Answer:
9.72 moles.
Explanation:
From the question given above, the following data were obtained:
Mass of H₂O = 175 g
Number of mole H₂O =?
Next, we shall determine the molar mass of H₂O. This can be obtained as follow:
Molar mass of H₂O = (2×1) + 16
= 2 + 16
= 18 g/mol
Finally, we shall determine the number of mole H₂O. This can be obtained as follow:
Mass of H₂O = 175 g
Molar mass of H₂O = 18 g/mol
Number of mole of H₂O =?
Mole = mass /Molar mass
Number of mole of H₂O = 175/18
Number of mole of H₂O = 9.72 moles
Newton's Law of Gravity says that any the effect of gravity between two objects depends on what two factors?
Answer:
Explanation:
you sack
Which one of the following ionic solids would have the largest lattice energy?
CaBr2
CsI
CaCl2
NaCl
NaF
Answer:
CaCl2
Explanation:
The ionic solid CaCl₂ would have the largest lattice energy. Therefore, option (c) is correct.
What is the lattice energy?Lattice energy is the heat of formation when one mole of crystalline ionic solid is generated from its constituent ions in their gaseous state.
For example, the lattice energy of sodium chloride crystal is the energy change of reaction when Na⁺ and Cl⁻ ions react to produce a NaCl crystal, which is equal to -786 kJ/mol.
The relation between lattice energy and lattice enthalpy at constant pressure is given by:
ΔU (lattice) = ΔH (lattice) - PΔV
Lattice energy is directly proportional to the charge on ions and inversely proportional to the interionic distance between ions.
For NaCl and NaF the charge on the ions is +1 and -1 while the size of the ions is small. So they have less lattice energy.
CsI ionic solid have a larger size of ions Cs⁺ and I⁻. So CsI will have less lattice energy. CsBr₂ has +2 charge on calcium but the size of both ios is larger. So, CsBr₂ will have less lattice energy.
CaCl₂ has + 2 charge on calcium as well as the ionic radius is also samll. Therefore, CaCl₂ would have the largest lattice energy.
Learn more about lattice energy, here:
https://brainly.com/question/13169815
#SPJ2
Write the complete balanced chemical equation _A+_BC3->_AC2 +_ B
Answer:
Prueba con tus argumentos quienes sufren mas con la violencia?
Answer:
Sure! The complete balanced chemical equation for the reaction you provided is: `2A + BC3 -> AC2 + 3B`.
PLEASE MARK AS BRAINLIESTHow many moles are in 74.8 grams of NaCl?
Answer:
1.28 mol NaCl
Explanation:
Find the mass of NaCl by adding the two elements atomic mass
Na: 22.99
Cl: 35.45
22.99+35.45=58.44 g
Now convert to moles
74.8 g / 58.44 g = 1.27994524298 mol
How do plants and animals react to changing environments?
When some solid ammonium nitrate was dissolved in water the temperature decreased from 22 oC to 3 oC. What can be deduced from this observation?
The dissolving is endothermic and ∆H is positive. The dissolving is endothermic and ∆H is negative. The dissolving is exothermic and ∆H is positive. The dissolving is exothermic and ∆H is negative.
Which is a correct statement about an endothermic reaction?
A. The bonds in the reactants are stronger than in the products and ∆H is positive.
B. The bonds in the products are stronger than in the reactants and ∆H is positive.
C. The bonds in the reactants are stronger than in the products and ∆H is negative
D. The bonds in the products are stronger than in the reactants and ∆H is negative.
Which is a correct statement about the following() enthalpy level diagram of a reaction? A. The reaction is exothermic and △H is positive.
E. The reaction is exothermic and △H is negative.
F. The reaction is endothermic and △H is positive.
G. The reaction is endothermic and △H is negative.
Which statements are correct for all exothermic reactions?
I. The products are more stable than the reactants.
II. The bonds in the products are stronger than the bonds in the reactants
III. The enthalpy of the products is less than the enthalpy of the reactants
A. I and II only
B. I and III only
C. II and III only
D. I, II and III
Answer:
1. The dissolving is endothermic and deltaH is positive
2. A. The bonds in the reactants are stronger than in the products and deltaH is positive
3. I can't see the diagram so I don't know the answer (it's a glitch on my part not yours, my school district blocks images automatically on their rented chromebooks)
4. A. I, and II only
Explanation:
When we measure the temperature of a solution, and we notice that the temperature of the water is decreasing, then this is an endothermic reaction..
