Answer:
Photosynthesis is the process takes place in green plants in which the plants convert the carbon dioxide and water into the sugar molecule and oxygen in presence of the sunlight. The sunlight is trapped by the chlorophyll pigment, carbon dioxide uptake is facilitated by the stomata present on the leaves in the epidermis.
The water moves from the roots to the leaves and stem where it is used for photosynthesis and transpiration. The movement of water is through the xylem and sugar is move through the phloem from the leaves to a different part of the plant for nutrition and further process.
If you put 100g of NaOH in cube form and 200g of NaOH in powered form which will react with HCl at a faster rate? Explain why
Answer:
200g of NaOH in powered form will react with HCl at a faster rate
Explanation:
200g of NaOH in powered form will react with HCl at a faster rate because it is in powdered form and it will have high surface area to volume ration and hence high reactivity and rate of reaction as compared to the cube NaOH.
How do you name branched-chain alkanes?
Answer:
Explanation:
Branches or side chains are called alkyl radicals, they are named substituting the termination -ano for -yl or -il when it is part of a hydrocarbon.
The equilibrium constant for the reaction shown below is Kc=0.0091. If the equilibrium concentrations of A and B are 0.031 M and 0.0823 M, respectively, what is the equilibrium concentration of C?
Answer:
[tex][C]=0.0221M[/tex]
Explanation:
Hello there!
In this case, according to the given chemical reaction at equilibrium:
[tex]3A\rightleftharpoons 3B+2C[/tex]
It is possible for us to set up the equilibrium expression as shown below:
[tex]Kc=\frac{[B]^3[C]^2}{[A]^3}[/tex]
Whereas Kc, [A] and [B] are known as 0.0091, 0.031M and 0.0823M and it is required to calculate [C]; thus, we solve for it as follows:
[tex][C]^2=\frac{[A]^3Kc}{B]^3}[/tex]
[tex][C]=\sqrt{\frac{(0.031)^3*0.0091}{(0.0823)^3}}[/tex]
[tex][C]=0.0221M[/tex]
Best regards!
Materials that allow electrons to move easily from atom to atom are called _____________.
Answer:
Explanation:
conductors
How many atoms of carbon are in diamond
Answer:
A diamond contains 5.0 x 10 21 atoms of carbon.
______ is the tendency of an organism to maintain a constant and stable internal environment
Answer:
Homeostasis is the answer
Explanation: it maintains a constant and stable environment
Explain why NH3 has a higher solubility in water than SbHz.
Answer: NH3 has a higher solubility rate than SbH3 because it has much stronger bonds. ... HoCH2CH2OH because it can form two bonds with water compared to the other molecule which can only form one.
HOPE THIS HELPS
Toma en cuenta los textos para responder estas interrogantes: ¿Consideramos que la aplicación de las medidas de seguridad depende de las características de tu entorno?
Answer:
Si.
Explicación:
Sí, la aplicación de medidas de seguridad depende de las características de su entorno porque el entorno nos brinda para elegir las medidas de seguridad. Existen diferentes instrumentos utilizados para la seguridad de diferentes entornos. Algunas medidas de seguridad se aplican en un entorno mientras que el otro se aplica a otro entorno. Por ejemplo, el vallado es una medida de seguridad que se puede aplicar en el terreno pero no en el agua o cualquier zona fangosa, por lo que podemos decir que las características físicas deciden qué medida de seguridad se debe instalar en el entorno.
How many planets did early astronomers know about?
Answer:
5 Plants
Explanation:
Also can i have Brainlist
Will carbon and hydrogen atoms most likely form an ionic bond or a covalent bond?
What are the mole ratios of the following chemical equation: C3H8 + 5O2 --> 3CO2 + 4H2O?
Answer:Redox and combustion.
Explanation:
C3H8) reacts with oxygen in the air, so C3H8(g) + 5O2(g) = 3CO2(g) + 4H2O(g) Classification: Redox and combustion.
Question 24 of 33
Which of the following pairs of elements will form covalent bonds with each
other?
