffering capacity is between 6.52 and 4.52. Is not a good buffer to pH 7
HCl is a strong acid. Just weak acids and bases can produce a buffer with its conjugate base. HCl can't produce a buffer.
Thus, right answer is:
d. None of the aboveAnswer:
CH3CO2H
Explanation:
A weak acid, such as acetic acid, paired with its conjugate base (here, the acetate ion) will be an ideal system for creating an acidic buffer solution with a pH below 7.
A compound is found to contain 30.45 % nitrogen and 69.55 % oxygen by weight. To answer the questions, enter the elements in the order presented above. 1. What is the empirical formula for this compound? 2. The molecular weight for this compound is 46.01 g/mol. What is the molecular formula for this compound?
Answer:
Empirical formulae is NO2
Molecular Formulae is NO2
Question 8 of 30
When is a redox reaction spontaneous?
A. When a metal electrode is in contact with an electrolyte
B. When a power source supplies an electrical current
C. When the cell potential is positive
D. When the cell potential is negative
According to the concept of redox reactions, the answer to this question is option C.
When the cell potential is positive. A redox reaction is spontaneous when the cell potential is positive.The cell potential is the measure of the driving force of the chemical reaction occurring in the electrochemical cell. In an electrochemical cell, a redox reaction occurs, which leads to the production of an electric potential.
If this potential is positive, then the redox reaction is considered spontaneous. However, if the potential is negative, then the reaction is non-spontaneous.In general, a redox reaction is spontaneous if the potential difference between the two electrodes of the cell is positive. This means that the reaction will occur spontaneously without any external energy input.
Thus, the correct option is C.
Learn more about redox reaction,here:
https://brainly.com/question/28300253
#SPJ4
Using the following diagram, determine which of the statements below is true: The activation energy for the forward reaction is −60 J. The overall energy change for the forward reaction is −20 J. The activation energy for the reverse reaction is −80 J. The overall energy change for the reverse reaction is −40 J.
Answer:its saturated or unsaturaded
Explanation:
Please help, Which molecule is shown below
Answer:
Option B. 3–methylheptane.
Explanation:
To obtain the name of the compound given in the question above, we must
1. Determine the functional group of the compound.
2. Locate the longest continuous carbon chain. This gives the parent name of the compound.
3. Identify the substituent groups attached.
4. Locate the position of the substituent group attached by giving it the lowest possible count.
5. Combine the above to obtain the name.
Now let us name the compound given in the question above.
1. The compound is an alkane since it contains only single bond.
2. The longest continuous carbon chain is 7. Hence the parent name I the compound is heptane.
3. The substituent group attached is
—CH3 i.e methyl.
4. The substituent group attached is at carbon 3.
5. Therefore, the name of the compound is:
3–methylheptane.
What is the concentration of A after 50.7 minutes for the second order reaction A → Products when the initial concentration of A is 0.250 M? (k = 0.117 M⁻¹min⁻¹)
Answer:
0.101 M
Explanation:
Step 1: Given data
Initial concentration of A ([A]₀): 0.250 MFinal concentration of A ([A]): ?Time (t): 50.7 minRate constant (k): 0.117 M⁻¹.min⁻¹Step 2: Calculate [A]
For a second-order reaction, we can calculate [A] using the following expression.
1/[A] = 1/[A]₀ + k × t
1/[A] = 1/0.250 M + 0.117 M⁻¹.min⁻¹ × 50.7 min
[A] = 0.101 M
The standard free energy change for a reaction can be calculated using the equation ΔG∘′=−nFΔE∘′ ΔG∘′=−nFΔE∘′ where nn is the number of electrons transferred, FF is Faraday's constant, 96.5 kJ·mol−1·V−1, and ΔE∘′ΔE∘′ is the difference in reduction potential. For each of the given reactions, determine the number of electrons transferred (n)(n) and calculate standard free energy (ΔG∘′)(ΔG∘′) . Consider the half-reactions and overall reaction for reaction 1. half-reactions:fumarate 2−+2H+CoQH2↽−−⇀succinate−↽−−⇀CoQ+2H+ half-reactions:fumarate−+2H+↽−−⇀succinate2−CoQH2↽−−⇀CoQ+2H+ overall reaction:fumarate2−+CoQH2↽−−⇀succinate2−+CoQΔE∘′=−0.009 V
Answer:
ΔG°′ = 1.737 KJ/mol
Explanation:
The reaction involves the transfer of two electrons in the form of hydride ions from reduced coenzyme Q, CoQH₂ to fumarae to form succinate and oxidized coenzyme Q, CoQ.