The dissolved solute (the "invisible" ions) are absorbing the heat, causing the water around it to be colder.. **Heat moves from hot to cold, so the water is losing it's heat and the dissolving (dissolved solute) is gaining heat, meaning that it is Endothermic.
When a reaction is endothermic, the energy that is required to break bonds and attractive forces is greater than the energy required to form bonds and attractive forces. This means that the bonds in the reactants are stronger than in the products and deltaH is positive. Since we know that the energy in the reactants is greater, there is more heat in the reactants. This is also why the dissolved solute would be gaining heat.. If the energy of the reactants is stronger, when it breaks, it will release a lot of energy that the dissolved solute will be absorbing.
Think, heat (q, released or absorbed) is measured in Joules, the higher the Joules, the hotter something will be. So, if the heat (q) is negative, that represents the amount of Joules (heat) being released. If it is positive, that is the amount being absorbed. So, if heat is being absorbed then deltaH is positive.
If the diagram shows the products being at a higher energy level than the reactants, then the diagram shows an endothermic reaction.. If we see that the energy from the products is greater, than the energy of the system increased as it absorbed energy from its surroundings.
If the diagrams shows the reactants being at a higher energy level than the products, then the diagram shows an exothermic reaction.. Think of it this way, if we see that the energy from the reactants was greater, than the energy of the system was originally greater than the surroundings, but now (observing the products), it is not, as energy was lost to the surroundings, making this an exothermic reaction.
For exothermic reactions, the energy that is required to break bonds and attractive forces is less than the energy required to form bonds and attractive forces.. This means that energy in the products are greater, so as these bonds are broken and energy is released, the surroundings gain energy/heat. This means that the energy is favorable (more stable), the more negative our potential energy (energy of the system) is, the more favorable our process is.
How many moles are in 568 grams of Gold?
Which Kingdom does the organism belong to?
Animalia
Protista
Fungi
Plantae
pls help guys
Oxygen and chlorine gas are mixed in a container with partial pressure of 401 mmHg and 0.639 atm Respectively. What is the total pressure inside the container?
An atom of carbon contains 6 total electrons. How many of these electrons are in s orbitals?
1
2
4
6
Answer:
4
Explanation:
total electrons = 6
electronic configuration = 1s^2, 2s^2, 2p^6
so in s orbital there are 4 electrons.
Hope it helps you (｡◕‿◕｡)
can someone tell me the answer and how to do the problem?
Answer:
is tht wht u want
Explanation:
1 grams Sodium is equal to 0.043497607849056 mole.
What will be the volume occupied by 100 grams of oxygen gas
at STP?
Answer:70L
Explanation:
The volume occupied by 100g of oxygen gas at STP is 70L.
1 mole of a gas at STP occupies 22.4 L volume.
The same goes for oxygen gas, [tex]O_2[/tex]. 1 mole of [tex]O_2[/tex] occupies 22.4L volume.
Now the molar mass of [tex]O_2[/tex] is = 32g
So the number of moles of [tex]O_2[/tex] in 100g is
n = 100/32
n = 3.125 moles
Volume occupied by 3.125 moles or 100g of [tex]O_2[/tex] is
V = 3.125 × 22.4 L
V = 70 L volume is occupied by 100g of oxygen gas.
Learn more :
https://brainly.com/question/19958403
How many electrons does potassium have in its outside electron shell?
Answer:
Potassium (K) is of atomic number 19 and has only 1 electron in the outermost shell
And this is because of the octet rule of chemistry followed while determining the number of electrons in each shell.
According to the octet rule, there can only be a maximum of 8 electrons in the outer shell of an atom, So when 'L' shell of K is filled with 8 electrons to accommodate the 19th electron a new shell will be created
Significant figures are a measure of __________. an precise and accurate answer. the true value of a measurement. accuracy. precision.
Answer:
Significant figures are a measure of precision.
Explanation:
The significant figures of a number are those that have a real meaning and, therefore, provide some information. Therefore, the set of digits that are known with certainty in a measure are called significant figures and are the digits of a number considered non-null.
Any experimental measurement is inaccurate and must be expressed with its significant figures.
In this way, significant figures express the precision of a measuring tool.
Which population of frogs will best survive a change in the environment?
Answer:
B
Explanation:
it has the most frogs
Question 4 (2 points)
What is the percent composition of oxygen in aluminum phosphate? Round answer
to 3 significant figures.
A/
Answer:
52.5%.