The Periodic Table
A. Magnesium (Mg) and oxygen (0)
B. Chromium (Cr) and zinc (Zn)
O
C. Silicon (Si) and nitrogen (N)
D. Potassium (K) and bromine (Br)
The elements that will form covalent bonds are Silicon (Si) and nitrogen (N), option C.
What are covalent bonds?A covalent bond is formed between two atoms by the mutual sharing of one or more pairs of electrons. The two atomic nuclei attract these electrons at the same time. When the difference in electro-negativities of two atoms is too small for electron transfer to form ions, a covalent bond forms.
Hydrogen (H₂) is a molecule with a single covalent bond as well as Halogens like Fluorine (F), Chlorine (Cl), Silicon (Si) and nitrogen (N).
Find out more on covalent bonds here: https://brainly.com/question/12732708
#SPJ1
I know the answer out here are points for you! It’s 3 if anyone needs the answer !
Answer:
lol thanks for the 10
Explanation:
How will popcorn protect a egg by reducing the force of impact on the egg? How does it work?
Answer:
The popcorn will take less impact because the force goes into the popcorn serving as a cushion for the egg. The egg will take less damage because the force will cancel out.
Explanation:
How many moles of O₂ are needed to burn 2.5 moles of CH₃OH?
Answer:
3.75 moles
Explanation:
The chemical equation is 2CH₃OH + 3O₂ -> 2CO₂ + 4H₂O
2 moles of CH₃OH are burned by 3 moles of O₂
For 2.5 moles of CH₃OH are burned by x moles of O₂
Let's solve for x :
2*x=2.5*3 => 2*x=7.5 => x=3.75 moles of O₂ are needed to burn 2.5 moles of CH₃OH
TRUE OR FALSE
All of the elements on Earth, except for hydrogen, were formed in the interiors of stars.
Answer:
True
Explanation:
I checked several websites to double check for you.
Answer:
Except for hydrogen and some helium created in the Big Bang, all of the stuff we, and the Earth around us, are made of, was generated in stars, through sustained fusion or in supernova explosions i thank its true :) hope this helps
Using an analogy of a water balloon, describe the function of the bladder.
Answer:
A bladder is like a balloon, because it holds urine, just like a balloon holds air. The urethra's function is to excrete urine from the human body.
Explanation:
A bladder and a balloon are similar, because it is the bladder which clasp urine, whereas a balloon clench air. The role of urethra is to eliminate urine from our human body.
What is bladder?The hollow organ which is in triangle shape and found in the lower abdomen just like a balloon is defined as the bladder. The urinary bladder is also known as a temporary reservoir of urine. Urine is reserved in the urinary bladder till it is removed out through the urethra.
As a result of the contraction of the wall of the urinary bladder, urine is eliminated from the body from time to time. The urine contains waste and extra fluid left over the body which has to be eliminated.
The bladder resembles the water balloon in that it holds urine in the similar way as the water balloon clench water. The water balloon pops when the amount of water exceeds than it can hold.
Thus the function of bladder and water balloon are found to be same.
To know more about bladder, visit;
https://brainly.com/question/28496978
#SPJ6
What are the three ways there can be a base change in a sequence?
Answer:
substitutions, deletions and insertions
HELP ASAP! 20 POINTS
What are some things that all plants need to grow?
Answer:
sunlight, water, carbon dioxide, soil, are the basics which you also have phosphorus and nitrogen
Describe the molecular structure of the three main types of lipids
Brainliest!!!!!
Answer:
Lipids are divided into three categories.
Triglycerides, phospholipids, and sterols are the three major forms of lipids.
How many atoms does 9.3 moles of Mo represent?
Answer:
5.60 × 10²⁴ Mo atomsExplanation:
The number of atoms can be found by using the formula
N = n × Lwhere n is the number of moles
N is the number of entities
L is the Avogadro's constant which is
6.02 × 10²³ entities
We have
N = 9.3 × 6.02 × 10²³
We have the final answer as
5.60 × 10²⁴ Mo atomsHope this helps you
Compare a low-dose rate internal radiation treatment to a high dose rate internal treatment. What do you think are the positives and negatives of each?