The overall equation of reaction is as follows:
fumarate²⁻ + CoQH₂ ↽⇀ succinate²⁻ + CoQ ; ΔE∘′=−0.009 V
Using the equation for standard free energy change; ΔG°′ = −nFΔE°′
where n = 2; F = 96.5 KJ.V⁻¹.mol⁻¹; ΔE°′ = 0.009 V
ΔG°′ = - 2 * 96.5 KJ.V⁻¹.mol⁻¹ * 0.009 V
ΔG°′ = 1.737 KJ/mol
How to do q solution, qrxn, moles of Mg , and delta Hrxn?
Answer:
14, 508J/K
ΔHrxn =q/n
where q = heat absorbed and n = moles
Explanation:
m = mass of substance (g) = 0.1184g
1 mole of Mg - 24g
n moles - 0.1184g
n = 0.0049 moles.
Also, q = m × c × ΔT
Heat Capacity, C of MgCl2 = 71.09 J/(mol K)
∴ specific heat c of MgCL2 = 71.09/0.0049 (from the formula c = C/n)
= 14, 508 J/K/kg
ΔT= (final - initial) temp = 38.3 - 27.2
= 11.1 °C.
mass of MgCl2 = 95.211 × 0.1184 = 11.27
⇒ q = 11.27g × 11.1 °C × 14, 508 j/K/kg
= 1,7117.7472 J °C-1 g-1
∴ ΔHrxn = q/n
=1,7117.7472 ÷ 0.1184
= 14, 508J/K
(9443+45−9.9) (9443+45−9.9) ×8.4× 10 6
A chemist prepares a solution of sodium nitrate by measuring out of sodium nitrate into a volumetric flask and filling the flask to the mark with water.
Calculate the concentration in mol/L of the chemist's sodium nitrate solution. Round your answer to 3 significant digits.
Answer:
5.74M or 5.74 mol/L (to 3 sign. fig.)
Explanation:
The molar mass of NaNO3 is 85g/mol, which means that:
1 mole of NaNO3 - 85g
? moles - 122.0g
= 122/85 = 1.44 moles
Concentration in mol/L = no. of moles (moles) ÷ volume (L)
[tex]\frac{1.44}{0.250}[/tex] = 5.74M or 5.74 mol/L (to 3 sign. fig.)
I hope the steps are clear and easy to follow.
In the Lewis structure of AB4 where B is more electronegative than A. Both are main group elements where A has 8 valence electrons and each B has 7 valence electrons.
Required:
a. What is the total number of valence electrons?
b. How many lone pairs are in the molecule?
Answer:
1. 36
2. Two
Explanation:
The Lewis structure shows the valence electrons present in a compound. Usually the valence electrons are shown as dot structures around the symbol of the elements involved in the compound.
For a compound AB4 where B is more electronegative than A and A has 8 electrons in its valence shell, there will be thirty six valence electrons on the outermost shell of the molecule.
There are six electron pair domains present in the molecule, four bond pairs and two lone pairs. The molecule is in a square planar geometry.
Answer: a- 36 valence electrons
b- 14 lone pairs
Explanation:
Valence is equal to A + 4B = 8 + 4(7)
With 4 bonds between A and the 4 B, that is 36 valence minus 8 electrons in those pairs = 28. 28 is 14 lone pairs.
A critical reaction in the production of energy to do work or drive chemical reactions in biological systems is the hydrolysis of adenosine triphosphate, ATP, to adenosine diphosphate, ADP, as described by the reaction
ATP(aq)+H2O(l)→ADP(aq)+HPO2−4(aq) for which ΔGrxn=30.5 kJ/mol at 37.0∘C and pH 7.0.