Explanation:
The formula for aluminum phosphate is => AlPO₄
Next, we shall determine the molar mass of aluminum phosphate, AlPO₄. This can be obtained as follow:
Molar mass of AlPO₄ = 27 + 31 + (16×4)
= 27 + 31 + 64
= 122 g/mol
Next, we shall determine the mass of oxygen (O) in AlPO₄. This can be obtained as follow:
There are 4 atoms of O in AlPO₄.
Mass of O = 4 × 16 = 64 g
Finally, we shall determine the percent composition of oxygen in aluminum phosphate, AlPO₄. This can be obtained as follow:
Mass of O = 64 g
Molar mass of AlPO₄ = 122 g/mol
Percentage composition of oxygen =?
Percentage composition = mass of element/Molar mass of compound ×100
Percentage composition = 64/122 × 100
Percentage composition = 52.5%
Therefore, the percent composition of oxygen in aluminum phosphate, AlPO₄ is 52.5%
How would you make up 75 ml of a 45 mg/ml BSA solution?
Answer: see below
Explanation: for 75 ml, take 45*75 mg of BSA and make up to 75 mL with distilled water.
Answer the following questions
Answer:
silk are the answer of the question
14
Use the data in the table to work out the state of each substance at 25 °C. *
(3 Points)
Substance
Melting point (°C)
Boiling point (°C)
State at 25 °C
methane
-182
-164
dodecane
-10
216
phenol
43
182
(3 marks)
Enter your answer
This question is required.
16
Answer:
Explanation:
The melting point of a substance is the temperature at which its melt. The state of a substance is dependent on it's melting temperature. Generally, melting point above 25 °C is a solid.
This means phenol is a solid
Duodecane has melting point below 25 °C hence it is either a liquid or gas. However its boiling point of 216 °C means it would require higher temperature to boil it. Since 25 °C is less than 216 °C it means that it would remain in the liquid state.
Methane has melting point below 25 °C hence it is either a liquid or gas. However its boiling point of -164 °C means it boils easily even at very low temperatures. Since 25 °C is greater than -164 °C it means that it would exist in the gaseous state
1 This animal has a backbone, nurses its offspring: likes to gnaw, has a bushy tail: climbs trees; has reddish fur on its
back and has white fur on its belly.
Answer: American red squirrel
Explanation:
The American red squirrel is the smallest squirrel. The color of the fur may vary from season to season. The color of the squirrel can also vary depending of the environment in which it lives. In summer the black stripe appears on the sides over the white fur. It has a backbone and like other mammals nurses the offsprings. It has a bushy tail. It is a native of North America. Red fur appear on the back and white on the belly. Strong claws, strong muscles, and compact body are other key features of the squirrel.
5 What does 2Na2O mean?
Answer:
2 Na2O means two molecules of Sodium oxide.
mark me please
An artificial reef is intended to affect the ocean ecosystem by — А A removing pollution from the water B В providing shelter for marine organisms causing sediment to erode into deeper waters D preventing people from overfishing along the shore
Answer:
B
Explanation:
just answered
An artificial reef is intended to affect the ocean ecosystem by providing shelter and habitat for marine organisms causing sediment to erode into deeper waters. Hence, option C is correct.
What is artificial reef ?An artificial reef is a human-made underwater structure, typically constructed with the purpose of enhancing marine biodiversity, providing habitat for marine organisms, and promoting recreational activities like fishing, diving, and snorkeling.
Artificial reefs can be created from a variety of materials, such as concrete, metal, tires, and sunken ships. The reef structure can also increase the overall biodiversity of an area by creating a new habitat for species that may not have been present before.
Additionally, the presence of an artificial reef can help to reduce pressure on natural reefs by providing an alternative location for fishing and other activities. However, artificial reefs are not typically used as a means of removing pollution from the water or preventing erosion.
Therefore, option C is correct.
Find more on artificial reef:
https://brainly.com/question/17238115
#SPJ2
why do you think they stilk proruxe bright flowers to attract bees?
Answer:
A
Explanation:
In order for plants to entice pollinators, they must first offer their favorite foods: nectar and protein. Since most pollinators fly, the colors of a flower must attract them; therefore, the brighter the flower, the more likely it will be visited. ... For instance, bees are attracted to bright blue and violet colors.
hope this helps you out...
Hypothesis: What do you think will happen when you add more magnets to the set up?
Answer:
........................