Why do you think we use heat to dissolve sodium tetraborate?
Answer:
Explanation:90% of people marry there 7th grade love. since u have read this, u will be told good news tonight. if u don't pass this on nine comments your worst week starts now this isn't fake. apparently if u copy and paste this on ten comments in the next ten minutes you will have the best day of your life tomorrow. you will either get kissed or asked out in the next 53 minutes someone will say i love u this is irrelevent but idrc lol
Evidence of Earth’s plate tectonic activity is most obvious after an earthquake. Which explanation best describes this plate tectonic movement?
A: Earth’s plates stress one another. However, when an earthquake occurs, plate movement is due to an unbalanced force on the plates.
B: Earth’s plates are moving fast. However, the force of friction slows their movement.
C: The force of gravity causes the floating plates to move up and down. The plate movement sometimes results in earthquakes.
D: Earth’s plates continually place stress on one another. However, the force is balanced during an earthquake.
Answer:a
Explanation:bc
Plates on Earth are moving quickly. Yet, friction causes them to travel more slowly. So, the correct options are B and C.
What are tectonic plates?Tectonic plates are enormous fragments of the upper mantle and crust of the Earth. They are composed of both continental and oceanic crust. Earthquakes occur around mid-ocean ridges and the large faults which mark the edges of the plates.
The Earth's plates are shifting swiftly. Nevertheless, friction slows their movement. Gravity causes the floating plates to rise and fall. On occasion, the movement of tectonic plates results in earthquakes.
When compared to the Earth's mantle, the plates behave like solid, unyielding shells. The lithosphere is the name given to this thick outer layer.
Thus, the correct options are B and C.
Learn more about Tectonic plates, here:
https://brainly.com/question/30805154
#SPJ3
You place a balloon in a closed chamber at standard temperature and pressure (STP). You triple the chamber pressure.
What happens to the balloon?
The volume stays the same.
The volume increases to three times its original volume.
The temperature must also change for the volume to change.
The volume decreases to one-third of its original volume.
Answer:
it pops?
Explanation:
The student wants to test the conductivity of each solution. Prior to carrying out the investigation, the student needs to identify the variables being controlled and the variables being changed between the two solutions. Which identification of the variables is correct?
Options:
The volume of the solution and the concentration of the solution are being changed between the two solutions, but the number of solute particles is being held constant.
The number of solute particles and the concentration of the solution are being changed between the two solutions, but the volume is being held constant.
The number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
The volume of the solution and the number of solute particles are being changed between the two solutions, but the concentration of the solution is being held constant.
Answer:b
Explanation: the particles will soon dissolve which means that the particles are changing but the volume is staying the same and the concentration is changing
The identification of the variables which is correct is that the number of solute particles is being changed between the two solutions, but the volume and concentration of the solution is being held constant.
What are variables?Variables are defined as any characteristics, number or quantity which can be measured . It can also be called as a data item . It is called as variable because they can vary and can have variety of values.
There are three types of variables 1) manipulated variable where in a condition is specified, 2) responding variable which is dependent on manipulated variable 3)controlled variable which do not change.
Example of manipulated variables are number of hours spent by a student studying , that of responding variable is result of a student and temperature is an example of controlled variable.
Learn more about variables,here:
https://brainly.com/question/17344045
#SPJ3
Can I have someone to talk to it’s really important and I need advice..
Answer:
go for it
Explanation:
Answer:
I would be happy to help
Explanation:
If 0.583 g of ammonia (NH3) is dissolved to make 250 mL of solution, what is the molarity?
Answer:
0.137 M NH3
Explanation:
First divide the mass of NH3 by the molar mass of NH3, and then divide by the volume to get molarity.
0.583 g / 17.031 g/mol = 0.0342 mol NH3
0.0342 mol NH3 / 0.250 L = 0.137 M NH3
PLEASE ANSWER!!!!!! WILL MARK BRAILIEST!!!! TYSM!!