Required:
Calculate the value of ΔGrxn in a biological cell in which [ATP]=5.0 mM, [ADP]=0.60 mM, and [HPO2−4]=5.0 mM
Answer:
ΔG = -49.64 KJ/mol
Explanation:
The actual free energy change of the reaction under the given conditions, ΔG is given by the formula below;
ΔG = ΔG'° + RT ln([ADP][HPO₂⁴⁻] / [ATP])
where ΔG'° = -30.5 KJ/mol; R = 8.315 J/mol.K; T = 37°C = 310 K; [ADP] = 5.0 mM = 0.005 M; [HPO₂⁴⁻] = 0.60 mM = 0.0006 M; [ATP] = 5.0 mM = 0.005 M
ΔG = -30.5 KJ/mol + (8.315 J/mol.K)(310 K) ln {(0.005)(0.0006)/(0.005)}
ΔG = -30.5 KJ/mol + (2.58 KJ/mol * -7.4186)
ΔG = -30.5 KJ/mol - 19.14 KJ/mol
ΔG = -49.64 KJ/mol
Which of the examples is potassium?
es )
A)
B)
B
C)
Answer:
examples of things which contain potassium are:
green vegetables
root vegetables
fruits
potassium chloride
potassium sulphate
Explanation:
if you need a specific answer please send the options
Answer:
C
Explanation:
The answer is the one with 20 protons, 20 neutrons, and 6-8-8-2 electrons.
(a) Identify the name of the method used below for the separation.
(b) Give one more application of this method of separation.
(c) What is the name for the line at position B ?
(d) what conclusions can you draw about the colours present in sweets C and D ?
Answer:
(a) Chromatography
(b) DNA fingerprinting
(c) Origin
(d) Sweet C consists of more colours than sweet D.
ii. The speed of colours in sweet C are proportional to one another, while that of colours in D is not.
Explanation:
Chromatography is one of the physical method of separating mixtures. This process composed of the ability of the constituents in a mixture to separate by virtue of rate of movement through a medium, thus separates into constituents.
It can be used to determine the soluble constituents of a given mixture. And for purification purpose.
How many grams of H2O will be formed when 32.0 g H2 is mixed with 73.0 g of O2 and allowed to react to form water
hope this helps u
pls mark as brainliest .-.
20. What volume of 0.350M KMnO4 solution must be diluted to prepare 600. mL of
0.150M KMnO4 solution?
Answer:
25.7 mL
Explanation:
Step 1: Given data
Initial volume (V₁): ?Initial concentration (C₁): 0.350 MFinal volume (V₂): 600 mLFinal concentration (C₂): 0.150 MStep 2: Calculate the volume of the initial solution
We have a concentrated solution and we want to prepare a diluted one. We can calculate the initial volume using the dilution rule.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0.150 M × 600 mL / 0.350 M
V₁ = 25.7 mL
g Which ONE of the following pairs of organic compounds are NOT pairs of isomers? A) butanol ( CH3-CH2-CH2-CH2-OH ) and diethyl ether ( CH3–CH2–O–CH2–CH3 ) B) isopentane ( (CH3)2-CH-CH2-CH3 ) and neopentane ( (CH3)4C ) C) ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 ) D) acrylic acid ( CH2=CH-COOH ) and propanedial ( OHC–CH2–CHO ) E) trimethylamine ( (CH3)3N ) and propylamine ( CH3-CH2-CH2-NH2 )
Answer:
ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 )
Explanation:
Isomers are compounds that have the same molecular formula but different structural formulas. Hence any pair of compounds that can be represented by exactly the same molecular formula are isomers of each other.
If we look at the pair of compounds; ethanolamine ( H2N-CH2-CH2-OH ) and acetamide ( CH3-CO-NH2 ), one compound has molecular formula, C2H7ON while the other has a molecular formula, C2H5ON, hence they are not isomers of each other.
Fireworks are chemical reactions that release energy. Which of these phenomena are caused by chemical reactions that release energy? If you’re not sure, make a guess.
Answer:
All chemical reactions involve energy. Energy is used to break bonds in reactants, and energy is released when new bonds form in products. Endothermic reactions absorb energy, and exothermic reactions release energy. The law of conservation of energy states that matter cannot be created or destroyed.
Calculate the molarity of a solution containing 29g of glucose (C 6 H 12 O 6 ) dissolved in 24.0g of water. Assume the density of water is 1.00g/mL.
Answer:
whats the ph ofpoh=9.78
Explanation:
An SN2 reaction is a type of _____________ in which the nucleophile attacks the electrophile.
Answer:
A bimolecular nucleophilic substitution (SN2) reaction is a type of nucleophilic substitution whereby a lone pair of electrons on a nucleophile attacks an electron deficient electrophilic center and bonds to it, resulting in the expulsion of a leaving group.
Which of the following is required for the flow of current in all systems?
a) the presence of ions
b) an electrical potential ofo
c) a closed circuit
d) a short circuit
Answer:
I would say c) a closed circuit.
Hope I was right.