Oxygen gas, generated by the reaction 2KClO3 (s) 2KCl(s) 3O2 (g) is collected over water at 27°C in a 1.35-L vessel at a total pressure of 1.00 atm. (The vapor pressure of H2O at 27°C is 26.0 torr.) How many moles of KClO3 were consumed in the reaction?
Answer:
[tex]n_{KClO_3}=0.0353molKClO_3[/tex]
Explanation:
Hello!
In this case, according to the experiment, we first realize that the pressure of oxygen is:
[tex]p_{O_2}=1.00atm-26.0/760 atm=0.966atm[/tex]
Next, we compute the moles based off the ideal gas law:
[tex]PV=nRT\\\\n=\frac{PV}{RT}=\frac{0.966atm*1.35L}{0.08206\frac{atm*L}{mol*K}*300K}=0.0530molO_2[/tex]
Thus, since there is 3:2 mole ratio between oxygen and potassium chlorate, we can compute the consumed moles of the latter as shown below:
[tex]n_{KClO_3}=0.0530molO_2*\frac{2molKClO_3}{3molO_2} \\\\n_{KClO_3}=0.0353molKClO_3[/tex]
Best regards!
When your grandparents were growing up, they ate
mostly foods grown or produced near them. Describe how the
food you eat is different from the food your grandparents ate
as a result of science’s impact on agriculture and transportation
Argon makes up about 0.93% of our atmosphere. If the atmospheric pressure is 760 mm Hg, what is the pressure contributed by argon?
Answer:
[tex]P_{Ar}=7.068mmHg[/tex]
Explanation:
Hello!
In this case, according to the given percent of argon in our atmosphere, it is possible to compute the pressure contributed by it as shown below:
[tex]P_{Ar}=P_{atm}*0.93\%[/tex]
Thus, we plug in to obtain:
[tex]P_{Ar}=760mmHg*0.0093\\\\P_{Ar}=7.068mmHg[/tex]
Best regards!
The pressure of the argon gas will be equal to [tex]P_{Ar}=7.068 \rm\ mmHg[/tex]
What will be the pressure of the argon gas?Pressure is defined as the normal force acting on any surface in the case of gases it is the normal force acting on the surface of the earth.
now it is given in the question that the Argon contains 0.93% part in the atmosphere.
So here are the calculations
[tex]\rm P_{Ar}=P_{Atm}\times 0.93[/tex]%
[tex]\rm P_{Ar}=700\times 0.93[/tex]%
[tex]\rm P_{Ar}=7.068\ mmHg[/tex]
Thus the pressure of the argon gas will be equal to [tex]P_{Ar}=7.068 \rm\ mmHg[/tex]
To know more about Atmospheric gases follow
https://brainly.com/question/1286223
Can any wan help pls pls
Answer:
1) food molecules enter receptors .....
2) The sensory receptors sends the message....
3) The message reaches the brain
4) the brain procces the information it recieved...
5) The brain stores the info ...
6) The brain retrieves the info . ....
(I hope its clear ! I hope its right too ;) )
Decide which element probably forms a compound with chlorine that has a chemical formula most and least similar to the chemical formula of the compound formed by chlorine and rubidium. Comparing chemical formula of compound formed with chlorine: phosphorus beryllium magnesium lithium most similar to rubidium least similar to rubidium
Answer:
Most similar - Lithium
Least similar - Phosphorus
Explanation:
Rubidium is an element in group 1A of the periodic table. It is a metal and forms an ionic compound with chlorine. The formula of the compound is RbCl.
If we look at the options, Lithium is also a group 1A element and forms an ionic compound with chlorine having the formula LiCl which is very much similar to RbCl chemically.
Phosphorus is a nonmetal. Its compounds with chlorine, PCl3 and PCl5 are covalent and does not resemble RbCl in any way.
Buffers are substances that help resist shifts in pH by Question 10 options: 1) releasing H in acidic solutions. 2) donating H to a solution when they have been depleted. 3) releasing OH- in basic solutions. 4) accepting H when the are in excess. 5) donating H to a solution when they have been depleted and accepting H when the are in excess.
Answer:
5) donating H to a solution when they have been depleted and accepting H when they are in excess.
Explanation:
A buffer solution is a solution that undergoes a negligible change in pH in addition of moderate quantities of acid or alkali. In other words, a buffer solution is one that resists a change in pH on addition or dilution of small amounts of acids or alkalis.
So, from the given question:
Buffers are substances that help resist shifts in pH by donating H to a solution when they have been depleted and accepting H when they are in excess.